Fritz!Box 7330 via fstab mit Kernel 4.13 mounten (cifs)

[geier22]

Ich meine seit dem Update auf Kernel 4.13 bekomme ich das Mounten meines Fritz!Box- NAS nicht mehr hin.
Leider kann ich es nicht genau zeitlich bestimmen, da ich das NAS selten benutze und meist den Mount- Befehl in der fstab für die Fritz!BOX auskommentiert habe.
Über die Dateimanager lässt sich das NAS problemlos mouten als
smb://192.168.0.1/fritz.nas/
Meine ursprüngliche Zeile in der fstab sah so aus:

Code: Alles auswählen

Fritzbox //192.168.0.1/fritz.nas/TOSHIBA-TransMemory-Mx-01/ /media/fritzbox cifs credentials=/etc/samba/auth,noauto,x-systemd.automount,defaults   0    0

das gibt jetzt folgendes Ergebnis (ich lass auch das unwesentliche mal drin):

Code: Alles auswählen

journalctl -b-1 |grep mount
Nov 01 16:56:50 sparkyxfce kernel: EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
Nov 01 16:56:50 sparkyxfce systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
Nov 01 16:56:50 sparkyxfce systemd[1]: Set up automount media-fritzbox.automount.
Nov 01 16:56:50 sparkyxfce kernel: EXT4-fs (sdc1): re-mounted. Opts: discard
Nov 01 16:56:50 sparkyxfce systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
Nov 01 16:56:50 sparkyxfce kernel: EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
Nov 01 16:56:50 sparkyxfce kernel: EXT4-fs (sdc5): mounted filesystem with ordered data mode. Opts: discard
Nov 01 16:56:50 sparkyxfce kernel: EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
Nov 01 16:56:50 sparkyxfce systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 681 (update-binfmts)
Nov 01 16:56:55 sparkyxfce systemd[1]: media-fritzbox.automount: Got automount request for /media/fritzbox, triggered by 1154 (pool)
Nov 01 16:56:57 sparkyxfce systemd[1]: media-Musik.automount: Got automount request for /media/Musik, triggered by 1283 (conky)
Nov 01 16:56:57 sparkyxfce kernel: EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: (null)
Nov 01 16:56:58 sparkyxfce kernel: No dialect specified on mount. Default has changed to a more secure dialect, SMB3 (vers=3.0), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3 specify vers=1.0 on mount. For somewhat newer servers such as Windows 7 try vers=2.1.
Nov 01 16:56:59 sparkyxfce systemd[1]: media-fritzbox.mount: Mount process exited, code=exited status=32
Nov 01 16:56:59 sparkyxfce systemd[1]: media-fritzbox.mount: Failed with result 'exit-code'.

Ich hab dann die Empfehlung mit den Versionsnummern befolgt ( vers=1.0 funktionierte nicht)

Code: Alles auswählen

#Fritzbox
//192.168.0.1/fritz.nas/TOSHIBA-TransMemory-Mx-01/ /media/fritzbox cifs credentials=/etc/samba/auth,noauto,x-systemd.automount,defaults,vers=2.1   0    0

Code: Alles auswählen

journalctl -b |grep mount
Nov 01 17:41:17 sparkyxfce kernel: EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
Nov 01 17:41:17 sparkyxfce kernel: EXT4-fs (sdc1): re-mounted. Opts: discard
Nov 01 17:41:18 sparkyxfce systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
Nov 01 17:41:18 sparkyxfce kernel: EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
Nov 01 17:41:18 sparkyxfce kernel: EXT4-fs (sdc5): mounted filesystem with ordered data mode. Opts: discard
Nov 01 17:41:18 sparkyxfce kernel: EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
Nov 01 17:41:18 sparkyxfce systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 649 (update-binfmts)
Nov 01 17:41:28 sparkyxfce kernel: CIFS VFS: cifs_mount failed w/return code = -112
Nov 01 17:41:28 sparkyxfce systemd[1]: media-fritzbox.mount: Mount process exited, code=exited status=32
Nov 01 17:41:28 sparkyxfce systemd[1]: media-fritzbox.mount: Failed with result 'exit-code'.
Nov 01 17:41:28 sparkyxfce systemd[1]: Failed to mount /media/fritzbox.
Nov 01 17:41:34 sparkyxfce systemd[1]: media-Musik.automount: Got automount request for /media/Musik, triggered by 1563 (conky)
Nov 01 17:41:34 sparkyxfce kernel: EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: (null)

Hab ich da einen Syntax Fehler drin oder wo ist der Hund begraben ? Die Fritz!Box 7330 ist halt ein etwas älteres Modell.

[dufty2]

Wenn Du über den Dateimanager mounten lässt, wie schaut denn dann der Mount aus:
# mount | grep media
?

Ein manuelles Mounten via
# mount /media/fritzbox
funktioniert?

Mmmh, vielleicht stand um "Nov 01 17:41:28" das Netzwerk noch nicht zur Verfügung?

[geier22]

Bin jetzt nicht am Rechner, aber wenn ich die Fritz!Box über den Dateimanager einhänge, wird
sie nach /run/user/1000/gvfs/ gemountet, und erscheint dann als
smb://192.168.0.1/fritz.nas/ im Dateimanager.
Das Mounten im Dateimanager geschieht ja über das Dialogfenster. Da geht es dann: Server (IP) -- Windowsfreigabe usw....

Die ursprüngliche Zeile in der fstab hat ja ewig funktioniert. Habe es bloß nicht immer benutzt, weil ich den Stick an der Fritz!Box sehr selten brauche.

[geier22]

Nur der Vollständigkeit halber: Der Versuch, das Fritz Nas über die Konsole zu mouten:

Code: Alles auswählen

# mount //192.168.0.1/fritz.nas/TOSHIBA-TransMemory-Mx-01/ /media/fritzbox 
Password for root@//192.168.0.1/fritz.nas/TOSHIBA-TransMemory-Mx-01/:  *******************
mount error(112): Host is down
Refer to the mount.cifs(8) manual page (e.g. man mount.cifs)

andre Varianten: bei der Passwortabfrage, ist es egal ob ich das PW für die Fritz!Box oder für das NAS eingebe.

Code: Alles auswählen

# mount //192.168.0.1/fritz.nas/TOSHIBA-TransMemory-Mx-01/ credentials=/etc/samba/auth
Couldn't chdir to credentials=/etc/samba/auth: No such file or directory

Code: Alles auswählen

# mount.cifs //192.168.0.1/fritz.nas/TOSHIBA-TransMemory-Mx-01/ credentials=/etc/samba/auth
Couldn't chdir to credentials=/etc/samba/auth: No such file or directory

Code: Alles auswählen

# mount.cifs //192.168.0.1/fritz.nas/TOSHIBA-TransMemory-Mx-01/ credentials=/home/hans/.smbcredentials
Couldn't chdir to credentials=/home/hans/.smbcredentials: No such file or directory

oder

Code: Alles auswählen

# mount.cifs //192.168.0.1/fritz.nas/TOSHIBA-TransMemory-Mx-01/ /media/fritzbox credentials=/home/hans/.smbcredentials
Password for root@//192.168.0.1/fritz.nas/TOSHIBA-TransMemory-Mx-01/:  ***
mount error(112): Host is down
Refer to the mount.cifs(8) manual page (e.g. man mount.cifs)

[geier22]

Ich habe jetzt noch ein paar logs zusammengetragen, in der Hoffnung, dass irgendjemand ein Licht aufgeht
Die zugehörige Zeile in der fstab für das Fritz Nas: ich habe die Position dieser Versions- Nr. wider hinten hingetan, da dies wohl die einzige Stelle ist, an der nicht gemeckert wird.
Auf diese Zeile beziehen sich alle nachfolgenden Protokollmeldungen:

Code: Alles auswählen

#Fritzbox
//192.168.0.1/fritz.nas/TOSHIBA-TransMemory-Mx-01/  /media/fritzbox  cifs credentials=/etc/samba/auth,noauto,x-systemd.automount,uid=1000,gid=1001,vers=2.1   0    0

dmesg:

Code: Alles auswählen

    6.273567] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    8.241485] fuse init (API version 7.26)
[   10.211886] EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: (null)
[   12.239639] FS-Cache: Loaded
[   12.240042] Key type dns_resolver registered
[   12.245890] FS-Cache: Netfs 'cifs' registered for caching
[   12.245926] Key type cifs.spnego registered
[   12.245929] Key type cifs.idmap registered
[   13.055283] CIFS VFS: cifs_mount failed w/return code = -112
[   13.289410] CIFS VFS: cifs_mount failed w/return code = -112
[   13.521847] CIFS VFS: cifs_mount failed w/return code = -112
[   13.755659] CIFS VFS: cifs_mount failed w/return code = -112
[   14.012197] CIFS VFS: cifs_mount failed w/return code = -112
 

aus syslog:

Code: Alles auswählen

Nov  9 00:37:27 sparkyxfce systemd[1]: Reached target Graphical Interface.
Nov  9 00:37:27 sparkyxfce systemd[1]: Starting Update UTMP about System Runlevel Changes...
Nov  9 00:37:27 sparkyxfce systemd[1]: Started Update UTMP about System Runlevel Changes.
Nov  9 00:37:27 sparkyxfce kernel: [   13.055283] CIFS VFS: cifs_mount failed w/return code = -112
Nov  9 00:37:27 sparkyxfce systemd[1]: media-fritzbox.mount: Mount process exited, code=exited status=32
Nov  9 00:37:27 sparkyxfce systemd[1]: media-fritzbox.mount: Failed with result 'exit-code'.
Nov  9 00:37:27 sparkyxfce systemd[1]: Failed to mount /media/fritzbox.
Nov  9 00:37:27 sparkyxfce systemd[1]: Startup finished in 3.441s (kernel) + 9.615s (userspace) = 13.057s.
Nov  9 00:37:27 sparkyxfce systemd[1]: media-fritzbox.automount: Got automount request for /media/fritzbox, triggered by 1091 (gvfs-udisks2-vo)
Nov  9 00:37:27 sparkyxfce systemd[1]: Mounting /media/fritzbox...
Nov  9 00:37:27 sparkyxfce ntpd[783]: Listen normally on 6 eth0 192.168.0.40:123

aus boot.log:

Code: Alles auswählen

Starting /etc/rc.local Compatibility...
         Mounting /media/fritzbox...
         Starting keep memory of all UPnP devices that announced themselves...
[[0;32m  OK  [0m] Started /etc/rc.local Compatibility.
[[0;32m  OK  [0m] Started keep memory of all UPnP devices that announced themselves.
[[0;1;31mFAILED[0m] Failed to mount /media/fritzbox.
See 'systemctl status media-fritzbox.mount' for details.
[[0;1;33mDEPEND[0m] Dependency failed for Remote File Systems.
         Starting LSB: disk temperature monitoring daemon...
         Starting LSB: Mono XSP4...
         Starting LSB: exim Mail Transport Agent...
         Starting Permit User Sessions...
         Starting LSB: Brings up/down network automatically...
         Starting LSB: Start some power management scripts...

Code: Alles auswählen

$ systemctl status media-fritzbox.mount
● media-fritzbox.mount - /media/fritzbox
   Loaded: loaded (/etc/fstab; generated; vendor preset: enabled)
   Active: failed (Result: exit-code) since Thu 2017-11-09 00:37:28 CET; 1h 44min ago
    Where: /media/fritzbox
     What: //192.168.0.1/fritz.nas/TOSHIBA-TransMemory-Mx-01/
     Docs: man:fstab(5)
           man:systemd-fstab-generator(8)
  Process: 1652 ExecMount=/bin/mount //192.168.0.1/fritz.nas/TOSHIBA-TransMemory-Mx-01/ /media/fritzbox -t cifs -o credentials=/etc/samba/auth,x-systemd.automount,uid=1000,gid=1001,vers=2.1 (code=exited, status=32)

Nov 09 00:37:28 sparkyxfce systemd[1]: Mounting /media/fritzbox...
Nov 09 00:37:28 sparkyxfce systemd[1]: media-fritzbox.mount: Mount process exited, code=exited status=32
Nov 09 00:37:28 sparkyxfce systemd[1]: media-fritzbox.mount: Failed with result 'exit-code'.
Nov 09 00:37:28 sparkyxfce systemd[1]: Failed to mount /media/fritzbox.
Nov 09 00:37:28 sparkyxfce systemd[1]: media-fritzbox.mount: Start request repeated too quickly.
Nov 09 00:37:28 sparkyxfce systemd[1]: media-fritzbox.mount: Failed with result 'exit-code'.
Nov 09 00:37:28 sparkyxfce systemd[1]: Failed to mount /media/fritzbox.
hans@sparkyxfce:~$ 

Und zu guter Letzt noch journalctl:

Code: Alles auswählen

$ journalctl --since="2017-11-09 00:37:27" --until="2017-11-09 00:37:29"
-- Logs begin at Fri 2017-10-20 00:59:52 CEST, end at Thu 2017-11-09 03:02:43 CET. --
Nov 09 00:37:27 sparkyxfce exim4[1362]: Starting MTA: exim4.
Nov 09 00:37:27 sparkyxfce systemd[1]: Started LSB: exim Mail Transport Agent.
Nov 09 00:37:27 sparkyxfce systemd[1]: Reached target Multi-User System.
Nov 09 00:37:27 sparkyxfce systemd[1]: Reached target Graphical Interface.
Nov 09 00:37:27 sparkyxfce systemd[1]: Starting Update UTMP about System Runlevel Changes...
Nov 09 00:37:27 sparkyxfce systemd[1]: Started Update UTMP about System Runlevel Changes.
Nov 09 00:37:27 sparkyxfce kernel: CIFS VFS: cifs_mount failed w/return code = -112
Nov 09 00:37:27 sparkyxfce systemd[1]: media-fritzbox.mount: Mount process exited, code=exited status=32
Nov 09 00:37:27 sparkyxfce systemd[1]: media-fritzbox.mount: Failed with result 'exit-code'.
Nov 09 00:37:27 sparkyxfce systemd[1]: Failed to mount /media/fritzbox.
Nov 09 00:37:27 sparkyxfce systemd[1]: Startup finished in 3.441s (kernel) + 9.615s (userspace) = 13.057s.
Nov 09 00:37:27 sparkyxfce systemd[1]: media-fritzbox.automount: Got automount request for /media/fritzbox, triggered by 1091 (gvfs-udisk
Nov 09 00:37:27 sparkyxfce systemd[1]: Mounting /media/fritzbox...
Nov 09 00:37:27 sparkyxfce ntpd[783]: Listen normally on 6 eth0 192.168.0.40:123
Nov 09 00:37:27 sparkyxfce ntpd[783]: new interface(s) found: waking up resolver
Nov 09 00:37:27 sparkyxfce systemd[1]: media-fritzbox.mount: Mount process exited, code=exited status=32
Nov 09 00:37:27 sparkyxfce systemd[1]: media-fritzbox.mount: Failed with result 'exit-code'.
Nov 09 00:37:27 sparkyxfce systemd[1]: Failed to mount /media/fritzbox.
Nov 09 00:37:27 sparkyxfce systemd[1]: media-fritzbox.automount: Got automount request for /media/fritzbox, triggered by 1091