Probleme bei upgrade (unstable)

Warum Debian und/oder eine seiner Spielarten? Was muss ich vorher wissen? Wo geht es nach der Installation weiter?
Antworten
dbs
Beiträge: 8
Registriert: 30.09.2008 09:48:31

Probleme bei upgrade (unstable)

Beitrag von dbs » 24.02.2009 09:22:28

Moin,

kann mir einer eine Tipp geben wie ich das wieder gefixt bekomme?

System ist Debian 4.0 (unstable).

Code: Alles auswählen

test-system:/home/tester# apt-get upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages will be upgraded:
  acpid eject libc6 libc6-i686 libgcrypt11 libice6 libpng12-0 libselinux1 libxapian15 ttf-dejavu ttf-dejavu-core ttf-dejavu-extra
12 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 0B/11.9MB of archives.
After this operation, 950kB of additional disk space will be used.
Do you want to continue [Y/n]? y
Preconfiguring packages ...
(Reading database ... 22982 files and directories currently installed.)
Preparing to replace libc6 2.7-18 (using .../archives/libc6_2.9-3_i386.deb) ...
Checking for services that may need to be restarted...
Checking init scripts...
touch: setting times of `/etc/ld.so.nohwcap': Bad address
dpkg: error processing /var/cache/apt/archives/libc6_2.9-3_i386.deb (--unpack):
 subprocess pre-installation script returned error exit status 1
Errors were encountered while processing:
 /var/cache/apt/archives/libc6_2.9-3_i386.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
apt-get install -f brachte keinen Erfolg.

Danke schon mal für Eure Unterstützung.

Gruß dbs

openIT

Re: Probleme bei upgrade (unstable)

Beitrag von openIT » 24.02.2009 09:44:51

Zeig mal bitte deine sources.list

dbs
Beiträge: 8
Registriert: 30.09.2008 09:48:31

Re: Probleme bei upgrade (unstable)

Beitrag von dbs » 24.02.2009 10:02:18

Hi,

anbei wie gewünscht. :)

Code: Alles auswählen

deb http://ftp.de.debian.org/debian unstable main non-free
deb-src http://ftp.de.debian.org/debian unstable main non-free

#deb http://security.debian.org/ etch/updates main contrib
#deb-src http://security.debian.org/ etch/updates main contrib

openIT

Re: Probleme bei upgrade (unstable)

Beitrag von openIT » 24.02.2009 10:08:25

Alles klar danke :)

Gleich vorweg möchte ich dir empfehlen unter einem unstable kein upgrade zu machen, sondern immer dist-upgrade. Da du bei unstable immer quasi die ganze Distribution aktualisierst, kriegt das nur dist-upgrade in den Griff, wenn mal Pakete entfernt werden müssen usw...

Für mal das aus:

apt-get clean
apt-get update
apt-get dist-upgrade

Benutzeravatar
trompetenkaefer
Beiträge: 1767
Registriert: 24.09.2007 09:40:16
Kontaktdaten:

Re: Probleme bei upgrade (unstable)

Beitrag von trompetenkaefer » 24.02.2009 10:09:50

Willst du von Etch (stable) direkt auf unstable updaten?
I. d. R. ist es besser wenn man von stable auf testing und dann auf unstable updatet. (meine bisherigen Erfahrungen :wink: )

Außerdem ist der Befehl zum einspielen einer neueren Debian-Version nicht upgrade sondern

Code: Alles auswählen

apt-get dist-upgrade
Grüße
trompetenkaefer
Grüße
trompetenkaefer - Mein Blog http://trompetenkaefer.wordpress.com/

dbs
Beiträge: 8
Registriert: 30.09.2008 09:48:31

Re: Probleme bei upgrade (unstable)

Beitrag von dbs » 24.02.2009 10:18:14

openIT hat geschrieben:Alles klar danke :)

Gleich vorweg möchte ich dir empfehlen unter einem unstable kein upgrade zu machen, sondern immer dist-upgrade. Da du bei unstable immer quasi die ganze Distribution aktualisierst, kriegt das nur dist-upgrade in den Griff, wenn mal Pakete entfernt werden müssen usw...

Für mal das aus:

apt-get clean
apt-get update
apt-get dist-upgrade
Okay, das mit dem dist-upgrade habe ich nicht gewusst. Ich habe es bisher immer so gehalten, das ich zuerst ein apt-get upgrade gemacht habe und wenn dann noch etwas nicht installiert worden ist erst ein dist-upgrade durchgeführt habe.

Anbei der Output der drei Befehle:

Code: Alles auswählen

test-system:/home/tester# apt-get clean
test-system:/home/tester# apt-get update
Hit http://ftp.de.debian.org unstable Release.gpg
Ign http://ftp.de.debian.org unstable/main Translation-en_US
Ign http://ftp.de.debian.org unstable/non-free Translation-en_US
Hit http://ftp.de.debian.org unstable Release
Hit http://ftp.de.debian.org unstable/main Packages/DiffIndex
Hit http://ftp.de.debian.org unstable/non-free Packages/DiffIndex
Hit http://ftp.de.debian.org unstable/main Sources/DiffIndex
Hit http://ftp.de.debian.org unstable/non-free Sources/DiffIndex
Hit http://ftp.de.debian.org unstable/main Packages
Hit http://ftp.de.debian.org unstable/non-free Packages
Hit http://ftp.de.debian.org unstable/main Sources
Hit http://ftp.de.debian.org unstable/non-free Sources
Reading package lists... Done
test-system:/home/tester# apt-get dist-upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
The following NEW packages will be installed:
  acpi-support-base
The following packages will be upgraded:
  acpid eject libc6 libc6-i686 libgcrypt11 libice6 libpng12-0 libselinux1 libxapian15 ttf-dejavu ttf-dejavu-core ttf-dejavu-extra
12 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 11.9MB of archives.
After this operation, 1040kB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://ftp.de.debian.org unstable/main libc6 2.9-3 [4548kB]
Get:2 http://ftp.de.debian.org unstable/main libc6-i686 2.9-3 [1231kB]
Get:3 http://ftp.de.debian.org unstable/main libselinux1 2.0.71-1 [73.6kB]
Get:4 http://ftp.de.debian.org unstable/main libgcrypt11 1.4.4-2 [269kB]
Get:5 http://ftp.de.debian.org unstable/main libxapian15 1.0.10-1 [799kB]
Get:6 http://ftp.de.debian.org unstable/main acpid 1.0.8-6 [41.0kB]
Get:7 http://ftp.de.debian.org unstable/main acpi-support-base 0.109-11 [22.5kB]
Get:8 http://ftp.de.debian.org unstable/main eject 2.1.5+deb1+cvs20081104-5 [52.9kB]
Get:9 http://ftp.de.debian.org unstable/main libice6 2:1.0.5-1 [50.3kB]
Get:10 http://ftp.de.debian.org unstable/main libpng12-0 1.2.35-1 [167kB]
Get:11 http://ftp.de.debian.org unstable/main ttf-dejavu-core 2.28-2 [1430kB]
Get:12 http://ftp.de.debian.org unstable/main ttf-dejavu-extra 2.28-2 [3161kB]
Get:13 http://ftp.de.debian.org unstable/main ttf-dejavu 2.28-2 [27.9kB]
Fetched 11.9MB in 1s (7674kB/s)
Preconfiguring packages ...
(Reading database ... 22982 files and directories currently installed.)
Preparing to replace libc6 2.7-18 (using .../archives/libc6_2.9-3_i386.deb) ...
Checking for services that may need to be restarted...
Checking init scripts...
touch: setting times of `/etc/ld.so.nohwcap': Bad address
dpkg: error processing /var/cache/apt/archives/libc6_2.9-3_i386.deb (--unpack):
 subprocess pre-installation script returned error exit status 1
Errors were encountered while processing:
 /var/cache/apt/archives/libc6_2.9-3_i386.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
test-system:/home/tester#
Leider scheint das nichts gebracht zu haben
trompetenkaefer hat geschrieben:Willst du von Etch (stable) direkt auf unstable updaten?
I. d. R. ist es besser wenn man von stable auf testing und dann auf unstable updatet. (meine bisherigen Erfahrungen :wink: )

Außerdem ist der Befehl zum einspielen einer neueren Debian-Version nicht upgrade sondern

Code: Alles auswählen

apt-get dist-upgrade
Grüße
trompetenkaefer
Der Server ist schon einige Zeit (6 Monate, bisher ohne Probleme beim upgraden) am laufen.
Ich bin damals direkt von der Grundinstalltion meines Providers auf unstable gewechselt.
Beim nächsten mal werde ich deinen Tipp berücksichtigen. Danke.

openIT

Re: Probleme bei upgrade (unstable)

Beitrag von openIT » 24.02.2009 10:37:48

Was passiert bei

apt-get clean
apt-get update
apt-get install libc6
apt-get dist-upgrade

?

dbs
Beiträge: 8
Registriert: 30.09.2008 09:48:31

Re: Probleme bei upgrade (unstable)

Beitrag von dbs » 24.02.2009 11:26:40

:(

Code: Alles auswählen

test-system:/home/tester# apt-get clean
test-system:/home/tester# apt-get update
Hit http://ftp.de.debian.org unstable Release.gpg
Ign http://ftp.de.debian.org unstable/main Translation-en_US
Ign http://ftp.de.debian.org unstable/non-free Translation-en_US
Hit http://ftp.de.debian.org unstable Release
Hit http://ftp.de.debian.org unstable/main Packages/DiffIndex
Hit http://ftp.de.debian.org unstable/non-free Packages/DiffIndex
Hit http://ftp.de.debian.org unstable/main Sources/DiffIndex
Hit http://ftp.de.debian.org unstable/non-free Sources/DiffIndex
Hit http://ftp.de.debian.org unstable/main Packages
Hit http://ftp.de.debian.org unstable/non-free Packages
Hit http://ftp.de.debian.org unstable/main Sources
Hit http://ftp.de.debian.org unstable/non-free Sources
Reading package lists... Done
test-system:/home/tester# apt-get install libc6
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
  libc6-i686
Suggested packages:
  locales glibc-doc
The following packages will be upgraded:
  libc6 libc6-i686
2 upgraded, 0 newly installed, 0 to remove and 11 not upgraded.
Need to get 5779kB of archives.
After this operation, 406kB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://ftp.de.debian.org unstable/main libc6 2.9-3 [4548kB]
Get:2 http://ftp.de.debian.org unstable/main libc6-i686 2.9-3 [1231kB]
Fetched 5779kB in 0s (7776kB/s)
Preconfiguring packages ...
(Reading database ... 22982 files and directories currently installed.)
Preparing to replace libc6 2.7-18 (using .../archives/libc6_2.9-3_i386.deb) ...
Checking for services that may need to be restarted...
Checking init scripts...
touch: setting times of `/etc/ld.so.nohwcap': Bad address
dpkg: error processing /var/cache/apt/archives/libc6_2.9-3_i386.deb (--unpack):
 subprocess pre-installation script returned error exit status 1
Errors were encountered while processing:
 /var/cache/apt/archives/libc6_2.9-3_i386.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
test-system:/home/tester# apt-get dist-upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
The following NEW packages will be installed:
  acpi-support-base
The following packages will be upgraded:
  acpid eject libc6 libc6-i686 libgcrypt11 libice6 libpng12-0 libselinux1 libxapian15 man-db ttf-dejavu ttf-dejavu-core ttf-dejavu-extra
13 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 7280kB/13.1MB of archives.
After this operation, 1331kB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://ftp.de.debian.org unstable/main libselinux1 2.0.71-1 [73.6kB]
Get:2 http://ftp.de.debian.org unstable/main libgcrypt11 1.4.4-2 [269kB]
Get:3 http://ftp.de.debian.org unstable/main libxapian15 1.0.10-1 [799kB]
Get:4 http://ftp.de.debian.org unstable/main man-db 2.5.4-1 [1186kB]
Get:5 http://ftp.de.debian.org unstable/main acpid 1.0.8-6 [41.0kB]
Get:6 http://ftp.de.debian.org unstable/main acpi-support-base 0.109-11 [22.5kB]
Get:7 http://ftp.de.debian.org unstable/main eject 2.1.5+deb1+cvs20081104-5 [52.9kB]
Get:8 http://ftp.de.debian.org unstable/main libice6 2:1.0.5-1 [50.3kB]
Get:9 http://ftp.de.debian.org unstable/main libpng12-0 1.2.35-1 [167kB]
Get:10 http://ftp.de.debian.org unstable/main ttf-dejavu-core 2.28-2 [1430kB]
Get:11 http://ftp.de.debian.org unstable/main ttf-dejavu-extra 2.28-2 [3161kB]
Get:12 http://ftp.de.debian.org unstable/main ttf-dejavu 2.28-2 [27.9kB]
Fetched 7280kB in 0s (7574kB/s)
Preconfiguring packages ...
(Reading database ... 22982 files and directories currently installed.)
Preparing to replace libc6 2.7-18 (using .../archives/libc6_2.9-3_i386.deb) ...
Checking for services that may need to be restarted...
Checking init scripts...
touch: setting times of `/etc/ld.so.nohwcap': Bad address
dpkg: error processing /var/cache/apt/archives/libc6_2.9-3_i386.deb (--unpack):
 subprocess pre-installation script returned error exit status 1
Errors were encountered while processing:
 /var/cache/apt/archives/libc6_2.9-3_i386.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)

openIT

Re: Probleme bei upgrade (unstable)

Beitrag von openIT » 24.02.2009 11:33:09

Hab leider keine Ahnung wie man das beheben kann. Da du sid nutzt kannst du vielleicht mal im sidux IRC vorbeischauen (irc.oftc.net #sidux) und da die Fehlermeldung posten(bei http://paste.debian.net/ hochladen und den link posten). Die haben in der Regel schnell ne Lösung parat.

dbs
Beiträge: 8
Registriert: 30.09.2008 09:48:31

Re: Probleme bei upgrade (unstable)

Beitrag von dbs » 24.02.2009 11:39:54

Trotzdem danke für Deine Hilfe, werde mich später mal in den IRC begeben :)

Gruß dbs

Danielx
Beiträge: 6419
Registriert: 14.08.2003 17:52:23

Re: Probleme bei upgrade (unstable)

Beitrag von Danielx » 24.02.2009 14:02:41

dbs hat geschrieben:

Code: Alles auswählen

touch: setting times of `/etc/ld.so.nohwcap': Bad address
Also schlägt der Befehl "touch /etc/ld.so.nohwcap" fehl.

Was sagt denn bei dir:

Code: Alles auswählen

ls -la /etc/ld.so.nohwcap
Falls die Datei nicht existiert, lässt sich diese manuell anlegen?

Code: Alles auswählen

touch /etc/ld.so.nohwcap
Wenn nein, was sagt:

Code: Alles auswählen

strace touch /etc/ld.so.nohwcap
Gruß,
Daniel

dbs
Beiträge: 8
Registriert: 30.09.2008 09:48:31

Re: Probleme bei upgrade (unstable)

Beitrag von dbs » 27.02.2009 09:07:49

Hi Daniel,

anbei der Output.

Code: Alles auswählen

test-system:/home/tester# ls -la /etc/ld.so.nohwcap
-rw-r--r-- 1 root root 0 2009-02-23 17:01 /etc/ld.so.nohwcap

Code: Alles auswählen

test-system:/home/tester# strace touch /etc/ld.so.nohwcap
bash: strace: command not found
test-system:/home/tester# apt-get install strace
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following NEW packages will be installed:
  strace
0 upgraded, 1 newly installed, 0 to remove and 23 not upgraded.
Need to get 160kB of archives.
After this operation, 287kB of additional disk space will be used.
Get:1 http://ftp.de.debian.org unstable/main strace 4.5.17+cvs080723-2 [160kB]
Fetched 160kB in 0s (505kB/s)
Selecting previously deselected package strace.
(Reading database ... 22982 files and directories currently installed.)
Unpacking strace (from .../strace_4.5.17+cvs080723-2_i386.deb) ...
Processing triggers for man-db ...
Setting up strace (4.5.17+cvs080723-2) ...

Code: Alles auswählen

test-system:/home/tester# strace touch /etc/ld.so.nohwcap
execve("/usr/bin/touch", ["touch", "/etc/ld.so.nohwcap"], [/* 17 vars */]) = 0
brk(0)                                  = 0x8556000
uname({sys="Linux", node="blabla.net", ...}) = 0
access("/etc/ld.so.nohwcap", F_OK)      = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7f43000
access("/etc/ld.so.preload", R_OK)      = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY)      = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=20332, ...}) = 0
mmap2(NULL, 20332, PROT_READ, MAP_PRIVATE, 3, 0) = 0xb7f3e000
close(3)                                = 0
access("/etc/ld.so.nohwcap", F_OK)      = 0
open("/lib/librt.so.1", O_RDONLY)       = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\240\30\0\0004\0\0\0\240"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=30624, ...}) = 0
mmap2(NULL, 33336, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x1f0000
mmap2(0x1f7000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x6) = 0x1f7000
close(3)                                = 0
access("/etc/ld.so.nohwcap", F_OK)      = 0
open("/lib/libc.so.6", O_RDONLY)        = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\260e\1\0004\0\0\0t"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=1294572, ...}) = 0
mmap2(NULL, 1300080, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xa63000
mmap2(0xb9b000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x138) = 0xb9b000
mmap2(0xb9e000, 9840, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb9e000
close(3)                                = 0
access("/etc/ld.so.nohwcap", F_OK)      = 0
open("/lib/libpthread.so.0", O_RDONLY)  = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\220G\0\0004\0\0\0\330"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=112012, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7f3d000
mmap2(NULL, 94688, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x6c5000
mmap2(0x6d9000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x13) = 0x6d9000
mmap2(0x6db000, 4576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x6db000
close(3)                                = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7f3c000
set_thread_area({entry_number:-1 -> 6, base_addr:0xb7f3c6b0, limit:1048575, seg_32bit:1, contents:0, read_exec_only:0, limit_in_pages:1, seg_not_present:0, useable:1}) = 0
mprotect(0xb9b000, 4096, PROT_READ)     = 0
munmap(0xb7f3e000, 20332)               = 0
set_tid_address(0xb7f3c6f8)             = 12241
set_robust_list(0xb7f3c700, 0xc)        = 0
futex(0xbfec3950, FUTEX_WAKE_PRIVATE, 1) = -1 ENOSYS (Function not implemented)
rt_sigaction(SIGRTMIN, {0x6c9280, [], SA_RESTORER|SA_SIGINFO, 0x6d2930}, NULL, 8) = 0
rt_sigaction(SIGRT_1, {0x6c9680, [], SA_RESTORER|SA_RESTART|SA_SIGINFO, 0x6d2930}, NULL, 8) = 0
rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0
getrlimit(RLIMIT_STACK, {rlim_cur=10240*1024, rlim_max=RLIM_INFINITY}) = 0
uname({sys="Linux", node="blabla.net", ...}) = 0
brk(0)                                  = 0x8556000
brk(0x8577000)                          = 0x8577000
open("/usr/lib/locale/locale-archive", O_RDONLY|O_LARGEFILE) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=2461856, ...}) = 0
mmap2(NULL, 2097152, PROT_READ, MAP_PRIVATE, 3, 0) = 0xb7d3c000
mmap2(NULL, 929792, PROT_READ, MAP_PRIVATE, 3, 0x177) = 0xb7c59000
close(3)                                = 0
open("/etc/ld.so.nohwcap", O_WRONLY|O_CREAT|O_NOCTTY|O_NONBLOCK|O_LARGEFILE, 0666) = 3
dup2(3, 0)                              = 0
close(3)                                = 0
utimensat(0, NULL, NULL, 0)             = -1 EFAULT (Bad address)
close(0)                                = 0
open("/usr/share/locale/locale.alias", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/share/locale/en_US.UTF-8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/share/locale/en_US.utf8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/share/locale/en_US/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/share/locale/en.UTF-8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/share/locale/en.utf8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/share/locale/en/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
write(2, "touch: "..., 7touch: )               = 7
write(2, "setting times of `/etc/ld.so.nohw"..., 37setting times of `/etc/ld.so.nohwcap') = 37
open("/usr/share/locale/en_US.UTF-8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/share/locale/en_US.utf8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/share/locale/en_US/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/share/locale/en.UTF-8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/share/locale/en.utf8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/share/locale/en/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
write(2, ": Bad address"..., 13: Bad address)        = 13
write(2, "\n"..., 1
)                    = 1
close(1)                                = 0
close(2)                                = 0
exit_group(1)                           = ?

Danielx
Beiträge: 6419
Registriert: 14.08.2003 17:52:23

Re: Probleme bei upgrade (unstable)

Beitrag von Danielx » 28.02.2009 01:44:03

dbs hat geschrieben:System ist Debian 4.0 (unstable).
Was soll das denn bedeuten?

Welche Version setzt du ein und auf welche Version willst du aktualisieren?
dbs hat geschrieben:

Code: Alles auswählen

utimensat(0, NULL, NULL, 0)             = -1 EFAULT (Bad address)
Sieh mal hier:
http://bugs.debian.org/cgi-bin/bugrepor ... =276500#45

Gruß,
Daniel

Benutzeravatar
habakug
Moderator
Beiträge: 4314
Registriert: 23.10.2004 13:08:41
Lizenz eigener Beiträge: MIT Lizenz

Re: Probleme bei upgrade (unstable)

Beitrag von habakug » 28.02.2009 02:01:23

Hallo!

Ja, das ist schon kurios. Da upgradet jemand von Lenny/Sid (2.7-18) zu experimental (2.9-3). Und glaubt es sei Debian 4.0.

Code: Alles auswählen

Preparing to replace libc6 2.7-18 (using .../archives/libc6_2.9-3_i386.deb) ..
Wer sich austoben möchte, findet hier [1] Futter (2.9-4 amd64).

Gruß, habakug

[1] http://http.us.debian.org/debian/pool/main/g/glibc/
( # = root | $ = user | !! = mod ) (Vor der PN) (Debianforum-Wiki) (NoPaste)

Antworten