Squeeze Wheezy

[Kane1706]

Hey @all ,

wollte heute mal unsere Maschiene auf den aktuellen Stand bringen und Wheezy über die Kiste Upgraden nun bekomm ich folgende Fehler beim Upgradeversuch:

[Spoiler]eglibc (2.13-25) unstable; urgency=medium

Starting with the eglibc package version 2.13-5, the libraries are
shipped in the multiarch directory /lib/<triplet> instead of the more
traditional /lib, where <triplet> is the multiarch triplet and can be
retrieved with 'dpkg-architecture -qDEB_HOST_MULTIARCH'. Similarly the
includes are now shipped in /usr/include/<triplet> instead of the more
traditional /usr/include.

The toolchain in Debian has been updated to cope with that, and most
build systems should be unaffected. If you are using a non-Debian
toolchain to build your software and it is not able to cope with
multiarch, you might try to pass the following options to your
compiler:

-B/usr/lib/<triplet> -I/usr/include/<triplet>

Alternatively if the build system makes hard to pass the above options,
you might try to set the LIBRARY_PATH and CPATH environment variables:
LIBRARY_PATH=/usr/lib/<triplet>
CPATH=/usr/include/<triplet>
export LIBRARY_PATH CPATH

-- Aurelien Jarno <aurel32@debian.org> Mon, 09 Jan 2012 12:47:16 +0100

eglibc (2.13-7) unstable; urgency=low

Starting with version 2.13, eglibc provides an SSSE3 optimized version
of memcpy() on the amd64 architecture. This version might copy memory
backward in some conditions, which causes issues if the source and
destination overlap. memmove() should be used in such cases, but some
programs still wrongly use memcpy().

For this reason, on the amd64 architecture the Debian package provides
two wrappers which can be use to workaround and/or debug the issue:
- /usr/lib/x86_64-linux-gnu/libc/memcpy-preload.so simply replace all
calls to memcpy() by a call to memmove()
- /usr/lib/x86_64-linux-gnu/libc/memcpy-syslog-preload.so does the same,
but in addition logs (with rate limit) the issue to syslog, so that it
can be detected and fixed.

To use these wrapper on a single binary, the easiest way is to use the
LD_PRELOAD environment variable:
- LD_PRELOAD=/usr/lib/x86_64-linux-gnu/libc/memcpy-preload.so /path/to/binary
- LD_PRELOAD=/usr/lib/x86_64-linux-gnu/libc/memcpy-syslog-preload.so /path/to/binary

For system-wide usage, it is possible to add the path of one of the
wrapper to /etc/ld.so.preload.

For more details about the issue, please see:
http://bugs.debian.org/625521
http://sourceware.org/bugzilla/show_bug.cgi?id=12518

-- Aurelien Jarno <aurel32@debian.org> Sat, 11 Jun 2011 18:02:52 +0200

apt (0.8.11) unstable; urgency=low

* apt-get install pkg/experimental will now not only switch the
candidate of package pkg to the version from the release experimental
but also of all dependencies of pkg if the current candidate can't
satisfy a versioned dependency.

-- David Kalnischkies <kalnischkies@gmail.com> Fri, 03 Dec 2010 14:09:12 +0100

ca-certificates (20130119) unstable; urgency=low

Update mozilla/certdata.txt to version 1.87
Certificates removed (-) (none added):
- "TÜRKTRUST Elektronik Sertifika Hizmet Sağlayıcısı"

-- Michael Shuler <michael@pbandjelly.org> Sat, 19 Jan 2013 14:08:50 -0600

ca-certificates (20121105) unstable; urgency=low

Update mozilla/certdata.txt to version 1.86
Certificates added (+) (none removed):
+ "Actalis Authentication Root CA"
+ "Trustis FPS Root CA"
+ "StartCom Certification Authority" (renewal/rehash)
+ "StartCom Certification Authority G2"
+ "Buypass Class 2 Root CA"
+ "Buypass Class 3 Root CA"
+ "TÜRKTRUST Elektronik Sertifika Hizmet Sağlayıcısı"
+ "T-TeleSec GlobalRoot Class 3"
+ "EE Certification Centre Root CA"

-- Michael Shuler <michael@pbandjelly.org> Mon, 05 Nov 2012 10:56:28 -0600

ca-certificates (20120212) unstable; urgency=low

Update mozilla/certdata.txt to version 1.81
Certificates added (+) and removed (-):
+ "Security Communication RootCA2"
+ "EC-ACC"
+ "Hellenic Academic and Research Institutions RootCA 2011"
- "Verisign Class 2 Public Primary Certification Authority"
- "Verisign Class 4 Public Primary Certification Authority - G2"
- "TC TrustCenter, Germany, Class 2 CA"
- "TC TrustCenter, Germany, Class 3 CA"

-- Michael Shuler <michael@pbandjelly.org> Sun, 12 Feb 2012 15:12:59 -0600

ca-certificates (20111211) unstable; urgency=low

Remove French Government IGC/A CA certificates. The RSA certificate is
included in the Mozilla bundle and the DSA certificate is not in use.
Remove expired signet.pl CAs.
Remove expired brasil.gov.br CA.

-- Michael Shuler <michael@pbandjelly.org> Sun, 11 Dec 2011 19:05:32 -0600

ca-certificates (20111025) unstable; urgency=low

Update mozilla/certdata.txt to latest (NSS branch version 1.64.2.13)
Certificates added (+) and removed (-):
+ "AffirmTrust Commercial"
+ "AffirmTrust Networking"
+ "AffirmTrust Premium"
+ "AffirmTrust Premium ECC"
+ "A-Trust-nQual-03"
+ "Certinomis - Autorité Racine"
+ "Certum Trusted Network CA"
+ "Go Daddy Root Certificate Authority - G2"
+ "Root CA Generalitat Valenciana"
+ "Starfield Root Certificate Authority - G2"
+ "Starfield Services Root Certificate Authority - G2"
+ "TWCA Root Certification Authority"
- "AOL Time Warner Root Certification Authority 1"
- "AOL Time Warner Root Certification Authority 2"
- "DigiNotar Root CA"
- "Entrust.net Global Secure Personal CA"
- "Entrust.net Global Secure Server CA"
- "Entrust.net Secure Personal CA"
- "IPS Chained CAs root"
- "IPS CLASE1 root"
- "IPS CLASE3 root"
- "IPS CLASEA1 root"
- "IPS CLASEA3 root"
- "IPS Timestamping root"
- "Thawte Personal Freemail CA"
- "Thawte Time Stamping CA"
Update CAcert-Class 3-Subroot-certificate Closes: #630232

-- Michael Shuler <michael@pbandjelly.org> Sun, 23 Oct 2011 23:16:57 -0500

ca-certificates-java (20110425) unstable; urgency=low

The package will add a prefix 'debian:' to the aliases in the keystore from
now on. Old entries will be removed during the update but other local
changes will be kept. A backup of the old keystore can be found in
/etc/ssl/certs/java/cacerts.dpkg-old.

-- Torsten Werner <twerner@debian.org> Mon, 25 Apr 2011 15:18:22 +0200

cron (3.0pl1-119) unstable; urgency=low

The semantics of the -L option of the cron daemon have changed: from
now on, the value will be interpreted as a bitmask of various log
selectors, with "1" (log only the start of jobs) being the new default.

Additionally, since -117 (NEWS entry was overlooked), the LSBNAMES
variable in /etc/default/cron was merged with the EXTRA_OPTS variable
as it was redundant.

-- Christian Kastner <debian@kvr.at> Sun, 07 Aug 2011 21:13:19 +0200

cyrus-sasl2 (2.1.25.dfsg1-5) unstable; urgency=low

* Configuration of SQL engine backends have changed from database
specific configuration (e.g. 'mysql') to generic 'sql' auxprop
plugin.

You will need to change your configuration f.e. from:

auxprop_plugin: mysql

to

auxprop_plugin: sql
sql_engine: mysql

Also the SQL query (if used) needs to have '%u' replaced with '%u@%r'
because now user and realm is provided separately.

-- Ondřej Surý <ondrej@debian.org> Mon, 06 Aug 2012 13:12:22 +0200

devscripts (2.11.9) unstable; urgency=low

The default for mk-build-deps --tool option/MKBUILDDEPS_TOOL configuration
changed from "apt-get" to "apt-get --no-install-recommends".

-- James McCoy <jamessan@debian.org> Sun, 17 Jun 2012 22:56:26 +0200

devscripts (2.11.7) unstable; urgency=low

The heuristic used to determine what action to perform when no options are
given to debchange now defaults to 'changelog'. To stay with the previous
behavior, DEBCHANGE_RELEASE_HEURISTIC=log can be added to the configuration
file.

Enabling the changelog heuristic also enables DEBCHANGE_MAINTTRAILER. This
can be disabled by adding DEBCHANGE_MAINTTRAILER=no to the configuration
file.

-- James McCoy <jamessan@debian.org> Sun, 29 Apr 2012 18:38:46 -0400

devscripts (2.11.2) unstable; urgency=low

Support for pgp-style commands has been removed from debsign/debrsign. As
such, the DEBSIGN_SIGNLIKE configuration variable has also been removed.

-- James McCoy <jamessan@debian.org> Tue, 15 Nov 2011 21:36:40 -0500

ifupdown (0.7~rc1+experimental) experimental; urgency=low

The --all option to ifup and ifquery can now be combined with the
--allow option to act on all interfaces of a specific class (still
defaulting to the class 'auto'). If you have custom hook scripts, you
may need to update them. See interfaces(5) for details.

-- Andrew O. Shadura <bugzilla@tut.by> Tue, 17 Apr 2012 01:05:42 +0200

imagemagick (8:6.6.9.7-3) unstable; urgency=low

Please note that imagemagick version 6.6.9.7 has moved its global
configuration files from /usr/share/imagemagick to /etc/ImageMagick,
following the FHS. See the package imagemagick-doc or
http://www.imagemagick.org/script/resources.php for more information
on configuring ImageMagick.
.
This will lose any changes you may have made to these files,
in the extremely unlikely case that you have customized them (doing so
was not officially supported by either upstream or Debian versions
before 6.6.9).

-- Bastien Roucariès <roucaries.bastien+debian@gmail.com> Sun, 01 May 2011 13:43:12 +0200

ipvsadm (1:1.26-1) unstable; urgency=low

This version removes automatic configuration of ipvsadm via debconf to
simplify the package. In most cases the approach is to naive to be useful.

If you want to run ipvsadm on boot, or change bootoption just modify
/etc/default/ipvsadm.

-- Alexander Wirt <formorer@debian.org> Wed, 22 Feb 2012 21:23:03 +0100

ispell (3.3.02-4) unstable; urgency=low

This is the latest, and most probably the last, upstream version of ispell.
Support for HTML or TeX files checking was slightly improved, limited support
for UTF-8 in American and British dictionaries was added (`ispell -T utf8'),
and plenty of old bugs were fixed.


Small, large, huge and insane versions of American and British ispell
dictionaries are now available. They are contained in packages which
names start with the `iamerican-' or `ibritish-' prefixes (for example
iamerican-large, ibritish-small). The medium-sized versions of the
dictionaries are included in `iamerican' and `ibritish' packages.


Unfortunately, ispell seems to be no longer maintained by its upstream
authors, so you should try switching to alternate spell-checkers like
aspell or hunspell.

-- Robert Luberda <robert@debian.org> Tue, 29 Mar 2011 20:18:06 +0200

libhtml-tree-perl (5.00-1) unstable; urgency=low

[THINGS THAT MAY BREAK YOUR CODE OR TESTS]
* Use weak references to avoid memory leaks
See "Weak References" in HTML::Element for details.
* new_from_file now dies if the file cannot be opened. $! records
the specific problem. (Previously, you got a tree with a few
implicit elements.)
* Some methods normally returning a scalar could return the empty
list in certain circumstances. This has been corrected. The
affected methods are: address, deobjectify_text, detach, is_inside,
& pindex.
* deprecate the Version sub/method. Use the VERSION method instead.

-- gregor herrmann <gregoa@debian.org> Fri, 15 Jun 2012 14:50:32 +0200

libjson-perl (2.50-1) unstable; urgency=low

The upstream JSON package formerly consisted of the main module,
JSON, which was an interface that selected the best available
module (in order):

* JSON::XS (available as libjson-xs-perl)
* JSON::PP (formerly included in the JSON package, now available
separately as libjson-pp-perl)

The JSON::PP module is now available in a separate distribution
and corresponding Debian package, and the JSON::PP module formerly
included with this package has been renamed to JSON::backportPP.

As the JSON::backportPP module may be removed in a future release,
it is HIGHLY RECOMMENDED that users install BOTH: libjson-pp-perl
and libjson-xs-perl.

-- Jonathan Yu <jawnsy@cpan.org> Sat, 26 Feb 2011 10:12:34 -0500

linux-base (3) unstable; urgency=low

* Some HP Smart Array controllers are now handled by the new 'hpsa'
driver, rather than the 'cciss' driver.

While the cciss driver presented disk device names beginning with
'cciss/', hpsa makes disk arrays appear as ordinary SCSI disks and
presents device names beginning with 'sd'. In a system that already
has other SCSI or SCSI-like devices, names may change unpredictably.

During the upgrade from earlier versions, you will be prompted to
update configuration files which refer to device names that may
change. You can choose to do this yourself or to follow an automatic
upgrade process. All changed configuration files are backed up with
a suffix of '.old' (or '^old' in one case).

-- Ben Hutchings <ben@decadent.org.uk> Wed, 16 Mar 2011 13:19:34 +0000

logrotate (3.8.0-1) experimental; urgency=low

Please note that this update changes the behaviour of logrotate:

Logrotate now skips directories which are world writable or writable
by group which is not "root" unless the (new) "su" directive is used.

-- Paul Martin <pm@debian.org> Sun, 28 Aug 2011 19:16:36 +0100

lsb (4.1+Debian1) unstable; urgency=low

This version implements a new "Fancy output" in the form of "[....] "
blocks prepended to the daemon status messages:

Before:
Starting/stopping long daemon name: daemond daemon2d
After:
[....] Starting/stopping long daemon name: daemond daemon2d

This block will become either a green [ ok ], a yellow [warn]
or a red [FAIL] depending on the daemon exit status.

The "Fancy output" can be disabled by setting the FANCYTTY variable to 0
in the /etc/lsb-base-logging.sh configuration file.

-- Didier Raboud <odyx@debian.org> Thu, 19 Apr 2012 11:25:01 +0200

mc (3:4.8.1-1) unstable; urgency=low

Config files have been reorganized.
Some settings (e.g. Lynx-like motion) have moved to new "Panel
options" and accidentally reset to their default value.

/usr/share/mc/bin/mc-wrapper.sh and other scripts are relocated to
/usr/lib/mc
Backward compatibility is maintained with symbolic links which
will eventually go away in future releases. Please update your
configuration if necessary.

mcedit now have "Return does autoindent" off by default.

-- Dmitry Smirnov <onlyjob@member.fsf.org> Fri, 24 Feb 2012 13:04:57 +1100

mutt (1.5.21-2) experimental; urgency=low
mailto-mutt has been replaced by a wrapper as per #576313, because mutt is now
able to handle the mailto: urls; additionally it will also do some checks on
attachments and it will allow us to be as close to upstream as possible

-- Antonio Radici <antonio@dyne.org> Sat, 01 Jan 2011 12:56:29 +0000

pam (1.1.2-1) unstable; urgency=low

* Name of option for minimum Unix password length has changed

The Debian-specific 'min=n' option to pam_unix for specifying minimum
lengths for new passwords has been replaced by a new upstream option
called 'minlen=n'. If you are using 'min=n' in
/etc/pam.d/common-password, this will be migrated to the new option name
for you on upgrade. If you have configured pam_unix password changing
elsewhere on your system, such as in a PAM profile under
/usr/share/pam-configs or in other files in /etc/pam.d, you will need to
update them by hand for this change.

-- Steve Langasek <vorlon@debian.org> Tue, 31 Aug 2010 23:09:30 -0700

patch (2.6.1-1) unstable; urgency=low

The options -U --unified-reject-files and --global-reject-file have now been
removed.

-- Christoph Berg <myon@debian.org> Sun, 06 Feb 2011 20:17:11 +0100

php5 (5.4.4-7) unstable; urgency=low

* As a side effect of the MIME-Type changes in the mime-support package,
the default Apache 2 configuration will no longer perform HTTP content
negotiation on the PHP file extensions, which was very questionable
anyway. If you really want to re-enable this support then please read
/usr/share/doc/php5-common/README.Debian file for further
instructions.

-- Ondřej Surý <ondrej@debian.org> Wed, 29 Aug 2012 09:18:41 +0200

php5 (5.4.4-5) unstable; urgency=low

* As a security measure the default configuration for Apache 2 has been
changed to a stricter model. Only files which have the correct
rightmost extension, and at least one character in the filename before
that extension, are now interpreted by PHP. For a full list of
handled extensions please see the Apache 2 configuration. At the time
of writing this paragraph, the list includes the following regular
expressions:

1. .+\.ph(p[345]?|t|tml)$ for PHP files (application/x-httpd-php)
2. .+\.phps$ for PHP source files (application/x-httpd-php-source)

Previously, as a side effect of system MIME type definitions, the
default configuration would allow the interpreting of files with a
double extension, where the second extension was either unrecognised
or a language or content encoding to be interpreted; e.g. an uploaded
file named blackhat.php.foobar or index.php.cs would be interpreted by
PHP. These non-standard definitions have been removed from the
mime-support packages and all configuration of PHP handlers is now
defined in the Apache 2 configuration files.

The standard configuration now also denies access to files with names
which consist of an extension and nothing more; e.g. accessing '/.php'
will now return Access Denied instead of the output of the PHP script.

You can use the following command to find whether there are any files
on your system which would be affected by this change (change <base>
to the directory name where you store PHP files on your system):

# find <base> -name '*.ph[pt].*' -o -name '*.php[345s].*' -o \
-name '*.phtml.*' -o -name '.ph[pt]' -o \
-name '.php[345s]' -o -name '.phtml'

-- Ondřej Surý <ondrej@debian.org> Tue, 21 Aug 2012 09:14:47 +0200

php5 (5.4.0~rc8-1) unstable; urgency=low

php5-fpm default www spool now listens on unix socket located
in /var/run/php5-fpm.sock instead of localhost:9000. If you
have configured your webserver to use localhost:9000, you will
have to change your settings.

-- Ondřej Surý <ondrej@debian.org> Wed, 08 Feb 2012 08:25:30 +0100

php5 (5.4.0~rc6-2) unstable; urgency=low

t1lib support was removed from PHP 5.4. t1lib has many security
issues and is unmaintained by upstream for a very long time (3 years).

For more information see:
+ http://bugs.debian.org/637488
+ http://bugs.debian.org/638755

This unfortunately also means that following functions are not
available in PHP5 from now:

- imagepsloadfont
- imagepsfreefont
- imagepsencodefont
- imagepsextendfont
- imagepsslantfont
- imagepstext
- imagepsbbox

If you really need those functions you will need to install t1lib from
sources. You will need to install php5-dev and recompile GD extension
(roughly) using following commands:

cd <path_to_php5_sources>/ext/gd/
phpize
configure --with-gd=shared,/usr --enable-gd-native-ttf \
--with-t1lib=<location_of_your_t1lib>
make
make install

-- Ondřej Surý <ondrej@debian.org> Wed, 01 Feb 2012 18:19:45 +0100

php5 (5.3.9-4) unstable; urgency=low

* The Suhosin patch is now disabled in the default build.

If you want to re-enable it again for your installation, you can
set the option PHP5_SUHOSIN=yes in debian/rules and recompile PHP.

-- Ondřej Surý <ondrej@debian.org> Sat, 28 Jan 2012 08:39:36 +0100

php5 (5.3.6-13) unstable; urgency=low

* Updated blowfish crypt() algorithm fixes the 8-bit character handling
vulnerability (CVE-2011-2483) and adds more self-tests. Unfortunately
this change is incompatible with some old (wrong) generated hashes for
passwords containing 8-bit characters.

It is recommended that any passwords containing characters with
the 8th bit set be changed after this upgrade. In order to allow users
to log in after the upgrade even if they have a potentially affected
password, the newly introduced backwards compatibility hash encoding
prefix of "$2x$" may be used (in place of the usual "$2a$"). Such
password hashes should only be used during a transition period; when
passwords are changed, the usual "$2a$" prefix is used, denoting the
correct algorithm.

-- Ondřej Surý <ondrej@debian.org> Mon, 04 Jul 2011 10:31:16 +0200

procps (1:3.3.1-1) unstable; urgency=low

* top has a new rcfile format from 3.3.1 which is not backwards compatible
from a rcfile save from a pre-3.3.1 top.

-- Craig Small <csmall@debian.org> Mon, 23 Jan 2012 22:26:16 +1100

qdbm (1.8.78-1) unstable; urgency=low

gdbm emulation (hovel) is dropped from this version (cf. #620550).
It breaks symbol versioning policy to keep its old version despite
dropping gdbm_* symbols, assuming nobody use it.
If you've used its functionarity, please switch to gdbm, or rebuild
source package removing "--disable-gdbm" flag.

-- KURASHIKI Satoru <lurdan@gmail.com> Fri, 19 Aug 2011 08:38:15 +0900

rsyslog (5.8.1-1) unstable; urgency=low

The way rsyslog processes SIGHUP has changed. It no longer does a reload
of its configuration, but simply closes all open files, which is a much more
lightweight operation.
To apply a changed configuration, rsyslogd needs to be restarted now.
As a consequence, the reload action has been dropped from the init script.

A new action called "rotate" was added to the init script, which signals
rsyslogd to close all open files. This new action is used in the rsyslog
logrotate configuration file.

For more information, see:
http://www.rsyslog.com/doc/v4compatibility.html
http://www.rsyslog.com/doc/v5compatibility.html

-- Michael Biebl <biebl@debian.org> Mon, 30 May 2011 18:26:51 +0200

sbcl (1:1.0.47.0-2) unstable; urgency=low

Starting with sbcl 1.0.47.0-2 common-lisp-controller has been dropped
from the sbcl packages. One of the results of this is asdf no longer
being available on startup. To get the old behaviour put `(require
'asdf)` in /etc/sbclrc

-- Christoph Egger <christoph@debian.org> Tue, 10 May 2011 22:50:18 +0200

screen (4.1.0~20120320gitdb59704-7) unstable; urgency=low

In case you upgrade screen from 4.0.3 to 4.1.0 while running inside
screen and you have to reconnect to that screen session (or any other
screen session which has been started before the upgrade), there may be
a few screen features not working until you exit the 4.0.3-started
session and replace it with a 4.1.0-started session.

Known issues of 4.0.3 to 4.1.0 interoperability as of now:

* Terminal window resizing (WINCH signal) does not propagate to the
screen session. Detach and reattach again instead to get the size of
the terminals inside the screen session adjusted propely.

-- Axel Beckert <abe@debian.org> Sun, 16 Sep 2012 12:48:44 +0200

sgml-base (1.26+nmu2) unstable; urgency=low

Starting with this release the SGML super catalog /etc/sgml/catalog will be
replaced with a symbolic link to /var/lib/sgml-base/supercatalog. The latter
file can be regenerated from the contents of the /etc/sgml directory including
all files ending in .cat using the new update-catalog --update-super option.
This call will be (dpkg) triggered by packages placing files in /etc/sgml. The
transition to this way of handling the super catalog will loose user changes to
/etc/sgml/catalog. Further overwriting of user changes will happen until all
packages using dh_installcatalogs are built with a fixed version of debhelper.
Sorry for the inconvenience.

-- Helmut Grohne <helmut@subdivi.de> Mon, 30 Apr 2012 16:37:01 +0200

sysvinit-utils (2.88dsf-17) unstable; urgency=low

bootlogd has moved from sysvinit-utils to a separate bootlogd package. If
you wish to continue using bootlogd, please install the bootlogd package.
Note that the configuration file /etc/default/bootlogd and its option
BOOTLOGD_ENABLE no longer exist; if you do not wish to run bootlogd, remove
the bootlogd package.

-- Josh Triplett <josh@joshtriplett.org> Mon, 19 Dec 2011 12:03:08 +0000

vim (2:7.3.154+hg~74503f6ee649-1) unstable; urgency=low

The vim-lesstif package has been removed in favor of the new vim-athena
package. The intent behind both packages is to provide a lighter-weight GUI
package as well as one that allows using XFLD fonts. The Athena toolkit,
however, has broader usage and reduces divergences with downstream
distributions.

-- James Vega <jamessan@debian.org> Sun, 27 Feb 2011 12:45:40 -0500

[/Spoiler]

[deberik]

Das sind keine Fehler, sondern Informationen an den Admin, wenn es Änderungen gibt, die evtl. händisches Nacharbeiten erfordern.

Durchlesen und mit q beenden, dann gehts weiter

[Luxuslurch]

1. nopaste!
2. Wieso Fehler? Das sind Hinweise von apt-listchanges - siehe auch Anwenderhandbuch.
Wenn du meinst, dass dich die Hinweise nicht betreffen, kannst du einfach weitermachen mit dem dist-upgrade. Eigentlich sollten auch alle Hinweise in den relase notes zu finden sein.

PS: Viel Erfolg!

edit: deberik war viiiel schneller...

[deberik]

edit: deberik war viiiel schneller...

Ganze 5 Minuten :O Dafür ist es bei dir schöner verlinkt/erläutert

[Luxuslurch]

Na klar, gute Recherche kostet Zeit