smartd: number of Error Log entries increased from 19 to 21

Hast Du Probleme mit Hardware, die durch die anderen Foren nicht abgedeckt werden? Schau auch in den "Tipps und Tricks"-Bereich.
Antworten
letzter3
Beiträge: 477
Registriert: 16.07.2011 22:07:31

smartd: number of Error Log entries increased from 19 to 21

Beitrag von letzter3 » 30.11.2024 23:52:59

Moin zusammen,
Die smartd-Überwachung meldet seit einigen Tagen ansteigende Log-Einträge.
LEider kann ich damit überhauüt nichts anfangen, kann jemand erleuchten?

Code: Alles auswählen

The following warning/error was logged by the smartd daemon:

Device: /dev/disk/by-id/nvme-Samsung_SSD_960_EVO_250GB_S3ESNX0J951719J, number of Error Log entries increased from 19 to 21

Device info:
Samsung SSD 960 EVO 250GB, S/N:S3ESNX0J951719J, FW:2B7QCXE7, NSID:1, 250 GB

Code: Alles auswählen

root@openmediavault:~# smartctl -i /dev/nvme0n1p1
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-28-amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Number:                       Samsung SSD 960 EVO 250GB
Serial Number:                      S3ESNX0J951719J
Firmware Version:                   2B7QCXE7
PCI Vendor/Subsystem ID:            0x144d
IEEE OUI Identifier:                0x002538
Total NVM Capacity:                 250.059.350.016 [250 GB]
Unallocated NVM Capacity:           0
Controller ID:                      2
NVMe Version:                       1.2
Number of Namespaces:               1
Namespace 1 Size/Capacity:          250.059.350.016 [250 GB]
Namespace 1 Utilization:            249.239.138.304 [249 GB]
Namespace 1 Formatted LBA Size:     512
Namespace 1 IEEE EUI-64:            002538 5971b0fc41
Local Time is:                      Sat Nov 30 23:34:06 2024 CET

Code: Alles auswählen

root@openmediavault:~# smartctl -c /dev/nvme0n1p1
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-28-amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Firmware Updates (0x16):            3 Slots, no Reset required
Optional Admin Commands (0x0007):   Security Format Frmw_DL
Optional NVM Commands (0x001f):     Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat
Log Page Attributes (0x03):         S/H_per_NS Cmd_Eff_Lg
Maximum Data Transfer Size:         512 Pages
Warning  Comp. Temp. Threshold:     77 Celsius
Critical Comp. Temp. Threshold:     79 Celsius

Supported Power States
St Op     Max   Active     Idle   RL RT WL WT  Ent_Lat  Ex_Lat
 0 +     6.04W       -        -    0  0  0  0        0       0
 1 +     5.09W       -        -    1  1  1  1        0       0
 2 +     4.08W       -        -    2  2  2  2        0       0
 3 -   0.0400W       -        -    3  3  3  3      210    1500
 4 -   0.0050W       -        -    4  4  4  4     2200    6000

Supported LBA Sizes (NSID 0x1)
Id Fmt  Data  Metadt  Rel_Perf
 0 +     512       0         0

Code: Alles auswählen

root@openmediavault:~# smartctl -t short /dev/nvme0n1p1
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-28-amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org

NVMe device successfully opened

Use 'smartctl -a' (or '-x') to print SMART (and more) information

root@openmediavault:~# smartctl -a /dev/nvme0n1p1
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-28-amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Number:                       Samsung SSD 960 EVO 250GB
Serial Number:                      S3ESNX0J951719J
Firmware Version:                   2B7QCXE7
PCI Vendor/Subsystem ID:            0x144d
IEEE OUI Identifier:                0x002538
Total NVM Capacity:                 250.059.350.016 [250 GB]
Unallocated NVM Capacity:           0
Controller ID:                      2
NVMe Version:                       1.2
Number of Namespaces:               1
Namespace 1 Size/Capacity:          250.059.350.016 [250 GB]
Namespace 1 Utilization:            249.239.138.304 [249 GB]
Namespace 1 Formatted LBA Size:     512
Namespace 1 IEEE EUI-64:            002538 5971b0fc41
Local Time is:                      Sat Nov 30 23:37:02 2024 CET
Firmware Updates (0x16):            3 Slots, no Reset required
Optional Admin Commands (0x0007):   Security Format Frmw_DL
Optional NVM Commands (0x001f):     Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat
Log Page Attributes (0x03):         S/H_per_NS Cmd_Eff_Lg
Maximum Data Transfer Size:         512 Pages
Warning  Comp. Temp. Threshold:     77 Celsius
Critical Comp. Temp. Threshold:     79 Celsius

Supported Power States
St Op     Max   Active     Idle   RL RT WL WT  Ent_Lat  Ex_Lat
 0 +     6.04W       -        -    0  0  0  0        0       0
 1 +     5.09W       -        -    1  1  1  1        0       0
 2 +     4.08W       -        -    2  2  2  2        0       0
 3 -   0.0400W       -        -    3  3  3  3      210    1500
 4 -   0.0050W       -        -    4  4  4  4     2200    6000

Supported LBA Sizes (NSID 0x1)
Id Fmt  Data  Metadt  Rel_Perf
 0 +     512       0         0

=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART/Health Information (NVMe Log 0x02)
Critical Warning:                   0x00
Temperature:                        28 Celsius
Available Spare:                    100%
Available Spare Threshold:          10%
Percentage Used:                    13%
Data Units Read:                    4.675.284 [2,39 TB]
Data Units Written:                 16.702.873 [8,55 TB]
Host Read Commands:                 35.417.719
Host Write Commands:                451.479.017
Controller Busy Time:               1.992
Power Cycles:                       408
Power On Hours:                     6.112
Unsafe Shutdowns:                   26
Media and Data Integrity Errors:    0
Error Information Log Entries:      22
Warning  Comp. Temperature Time:    0
Critical Comp. Temperature Time:    0
Temperature Sensor 1:               28 Celsius
Temperature Sensor 2:               36 Celsius

Error Information (NVMe Log 0x01, 16 of 64 entries)
Num   ErrCount  SQId   CmdId  Status  PELoc          LBA  NSID    VS
  0         22     0  0x8008  0x4004      -            0     1     -
  1         21     0  0x300a  0x4004      -            0     0     -
  2         20     0  0x300f  0x4004      -            0     1     -
  3         19     0  0x0008  0x4004      -            0     0     -
  4         18     0  0x0012  0x4004      -            0     1     -
  5         17     0  0x300e  0x4004      -            0     0     -
  6         16     0  0xd00b  0x4004      -            0     1     -
  7         15     0  0x1013  0x4004      -            0     1     -
  8         14     0  0xd010  0x4004      -            0     0     -
  9         13     0  0x1011  0x4004      -            0     0     -
 10         12     0  0xe013  0x4004      -            0     0     -
 11         11     0  0x5010  0x4004      -            0     0     -
 12         10     0  0x3012  0x4004      -            0     0     -
 13          9     0  0xb00b  0x4004      -            0     0     -
 14          8     0  0x0008  0x4004      -            0     0     -
 15          7     0  0xb017  0x4004      -            0     0     -
... (48 entries not read)

Code: Alles auswählen

root@openmediavault:~# smartctl -tlong /dev/nvme0n1p1
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-28-amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org

NVMe device successfully opened

Use 'smartctl -a' (or '-x') to print SMART (and more) information

root@openmediavault:~# smartctl -a /dev/nvme0n1p1
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-28-amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Number:                       Samsung SSD 960 EVO 250GB
Serial Number:                      S3ESNX0J951719J
Firmware Version:                   2B7QCXE7
PCI Vendor/Subsystem ID:            0x144d
IEEE OUI Identifier:                0x002538
Total NVM Capacity:                 250.059.350.016 [250 GB]
Unallocated NVM Capacity:           0
Controller ID:                      2
NVMe Version:                       1.2
Number of Namespaces:               1
Namespace 1 Size/Capacity:          250.059.350.016 [250 GB]
Namespace 1 Utilization:            249.239.138.304 [249 GB]
Namespace 1 Formatted LBA Size:     512
Namespace 1 IEEE EUI-64:            002538 5971b0fc41
Local Time is:                      Sat Nov 30 23:43:09 2024 CET
Firmware Updates (0x16):            3 Slots, no Reset required
Optional Admin Commands (0x0007):   Security Format Frmw_DL
Optional NVM Commands (0x001f):     Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat
Log Page Attributes (0x03):         S/H_per_NS Cmd_Eff_Lg
Maximum Data Transfer Size:         512 Pages
Warning  Comp. Temp. Threshold:     77 Celsius
Critical Comp. Temp. Threshold:     79 Celsius

Supported Power States
St Op     Max   Active     Idle   RL RT WL WT  Ent_Lat  Ex_Lat
 0 +     6.04W       -        -    0  0  0  0        0       0
 1 +     5.09W       -        -    1  1  1  1        0       0
 2 +     4.08W       -        -    2  2  2  2        0       0
 3 -   0.0400W       -        -    3  3  3  3      210    1500
 4 -   0.0050W       -        -    4  4  4  4     2200    6000

Supported LBA Sizes (NSID 0x1)
Id Fmt  Data  Metadt  Rel_Perf
 0 +     512       0         0

=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART/Health Information (NVMe Log 0x02)
Critical Warning:                   0x00
Temperature:                        29 Celsius
Available Spare:                    100%
Available Spare Threshold:          10%
Percentage Used:                    13%
Data Units Read:                    4.675.284 [2,39 TB]
Data Units Written:                 16.702.910 [8,55 TB]
Host Read Commands:                 35.417.720
Host Write Commands:                451.481.159
Controller Busy Time:               1.992
Power Cycles:                       408
Power On Hours:                     6.112
Unsafe Shutdowns:                   26
Media and Data Integrity Errors:    0
Error Information Log Entries:      22
Warning  Comp. Temperature Time:    0
Critical Comp. Temperature Time:    0
Temperature Sensor 1:               29 Celsius
Temperature Sensor 2:               36 Celsius

Error Information (NVMe Log 0x01, 16 of 64 entries)
Num   ErrCount  SQId   CmdId  Status  PELoc          LBA  NSID    VS
  0         22     0  0x8008  0x4004      -            0     1     -
  1         21     0  0x300a  0x4004      -            0     0     -
  2         20     0  0x300f  0x4004      -            0     1     -
  3         19     0  0x0008  0x4004      -            0     0     -
  4         18     0  0x0012  0x4004      -            0     1     -
  5         17     0  0x300e  0x4004      -            0     0     -
  6         16     0  0xd00b  0x4004      -            0     1     -
  7         15     0  0x1013  0x4004      -            0     1     -
  8         14     0  0xd010  0x4004      -            0     0     -
  9         13     0  0x1011  0x4004      -            0     0     -
 10         12     0  0xe013  0x4004      -            0     0     -
 11         11     0  0x5010  0x4004      -            0     0     -
 12         10     0  0x3012  0x4004      -            0     0     -
 13          9     0  0xb00b  0x4004      -            0     0     -
 14          8     0  0x0008  0x4004      -            0     0     -
 15          7     0  0xb017  0x4004      -            0     0     -
... (48 entries not read)

Code: Alles auswählen

root@openmediavault:~# uname -ar
Linux openmediavault 6.1.0-28-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.119-1 (2024-11-22) x86_64 GNU/Linux
Das ganze ist die Systemplatte, Daten liegend dort nicht

Michael

Benutzeravatar
whisper
Beiträge: 3373
Registriert: 23.09.2002 14:32:21
Lizenz eigener Beiträge: GNU Free Documentation License
Kontaktdaten:

Re: smartd: number of Error Log entries increased from 19 to 21

Beitrag von whisper » 01.12.2024 11:36:42

Mir kommt
Data Units Read: 4.675.284 [2,39 TB]
Data Units Written: 16.702.873 [8,55 TB]
seltsam vor. Mehr Write als read bei einer Systemplatte.
Aber davon ab, noch ist ja reserve bei denSpare

Code: Alles auswählen

Available Spare:                    100%
Available Spare Threshold:          10%
Percentage Used:                    13%
Besorg dir ne neue Platte, hat aber noch Zeit.
Wenn die "Percentage Used:" über 50% ist, würde ich eine neue einbauen
Alter ist übrigens keine Ausrede, nur Erfahrung, die sich stapelt. 😉

Antworten