(solved)Dell GX280 xorg.conf

Du kommst mit der Installation nicht voran oder willst noch was nachfragen? Schau auch in den "Tipps und Tricks"-Bereich.
Antworten
Benutzeravatar
mosa
Beiträge: 324
Registriert: 29.10.2004 09:53:35

(solved)Dell GX280 xorg.conf

Beitrag von mosa » 25.08.2009 08:58:57

hi, habe Schwierigkeiten mit der Grafik-Karte. Ein Bildschirm ist zwar nicht angeschlossen, konsole reicht (Fileserver). Doch für "gxmessage" reicht es eben doch nicht 8O
OS ist Lenny. Starte ich den Testlauf kommt:
08:36:45 root@tip1:~> X -config /etc/X11/xorg.conf

Code: Alles auswählen

X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux Debian (xorg-server 2:1.4.2-10.lenny2)
Current Operating System: Linux sirius 2.6.26-2-686 #1 SMP Sun Jun 21 04:57:38 UTC 2009 i686
Build Date: 08 June 2009  09:12:57AM

        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug 25 08:36:47 2009
(++) Using config file: "/etc/X11/xorg.conf"
(II) Module "ddc" already built-in
(II) Module "ddc" already built-in
(WW) VESA(0): Failed to set up write-combining range (0xc0000000,0x7b0000)
Could not init font path element unix/:7100, removing from list!
Could not init font path element /usr/share/fonts/X11/100dpi/:unscaled, removing from list!
Could not init font path element /usr/share/fonts/X11/75dpi/:unscaled, removing from list!
Could not init font path element /usr/share/fonts/X11/Type1, removing from list!
Could not init font path element /usr/share/fonts/X11/100dpi, removing from list!
Could not init font path element /usr/share/fonts/X11/75dpi, removing from list!
Could not init font path element /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, removing from list!
[config/hal] couldn't initialise context: (null) ((null))
hier stockt der Durchlauf, bleibt nur noch Control-C, dann:

Code: Alles auswählen

[config/hal] couldn't initialise context: (null) ((null))
^CFreeFontPath: FPE "/usr/share/fonts/X11/misc" refcount is 2, should be 1; fixing. 
Die Folge

Code: Alles auswählen

: 08:47:55 root@tip1:~>echo $DISPLAY

08:47:58 root@tip1:~>  
Hier die xorg.conf: http://nopaste.debianforum.de/24363
lspci zeigt dies:

Code: Alles auswählen

08:47:58 root@tip1:~>lspci
00:00.0 Host bridge: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub (rev 04)
00:01.0 PCI bridge: Intel Corporation 82915G/P/GV/GL/PL/910GL PCI Express Root Port (rev 04)
00:02.0 VGA compatible controller: Intel Corporation 82915G/GV/910GL Integrated Graphics Controller (rev 04)
00:02.1 Display controller: Intel Corporation 82915G Integrated Graphics Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d3)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 01)
08:49:52 root@tip1:~> 
Zuletzt geändert von mosa am 26.08.2009 13:20:03, insgesamt 1-mal geändert.

rendegast
Beiträge: 15041
Registriert: 27.02.2006 16:50:33
Lizenz eigener Beiträge: MIT Lizenz

Re: Dell GX280 xorg.conf

Beitrag von rendegast » 25.08.2009 10:35:04

Nach der Ausgabe sind keine Fonts für X installiert.
( xfonts-100dpi xfonts-75dpi xfonts-base xfonts-scalable )
Installation des Metapakets xorg oder von xserver-xorg + Recommends sollte das nachholen.


Wenn keine Ausgabe gebraucht wird, könntest Du hiermit herumspielen:
http://packages.debian.org/search?keywo ... ideo-dummy



-------------------------------
Aber
gxmessage dep. libfontconfig1 dep. fontconfig-config dep.
ttf-dejavu
Metapackage to pull in ttf-dejavu-core and ttf-dejavu-extra
or ttf-bitstream-vera
The Bitstream Vera family of free TrueType fonts
or ttf-freefont
Freefont Serif, Sans and Mono Truetype fonts
or gsfonts-x11
Diese Fonts landen in
/usr/share/fonts/truetype/ bzw.
/usr/share/fonts/type1/,
also vielleicht diesen Pfad in xorg.conf einsetzen, da sie scheinbbar nicht in eins der angegebenen Verzeichnisse verlinkt sind?
mfg rendegast
-----------------------
Viel Eifer, viel Irrtum; weniger Eifer, weniger Irrtum; kein Eifer, kein Irrtum.
(Lin Yutang "Moment in Peking")

Benutzeravatar
mosa
Beiträge: 324
Registriert: 29.10.2004 09:53:35

Re: Dell GX280 xorg.conf

Beitrag von mosa » 26.08.2009 13:19:12

@rendegast
:hail: Dank dir. Nun ist's ok

Antworten