[Abbruch] schwarzer Bildschirm und Mauszeiger nach 1. Start

Du kommst mit der Installation nicht voran oder willst noch was nachfragen? Schau auch in den "Tipps und Tricks"-Bereich.
Antworten
NielsH
Beiträge: 29
Registriert: 22.11.2013 12:15:26

[Abbruch] schwarzer Bildschirm und Mauszeiger nach 1. Start

Beitrag von NielsH » 15.06.2014 12:18:56

Hallo zusammen,

ich habe auf einem Acer Power M6 die Netinstall 7.5.0-amd64 durchgeführt. Beim Boot erscheint kurz eine völlig verschobene und fehlfarbige grafische Anzeige (Boot-Messages mit Debian-Logo oben rechts), bevor der Bildschirm schwarz wird und ich nur noch einen Mauszeiger habe. Der Mauszeiger lässt sich bewegen, jedoch funktioniert keine Strg+Alt+FX Taste.
Die Grafikkarte soll eine Nvidia C51G sein..
In der XOrg.0.log finde ich nur eine Fehlermeldung (hier mal mit dem mir darunter und darüber relevant erscheinendem):

Code: Alles auswählen

[    25.062] (II) LoadModule: "nouveau"
[    25.063] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    25.090] (II) Module nouveau: vendor="X.Org Foundation"
[    25.091] 	compiled for 1.12.4, module version = 1.0.1
[    25.091] 	Module class: X.Org Video Driver
[    25.091] 	ABI class: X.Org Video Driver, version 12.1
[    25.091] (II) LoadModule: "nv"
[    25.092] (WW) Warning, couldn't open module nv
[    25.092] (II) UnloadModule: "nv"
[    25.092] (II) Unloading nv
[    25.093] (EE) Failed to load module "nv" (module does not exist, 0)
[    25.093] (II) LoadModule: "vesa"
[    25.093] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    25.094] (II) Module vesa: vendor="X.Org Foundation"
[    25.094] 	compiled for 1.12.1, module version = 2.3.1
[    25.094] 	Module class: X.Org Video Driver
[    25.094] 	ABI class: X.Org Video Driver, version 12.0
[    25.094] (II) LoadModule: "fbdev"
[    25.094] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    25.095] (II) Module fbdev: vendor="X.Org Foundation"
[    25.095] 	compiled for 1.12.1, module version = 0.4.2
[    25.095] 	ABI class: X.Org Video Driver, version 12.0
[    25.096] (II) NOUVEAU driver Date:   Fri Jul 6 16:23:50 2012 +1000
[    25.096] (II) NOUVEAU driver for NVIDIA chipset families :
[    25.096] 	RIVA TNT        (NV04)
[    25.096] 	RIVA TNT2       (NV05)
[    25.096] 	GeForce 256     (NV10)
[    25.096] 	GeForce 2       (NV11, NV15)
[    25.096] 	GeForce 4MX     (NV17, NV18)
[    25.096] 	GeForce 3       (NV20)
[    25.096] 	GeForce 4Ti     (NV25, NV28)
[    25.096] 	GeForce FX      (NV3x)
[    25.097] 	GeForce 6       (NV4x)
[    25.097] 	GeForce 7       (G7x)
[    25.097] 	GeForce 8       (G8x)
[    25.097] 	GeForce GTX 200 (NVA0)
[    25.097] 	GeForce GTX 400 (NVC0)
[    25.097] (II) VESA: driver for VESA chipsets: vesa
[    25.097] (II) FBDEV: driver for framebuffer: fbdev
[    25.097] (++) using VT number 7
Also meine Grafikkarte taucht da auch nicht wirklich in der Liste auf?....
Und hier nochmal die Load-Messages vom Treiber:

Code: Alles auswählen

[    25.123] (II) [drm] DRM interface version 1.4
[    25.124] (II) [drm] DRM open master succeeded.
[    25.124] (--) NOUVEAU(0): Chipset: "NVIDIA NV4e"
[    25.124] (II) NOUVEAU(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    25.124] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[    25.124] (==) NOUVEAU(0): RGB weight 888
[    25.124] (==) NOUVEAU(0): Default visual is TrueColor
[    25.124] (==) NOUVEAU(0): Using HW cursor
[    25.124] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[    25.124] (==) NOUVEAU(0): Page flipping enabled
[    25.124] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[    25.167] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[    25.210] (II) NOUVEAU(0): EDID for output VGA-1
[    25.210] (II) NOUVEAU(0): Manufacturer: PTS  Model: 76d  Serial#: 189529
[    25.210] (II) NOUVEAU(0): Year: 2005  Week: 53
[    25.210] (II) NOUVEAU(0): EDID Version: 1.3
[    25.210] (II) NOUVEAU(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[    25.210] (II) NOUVEAU(0): Sync:  Separate
[    25.210] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 38  vert.: 30
[    25.210] (II) NOUVEAU(0): Gamma: 2.50
[    25.210] (II) NOUVEAU(0): DPMS capabilities: Off; RGB/Color Display
[    25.210] (II) NOUVEAU(0): First detailed timing not preferred mode in violation of standard!
[    25.210] (II) NOUVEAU(0): redX: 0.646 redY: 0.357   greenX: 0.278 greenY: 0.612
[    25.210] (II) NOUVEAU(0): blueX: 0.146 blueY: 0.118   whiteX: 0.310 whiteY: 0.329
[    25.210] (II) NOUVEAU(0): Supported established timings:
[    25.210] (II) NOUVEAU(0): 720x400@70Hz
[    25.210] (II) NOUVEAU(0): 640x480@60Hz
[    25.210] (II) NOUVEAU(0): 640x480@67Hz
[    25.210] (II) NOUVEAU(0): 640x480@72Hz
[    25.210] (II) NOUVEAU(0): 640x480@75Hz
[    25.210] (II) NOUVEAU(0): 800x600@56Hz
[    25.210] (II) NOUVEAU(0): 800x600@60Hz
[    25.210] (II) NOUVEAU(0): 800x600@72Hz
[    25.210] (II) NOUVEAU(0): 800x600@75Hz
[    25.210] (II) NOUVEAU(0): 832x624@75Hz
[    25.210] (II) NOUVEAU(0): 1024x768@60Hz
[    25.210] (II) NOUVEAU(0): 1024x768@70Hz
[    25.210] (II) NOUVEAU(0): 1024x768@75Hz
[    25.210] (II) NOUVEAU(0): 1280x1024@75Hz
[    25.210] (II) NOUVEAU(0): Manufacturer's mask: 0
[    25.210] (II) NOUVEAU(0): Supported standard timings:
[    25.211] (II) NOUVEAU(0): #3: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    25.211] (II) NOUVEAU(0): Supported detailed timing:
[    25.211] (II) NOUVEAU(0): clock: 108.0 MHz   Image Size:  376 x 301 mm
[    25.211] (II) NOUVEAU(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[    25.211] (II) NOUVEAU(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[    25.211] (II) NOUVEAU(0): Supported detailed timing:
[    25.211] (II) NOUVEAU(0): clock: 78.8 MHz   Image Size:  376 x 301 mm
[    25.211] (II) NOUVEAU(0): h_active: 1024  h_sync: 1040  h_sync_end 1136 h_blank_end 1312 h_border: 0
[    25.211] (II) NOUVEAU(0): v_active: 768  v_sync: 769  v_sync_end 772 v_blanking: 800 v_border: 0
[    25.211] (II) NOUVEAU(0): Ranges: V min: 60 V max: 75 Hz, H min: 30 H max: 80 kHz, PixClock max 145 MHz
[    25.211] (II) NOUVEAU(0): Serial No: F8WQ5C0189529
[    25.211] (II) NOUVEAU(0): EDID (in hex):
[    25.211] (II) NOUVEAU(0): 	00ffffffffffff0042936d0759e40200
[    25.211] (II) NOUVEAU(0): 	350f010308261e96286755a55b479c25
[    25.211] (II) NOUVEAU(0): 	1e4f54bfef0001010101010181800101
[    25.211] (II) NOUVEAU(0): 	010101010101302a009851002a403070
[    25.211] (II) NOUVEAU(0): 	1300782d1100001ec31e002041002030
[    25.211] (II) NOUVEAU(0): 	10601300782d11000000000000fd003c
[    25.211] (II) NOUVEAU(0): 	4b1e500e000a202020202020000000ff
[    25.211] (II) NOUVEAU(0): 	00463857513543303138393532390012
[    25.211] (II) NOUVEAU(0): EDID vendor "PTS", prod id 1901
[    25.211] (II) NOUVEAU(0): DDCModeFromDetailedTiming: 1024x768 Warning: We only handle separate sync.
[    25.212] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[    25.212] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[    25.212] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    25.212] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    25.212] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 -hsync -vsync (60.0 kHz e)
[    25.212] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    25.212] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    25.212] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    25.212] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    25.212] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    25.212] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    25.212] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    25.212] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    25.212] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    25.212] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    25.212] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    25.212] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    25.212] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    25.212] (II) NOUVEAU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    25.212] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[    25.212] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    25.212] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    25.212] (II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[    25.212] (II) NOUVEAU(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 -hsync -vsync (60.0 kHz e)
[    25.213] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    25.213] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    25.213] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    25.213] (II) NOUVEAU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    25.213] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    25.213] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    25.213] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    25.213] (II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz e)
[    25.213] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    25.213] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    25.213] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    25.213] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    25.213] (II) NOUVEAU(0): Output VGA-1 connected
[    25.213] (II) NOUVEAU(0): Using exact sizes for initial modes
[    25.213] (II) NOUVEAU(0): Output VGA-1 using initial mode 1280x1024
[    25.213] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    25.213] (--) NOUVEAU(0): Virtual size is 1280x1024 (pitch 0)
[    25.213] (**) NOUVEAU(0):  Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[    25.213] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    25.213] (**) NOUVEAU(0):  Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[    25.213] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    25.213] (**) NOUVEAU(0):  Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[    25.213] (II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[    25.213] (**) NOUVEAU(0):  Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
[    25.214] (II) NOUVEAU(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 -hsync -vsync (60.0 kHz e)
[    25.214] (**) NOUVEAU(0):  Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[    25.214] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    25.214] (**) NOUVEAU(0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[    25.214] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    25.214] (**) NOUVEAU(0):  Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[    25.214] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    25.214] (**) NOUVEAU(0):  Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[    25.214] (II) NOUVEAU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    25.214] (**) NOUVEAU(0):  Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[    25.214] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    25.214] (**) NOUVEAU(0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[    25.214] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    25.214] (**) NOUVEAU(0):  Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[    25.214] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    25.214] (**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[    25.214] (II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz e)
[    25.214] (**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[    25.214] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    25.214] (**) NOUVEAU(0):  Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[    25.214] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    25.214] (**) NOUVEAU(0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[    25.214] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    25.214] (**) NOUVEAU(0):  Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[    25.214] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    25.214] (**) NOUVEAU(0): Display dimensions: (380, 300) mm
[    25.214] (**) NOUVEAU(0): DPI set to (85, 86)
ratlose Grüße
Niels
Zuletzt geändert von NielsH am 20.06.2014 20:10:54, insgesamt 1-mal geändert.

Benutzeravatar
gnude
Beiträge: 1569
Registriert: 14.09.2009 22:05:28
Kontaktdaten:

Re: schwarzer Bildschirm und Mauszeiger nach 1. Start

Beitrag von gnude » 17.06.2014 08:14:27

Übergebe dem Kernel beim Booten doch mal den Parameter:
vga=791
vieleicht kannst du dann eine Fehlermeldung sehen.
Ich hatte es auch das keine Textmodus-Ausgaben mehr sichtbar waren.

NielsH
Beiträge: 29
Registriert: 22.11.2013 12:15:26

Re: schwarzer Bildschirm und Mauszeiger nach 1. Start

Beitrag von NielsH » 18.06.2014 07:59:25

Danke für den Tipp, das hat auch nichts gebracht. Aber nachdem ich mit etwas Hirn beglückt wurde, fiel mir wieder ein, dass ich ja SSH mit installiert habe. Und mit SSH komme ich auf die Kiste rauf. Also der Kasten steht nicht komplett, es hängt wohl wirklich nur die Grafik. Das untermauert sich dadurch, dass das Bild so bleibt, wenn ich via SSH ein init 0 mache, also keine shutdown-Meldungen kommen.
Hier mal die letzten Einträge aus der /var/log/messages:

Code: Alles auswählen

Jun 18 07:41:58 debian-mika kernel: [   20.438517] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Jun 18 07:41:58 debian-mika kernel: [   20.438525] Bluetooth: BNEP filters: protocol multicast
Jun 18 07:41:58 debian-mika kernel: [   20.753233] lp0: using parport0 (interrupt-driven).
Jun 18 07:41:58 debian-mika kernel: [   20.772424] ppdev: user-space parallel port driver
Jun 18 07:42:02 debian-mika kernel: [   24.608460] [drm] nouveau 0000:00:05.0: PFIFO_DMA_PUSHER - Ch 0 Get 0xf000e818 Put 0x00001080 State 0xc0000000 (err: MEM_FAULT) Push 0x00000000
Jun 18 07:42:02 debian-mika kernel: [   24.609099] [drm] nouveau 0000:00:05.0: PFIFO_DMA_PUSHER - Ch 0 Get 0xf000e818 Put 0x00001080 State 0xc0000000 (err: MEM_FAULT) Push 0x00000000
Jun 18 07:42:02 debian-mika kernel: [   24.609597] [drm] nouveau 0000:00:05.0: PFIFO_DMA_PUSHER - Ch 0 Get 0xf000e818 Put 0x00001080 State 0xc0000000 (err: MEM_FAULT) Push 0x00000000
Jun 18 07:42:02 debian-mika kernel: [   24.659289] composite sync not supported
Jun 18 07:42:02 debian-mika kernel: [   24.701978] composite sync not supported
Jun 18 07:42:04 debian-mika kernel: [   26.741969] composite sync not supported
Jun 18 07:42:09 debian-mika kernel: [   31.150149] composite sync not supported
Jun 18 07:42:09 debian-mika kernel: [   31.195579] composite sync not supported
Jun 18 07:42:10 debian-mika kernel: [   32.938351] [drm] nouveau 0000:00:05.0: PFIFO_DMA_PUSHER - Ch 0 Get 0xf000e818 Put 0x00010f94 State 0xc0000000 (err: MEM_FAULT) Push 0x00000000
Jun 18 07:42:10 debian-mika kernel: [   32.940535] [drm] nouveau 0000:00:05.0: PFIFO_DMA_PUSHER - Ch 0 Get 0xf000e818 Put 0x0000f140 State 0xc0000000 (err: MEM_FAULT) Push 0x00000000
Jun 18 07:42:13 debian-mika rsyslogd-2177: imuxsock begins to drop messages from pid 3164 due to rate-limiting
Jun 18 07:42:16 debian-mika rsyslogd-2177: imuxsock lost 41 messages from pid 3164 due to rate-limiting
Jun 18 07:42:17 debian-mika pulseaudio[3351]: [pulseaudio] sink.c: Default and alternate sample rates are the same.
Jun 18 07:42:17 debian-mika pulseaudio[3351]: [pulseaudio] source.c: Default and alternate sample rates are the same.
Darauf hin habe ich mal folgendes gemacht:

Code: Alles auswählen

root@debian-mika:/var/log# cat /var/log/messages |grep err:
Jun 15 11:37:31 debian-mika kernel: [    8.835364] [drm] nouveau 0000:00:05.0: PFIFO_DMA_PUSHER - Ch 0 Get 0xf000e818 Put 0x00001cb8 State 0xc0000000 (err: MEM_FAULT) Push 0x00000000
Jun 15 11:37:31 debian-mika kernel: [    8.835573] [drm] nouveau 0000:00:05.0: PFIFO_DMA_PUSHER - Ch 0 Get 0xf000e818 Put 0x00001284 State 0xc0000000 (err: MEM_FAULT) Push 0x00000000
Jun 15 11:37:31 debian-mika kernel: [    8.836416] [drm] nouveau 0000:00:05.0: PFIFO_DMA_PUSHER - Ch 0 Get 0xf000e818 Put 0x00001ebc State 0xc0000000 (err: MEM_FAULT) Push 0x00000000
Jun 15 11:37:31 debian-mika kernel: [    8.836635] [drm] nouveau 0000:00:05.0: PFIFO_DMA_PUSHER - Ch 0 Get 0xf000e818 Put 0x00001ebc State 0xc0000000 (err: MEM_FAULT) Push 0x00000000
Jun 15 11:37:31 debian-mika kernel: [    8.836855] [drm] nouveau 0000:00:05.0: PFIFO_DMA_PUSHER - Ch 0 Get 0xf000e818 Put 0x00001ebc State 0xc0000000 (err: MEM_FAULT) Push 0x00000000
Jun 15 11:37:31 debian-mika kernel: [   18.219380] [drm] nouveau 0000:00:05.0: PFIFO_DMA_PUSHER - Ch 0 Get 0xf000e818 Put 0x000014d0 State 0xc0000000 (err: MEM_FAULT) Push 0x00000000
Jun 15 11:37:31 debian-mika kernel: [   18.220042] [drm] nouveau 0000:00:05.0: PFIFO_DMA_PUSHER - Ch 0 Get 0xf000e818 Put 0x00001080 State 0xc0000000 (err: MEM_FAULT) Push 0x00000000
Jun 15 11:37:31 debian-mika kernel: [   18.220567] [drm] nouveau 0000:00:05.0: PFIFO_DMA_PUSHER - Ch 0 Get 0xf000e818 Put 0x00001080 State 0xc0000000 (err: MEM_FAULT) Push 0x00000000
Jun 15 11:37:37 debian-mika kernel: [   25.099121] [drm] nouveau 0000:00:05.0: PFIFO_DMA_PUSHER - Ch 0 Get 0xf000e818 Put 0x00001080 State 0xc0000000 (err: MEM_FAULT) Push 0x00000000
Jun 15 11:37:37 debian-mika kernel: [   25.099725] [drm] nouveau 0000:00:05.0: PFIFO_DMA_PUSHER - Ch 0 Get 0xf000e818 Put 0x0000168c State 0xc0000000 (err: MEM_FAULT) Push 0x00000000
Jun 15 11:37:37 debian-mika kernel: [   25.100314] [drm] nouveau 0000:00:05.0: PFIFO_DMA_PUSHER - Ch 0 Get 0xf000e818 Put 0x0000168c State 0xc0000000 (err: MEM_FAULT) Push 0x00000000
Jun 18 07:41:56 debian-mika kernel: [    9.139708] [drm] nouveau 0000:00:05.0: PFIFO_DMA_PUSHER - Ch 0 Get 0xf000e818 Put 0x00001284 State 0xc0000000 (err: MEM_FAULT) Push 0x00000000
Jun 18 07:41:56 debian-mika kernel: [    9.140203] [drm] nouveau 0000:00:05.0: PFIFO_DMA_PUSHER - Ch 0 Get 0xf000e818 Put 0x00001284 State 0xc0000000 (err: MEM_FAULT) Push 0x00000000
Jun 18 07:41:56 debian-mika kernel: [    9.141366] [drm] nouveau 0000:00:05.0: PFIFO_DMA_PUSHER - Ch 0 Get 0xf000e818 Put 0x00001ebc State 0xc0000000 (err: MEM_FAULT) Push 0x00000000
Jun 18 07:41:56 debian-mika kernel: [    9.141846] [drm] nouveau 0000:00:05.0: PFIFO_DMA_PUSHER - Ch 0 Get 0xf000e818 Put 0x00001488 State 0xc0000000 (err: MEM_FAULT) Push 0x00000000
Jun 18 07:41:56 debian-mika kernel: [    9.142335] [drm] nouveau 0000:00:05.0: PFIFO_DMA_PUSHER - Ch 0 Get 0xf000e818 Put 0x00001488 State 0xc0000000 (err: MEM_FAULT) Push 0x00000000
Jun 18 07:41:56 debian-mika kernel: [   17.255616] [drm] nouveau 0000:00:05.0: PFIFO_DMA_PUSHER - Ch 0 Get 0xf000e818 Put 0x000014d0 State 0xc0000000 (err: MEM_FAULT) Push 0x00000000
Jun 18 07:41:56 debian-mika kernel: [   17.256286] [drm] nouveau 0000:00:05.0: PFIFO_DMA_PUSHER - Ch 0 Get 0xf000e818 Put 0x00001890 State 0xc0000000 (err: MEM_FAULT) Push 0x00000000
Jun 18 07:41:56 debian-mika kernel: [   17.256789] [drm] nouveau 0000:00:05.0: PFIFO_DMA_PUSHER - Ch 0 Get 0xf000e818 Put 0x00001890 State 0xc0000000 (err: MEM_FAULT) Push 0x00000000
Jun 18 07:42:02 debian-mika kernel: [   24.608460] [drm] nouveau 0000:00:05.0: PFIFO_DMA_PUSHER - Ch 0 Get 0xf000e818 Put 0x00001080 State 0xc0000000 (err: MEM_FAULT) Push 0x00000000
Jun 18 07:42:02 debian-mika kernel: [   24.609099] [drm] nouveau 0000:00:05.0: PFIFO_DMA_PUSHER - Ch 0 Get 0xf000e818 Put 0x00001080 State 0xc0000000 (err: MEM_FAULT) Push 0x00000000
Jun 18 07:42:02 debian-mika kernel: [   24.609597] [drm] nouveau 0000:00:05.0: PFIFO_DMA_PUSHER - Ch 0 Get 0xf000e818 Put 0x00001080 State 0xc0000000 (err: MEM_FAULT) Push 0x00000000
Jun 18 07:42:10 debian-mika kernel: [   32.938351] [drm] nouveau 0000:00:05.0: PFIFO_DMA_PUSHER - Ch 0 Get 0xf000e818 Put 0x00010f94 State 0xc0000000 (err: MEM_FAULT) Push 0x00000000
Jun 18 07:42:10 debian-mika kernel: [   32.940535] [drm] nouveau 0000:00:05.0: PFIFO_DMA_PUSHER - Ch 0 Get 0xf000e818 Put 0x0000f140 State 0xc0000000 (err: MEM_FAULT) Push 0x00000000

Code: Alles auswählen

root@debian-mika:/var/log# cat /var/log/messages |grep fail
Jun 15 11:37:31 debian-mika kernel: [    0.219544]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
Jun 15 11:37:31 debian-mika kernel: [    2.020026] pci 0000:00:0b.1: EHCI: BIOS handoff failed (BIOS bug?) 01010001
Jun 18 07:41:56 debian-mika kernel: [    0.223273]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
Jun 18 07:41:56 debian-mika kernel: [    2.020026] pci 0000:00:0b.1: EHCI: BIOS handoff failed (BIOS bug?) 01010001
abgefragte Grüße
Niels

NielsH
Beiträge: 29
Registriert: 22.11.2013 12:15:26

Re: schwarzer Bildschirm und Mauszeiger nach 1. Start

Beitrag von NielsH » 19.06.2014 18:30:50

Nun habe ich etwas gefunden, was mein Problem lösen sollte: https://packages.debian.org/wheezy/nvidia-glx Meine GraKa soll eine GeForce 6100 sein.
Doch weit gefehlt. Ich habe meine sources.list um den Verweis auf die non-free Quelle ergänzt

Code: Alles auswählen

deb http://ftp.de.debian.org/debian wheezy main non-free
Und nach einem 'apt-get update' wolle ich loslegen:

Code: Alles auswählen

t# apt-get install nvidia-glx
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
Einige Pakete konnten nicht installiert werden. Das kann bedeuten, dass
Sie eine unmögliche Situation angefordert haben oder, wenn Sie die
Unstable-Distribution verwenden, dass einige erforderliche Pakete noch
nicht erstellt wurden oder Incoming noch nicht verlassen haben.
Die folgenden Informationen helfen Ihnen vielleicht, die Situation zu lösen:

Die folgenden Pakete haben unerfüllte Abhängigkeiten:
 nvidia-glx : Hängt ab von: libgl1-nvidia-glx (= 304.117-1) soll aber nicht installiert werden
              Hängt ab von: libxvmcnvidia1 (= 304.117-1) soll aber nicht installiert werden
              Hängt ab von: xserver-xorg-video-nvidia (= 304.117-1) soll aber nicht installiert werden
              Hängt ab von: nvidia-vdpau-driver (= 304.117-1) soll aber nicht installiert werden
              Hängt ab von: nvidia-alternative (= 304.117-1) soll aber nicht installiert werden
              Hängt ab von: nvidia-kernel-dkms (= 304.117-1) oder
                             nvidia-kernel-304.117
              Hängt ab von: nvidia-support ist aber nicht installierbar
              Hängt ab von (vorher): nvidia-installer-cleanup ist aber nicht installierbar
              Empfiehlt: nvidia-settings ist aber nicht installierbar
              Empfiehlt: libgl1-nvidia-glx-i386 ist aber nicht installierbar
E: Probleme können nicht korrigiert werden, Sie haben zurückgehaltene defekte Pakete.
Und schon ist meine Freude über meine Rechercheergebnisse wieder verflogen :(

nicht installierbare Grüße
Niels

Benutzeravatar
Patsche
Beiträge: 3263
Registriert: 21.06.2013 01:47:54
Lizenz eigener Beiträge: MIT Lizenz
Wohnort: /home/10001101001

Re: schwarzer Bildschirm und Mauszeiger nach 1. Start

Beitrag von Patsche » 19.06.2014 19:01:55

Hast du hinterher ein

Code: Alles auswählen

apt-get update
gemacht?

NielsH
Beiträge: 29
Registriert: 22.11.2013 12:15:26

Re: schwarzer Bildschirm und Mauszeiger nach 1. Start

Beitrag von NielsH » 19.06.2014 23:27:35

Jo, apt-get update wurde gemacht.
Danach habe ich noch dies gefunden und diesen Abschnitt durchgearbeitet. Das lief auch durch. Nun weiß ich aber noch nicht genau, wo ich noch was konfigurieren muss. Was muss jetzt genau in der /etc/X11/xorg.conf.d/20-nvidia.conf als GPU drin stehen? Muss ich auf die Konfig noch verweisen? Eine Xorg.conf habe ich nicht - aber nach meinen Recherchen ist das auch ok so!?

langsam vorantastende Grüße
Niels

NielsH
Beiträge: 29
Registriert: 22.11.2013 12:15:26

Re: [Abbruch] schwarzer Bildschirm und Mauszeiger nach 1. St

Beitrag von NielsH » 20.06.2014 20:19:49

So, jetzt habe ich keinen Bock mehr. Ich wollte doch nur ein funktionierendes System für meinen Junior und nicht meinen Doktor in Linux machen. Ich arbeite mich ja gerne in die Problematik ein, aber wenn man nur auf der Stelle tritt, dann macht das keinen Spaß. So viel Zeit habe ich leider nicht.
Ich habe nun einen anderen PC genommen. Etwas neuer aber als defekt ausgesondert (hilfloses BIOS-Piepen). Nun, Einige schmeißen so etwas weg, Andere machen einen BIOS-Reset und gönnen dem Board eine neue Stützbatterie und haben einen Rechner :wink: Momentan will der noch nicht meine schönen 2GB-RAM-Riegel fressen, aber erst einmal Debian rauf und schauen, ob das hier unproblematisch läuft. Dann kümmere ich mich mal um ein BIOS-Update und evtl. starte ich erst einmal mit 2GB, vielleicht bekomme ich auch noch 3GB zusammen.
Ich werde ggf. berichten, wenn die Kiste auch zickt, aber ich bin da guter Dinge 8)

radikale Grüße
Niels

Antworten