X-Problem bei Lenny

Du kommst mit der Installation nicht voran oder willst noch was nachfragen? Schau auch in den "Tipps und Tricks"-Bereich.
Antworten
Benutzeravatar
rolfti
Beiträge: 331
Registriert: 09.08.2004 22:29:44
Wohnort: Lugano

X-Problem bei Lenny

Beitrag von rolfti » 24.02.2010 09:57:22

hi, zwei Rechner (beide Lenny ca. 3-Monate alt) und bei beiden dasselbe Verhalten:
der Fehler tritt bspw. beim E-Mail Abruf via Kontact auf. Plötzlich wird der Bildschirm schwarz und es zeigt sich nur noch ein 4mm grosses "x".
Keine Möglichkeit via CTRL-ALT-F4 eine neue Sessions aufzustarten, ... keine Reaktion, bleibt nur noch Power-OFF
Dies /var/log/Xorg.0.log:

Code: Alles auswählen

(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
(WW) intel: No matching Device section for instance (BusID PCI:0:2:1) found
(WW) intel(0): Register 0x61114 (PORT_HOTPLUG_STAT) changed from 0x00000000 to 0x00000b00
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) Configured Mouse: No Device specified, looking for one...
und dies /var/log/kdm.log:

Code: Alles auswählen

SetGrabKeysState - disabled
SetGrabKeysState - enabled
SetClientVersion: 0 9
-
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
Error in I830WaitLpRing(), timeout for 2 seconds
-
Backtrace:
0: /usr/bin/X(xf86SigHandler+0x7e) [0x80c91ce]
1: [0xb7f0e400]
2: /usr/bin/X(XkbRemoveResourceClient+0xc9) [0x8196839]
3: /usr/bin/X [0x808602a]
4: /usr/bin/X(CloseDownDevices+0x30) [0x8086290]
5: /usr/bin/X(AbortServer+0x23) [0x81c5dd3]
6: /usr/bin/X(FatalError+0x63) [0x81c6353]
7: /usr/lib/xorg/modules/drivers//intel_drv.so(I830WaitLpRing+0x211) [0xb7ab0b91]
8: /usr/lib/xorg/modules/drivers//intel_drv.so(I830Sync+0x1cb) [0xb7ab0fbb]
9: /usr/lib/xorg/modules/drivers//intel_drv.so [0xb7ad79aa]
10: /usr/lib/xorg/modules//libexa.so(exaWaitSync+0x55) [0xb7986775]
11: /usr/lib/xorg/modules//libexa.so(exaPrepareAccess+0x63) [0xb7987193]
12: /usr/lib/xorg/modules//libexa.so(exaMoveInPixmap+0x2e3) [0xb798acd3]
13: /usr/lib/xorg/modules//libexa.so(exaDoMigration+0x54d) [0xb798b37d]
14: /usr/lib/xorg/modules//libexa.so [0xb798c3ba]
15: /usr/lib/xorg/modules//libexa.so(exaComposite+0x9d5) [0xb798d235]
16: /usr/lib/xorg/modules//libexa.so(exaGlyphs+0xd4d) [0xb798ea4d]
17: /usr/bin/X [0x81758bd]
18: /usr/bin/X(CompositeGlyphs+0x9a) [0x815e76a]
19: /usr/bin/X [0x8166476]
20: /usr/bin/X [0x8161575]
21: /usr/bin/X [0x8154bf4]
22: /usr/bin/X(Dispatch+0x314) [0x808de24]
23: /usr/bin/X(main+0x4b5) [0x8074795]
24: /lib/i686/cmov/libc.so.6(__libc_start_main+0xe5) [0xb7cb1455]
25: /usr/bin/X(FontFileCompleteXLFD+0x21d) [0x8073a81]

FatalError re-entered, aborting
Caught signal 11.  Server aborting
-
(WW) intel: No matching Device section for instance (BusID PCI:0:2:1) found
(II) Module "ddc" already built-in
(II) Module "i2c" already built-in
(II) Module "ramdac" already built-in
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
thx

Benutzeravatar
ip
Beiträge: 347
Registriert: 16.05.2007 06:24:04

Re: X-Problem bei Lenny

Beitrag von ip » 24.02.2010 14:06:16

hi,

ich habe so ein ähnliches verhalten, welches sporadisch beim arbeiten auftritt.
ich bin der meinung es kommt vom iceweasel, kann es aber nicht genau festmachen.

installier mal openssh-server!
wenn dein system aussteigt, melde dich über einen zweiten rechner an und prüfe mal das verhalten mit:
- top
- /etc/init.d/kdm restart
...
vielleicht bekommst du dann mehr informationen!

mfg
-ip-

Benutzeravatar
rolfti
Beiträge: 331
Registriert: 09.08.2004 22:29:44
Wohnort: Lugano

Re: X-Problem bei Lenny

Beitrag von rolfti » 24.02.2010 14:15:43

Danke @ip

Code: Alles auswählen

installier mal openssh-server!
wenn dein system aussteigt, melde dich über einen zweiten rechner an und prüfe mal das verhalten mit:
- top
- /etc/init.d/kdm restart
vielleicht bekommst du dann mehr informationen!
openssh-server ist installiert.
Leider ist es so, das anschliessend ich keine Chance habe eine zweite Session/Konsole zu starten.
Bildschrim zeigt nur "x", dass ich zwar mit der Maus steuern kann, aber nicht mehr.

Code: Alles auswählen

Ich bin der meinung es kommt vom iceweasel...
Kann ich nicht sagen, bei uns/mir kommt es zur Blockade auch wenn bspw. OO läuft, oder E-Mail via Kontact abgerufen werden.
Gruss

Benutzeravatar
ip
Beiträge: 347
Registriert: 16.05.2007 06:24:04

Re: X-Problem bei Lenny

Beitrag von ip » 24.02.2010 15:35:39

hi,

das mit iceweasel war auf mein system gemünzt...

du musst dich im fehlerfall schon auf die textconsole des systems von einen zweiten rechner einloggen.
dann schaust du mit
- top -d1
welche prozesse extreme last brauchen
- /etc/init.d/kdm restart
startet deinen KDE neu (falls die die einsetzt)

mfg
-ip-

Felis
Beiträge: 398
Registriert: 14.04.2006 17:00:13

Re: X-Problem bei Lenny

Beitrag von Felis » 25.02.2010 17:14:57

rolfti hat geschrieben:Keine Möglichkeit via CTRL-ALT-F4 eine neue Sessions aufzustarten, ... keine Reaktion, bleibt nur noch Power-OFF

Bevor du das machst solltest du, da der Rechner ja noch zu leben scheint, mit
Alt+Druck+R
Alt+Druck+S
Alt+Druck+E
Alt+Druck+I
Alt+Druck+U
Alt+Druck+B
versuchen den Rechner zu rebooten.
Vielleicht erstellst aucn - nach vorheriger Sicherung!! - eine neue xorg.conf.
dpkg-reconfigure -phigh xserver-xorg
vorher original xorg.conf löschen.

Benutzeravatar
catdog2
Beiträge: 5352
Registriert: 24.06.2006 16:50:03
Lizenz eigener Beiträge: MIT Lizenz

Re: X-Problem bei Lenny

Beitrag von catdog2 » 26.02.2010 23:58:19

Alt+Druck+R
Nimmt dem x-server das Keyboard weg, manchmal kann man danach wieder auf eine konsole wechseln.
Unix is user-friendly; it's just picky about who its friends are.

Antworten