ich bekomme meine Hauppauge DEC3000-s einfach nicht zum laufen (unter Debian Sarge / Kernel 2.6.11). Nach dem einstecken meldet die xconsole oder dmesg folgendes:
Apr 18 22:29:54 localhost kernel: usb 3-2: new full speed USB device using ohci_hcd and address 25
Apr 18 22:29:54 localhost kernel: DVB: registering new adapter (DEC3000-s).
Apr 18 22:29:54 localhost kernel: DVB: registering frontend 0 (TechnoTrend/Hauppauge DEC3000-s Frontend)...
Apr 18 22:29:57 localhost udev[24522]: configured rule in ’/etc/udev/rules.d/udev.rules[36]’ applied, ’dvb0.dvr0’ becomes ’%c’
Apr 18 22:29:57 localhost udev[24522]: creating device node ’/dev/dvb/adapter0/dvr0’
Apr 18 22:29:57 localhost udev[24523]: configured rule in ’/etc/udev/rules.d/udev.rules[36]’ applied, ’dvb0.net0’ becomes ’%c’
Apr 18 22:29:57 localhost udev[24523]: creating device node ’/dev/dvb/adapter0/net0’
Apr 18 22:29:57 localhost udev[24524]: configured rule in ’/etc/udev/rules.d/udev.rules[36]’ applied, ’dvb0.frontend0’ becomes ’%c’
Apr 18 22:29:57 localhost udev[24524]: creating device node ’/dev/dvb/adapter0/frontend0’
Apr 18 22:29:57 localhost udev[24521]: configured rule in ’/etc/udev/rules.d/udev.rules[36]’ applied, ’dvb0.demux0’ becomes ’%c’
Apr 18 22:29:57 localhost udev[24521]: creating device node ’/dev/dvb/adapter0/demux0’
Apr 18 22:29:58 localhost usb.agent[24619]: ttusb_dec: already loaded
Scheint also alles korrekt zu sein, aber nach dem Aufruf von:
szap „Sender“ -r –> kommen folgende Fehlermeldungen:
Apr 18 22:30:09 localhost kernel: usb 3-2: szap timed out on ep4in
Apr 18 22:30:09 localhost kernel: ttusb_dec_send_command: result bulk message failed: error -110
Apr 18 22:30:10 localhost kernel: usb 3-2: szap timed out on ep4in
Apr 18 22:30:10 localhost kernel: ttusb_dec_send_command: result bulk message failed: error -110
javascript:emoticon(':x')
Kann mir jemand helfen?
cu
cave
