Danke für die Antworten!
@Apfelmann:
freecad 0.15 verwende ich eh schon. Aber ich versuche zu testen, ob manche Bugs in 0.16 vielleicht nicht mehr auftreten...
Eine virtuelle Maschine wäre schon eine Möglichkeit, eigentlich... Ich habs bisher noch nicht gemacht weil ich noch keine gebraucht habe... Vielleicht wäre das eh so wie chroot als Convenience-Lösung? Gibt's nennenswerte Unterschiede? (Außer dass die virtuelle Maschine eine grafische Oberfläche hat)
@rendegast
Danke für den Hinweis.
checkinstall hab ich vorher eh schon probiert... nun nochmal. Ich hab kein so elegantes Script, aber mir scheint, das Ergebnis von checkinstall ist kein schlechtes:
39056
Dieses Paket habe ich dann auf der Host-Maschine installiert und versucht zu starten:
Code: Alles auswählen
$ sudo dpkg -i free-cad_0.16b-1_amd64.deb
[sudo] Passwort für <user>:
Vormals nicht ausgewähltes Paket free-cad wird gewählt.
(Lese Datenbank ... 200046 Dateien und Verzeichnisse sind derzeit installiert.)
Vorbereitung zum Entpacken von free-cad_0.16b-1_amd64.deb ...
Entpacken von free-cad (0.16b-1) ...
free-cad (0.16b-1) wird eingerichtet ...
$ free # <TAB gedrückt>
free freecad freecadcmd
$ freecad
FreeCAD 0.15, Libs: 0.15R4671 (Git)
© Juergen Riegel, Werner Mayer, Yorik van Havre 2001-2015
##### #### ### ####
# # # # # #
# ## #### #### # # # # #
#### # # # # # # # ##### # #
# # #### #### # # # # #
# # # # # # # # # ## ## ##
# # #### #### ### # # #### ## ## ##
Gtk-Message: Failed to load module "canberra-gtk-module"
Wie man sieht, gibt es kein anderes Programm im Pfad als freecad. Wenn ich das ausführe, startet aber wieder FreeCAD 0.15, das ich aus den Debian-Paketquellen habe...
Irgendwas mach ich also scheinbar noch falsch.
wo kann ich denn die make-Skript-Optionen sehen?
Gefunden hab ich das hier:
Code: Alles auswählen
# cmake -help
Usage
cmake [options] <path-to-source>
cmake [options] <path-to-existing-build>
Specify a source directory to (re-)generate a build system for it in the
current working directory. Specify an existing build directory to
re-generate its build system.
Options
-C <initial-cache> = Pre-load a script to populate the cache.
-D <var>[:<type>]=<value> = Create a cmake cache entry.
-U <globbing_expr> = Remove matching entries from CMake cache.
-G <generator-name> = Specify a build system generator.
-T <toolset-name> = Specify toolset name if supported by
generator.
-A <platform-name> = Specify platform name if supported by
generator.
-Wno-dev = Suppress developer warnings.
-Wdev = Enable developer warnings.
-E = CMake command mode.
-L[A][H] = List non-advanced cached variables.
--build <dir> = Build a CMake-generated project binary tree.
-N = View mode only.
-P <file> = Process script mode.
--find-package = Run in pkg-config like mode.
--graphviz=[file] = Generate graphviz of dependencies, see
CMakeGraphVizOptions.cmake for more.
--system-information [file] = Dump information about this system.
--debug-trycompile = Do not delete the try_compile build tree.
Only useful on one try_compile at a time.
--debug-output = Put cmake in a debug mode.
--trace = Put cmake in trace mode.
--trace-expand = Put cmake in trace mode with variable
expansion.
--warn-uninitialized = Warn about uninitialized values.
--warn-unused-vars = Warn about unused variables.
--no-warn-unused-cli = Don't warn about command line options.
--check-system-vars = Find problems with variable usage in system
files.
--help,-help,-usage,-h,-H,/? = Print usage information and exit.
--version,-version,/V [<f>] = Print version number and exit.
--help-full [<f>] = Print all help manuals and exit.
--help-manual <man> [<f>] = Print one help manual and exit.
--help-manual-list [<f>] = List help manuals available and exit.
--help-command <cmd> [<f>] = Print help for one command and exit.
--help-command-list [<f>] = List commands with help available and exit.
--help-commands [<f>] = Print cmake-commands manual and exit.
--help-module <mod> [<f>] = Print help for one module and exit.
--help-module-list [<f>] = List modules with help available and exit.
--help-modules [<f>] = Print cmake-modules manual and exit.
--help-policy <cmp> [<f>] = Print help for one policy and exit.
--help-policy-list [<f>] = List policies with help available and exit.
--help-policies [<f>] = Print cmake-policies manual and exit.
--help-property <prop> [<f>] = Print help for one property and exit.
--help-property-list [<f>] = List properties with help available and
exit.
--help-properties [<f>] = Print cmake-properties manual and exit.
--help-variable var [<f>] = Print help for one variable and exit.
--help-variable-list [<f>] = List variables with help available and exit.
--help-variables [<f>] = Print cmake-variables manual and exit.
Generators
The following generators are available on this platform:
Unix Makefiles = Generates standard UNIX makefiles.
Ninja = Generates build.ninja files.
Watcom WMake = Generates Watcom WMake makefiles.
CodeBlocks - Ninja = Generates CodeBlocks project files.
CodeBlocks - Unix Makefiles = Generates CodeBlocks project files.
CodeLite - Ninja = Generates CodeLite project files.
CodeLite - Unix Makefiles = Generates CodeLite project files.
Eclipse CDT4 - Ninja = Generates Eclipse CDT 4.0 project files.
Eclipse CDT4 - Unix Makefiles= Generates Eclipse CDT 4.0 project files.
KDevelop3 = Generates KDevelop 3 project files.
KDevelop3 - Unix Makefiles = Generates KDevelop 3 project files.
Kate - Ninja = Generates Kate project files.
Kate - Unix Makefiles = Generates Kate project files.
Sublime Text 2 - Ninja = Generates Sublime Text 2 project files.
Sublime Text 2 - Unix Makefiles
= Generates Sublime Text 2 project files.
# make --help
Usage: make [options] [target] ...
Options:
-b, -m Ignored for compatibility.
-B, --always-make Unconditionally make all targets.
-C DIRECTORY, --directory=DIRECTORY
Change to DIRECTORY before doing anything.
-d Print lots of debugging information.
--debug[=FLAGS] Print various types of debugging information.
-e, --environment-overrides
Environment variables override makefiles.
--eval=STRING Evaluate STRING as a makefile statement.
-f FILE, --file=FILE, --makefile=FILE
Read FILE as a makefile.
-h, --help Print this message and exit.
-i, --ignore-errors Ignore errors from recipes.
-I DIRECTORY, --include-dir=DIRECTORY
Search DIRECTORY for included makefiles.
-j [N], --jobs[=N] Allow N jobs at once; infinite jobs with no arg.
-k, --keep-going Keep going when some targets can't be made.
-l [N], --load-average[=N], --max-load[=N]
Don't start multiple jobs unless load is below N.
-L, --check-symlink-times Use the latest mtime between symlinks and target.
-n, --just-print, --dry-run, --recon
Don't actually run any recipe; just print them.
-o FILE, --old-file=FILE, --assume-old=FILE
Consider FILE to be very old and don't remake it.
-O[TYPE], --output-sync[=TYPE]
Synchronize output of parallel jobs by TYPE.
-p, --print-data-base Print make's internal database.
-q, --question Run no recipe; exit status says if up to date.
-r, --no-builtin-rules Disable the built-in implicit rules.
-R, --no-builtin-variables Disable the built-in variable settings.
-s, --silent, --quiet Don't echo recipes.
-S, --no-keep-going, --stop
Turns off -k.
-t, --touch Touch targets instead of remaking them.
--trace Print tracing information.
-v, --version Print the version number of make and exit.
-w, --print-directory Print the current directory.
--no-print-directory Turn off -w, even if it was turned on implicitly.
-W FILE, --what-if=FILE, --new-file=FILE, --assume-new=FILE
Consider FILE to be infinitely new.
--warn-undefined-variables Warn when an undefined variable is referenced.
This program built for x86_64-pc-linux-gnu
Report bugs to <bug-make@gnu.org>
