Stromfressende Module

Welches Modul/Treiber für welche Hardware, Kernel compilieren...
Antworten
Benutzeravatar
weedy
Beiträge: 585
Registriert: 02.11.2002 21:47:49
Lizenz eigener Beiträge: GNU General Public License
Kontaktdaten:

Stromfressende Module

Beitrag von weedy » 09.08.2014 12:04:04

Hallo,

ich hatte kürzlich den 3.14.11 - Kernel für meinen Laptop gebaut und musste
feststellen, dass der Lüfter öfter als zuvor hochdrehte und 'acpi -t' lieferte
sogar zeitweilig CPU- Temperaturen bis 96 Grad.

Jetzt hatte ich ein paar module rausgeworfen und siehe da, der Lüfter
läuft wieder, wie normal. Das .config - diff siehe unten.

Ich hatte wohl zufällig ein Modul entfernt bzw. eine Option abgeschaltet.
die für die stärkere CPU-Belastung zuständig war.

Doch nun zur eigentlichen Frage. Gibt es ein Werkzeug, welches mir zeigen
kann, welche Module / Kernel-Optionen eine höhere CPU Last erzeugen?

Gibt es überhaupt ein Werkzeug, welches eine derartige Belastung auch bei
Desktoprechnern anzeigen kann? Denn dort hätte ich es definitiv nicht
mitbekommen, da der Lüfter dort eher nicht zu hören ist.

Alleine das 'top' tool konnte mir dewn Ressourcenfresser jedenfalls nicht identifizieren.

Gruß
weedy.

Code: Alles auswählen

-------------------------- src/linux-3.14.11/.config --------------------------
index 83d49f5..6f1784e 100644
@@ -106,7 +106,8 @@ CONFIG_HIGH_RES_TIMERS=y
 #
 # CONFIG_TICK_CPU_ACCOUNTING is not set
 CONFIG_IRQ_TIME_ACCOUNTING=y
-# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_TASKSTATS=y
 CONFIG_TASK_DELAY_ACCT=y
 CONFIG_TASK_XACCT=y
@@ -127,7 +128,7 @@ CONFIG_RCU_FANOUT_LEAF=16
 # CONFIG_RCU_NOCB_CPU is not set
 CONFIG_IKCONFIG=y
 # CONFIG_IKCONFIG_PROC is not set
-CONFIG_LOG_BUF_SHIFT=14
+CONFIG_LOG_BUF_SHIFT=21
 CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
 CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
 CONFIG_ARCH_WANTS_PROT_NUMA_PROT_NONE=y
@@ -224,6 +225,7 @@ CONFIG_HAVE_OPTPROBES=y
 CONFIG_HAVE_KPROBES_ON_FTRACE=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
 CONFIG_GENERIC_SMP_IDLE_THREAD=y
 CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
 CONFIG_HAVE_DMA_API_DEBUG=y
@@ -336,24 +338,10 @@ CONFIG_X86_MPPARSE=y
 # CONFIG_X86_BIGSMP is not set
 # CONFIG_X86_EXTENDED_PLATFORM is not set
 # CONFIG_X86_INTEL_LPSS is not set
+CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
 # CONFIG_X86_32_IRIS is not set
 CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_HYPERVISOR_GUEST=y
-CONFIG_PARAVIRT=y
-CONFIG_PARAVIRT_DEBUG=y
-# CONFIG_PARAVIRT_SPINLOCKS is not set
-CONFIG_XEN=y
-CONFIG_XEN_DOM0=y
-CONFIG_XEN_PRIVILEGED_GUEST=y
-CONFIG_XEN_PVHVM=y
-CONFIG_XEN_MAX_DOMAIN_MEMORY=64
-CONFIG_XEN_SAVE_RESTORE=y
-# CONFIG_XEN_DEBUG_FS is not set
-CONFIG_KVM_GUEST=y
-CONFIG_KVM_DEBUG_FS=y
-CONFIG_LGUEST_GUEST=y
-# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
-CONFIG_PARAVIRT_CLOCK=y
+# CONFIG_HYPERVISOR_GUEST is not set
 CONFIG_NO_BOOTMEM=y
 CONFIG_MEMTEST=y
 # CONFIG_M486 is not set
@@ -380,29 +368,26 @@ CONFIG_MK7=y
 # CONFIG_MVIAC7 is not set
 # CONFIG_MCORE2 is not set
 # CONFIG_MATOM is not set
-CONFIG_X86_GENERIC=y
+# CONFIG_X86_GENERIC is not set
 CONFIG_X86_INTERNODE_CACHE_SHIFT=6
 CONFIG_X86_L1_CACHE_SHIFT=6
 CONFIG_X86_INTEL_USERCOPY=y
 CONFIG_X86_USE_PPRO_CHECKSUM=y
 CONFIG_X86_USE_3DNOW=y
 CONFIG_X86_TSC=y
-CONFIG_X86_CMPXCHG64=y
 CONFIG_X86_CMOV=y
-CONFIG_X86_MINIMUM_CPU_FAMILY=5
+CONFIG_X86_MINIMUM_CPU_FAMILY=4
 CONFIG_X86_DEBUGCTLMSR=y
 CONFIG_PROCESSOR_SELECT=y
-CONFIG_CPU_SUP_INTEL=y
-CONFIG_CPU_SUP_CYRIX_32=y
+# CONFIG_CPU_SUP_INTEL is not set
+# CONFIG_CPU_SUP_CYRIX_32 is not set
 CONFIG_CPU_SUP_AMD=y
-CONFIG_CPU_SUP_CENTAUR=y
-CONFIG_CPU_SUP_TRANSMETA_32=y
-CONFIG_CPU_SUP_UMC_32=y
+# CONFIG_CPU_SUP_CENTAUR is not set
+# CONFIG_CPU_SUP_TRANSMETA_32 is not set
+# CONFIG_CPU_SUP_UMC_32 is not set
 CONFIG_HPET_TIMER=y
 CONFIG_HPET_EMULATE_RTC=y
 CONFIG_DMI=y
-CONFIG_SWIOTLB=y
-CONFIG_IOMMU_HELPER=y
 CONFIG_NR_CPUS=8
 # CONFIG_SCHED_SMT is not set
 # CONFIG_SCHED_MC is not set
@@ -413,7 +398,13 @@ CONFIG_PREEMPT_COUNT=y
 CONFIG_X86_LOCAL_APIC=y
 CONFIG_X86_IO_APIC=y
 CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
-# CONFIG_X86_MCE is not set
+CONFIG_X86_MCE=y
+CONFIG_X86_MCE_INTEL=y
+CONFIG_X86_MCE_AMD=y
+# CONFIG_X86_ANCIENT_MCE is not set
+CONFIG_X86_MCE_THRESHOLD=y
+# CONFIG_X86_MCE_INJECT is not set
+CONFIG_X86_THERMAL_VECTOR=y
 CONFIG_VM86=y
 # CONFIG_TOSHIBA is not set
 # CONFIG_I8K is not set
@@ -428,16 +419,15 @@ CONFIG_MICROCODE_EARLY=y
 CONFIG_X86_MSR=y
 CONFIG_X86_CPUID=y
 # CONFIG_NOHIGHMEM is not set
-# CONFIG_HIGHMEM4G is not set
-CONFIG_HIGHMEM64G=y
+CONFIG_HIGHMEM4G=y
+# CONFIG_HIGHMEM64G is not set
 CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_3G_OPT is not set
 # CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_2G_OPT is not set
 # CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_HIGHMEM=y
-CONFIG_X86_PAE=y
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
@@ -454,9 +444,8 @@ CONFIG_ARCH_DISCARD_MEMBLOCK=y
 # CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
 # CONFIG_COMPACTION is not set
-CONFIG_PHYS_ADDR_T_64BIT=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_NEED_BOUNCE_POOL=y
@@ -464,6 +453,8 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_MMU_NOTIFIER=y
 CONFIG_KSM=y
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
+# CONFIG_MEMORY_FAILURE is not set
 # CONFIG_TRANSPARENT_HUGEPAGE is not set
 CONFIG_CROSS_MEMORY_ATTACH=y
 # CONFIG_CLEANCACHE is not set
@@ -485,8 +476,7 @@ CONFIG_X86_PAT=y
 CONFIG_ARCH_USES_PG_UNCACHED=y
 CONFIG_ARCH_RANDOM=y
 CONFIG_X86_SMAP=y
-CONFIG_EFI=y
-# CONFIG_EFI_STUB is not set
+# CONFIG_EFI is not set
 CONFIG_SECCOMP=y
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_250 is not set
@@ -496,7 +486,6 @@ CONFIG_HZ=300
 CONFIG_SCHED_HRTICK=y
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
-CONFIG_KEXEC_JUMP=y
 CONFIG_PHYSICAL_START=0x100000
 # CONFIG_RELOCATABLE is not set
 CONFIG_PHYSICAL_ALIGN=0x100000
@@ -510,21 +499,14 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 #
 # Power management and ACPI options
 #
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_HIBERNATE_CALLBACKS=y
-CONFIG_HIBERNATION=y
-CONFIG_PM_STD_PARTITION=""
-CONFIG_PM_SLEEP=y
-CONFIG_PM_SLEEP_SMP=y
-# CONFIG_PM_AUTOSLEEP is not set
-# CONFIG_PM_WAKELOCKS is not set
+# CONFIG_SUSPEND is not set
+# CONFIG_HIBERNATION is not set
 CONFIG_PM_RUNTIME=y
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
+CONFIG_PM_DEBUG=y
+CONFIG_PM_ADVANCED_DEBUG=y
 # CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
 CONFIG_ACPI=y
-CONFIG_ACPI_SLEEP=y
 CONFIG_ACPI_PROCFS=y
 CONFIG_ACPI_PROCFS_POWER=y
 # CONFIG_ACPI_EC_DEBUGFS is not set
@@ -548,16 +530,9 @@ CONFIG_ACPI_CONTAINER=y
 # CONFIG_ACPI_SBS is not set
 # CONFIG_ACPI_HED is not set
 CONFIG_ACPI_CUSTOM_METHOD=m
-CONFIG_ACPI_BGRT=y
 # CONFIG_ACPI_APEI is not set
+# CONFIG_ACPI_EXTLOG is not set
 CONFIG_SFI=y
-CONFIG_X86_APM_BOOT=y
-CONFIG_APM=y
-# CONFIG_APM_IGNORE_USER_SUSPEND is not set
-# CONFIG_APM_DO_ENABLE is not set
-CONFIG_APM_CPU_IDLE=y
-# CONFIG_APM_DISPLAY_BLANK is not set
-# CONFIG_APM_ALLOW_INTS is not set
 
 #
 # CPU Frequency scaling
@@ -565,7 +540,7 @@ CONFIG_APM_CPU_IDLE=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_GOV_COMMON=y
 CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_STAT_DETAILS=y
 # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
@@ -610,11 +585,10 @@ CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
 # CPU Idle
 #
 CONFIG_CPU_IDLE=y
-# CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set
+CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
 CONFIG_CPU_IDLE_GOV_LADDER=y
 CONFIG_CPU_IDLE_GOV_MENU=y
 # CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
-# CONFIG_INTEL_IDLE is not set
 
 #
 # Bus options (PCI etc.)
@@ -627,7 +601,6 @@ CONFIG_PCI_GOANY=y
 CONFIG_PCI_BIOS=y
 CONFIG_PCI_DIRECT=y
 CONFIG_PCI_MMCONFIG=y
-CONFIG_PCI_XEN=y
 CONFIG_PCI_DOMAINS=y
 # CONFIG_PCI_CNB20LE_QUIRK is not set
 CONFIG_PCIEPORTBUS=y
@@ -643,7 +616,6 @@ CONFIG_PCI_MSI=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
 CONFIG_PCI_STUB=m
-CONFIG_XEN_PCIDEV_FRONTEND=y
 CONFIG_HT_IRQ=y
 CONFIG_PCI_ATS=y
 CONFIG_PCI_IOV=y
@@ -664,6 +636,7 @@ CONFIG_EISA_VIRTUAL_ROOT=y
 CONFIG_EISA_NAMES=y
 CONFIG_SCx200=y
 CONFIG_SCx200HR_TIMER=y
+# CONFIG_OLPC is not set
 # CONFIG_ALIX is not set
 # CONFIG_NET5501 is not set
 # CONFIG_GEOS is not set
@@ -1456,7 +1429,7 @@ CONFIG_EXTRA_FIRMWARE=""
 CONFIG_FW_LOADER_USER_HELPER=y
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
-CONFIG_SYS_HYPERVISOR=y
+# CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_GENERIC_CPU_DEVICES is not set
 CONFIG_REGMAP=y
 CONFIG_REGMAP_I2C=m
@@ -1669,8 +1642,6 @@ CONFIG_CDROM_PKTCDVD=y
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
-CONFIG_XEN_BLKDEV_FRONTEND=y
-# CONFIG_XEN_BLKDEV_BACKEND is not set
 CONFIG_VIRTIO_BLK=m
 # CONFIG_BLK_DEV_HD is not set
 # CONFIG_BLK_DEV_RBD is not set
@@ -1701,7 +1672,6 @@ CONFIG_SENSORS_TSL2550=m
 # CONFIG_SENSORS_APDS990X is not set
 # CONFIG_HMC6352 is not set
 CONFIG_DS1682=m
-# CONFIG_VMWARE_BALLOON is not set
 # CONFIG_BMP085_I2C is not set
 # CONFIG_PCH_PHUB is not set
 # CONFIG_USB_SWITCH_FSA9480 is not set
@@ -1920,7 +1890,6 @@ CONFIG_SCSI_HPTIOP=m
 CONFIG_SCSI_BUSLOGIC=m
 # CONFIG_SCSI_FLASHPOINT is not set
 # CONFIG_VMWARE_PVSCSI is not set
-CONFIG_HYPERV_STORAGE=m
 CONFIG_LIBFC=m
 CONFIG_LIBFCOE=m
 CONFIG_FCOE=m
@@ -2140,7 +2109,6 @@ CONFIG_FUSION_LAN=m
 CONFIG_I2O=m
 CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
 CONFIG_I2O_EXT_ADAPTEC=y
-CONFIG_I2O_EXT_ADAPTEC_DMA64=y
 CONFIG_I2O_CONFIG=m
 CONFIG_I2O_CONFIG_OLD_IOCTL=y
 CONFIG_I2O_BUS=m
@@ -2217,7 +2185,9 @@ CONFIG_ATM_SOLOS=m
 #
 # CAIF transport drivers
 #
-# CONFIG_VHOST_NET is not set
+CONFIG_VHOST_NET=m
+CONFIG_VHOST_RING=m
+CONFIG_VHOST=m
 
 #
 # Distributed Switch Architecture drivers
@@ -2654,10 +2624,7 @@ CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
 # CONFIG_WAN is not set
 CONFIG_IEEE802154_DRIVERS=m
 # CONFIG_IEEE802154_FAKEHARD is not set
-CONFIG_XEN_NETDEV_FRONTEND=y
-# CONFIG_XEN_NETDEV_BACKEND is not set
 CONFIG_VMXNET3=m
-CONFIG_HYPERV_NET=m
 CONFIG_ISDN=y
 CONFIG_ISDN_I4L=m
 CONFIG_ISDN_PPP=y
@@ -2997,7 +2964,6 @@ CONFIG_INPUT_PCF50633_PMU=m
 # CONFIG_INPUT_ADXL34X is not set
 # CONFIG_INPUT_IMS_PCU is not set
 # CONFIG_INPUT_CMA3000 is not set
-CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y
 # CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
 
 #
@@ -3015,7 +2981,6 @@ CONFIG_SERIO_RAW=m
 # CONFIG_SERIO_ALTERA_PS2 is not set
 # CONFIG_SERIO_PS2MULT is not set
 # CONFIG_SERIO_ARC_PS2 is not set
-CONFIG_HYPERV_KEYBOARD=m
 CONFIG_GAMEPORT=m
 CONFIG_GAMEPORT_NS558=m
 CONFIG_GAMEPORT_L4=m
@@ -3029,7 +2994,6 @@ CONFIG_TTY=y
 CONFIG_VT=y
 CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
-CONFIG_VT_CONSOLE_SLEEP=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
 CONFIG_UNIX98_PTYS=y
@@ -3078,10 +3042,7 @@ CONFIG_PRINTER=m
 CONFIG_LP_CONSOLE=y
 CONFIG_PPDEV=m
 CONFIG_HVC_DRIVER=y
-CONFIG_HVC_IRQ=y
-CONFIG_HVC_XEN=y
-CONFIG_HVC_XEN_FRONTEND=y
-CONFIG_VIRTIO_CONSOLE=y
+CONFIG_VIRTIO_CONSOLE=m
 CONFIG_IPMI_HANDLER=m
 # CONFIG_IPMI_PANIC_EVENT is not set
 CONFIG_IPMI_DEVICE_INTERFACE=m
@@ -3128,7 +3089,6 @@ CONFIG_TCG_NSC=m
 CONFIG_TCG_ATMEL=m
 CONFIG_TCG_INFINEON=m
 # CONFIG_TCG_ST33_I2C is not set
-# CONFIG_TCG_XEN is not set
 CONFIG_TELCLOCK=m
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
@@ -3483,10 +3443,10 @@ CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
 # CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
 # CONFIG_THERMAL_GOV_FAIR_SHARE is not set
 CONFIG_THERMAL_GOV_STEP_WISE=y
-# CONFIG_THERMAL_GOV_USER_SPACE is not set
+CONFIG_THERMAL_GOV_USER_SPACE=y
 # CONFIG_THERMAL_EMULATION is not set
 # CONFIG_RCAR_THERMAL is not set
-# CONFIG_INTEL_POWERCLAMP is not set
+CONFIG_X86_PKG_TEMP_THERMAL=m
 # CONFIG_ACPI_INT3403_THERMAL is not set
 
 #
@@ -3723,11 +3683,11 @@ CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-CONFIG_FB_SYS_FILLRECT=y
-CONFIG_FB_SYS_COPYAREA=y
-CONFIG_FB_SYS_IMAGEBLIT=y
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
 # CONFIG_FB_FOREIGN_ENDIAN is not set
-CONFIG_FB_SYS_FOPS=y
+CONFIG_FB_SYS_FOPS=m
 CONFIG_FB_DEFERRED_IO=y
 CONFIG_FB_HECUBA=m
 CONFIG_FB_SVGALIB=m
@@ -3750,7 +3710,6 @@ CONFIG_FB_ARC=m
 CONFIG_FB_VGA16=y
 # CONFIG_FB_UVESA is not set
 CONFIG_FB_VESA=y
-# CONFIG_FB_EFI is not set
 CONFIG_FB_N411=m
 CONFIG_FB_HGA=m
 # CONFIG_FB_OPENCORES is not set
@@ -3820,14 +3779,12 @@ CONFIG_FB_SM501=m
 CONFIG_FB_UDL=m
 # CONFIG_FB_GOLDFISH is not set
 # CONFIG_FB_VIRTUAL is not set
-CONFIG_XEN_FBDEV_FRONTEND=y
 CONFIG_FB_METRONOME=m
 CONFIG_FB_MB862XX=m
 CONFIG_FB_MB862XX_PCI_GDC=y
 CONFIG_FB_MB862XX_I2C=y
 CONFIG_FB_BROADSHEET=m
 # CONFIG_FB_AUO_K190X is not set
-# CONFIG_FB_HYPERV is not set
 # CONFIG_FB_SIMPLE is not set
 # CONFIG_EXYNOS_VIDEO is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
@@ -4135,7 +4092,6 @@ CONFIG_HID_SONY=m
 CONFIG_HID_SUNPLUS=y
 CONFIG_HID_GREENASIA=m
 # CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_HYPERV_MOUSE is not set
 CONFIG_HID_SMARTJOYPLUS=m
 # CONFIG_SMARTJOYPLUS_FF is not set
 # CONFIG_HID_TIVO is not set
@@ -4503,6 +4459,8 @@ CONFIG_INFINIBAND_ISER=m
 CONFIG_EDAC=y
 CONFIG_EDAC_LEGACY_SYSFS=y
 # CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_DECODE_MCE=y
+# CONFIG_EDAC_MCE_INJ is not set
 CONFIG_EDAC_MM_EDAC=m
 CONFIG_EDAC_AMD76X=m
 CONFIG_EDAC_E7XXX=m
@@ -4513,6 +4471,7 @@ CONFIG_EDAC_I3000=m
 CONFIG_EDAC_I3200=m
 CONFIG_EDAC_X38=m
 CONFIG_EDAC_I5400=m
+# CONFIG_EDAC_I7CORE is not set
 CONFIG_EDAC_I82860=m
 CONFIG_EDAC_R82600=m
 CONFIG_EDAC_I5000=m
@@ -4632,7 +4591,7 @@ CONFIG_UIO_PCI_GENERIC=m
 # CONFIG_UIO_NETX is not set
 # CONFIG_UIO_MF624 is not set
 # CONFIG_VIRT_DRIVERS is not set
-CONFIG_VIRTIO=y
+CONFIG_VIRTIO=m
 
 #
 # Virtio drivers
@@ -4644,28 +4603,6 @@ CONFIG_VIRTIO_BALLOON=m
 #
 # Microsoft Hyper-V guest support
 #
-CONFIG_HYPERV=m
-CONFIG_HYPERV_UTILS=m
-# CONFIG_HYPERV_BALLOON is not set
-
-#
-# Xen driver support
-#
-CONFIG_XEN_BALLOON=y
-CONFIG_XEN_SCRUB_PAGES=y
-CONFIG_XEN_DEV_EVTCHN=y
-CONFIG_XEN_BACKEND=y
-CONFIG_XENFS=y
-CONFIG_XEN_COMPAT_XENFS=y
-CONFIG_XEN_SYS_HYPERVISOR=y
-CONFIG_XEN_XENBUS_FRONTEND=y
-CONFIG_XEN_GNTDEV=m
-CONFIG_XEN_GRANT_DEV_ALLOC=m
-CONFIG_SWIOTLB_XEN=y
-CONFIG_XEN_PCIDEV_BACKEND=m
-CONFIG_XEN_PRIVCMD=y
-CONFIG_XEN_ACPI_PROCESSOR=m
-CONFIG_XEN_HAVE_PVMMU=y
 CONFIG_STAGING=y
 CONFIG_ET131X=m
 CONFIG_SLICOSS=m
@@ -4829,12 +4766,6 @@ CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
 # CONFIG_GOOGLE_FIRMWARE is not set
 
 #
-# EFI (Extensible Firmware Interface) Support
-#
-CONFIG_EFI_VARS=m
-CONFIG_EFI_RUNTIME_MAP=y
-
-#
 # File systems
 #
 CONFIG_DCACHE_WORD_ACCESS=y
@@ -5018,7 +4949,6 @@ CONFIG_UFS_FS=m
 CONFIG_UFS_FS_WRITE=y
 # CONFIG_UFS_DEBUG is not set
 # CONFIG_F2FS_FS is not set
-# CONFIG_EFIVAR_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V2=m
@@ -5275,7 +5205,6 @@ CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_X86_VERBOSE_BOOTUP=y
 CONFIG_EARLY_PRINTK=y
 # CONFIG_EARLY_PRINTK_DBGP is not set
-# CONFIG_EARLY_PRINTK_EFI is not set
 # CONFIG_X86_PTDUMP is not set
 CONFIG_DEBUG_RODATA=y
 CONFIG_DEBUG_RODATA_TEST=y
@@ -5458,6 +5387,7 @@ CONFIG_CRYPTO_DEV_PADLOCK=m
 CONFIG_CRYPTO_DEV_PADLOCK_AES=m
 CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
 CONFIG_CRYPTO_DEV_GEODE=m
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_CRYPTO_DEV_CCP is not set
 CONFIG_ASYMMETRIC_KEY_TYPE=y
 CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
@@ -5475,7 +5405,6 @@ CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
 CONFIG_KVM_VFIO=y
 CONFIG_VIRTUALIZATION=y
 CONFIG_KVM=m
-CONFIG_KVM_INTEL=m
 CONFIG_KVM_AMD=m
 CONFIG_LGUEST=m
 # CONFIG_BINARY_PRINTF is not set
@@ -5546,7 +5475,6 @@ CONFIG_CLZ_TAB=y
 # CONFIG_DDR is not set
 CONFIG_MPILIB=y
 CONFIG_OID_REGISTRY=y
-CONFIG_UCS2_STRING=y
 CONFIG_FONT_SUPPORT=y
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y

rendegast
Beiträge: 15041
Registriert: 27.02.2006 16:50:33
Lizenz eigener Beiträge: MIT Lizenz

Re: Stromfressende Module

Beitrag von rendegast » 09.08.2014 12:54:47

X86_PAE / HIGHMEM_64G ist heraus, stattdessen HIGHMEM_4G.
Die Virtualisierungsoptionen sind weg, macht bei einem CONFIG_MK7=y
bool "Athlon/Duron/K7"
depends on X86_32
wohl auch keinen Sinn.

Ist CONFIG_MK7=y korrekt?
(Athlon mobile / Powernow_K7)

Eventuell bringt näheres Anschauen der Änderungen acpi / cpu-frequency Hinweise?


den 3.14.11 - Kerne
-> 3.14.16 ?
Wie läuft es mit dem debian Kernel? (evtl. wheezy-backports 3.14)
mfg rendegast
-----------------------
Viel Eifer, viel Irrtum; weniger Eifer, weniger Irrtum; kein Eifer, kein Irrtum.
(Lin Yutang "Moment in Peking")

Benutzeravatar
weedy
Beiträge: 585
Registriert: 02.11.2002 21:47:49
Lizenz eigener Beiträge: GNU General Public License
Kontaktdaten:

Re: Stromfressende Module

Beitrag von weedy » 09.08.2014 13:28:44

rendegast hat geschrieben:
X86_PAE / HIGHMEM_64G ist heraus, stattdessen HIGHMEM_4G.
Die Virtualisierungsoptionen sind weg, macht bei einem CONFIG_MK7=y
bool "Athlon/Duron/K7"
depends on X86_32
wohl auch keinen Sinn.

Ist CONFIG_MK7=y korrekt?
(Athlon mobile / Powernow_K7)

Eventuell bringt näheres Anschauen der Änderungen acpi / cpu-frequency Hinweise?
Also mein Prozzi ist ein "AMD Turion(tm) II Dual-Core Mobile M520" und gehört damit
laut Wikipedia zur Generation K10. Aber was mich wundert ist, dass /proc/cpuinfo in den
Flags 3dnow anzeigt.
fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt hw_pstate npt lbrv svm_lock nrip_save
Wenn ich aber im menuconfig "Opteron/Athlon64/Hammer/K8" auswaehle,
dann verschwindet in .config das 3dnow -feature. Die Frage ist nun: wie
erhaelt /proc/cpuinfo die cpu-flags Information?
-CONFIG_X86_USE_3DNOW=y
Ich glaube nicht, dass ich mit K8 compilieren kann. Kann man das irgendwie testen?

Gruß
weedy

rendegast
Beiträge: 15041
Registriert: 27.02.2006 16:50:33
Lizenz eigener Beiträge: MIT Lizenz

Re: Stromfressende Module

Beitrag von rendegast » 10.08.2014 11:17:43

https://de.wikipedia.org/wiki/3DNow


Kann man das irgendwie testen?
Eingabe einer Petition beim Ministerium für Bildung,
auf eine akademische Testreihe zum Thema "Kernelbau unter Linux".
Ohne solche Unterstützung würde ich

Code: Alles auswählen

make menuconfig
make
vorschlagen.
mfg rendegast
-----------------------
Viel Eifer, viel Irrtum; weniger Eifer, weniger Irrtum; kein Eifer, kein Irrtum.
(Lin Yutang "Moment in Peking")

Antworten