in der resolv.conf steht ständig eine IP von vmware

Twilo · Beitrag von **Twilo** » 06.04.2008 11:11:37

Hallo,

seit dem ich vmware Server 1.0.5 installiert habe, habe ich ständig das Problem, dass in meiner resolv.conf ein falscher NameServer steht.

Code: Alles auswählen

dhclient;echo; cat /etc/resolv.conf;echo;
There is already a pid file /var/run/dhclient.pid with pid 7516
killed old client process, removed PID file
Internet Systems Consortium DHCP Client V3.1.0
Copyright 2004-2007 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/

Listening on LPF/eth1/00:15:f2:50:d9:5a
Sending on   LPF/eth1/00:15:f2:50:d9:5a
Listening on LPF/vmnet8/00:50:56:c0:00:08
Sending on   LPF/vmnet8/00:50:56:c0:00:08
Listening on LPF/vmnet1/00:50:56:c0:00:01
Sending on   LPF/vmnet1/00:50:56:c0:00:01
Listening on LPF/eth0/00:15:f2:50:c5:59
Sending on   LPF/eth0/00:15:f2:50:c5:59
Sending on   Socket/fallback
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 5
DHCPREQUEST on vmnet1 to 255.255.255.255 port 67
DHCPACK from 192.168.152.254
bound to 192.168.152.128 -- renewal in 774 seconds.

domain localdomain
search localdomain
nameserver 192.168.152.1

kay-desktop:~# dhclient;echo; cat /etc/resolv.conf;echo;
There is already a pid file /var/run/dhclient.pid with pid 7572
killed old client process, removed PID file
Internet Systems Consortium DHCP Client V3.1.0
Copyright 2004-2007 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/

Listening on LPF/eth1/00:15:f2:50:d9:5a
Sending on   LPF/eth1/00:15:f2:50:d9:5a
Listening on LPF/eth0/00:15:f2:50:c5:59
Sending on   LPF/eth0/00:15:f2:50:c5:59
Listening on LPF/vmnet8/00:50:56:c0:00:08
Sending on   LPF/vmnet8/00:50:56:c0:00:08
Listening on LPF/vmnet1/00:50:56:c0:00:01
Sending on   LPF/vmnet1/00:50:56:c0:00:01
Sending on   Socket/fallback
DHCPREQUEST on vmnet8 to 255.255.255.255 port 67
DHCPACK from 172.16.21.254
bound to 172.16.21.128 -- renewal in 850 seconds.

domain localdomain
search localdomain
nameserver 172.16.21.2

ein

Code: Alles auswählen

echo "nameserver 195.50.140.252" > /etc/resolv.conf; echo "nameserver 195.50.140.114" >> /etc/resolv.conf; cat /etc/resolv.conf

hilft nicht lange, da nach einer gewissen Zeit wieder falsche Einträge in der resolv.conf stehen.

Code: Alles auswählen

kay-desktop:~# ifconfig
eth0      Link encap:Ethernet  Hardware Adresse 00:15:f2:50:c5:59
          inet Adresse:192.168.123.105  Bcast:192.168.123.255  Maske:255.255.255.0
          inet6-Adresse: fe80::215:f2ff:fe50:c559/64 Gültigkeitsbereich:Verbindung
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metrik:1
          RX packets:73828 errors:0 dropped:0 overruns:0 frame:0
          TX packets:45107 errors:0 dropped:0 overruns:0 carrier:0
          Kollisionen:0 Sendewarteschlangenlänge:1000
          RX bytes:87848824 (83.7 MiB)  TX bytes:5973469 (5.6 MiB)
          Interrupt:22 Basisadresse:0x4000

eth1      Link encap:Ethernet  Hardware Adresse 00:15:f2:50:d9:5a
          UP BROADCAST MULTICAST  MTU:1500  Metrik:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          Kollisionen:0 Sendewarteschlangenlänge:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:17

lo        Link encap:Lokale Schleife
          inet Adresse:127.0.0.1  Maske:255.0.0.0
          inet6-Adresse: ::1/128 Gültigkeitsbereich:Maschine
          UP LOOPBACK RUNNING  MTU:16436  Metrik:1
          RX packets:1677 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1677 errors:0 dropped:0 overruns:0 carrier:0
          Kollisionen:0 Sendewarteschlangenlänge:0
          RX bytes:499500 (487.7 KiB)  TX bytes:499500 (487.7 KiB)

vmnet1    Link encap:Ethernet  Hardware Adresse 00:50:56:c0:00:01
          inet Adresse:192.168.152.128  Bcast:192.168.152.255  Maske:255.255.255.0
          inet6-Adresse: fe80::250:56ff:fec0:1/64 Gültigkeitsbereich:Verbindung
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metrik:1
          RX packets:16 errors:0 dropped:0 overruns:0 frame:0
          TX packets:615 errors:0 dropped:0 overruns:0 carrier:0
          Kollisionen:0 Sendewarteschlangenlänge:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

vmnet8    Link encap:Ethernet  Hardware Adresse 00:50:56:c0:00:08
          inet Adresse:172.16.21.128  Bcast:172.16.21.255  Maske:255.255.255.0
          inet6-Adresse: fe80::250:56ff:fec0:8/64 Gültigkeitsbereich:Verbindung
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metrik:1
          RX packets:23 errors:0 dropped:0 overruns:0 frame:0
          TX packets:576 errors:0 dropped:0 overruns:0 carrier:0
          Kollisionen:0 Sendewarteschlangenlänge:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

Wie kann ich das verhindern?

mfg
Twilo