neue Kernel backen -> hdb nichtmehr mounten

[n0b0dy]

hi
hab ein ziemlich seltsames und verwirrendes problem
ich benutzen debian 3.1 sarge
immer wenn ich eine neue kernel backe und installieren (2.6.10 und 2.6.11) kann ich meine hdb nichtmehr mounten
ich bekomme immer die meldung:
mount: /dev/hdb1 already mounted or /daten2 busy

wenn ich dann wieder mit der alten original kernel (2.6.8.xxx) boote kommt das selbe problem

wenn ich aber die kernel vom debian server als dep packet zeihen funktioniert alles
wenn ich den tree vom debian server ziehe und selbst backe nicht
auch wenn ich die config von der kernel vom deb server nehme, und dann mit make oldconfig konfige (nur das high memory modul wird auf 4 gb gestellt) gehts wieder nicht.


hier der auszug aus der kern.log


Apr 11 21:36:36 localhost kernel: klogd 1.4.1#16, log source = /proc/kmsg started.
Apr 11 21:36:36 localhost kernel: Inspecting /boot/System.map-2.6.11.7
Apr 11 21:36:36 localhost kernel: Loaded 27736 symbols from /boot/System.map-2.6.11.7.
Apr 11 21:36:36 localhost kernel: Symbols match kernel version 2.6.11.
Apr 11 21:36:36 localhost kernel: No module symbols loaded - kernel modules not enabled.
Apr 11 21:36:36 localhost kernel:
Apr 11 21:36:36 localhost kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Apr 11 21:36:36 localhost kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
Apr 11 21:36:36 localhost kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
Apr 11 21:36:36 localhost kernel: ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Apr 11 21:36:36 localhost kernel: ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Apr 11 21:36:36 localhost kernel: ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Apr 11 21:36:36 localhost kernel: ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Apr 11 21:36:36 localhost kernel: ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Apr 11 21:36:36 localhost kernel: ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Apr 11 21:36:36 localhost kernel: ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Apr 11 21:36:36 localhost kernel: ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Apr 11 21:36:36 localhost kernel: ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Apr 11 21:36:36 localhost kernel: ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Apr 11 21:36:36 localhost kernel: ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Apr 11 21:36:36 localhost kernel: ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Apr 11 21:36:36 localhost kernel: ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Apr 11 21:36:36 localhost kernel: ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Apr 11 21:36:36 localhost kernel: ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Apr 11 21:36:36 localhost kernel: ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Apr 11 21:36:36 localhost kernel: ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
Apr 11 21:36:36 localhost kernel: ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
Apr 11 21:36:36 localhost kernel: ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
Apr 11 21:36:36 localhost kernel: ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
Apr 11 21:36:36 localhost kernel: ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
Apr 11 21:36:36 localhost kernel: ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
Apr 11 21:36:36 localhost kernel: ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
Apr 11 21:36:36 localhost kernel: ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
Apr 11 21:36:36 localhost kernel: ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
Apr 11 21:36:36 localhost kernel: ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
Apr 11 21:36:36 localhost kernel: ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
Apr 11 21:36:36 localhost kernel: ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
Apr 11 21:36:36 localhost kernel: ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
Apr 11 21:36:36 localhost kernel: ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
Apr 11 21:36:36 localhost kernel: ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
Apr 11 21:36:36 localhost kernel: ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
Apr 11 21:36:36 localhost kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Apr 11 21:36:36 localhost kernel: pnp: PnP ACPI init
Apr 11 21:36:36 localhost kernel: pnp: PnP ACPI: found 16 devices
Apr 11 21:36:36 localhost kernel: PnPBIOS: Disabled by ACPI PNP
Apr 11 21:36:36 localhost kernel: PCI: Using ACPI for IRQ routing
Apr 11 21:36:36 localhost kernel: ** PCI interrupts are no longer routed automatically. If this
Apr 11 21:36:36 localhost kernel: ** causes a device to stop working, it is probably because the
Apr 11 21:36:36 localhost kernel: ** driver failed to call pci_enable_device(). As a temporary
Apr 11 21:36:36 localhost kernel: ** workaround, the "pci=routeirq" argument restores the old
Apr 11 21:36:36 localhost kernel: ** behavior. If this argument makes the device work again,
Apr 11 21:36:36 localhost kernel: ** please email the output of "lspci" to bjorn.helgaas@hp.com
Apr 11 21:36:36 localhost kernel: ** so I can fix the driver.
Apr 11 21:36:36 localhost kernel: pnp: 00:00: ioport range 0x4000-0x407f could not be reserved
Apr 11 21:36:36 localhost kernel: pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
Apr 11 21:36:36 localhost kernel: pnp: 00:00: ioport range 0x4400-0x447f has been reserved
Apr 11 21:36:36 localhost kernel: pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved
Apr 11 21:36:36 localhost kernel: pnp: 00:00: ioport range 0x4200-0x427f has been reserved
Apr 11 21:36:36 localhost kernel: pnp: 00:00: ioport range 0x4280-0x42ff has been reserved
Apr 11 21:36:36 localhost kernel: pnp: 00:01: ioport range 0x5000-0x503f has been reserved
Apr 11 21:36:36 localhost kernel: pnp: 00:01: ioport range 0x5100-0x513f has been reserved
Apr 11 21:36:36 localhost kernel: highmem bounce pool size: 64 pages
Apr 11 21:36:36 localhost kernel: VFS: Disk quotas dquot_6.5.1
Apr 11 21:36:36 localhost kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Apr 11 21:36:36 localhost kernel: devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
Apr 11 21:36:36 localhost kernel: devfs: boot_options: 0x0
Apr 11 21:36:36 localhost kernel: NTFS driver 2.1.22 [Flags: R/W DEBUG].
Apr 11 21:36:36 localhost kernel: Initializing Cryptographic API
Apr 11 21:36:36 localhost kernel: fb0: Virtual frame buffer device, using 1024K of video memory
Apr 11 21:36:36 localhost kernel: isapnp: Scanning for PnP cards...
Apr 11 21:36:36 localhost kernel: isapnp: No Plug & Play device found
Apr 11 21:36:36 localhost kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Apr 11 21:36:36 localhost kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Apr 11 21:36:36 localhost kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
Apr 11 21:36:36 localhost kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Apr 11 21:36:36 localhost kernel: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Apr 11 21:36:36 localhost kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Apr 11 21:36:36 localhost kernel: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Apr 11 21:36:36 localhost kernel: io scheduler noop registered
Apr 11 21:36:36 localhost kernel: io scheduler anticipatory registered
Apr 11 21:36:36 localhost kernel: io scheduler deadline registered
Apr 11 21:36:36 localhost kernel: io scheduler cfq registered
Apr 11 21:36:36 localhost kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Apr 11 21:36:36 localhost kernel: input: AT Translated Set 2 keyboard on isa0060/serio0
Apr 11 21:36:36 localhost kernel: EISA: Probing bus 0 at eisa0
Apr 11 21:36:36 localhost kernel: Cannot allocate resource for EISA slot 4
Apr 11 21:36:36 localhost kernel: Cannot allocate resource for EISA slot 5
Apr 11 21:36:36 localhost kernel: EISA: Detected 0 cards.
Apr 11 21:36:36 localhost kernel: NET: Registered protocol family 2
Apr 11 21:36:36 localhost kernel: IP: routing cache hash table of 8192 buckets, 64Kbytes
Apr 11 21:36:36 localhost kernel: TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
Apr 11 21:36:36 localhost kernel: TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
Apr 11 21:36:36 localhost kernel: TCP: Hash tables configured (established 262144 bind 65536)
Apr 11 21:36:36 localhost kernel: NET: Registered protocol family 8
Apr 11 21:36:36 localhost kernel: NET: Registered protocol family 20
Apr 11 21:36:36 localhost kernel: ACPI wakeup devices:
Apr 11 21:36:36 localhost kernel: HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1
Apr 11 21:36:36 localhost kernel: ACPI: (supports S0 S1 S4 S5)
Apr 11 21:36:36 localhost kernel: RAMDISK: cramfs filesystem found at block 0
Apr 11 21:36:36 localhost kernel: RAMDISK: Loading 4180KiB [1 disk] into ram disk... |^H/^H-^H\^H|^H/^H-^H\^H|^....
Apr 11 21:36:36 localhost kernel: VFS: Mounted root (cramfs filesystem) readonly.
Apr 11 21:36:36 localhost kernel: Freeing unused kernel memory: 236k freed
Apr 11 21:36:36 localhost kernel: NET: Registered protocol family 1
Apr 11 21:36:36 localhost kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Apr 11 21:36:36 localhost kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Apr 11 21:36:36 localhost kernel: NFORCE2: IDE controller at PCI slot 0000:00:09.0
Apr 11 21:36:36 localhost kernel: NFORCE2: chipset revision 162
Apr 11 21:36:36 localhost kernel: NFORCE2: not 100%% native mode: will probe irqs later
Apr 11 21:36:36 localhost kernel: NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
Apr 11 21:36:36 localhost kernel: NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
Apr 11 21:36:36 localhost kernel: ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hdaGrinsen MA, hdbGrinsen MA
Apr 11 21:36:36 localhost kernel: ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdcGrinsen MA, hddGrinsen MA
Apr 11 21:36:36 localhost kernel: Probing IDE interface ide0...
Apr 11 21:36:36 localhost kernel: hda: IC35L180AVV207-1, ATA DISK drive
Apr 11 21:36:36 localhost kernel: hdb: HDS728080PLAT20, ATA DISK drive
Apr 11 21:36:36 localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Apr 11 21:36:36 localhost kernel: Probing IDE interface ide1...
Apr 11 21:36:36 localhost kernel: hdc: _NEC DVD_RW ND-1300A, ATAPI CD/DVD-ROM drive
Apr 11 21:36:36 localhost kernel: hdd: LTN526S, ATAPI CD/DVD-ROM drive
Apr 11 21:36:36 localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15
Apr 11 21:36:36 localhost kernel: Probing IDE interface ide2...
Apr 11 21:36:36 localhost kernel: Probing IDE interface ide3...
Apr 11 21:36:36 localhost kernel: Probing IDE interface ide4...
Apr 11 21:36:36 localhost kernel: Probing IDE interface ide5...
Apr 11 21:36:36 localhost kernel: hda: max request size: 1024KiB
Apr 11 21:36:36 localhost kernel: hda: 361882080 sectors (185283 MB) w/7965KiB Cache, CHS=22526/255/63, UDMA(100)
Apr 11 21:36:36 localhost kernel: hda: cache flushes supported
Apr 11 21:36:36 localhost kernel: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 >
Apr 11 21:36:36 localhost kernel: hdb: max request size: 1024KiB
Apr 11 21:36:36 localhost kernel: hdb: 160836480 sectors (82348 MB) w/1719KiB Cache, CHS=16383/255/63, UDMA(133)
Apr 11 21:36:36 localhost kernel: hdb: cache flushes supported
Apr 11 21:36:36 localhost kernel: /dev/ide/host0/bus0/target1/lun0: p1
Apr 11 21:36:36 localhost kernel: VFS: Can't find ext3 filesystem on dev hda1.
Apr 11 21:36:36 localhost kernel: VFS: Can't find an ext2 filesystem on dev hda1.
Apr 11 21:36:36 localhost kernel: ReiserFS: hda1: found reiserfs format "3.6" with standard journal
Apr 11 21:36:36 localhost kernel: ReiserFS: hda1: using ordered data mode
Apr 11 21:36:36 localhost kernel: ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Apr 11 21:36:36 localhost kernel: ReiserFS: hda1: checking transaction log (hda1)
Apr 11 21:36:36 localhost kernel: ReiserFS: hda1: Using r5 hash to sort names
Apr 11 21:36:36 localhost kernel: Adding 2441840k swap on /dev/hda6. Priority:-1 extents:1
Apr 11 21:36:36 localhost kernel: hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Apr 11 21:36:36 localhost kernel: Uniform CD-ROM driver Revision: 3.20
Apr 11 21:36:36 localhost kernel: hdd: ATAPI 52X CD-ROM drive, 120kB Cache, UDMA(33)
Apr 11 21:36:36 localhost kernel: ieee1394: Initialized config rom entry `ip1394'
Apr 11 21:36:36 localhost kernel: SCSI subsystem initialized
Apr 11 21:36:36 localhost kernel: sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
Apr 11 21:36:36 localhost kernel: device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
Apr 11 21:36:36 localhost kernel: cdrom: open failed.
Apr 11 21:36:36 localhost kernel: cdrom: open failed.
Apr 11 21:36:36 localhost kernel: device-mapper: dm-linear: Device lookup failed
Apr 11 21:36:36 localhost kernel: device-mapper: error adding target to table
Apr 11 21:36:36 localhost kernel: device-mapper: dm-linear: Device lookup failed
Apr 11 21:36:36 localhost kernel: device-mapper: error adding target to table
Apr 11 21:36:36 localhost kernel: device-mapper: dm-linear: Device lookup failed
Apr 11 21:36:36 localhost kernel: device-mapper: error adding target to table
Apr 11 21:36:36 localhost kernel: device-mapper: dm-linear: Device lookup failed
Apr 11 21:36:36 localhost kernel: device-mapper: error adding target to table
Apr 11 21:36:36 localhost kernel: device-mapper: dm-linear: Device lookup failed
Apr 11 21:36:36 localhost kernel: device-mapper: error adding target to table
Apr 11 21:36:36 localhost kernel: device-mapper: dm-linear: Device lookup failed
Apr 11 21:36:36 localhost kernel: device-mapper: error adding target to table
Apr 11 21:36:36 localhost kernel: device-mapper: dm-linear: Device lookup failed
Apr 11 21:36:36 localhost kernel: device-mapper: error adding target to table
Apr 11 21:36:36 localhost kernel: device-mapper: dm-linear: Device lookup failed
Apr 11 21:36:36 localhost kernel: device-mapper: error adding target to table
Apr 11 21:36:36 localhost kernel: device-mapper: dm-linear: Device lookup failed
Apr 11 21:36:36 localhost kernel: device-mapper: error adding target to table
Apr 11 21:36:36 localhost kernel: device-mapper: dm-linear: Device lookup failed
Apr 11 21:36:36 localhost kernel: device-mapper: error adding target to table
Apr 11 21:36:36 localhost kernel: device-mapper: dm-linear: Device lookup failed
Apr 11 21:36:36 localhost kernel: device-mapper: error adding target to table
Apr 11 21:36:36 localhost kernel: device-mapper: dm-linear: Device lookup failed
Apr 11 21:36:36 localhost kernel: device-mapper: error adding target to table
Apr 11 21:36:36 localhost kernel: device-mapper: dm-linear: Device lookup failed
Apr 11 21:36:36 localhost kernel: device-mapper: error adding target to table
Apr 11 21:36:36 localhost kernel: device-mapper: dm-linear: Device lookup failed
Apr 11 21:36:36 localhost kernel: device-mapper: error adding target to table
Apr 11 21:36:36 localhost kernel: device-mapper: dm-linear: Device lookup failed
Apr 11 21:36:36 localhost kernel: device-mapper: error adding target to table
Apr 11 21:36:36 localhost kernel: device-mapper: dm-linear: Device lookup failed
Apr 11 21:36:36 localhost kernel: device-mapper: error adding target to table
Apr 11 21:36:36 localhost kernel: device-mapper: dm-linear: Device lookup failed
Apr 11 21:36:36 localhost kernel: device-mapper: error adding target to table
Apr 11 21:36:36 localhost kernel: device-mapper: dm-linear: Device lookup failed
Apr 11 21:36:36 localhost kernel: device-mapper: error adding target to table
Apr 11 21:36:36 localhost kernel: device-mapper: dm-linear: Device lookup failed
Apr 11 21:36:36 localhost kernel: device-mapper: error adding target to table
Apr 11 21:36:36 localhost kernel: device-mapper: dm-linear: Device lookup failed
Apr 11 21:36:36 localhost kernel: device-mapper: error adding target to table
Apr 11 21:36:36 localhost kernel: device-mapper: dm-linear: Device lookup failed
Apr 11 21:36:36 localhost kernel: device-mapper: error adding target to table
Apr 11 21:36:36 localhost kernel: device-mapper: dm-linear: Device lookup failed
Apr 11 21:36:36 localhost kernel: device-mapper: error adding target to table
Apr 11 21:36:36 localhost kernel: device-mapper: dm-linear: Device lookup failed
Apr 11 21:36:36 localhost kernel: device-mapper: error adding target to table
Apr 11 21:36:36 localhost kernel: device-mapper: dm-linear: Device lookup failed
Apr 11 21:36:36 localhost kernel: device-mapper: error adding target to table
Apr 11 21:36:36 localhost kernel: ReiserFS: hda5: found reiserfs format "3.6" with standard journal
Apr 11 21:36:36 localhost kernel: ReiserFS: hda5: using ordered data mode
Apr 11 21:36:36 localhost kernel: ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Apr 11 21:36:36 localhost kernel: ReiserFS: hda5: checking transaction log (hda5)
Apr 11 21:36:36 localhost kernel: ReiserFS: hda5: Using r5 hash to sort names
Apr 11 21:36:36 localhost kernel: ReiserFS: hda7: found reiserfs format "3.6" with standard journal
Apr 11 21:36:36 localhost kernel: ReiserFS: hda7: using ordered data mode
Apr 11 21:36:36 localhost kernel: ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Apr 11 21:36:36 localhost kernel: ReiserFS: hda7: checking transaction log (hda7)
Apr 11 21:36:36 localhost kernel: ReiserFS: hda7: Using r5 hash to sort names
Apr 11 21:36:36 localhost kernel: Linux agpgart interface v0.100 (c) Dave Jones
Apr 11 21:36:36 localhost kernel: ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
Apr 11 21:36:36 localhost kernel: ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 5
Apr 11 21:36:36 localhost kernel: PCI: setting IRQ 5 as level-triggered
Apr 11 21:36:36 localhost kernel: ACPI: PCI interrupt 0000:01:0d.0[A] Pfeil rechts GSI 5 (level, low) Pfeil rechts IRQ 5
Apr 11 21:36:36 localhost kernel: ohci1394: fw-host0: Unexpected PCI resource length of 1000!
Apr 11 21:36:36 localhost kernel: ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[5] MMIO=[e6082000-e60827ff] Max Packet=[2048]
Apr 11 21:36:36 localhost kernel: forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.31.
Apr 11 21:36:36 localhost kernel: ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 11
Apr 11 21:36:36 localhost kernel: PCI: setting IRQ 11 as level-triggered
Apr 11 21:36:36 localhost kernel: ACPI: PCI interrupt 0000:00:04.0[A] Pfeil rechts GSI 11 (level, low) Pfeil rechts IRQ 11
Apr 11 21:36:36 localhost kernel: PCI: Setting latency timer of device 0000:00:04.0 to 64
Apr 11 21:36:36 localhost kernel: eth0: forcedeth.c: subsystem: 01695:1000 bound to 0000:00:04.0
Apr 11 21:36:36 localhost kernel: 8139too Fast Ethernet driver 0.9.27
Apr 11 21:36:36 localhost kernel: ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 5
Apr 11 21:36:36 localhost kernel: ACPI: PCI interrupt 0000:01:0b.0[A] Pfeil rechts GSI 5 (level, low) Pfeil rechts IRQ 5
Apr 11 21:36:36 localhost kernel: eth1: RealTek RTL8139 at 0x9000, 00:04:61:4a:1b:f4, IRQ 5
Apr 11 21:36:36 localhost kernel: eth1: Identified 8139 chip type 'RTL-8101'
Apr 11 21:36:36 localhost kernel: libata version 1.10 loaded.
Apr 11 21:36:36 localhost kernel: sata_sil version 0.8
Apr 11 21:36:36 localhost kernel: ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
Apr 11 21:36:36 localhost kernel: ACPI: PCI interrupt 0000:01:0c.0[A] Pfeil rechts GSI 11 (level, low) Pfeil rechts IRQ 11
Apr 11 21:36:36 localhost kernel: ata1: SATA max UDMA/100 cmd 0xF8DFC080 ctl 0xF8DFC08A bmdma 0xF8DFC000 irq 11
Apr 11 21:36:36 localhost kernel: ata2: SATA max UDMA/100 cmd 0xF8DFC0C0 ctl 0xF8DFC0CA bmdma 0xF8DFC008 irq 11
Apr 11 21:36:36 localhost kernel: ata1: no device found (phy stat 00000000)
Apr 11 21:36:36 localhost kernel: scsi0 : sata_sil
Apr 11 21:36:36 localhost kernel: ieee1394: Host added: ID:BUS[0-00:1023] GUID[000461000003e3d2]
Apr 11 21:36:36 localhost kernel: ata2: no device found (phy stat 00000000)
Apr 11 21:36:36 localhost kernel: scsi1 : sata_sil
Apr 11 21:36:36 localhost kernel: eth1394: $Rev: 1224 $ Ben Collins <bcollins@debian.org>
Apr 11 21:36:36 localhost kernel: eth1394: eth2: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
Apr 11 21:36:36 localhost kernel: Intel 810 + AC97 Audio, version 1.01, 23:17:41 Apr 10 2005
Apr 11 21:36:36 localhost kernel: ACPI: PCI Interrupt Link [LACI] enabled at IRQ 11
Apr 11 21:36:36 localhost kernel: ACPI: PCI interrupt 0000:00:06.0[A] Pfeil rechts GSI 11 (level, low) Pfeil rechts IRQ 11
Apr 11 21:36:36 localhost kernel: PCI: Setting latency timer of device 0000:00:06.0 to 64
Apr 11 21:36:36 localhost kernel: i810: NVIDIA nForce Audio found at IO 0xb800 and 0xb400, MEM 0x0000 and 0x0000, IRQ 11
Apr 11 21:36:36 localhost kernel: i810_audio: Audio Controller supports 6 channels.
Apr 11 21:36:36 localhost kernel: i810_audio: Defaulting to base 2 channel mode.
Apr 11 21:36:36 localhost kernel: i810_audio: Resetting connection 0
Apr 11 21:36:36 localhost kernel: ac97_codec: AC97 codec, id: CMI97 (CMedia)
Apr 11 21:36:36 localhost kernel: AC97 codec does not have proper volume support.
Apr 11 21:36:36 localhost kernel: i810_audio: only 48Khz playback available.
Apr 11 21:36:36 localhost kernel: i810_audio: AC'97 codec 0, new EID value = 0x05c6
Apr 11 21:36:36 localhost kernel: i810_audio: AC'97 codec 0, DAC map configured, total channels = 6
Apr 11 21:36:36 localhost kernel: i810_audio: setting clocking to 48648
Apr 11 21:36:36 localhost kernel: usbcore: registered new driver usbfs
Apr 11 21:36:36 localhost kernel: usbcore: registered new driver hub
Apr 11 21:36:36 localhost kernel: ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
Apr 11 21:36:36 localhost kernel: ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 10
Apr 11 21:36:36 localhost kernel: PCI: setting IRQ 10 as level-triggered
Apr 11 21:36:36 localhost kernel: ACPI: PCI interrupt 0000:00:02.0[A] Pfeil rechts GSI 10 (level, low) Pfeil rechts IRQ 10
Apr 11 21:36:36 localhost kernel: ohci_hcd 0000:00:02.0: nVidia Corporation nForce2 USB Controller
Apr 11 21:36:36 localhost kernel: PCI: Setting latency timer of device 0000:00:02.0 to 64
Apr 11 21:36:36 localhost kernel: ohci_hcd 0000:00:02.0: irq 10, pci mem 0xe7003000
Apr 11 21:36:36 localhost kernel: ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
Apr 11 21:36:36 localhost kernel: hub 1-0:1.0: USB hub found
Apr 11 21:36:36 localhost kernel: hub 1-0:1.0: 3 ports detected
Apr 11 21:36:36 localhost kernel: ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 5
Apr 11 21:36:36 localhost kernel: ACPI: PCI interrupt 0000:00:02.1[B] Pfeil rechts GSI 5 (level, low) Pfeil rechts IRQ 5
Apr 11 21:36:36 localhost kernel: ohci_hcd 0000:00:02.1: nVidia Corporation nForce2 USB Controller (#2)
Apr 11 21:36:36 localhost kernel: PCI: Setting latency timer of device 0000:00:02.1 to 64
Apr 11 21:36:36 localhost kernel: ohci_hcd 0000:00:02.1: irq 5, pci mem 0xe7004000
Apr 11 21:36:36 localhost kernel: ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
Apr 11 21:36:36 localhost kernel: hub 2-0:1.0: USB hub found
Apr 11 21:36:36 localhost kernel: hub 2-0:1.0: 3 ports detected
Apr 11 21:36:36 localhost kernel: ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 11
Apr 11 21:36:36 localhost kernel: ACPI: PCI interrupt 0000:00:02.2[C] Pfeil rechts GSI 11 (level, low) Pfeil rechts IRQ 11
Apr 11 21:36:36 localhost kernel: ehci_hcd 0000:00:02.2: nVidia Corporation nForce2 USB Controller
Apr 11 21:36:36 localhost kernel: PCI: Setting latency timer of device 0000:00:02.2 to 64
Apr 11 21:36:36 localhost kernel: ehci_hcd 0000:00:02.2: irq 11, pci mem 0xe7005000
Apr 11 21:36:36 localhost kernel: ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
Apr 11 21:36:36 localhost kernel: PCI: cache line size of 64 is not supported by device 0000:00:02.2
Apr 11 21:36:36 localhost kernel: ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
Apr 11 21:36:36 localhost kernel: hub 3-0:1.0: USB hub found
Apr 11 21:36:36 localhost kernel: hub 3-0:1.0: 6 ports detected
Apr 11 21:36:36 localhost kernel: agpgart: Detected NVIDIA nForce2 chipset
Apr 11 21:36:36 localhost kernel: agpgart: Maximum main memory to use for agp memory: 941M
Apr 11 21:36:36 localhost kernel: agpgart: AGP aperture is 64M @ 0xe0000000
Apr 11 21:36:36 localhost kernel: i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
Apr 11 21:36:36 localhost kernel: i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5100
Apr 11 21:36:36 localhost kernel: cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
Apr 11 21:36:36 localhost kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Apr 11 21:36:36 localhost kernel: shpchp: shpc_init : shpc_cap_offset == 0
Apr 11 21:36:36 localhost kernel: shpchp: shpc_init : shpc_cap_offset == 0
Apr 11 21:36:36 localhost kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Apr 11 21:36:36 localhost kernel: 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
Apr 11 21:36:36 localhost kernel: Real Time Clock Driver v1.12
Apr 11 21:36:36 localhost kernel: input: PC Speaker
Apr 11 21:36:36 localhost kernel: FDC 0 is a post-1991 82077
Apr 11 21:36:36 localhost kernel: parport: PnPBIOS parport detected.
Apr 11 21:36:36 localhost kernel: parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Apr 11 21:36:36 localhost kernel: input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1
Apr 11 21:36:36 localhost kernel: ts: Compaq touchscreen protocol output
Apr 11 21:36:36 localhost kernel: mice: PS/2 mouse device common for all mice
Apr 11 21:36:36 localhost kernel: NET: Registered protocol family 17
Apr 11 21:36:39 localhost kernel: lp0: using parport0 (interrupt-driven).
Apr 11 21:36:42 localhost kernel: NET: Registered protocol family 5
Apr 11 21:37:26 localhost kernel: NET: Registered protocol family 10
Apr 11 21:37:26 localhost kernel: Disabled Privacy Extensions on device c03136a0(lo)
Apr 11 21:37:26 localhost kernel: IPv6 over IPv4 tunneling driver
Apr 11 21:37:37 localhost kernel: eth0: no IPv6 routers present

[n0b0dy]

:) problem hat sich gelöst
da ich debian stable benutze sind einige libs und so veraltet
hab einfach mal schnell alles neu gemacht und alle backport packete installiert und dann gebacken .. volla es geht :)
einziges problem: mit dem ganzen backports hab ich mir mein system gef*ck, und jetzt geht nahezu nichtsmehr ohne ner stunde verzögerung.
jemand ne ahnung wo ich eine komplette liste aller libs und versionen die ich für 2.6.11 brauche herbekommen ?

[KBDCALLS]

Irgenwie ist das seltsam was du schreibst . Oben schreibst du, du benutzt Sarge, und jetzt plötzlich Woody

[n0b0dy]

nein ich benutze sarge stable ..
das mit dem backports hat mir nur jemand geraten der anscheinend woody benutzt
und ich habs einfach auch mal mit meinem sarge probiert
und es ging
anscheinend sind bei sarge stable auch einige libs total alt.
muss jetzt nurnoch rausfinden welche libs ich wirklich brauche

[KBDCALLS]

Entweder benutzt Woody das ist die Momentan noch die aktuelle Stable, aber mittlerweile total veraltet. . Oder Sarge das ist noch Testing, soll aber demnächst Stable werden und Woody ablösen. Und wenn du tatsächlich die Backports von Woody in dein Sarge installiert hast dann hast du ein heilloses durcheinander angerichtet.

[meandtheshell]

nein ich benutze sarge stable ..

das glaube ich nicht - sarge ist testing und woody stable

das mit dem backports hat mir nur jemand geraten der anscheinend woody benutzt
und ich habs einfach auch mal mit meinem sarge probiert
und es ging
anscheinend sind bei sarge stable auch einige libs total alt.
muss jetzt nurnoch rausfinden welche libs ich wirklich brauche

uiuiui - langsam ... backports haben den sinn das man unter einem relase das alt aber stabil ist (woody) dinge von releases einsezten kann die aktueller sind (sarge/sid) - d.h. ein packet wird explizit für diesen zweck gebackportet

mein rat an dich
verw. sarge oder sid und lass den sinnlosen workaround mit backports unter sarge sein - was ja ansich schon keinen sinn macht ...

[n0b0dy]

jupp war wirklich n heilloses durcheinander .. aber jetzt weis ich zumindenst das es wirklich an den fehlenden/veralteten libs lag
bei der sarge installation kann man doch am anfang bei der installation auswählen ob testing, unstable, oder stable pakete benutzt werden soll.
da meinte ich das stable

[KBDCALLS]

Falsch, wenn ich eine DVD oder CD habe wo Sarge/Testing draufsteht dann ist das da Sarge/Testing drinn, da ist nichts mit Auswählen zwischen stable und testing, was ich allerdings wählen kann ob mit einem Kernel 2.4.27 oder Kernel 2.6.8 installiert wird.