Debian-Sid, 2.6.30-1-686
Ssanner ein alter Highscreen, Linotypehell Office2
Controller Tekram, modul dc395x
Der Scanner wird nur werkannt, wenn ich ihn beim Booten schon eingeschaltet habe, früher konnte ich ihn auch naher per scsiadd -s hinzufügen. Außerdem ist beim Booten ohne eingeschaltetem Scanner kein /dev/sg0 vorhanden.
Konnte 2 Seiten einscannen, dann streikte der Scanner, hab ihn aus- und wieder eingeschaltet, aber er läßt sich nicht ansprechen. sane-find-scanenr, scsiadd-s und rescan-scsi-bus-sh bringen folgende Meldungen
Was ist hier los!Nathan:/home/joerg# sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
found SCSI scanner "LinoHell Office2 V2.4" at /dev/sg0
# Your SCSI scanner was detected. It may or may not be supported by SANE. Try
# scanimage -L and read the backend's manpage.
# No USB scanners found. If you expected something different, make sure that
# you have loaded a kernel driver for your USB host controller and have setup
# the USB system correctly. See man sane-usb for details.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
Nathan:/home/joerg# scsiadd -s
scsiadd:scsiadd(): could not open /proc/scsi/scsi (w): No such file or directory
scsiadd:scsiadd(): could not open /proc/scsi/scsi (w): No such file or directory
scsiadd:scsiadd(): could not open /proc/scsi/scsi (w): No such file or directory
scsiadd:scsiadd(): could not open /proc/scsi/scsi (w): No such file or directory
scsiadd:scsiadd(): could not open /proc/scsi/scsi (w): No such file or directory
scsiadd:scsiadd(): could not open /proc/scsi/scsi (w): No such file or directory
scsiadd:scsiadd(): could not open /proc/scsi/scsi (w): No such file or directory
scsiadd:scsiadd(): could not open /proc/scsi/scsi (w): No such file or directory
scsiadd:scsiadd(): could not open /proc/scsi/scsi (w): No such file or directory
scsiadd:scsiadd(): could not open /proc/scsi/scsi (w): No such file or directory
scsiadd:scsiadd(): could not open /proc/scsi/scsi (w): No such file or directory
scsiadd:scsiadd(): could not open /proc/scsi/scsi (w): No such file or directory
scsiadd:scsiadd(): could not open /proc/scsi/scsi (w): No such file or directory
scsiadd:scsiadd(): could not open /proc/scsi/scsi (w): No such file or directory
scsiadd:scsiadd(): could not open /proc/scsi/scsi (w): No such file or directory
Nathan:/home/joerg# rescan-scsi-bus.sh
Error: SCSI subsystem not active
Nathan:/home/joerg#
mfg
schwedenmann