Brother MFC5890CN unter Wheezy

[nsa]

Hallo Leute,
zunächst bin ich kein Anfänger. Als ruhig kurze und knappe Anweisungen.
Ich nutze seit ca. 2 Jahren einen Brother MFC5890CN Tintendrucker. Unter Ubuntu habe ich ihn problemlos in Gang bekommen mit den Brother-Treibern. Unter Debian Wheezy geht es nicht. Installation läuft völlig normal durch. Druckerwarteschlage/Class unter cups sieht ganz normal aus. Ich habe alles verglichen mit einer anderen Installation unter Ubuntu. Kann keinen Unterschied finden. Auch tut das Wheezy so, als ob es die Seite drucken würde (Statusmeldungen etc.), aber es tut sich am Drucker selbst nichts. Von Ubuntu aus geht der Druck einwandfrei. Was könnte das sein?

lpstat sagt:
auth-info-required=none copies=1 device-uri=dnssd://Brother%20MFC-5890CN._pdl-datastream._tcp.local/ finishings=3 job-hold-until=no-hold job-priority=50 job-sheets=none,none marker-change-time=1381298327 marker-colors=#000000,#FFFF00,#00FFFF,#FF00FF marker-levels=-1,-1,-1,-1 marker-names='Black\ Ink\ Cartridge,Yellow\ Ink\ Cartridge,Cyan\ Ink\ Cartridge,Magenta\ Ink\ Cartridge' marker-types=inkCartridge,inkCartridge,inkCartridge,inkCartridge number-up=1 printer-commands=AutoConfigure,Clean,PrintSelfTestPage printer-info=BrotherTintenpisser printer-is-accepting-jobs=true printer-is-shared=true printer-location=Hochlarmark printer-make-and-model='Brother MFC-5890CN CUPS v1.1' printer-state=3 printer-state-change-time=1381298327 printer-state-reasons=none printer-type=8564812 printer-uri-supported=ipp://localhost:631/printers/MFC5890CN

lpstatus -a sagt:
MFC5890CN accepting requests since Mi 09 Okt 2013 07:58:47 CEST
PDF accepting requests since Mo 30 Sep 2013 18:22:38 CEST

Freue mich über Hilfe

NSA

[KP97]

Du könntest in der /etc/cups/cupsd.conf den Loglevel auf debug setzen, evtl. siehst Du dann etwas mehr.
Hast Du den Drucker über das Webinterface von Cups eingerichtet? Das sollte man immer tun.

[nsa]

Ja. Die Einrichtung ging über das Web-Interface. Gute Idee mit dem Debug-Flag. Hier das Log wenn man cups startet:

I [10/Oct/2013:13:08:57 +0200] Listening to [v1.::1]:631 (IPv6)
I [10/Oct/2013:13:08:57 +0200] Listening to 127.0.0.1:631 (IPv4)
I [10/Oct/2013:13:08:57 +0200] Listening to /var/run/cups/cups.sock (Domain)
I [10/Oct/2013:13:08:57 +0200] Remote access is disabled.
D [10/Oct/2013:13:08:57 +0200] Added auto ServerAlias uriel
I [10/Oct/2013:13:08:57 +0200] Loaded configuration file "/etc/cups/cupsd.conf"
I [10/Oct/2013:13:08:57 +0200] Using default TempDir of /var/spool/cups/tmp...
I [10/Oct/2013:13:08:57 +0200] Configured for up to 100 clients.
I [10/Oct/2013:13:08:57 +0200] Allowing up to 100 client connections per host.
I [10/Oct/2013:13:08:57 +0200] Using policy "default" as the default.
I [10/Oct/2013:13:08:57 +0200] Full reload is required.
I [10/Oct/2013:13:08:57 +0200] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 39 types, 56 filters...
D [10/Oct/2013:13:08:57 +0200] Loading printer MFC5890CN...
D [10/Oct/2013:13:08:57 +0200] load_ppd: Loading /var/cache/cups/MFC5890CN.data...
D [10/Oct/2013:13:08:57 +0200] Calling DeleteDevice(cups-MFC5890CN)
D [10/Oct/2013:13:08:57 +0200] failed to DeleteDevice: org.freedesktop.DBus.Error.InvalidArgs:Type of message, `(s)', does not match expected type `(o)'
D [10/Oct/2013:13:08:57 +0200] Using profile id of MFC5890CN-Gray..
D [10/Oct/2013:13:08:57 +0200] Calling CreateProfile(MFC5890CN-Gray..,temp)
D [10/Oct/2013:13:08:57 +0200] created profile /org/freedesktop/ColorManager/profiles/MFC5890CN_Gray__
D [10/Oct/2013:13:08:57 +0200] Using profile id of MFC5890CN-RGB..
D [10/Oct/2013:13:08:57 +0200] Calling CreateProfile(MFC5890CN-RGB..,temp)
D [10/Oct/2013:13:08:57 +0200] created profile /org/freedesktop/ColorManager/profiles/MFC5890CN_RGB__
I [10/Oct/2013:13:08:57 +0200] Registering ICC color profiles for "MFC5890CN"
D [10/Oct/2013:13:08:57 +0200] Calling CreateDevice(cups-MFC5890CN,temp)
D [10/Oct/2013:13:08:57 +0200] created device /org/freedesktop/ColorManager/devices/cups_MFC5890CN
D [10/Oct/2013:13:08:57 +0200] Calling /org/freedesktop/ColorManager/devices/cups_MFC5890CN:AddProfile(/org/freedesktop/ColorManager/profiles/MFC5890CN_Gray__) [soft]
D [10/Oct/2013:13:08:57 +0200] Calling /org/freedesktop/ColorManager/devices/cups_MFC5890CN:AddProfile(/org/freedesktop/ColorManager/profiles/MFC5890CN_RGB__) [soft]
D [10/Oct/2013:13:08:57 +0200] cupsdRegisterPrinter(p=0x7f400d2ba120(MFC5890CN))
D [10/Oct/2013:13:08:57 +0200] load_ppd: Loading /var/cache/cups/MFC5890CN.data...
D [10/Oct/2013:13:08:57 +0200] Calling DeleteDevice(cups-MFC5890CN)
D [10/Oct/2013:13:08:57 +0200] failed to DeleteDevice: org.freedesktop.DBus.Error.InvalidArgs:Type of message, `(s)', does not match expected type `(o)'
D [10/Oct/2013:13:08:57 +0200] Using profile id of MFC5890CN-Gray..
D [10/Oct/2013:13:08:57 +0200] Calling CreateProfile(MFC5890CN-Gray..,temp)
W [10/Oct/2013:13:08:57 +0200] failed to CreateProfile: org.freedesktop.ColorManager.AlreadyExists:profile id 'MFC5890CN-Gray..' already exists
D [10/Oct/2013:13:08:57 +0200] Using profile id of MFC5890CN-RGB..
D [10/Oct/2013:13:08:57 +0200] Calling CreateProfile(MFC5890CN-RGB..,temp)
W [10/Oct/2013:13:08:57 +0200] failed to CreateProfile: org.freedesktop.ColorManager.AlreadyExists:profile id 'MFC5890CN-RGB..' already exists
I [10/Oct/2013:13:08:57 +0200] Registering ICC color profiles for "MFC5890CN"
D [10/Oct/2013:13:08:57 +0200] Calling CreateDevice(cups-MFC5890CN,temp)
W [10/Oct/2013:13:08:57 +0200] failed to CreateDevice: org.freedesktop.ColorManager.AlreadyExists:device id 'cups-MFC5890CN' already exists
D [10/Oct/2013:13:08:57 +0200] cupsdRegisterPrinter(p=0x7f400d2ba120(MFC5890CN))
D [10/Oct/2013:13:08:57 +0200] Loading printer PDF...
D [10/Oct/2013:13:08:57 +0200] load_ppd: Loading /var/cache/cups/PDF.data...
D [10/Oct/2013:13:08:57 +0200] Calling DeleteDevice(cups-PDF)
D [10/Oct/2013:13:08:57 +0200] failed to DeleteDevice: org.freedesktop.DBus.Error.InvalidArgs:Type of message, `(s)', does not match expected type `(o)'
D [10/Oct/2013:13:08:57 +0200] Using profile id of PDF-Gray..
D [10/Oct/2013:13:08:57 +0200] Calling CreateProfile(PDF-Gray..,temp)
D [10/Oct/2013:13:08:57 +0200] created profile /org/freedesktop/ColorManager/profiles/PDF_Gray__
D [10/Oct/2013:13:08:57 +0200] Using profile id of PDF-RGB..
D [10/Oct/2013:13:08:57 +0200] Calling CreateProfile(PDF-RGB..,temp)
D [10/Oct/2013:13:08:57 +0200] created profile /org/freedesktop/ColorManager/profiles/PDF_RGB__
I [10/Oct/2013:13:08:57 +0200] Registering ICC color profiles for "PDF"
D [10/Oct/2013:13:08:57 +0200] Calling CreateDevice(cups-PDF,temp)
D [10/Oct/2013:13:08:57 +0200] created device /org/freedesktop/ColorManager/devices/cups_PDF
D [10/Oct/2013:13:08:57 +0200] Calling /org/freedesktop/ColorManager/devices/cups_PDF:AddProfile(/org/freedesktop/ColorManager/profiles/PDF_Gray__) [soft]
D [10/Oct/2013:13:08:57 +0200] Calling /org/freedesktop/ColorManager/devices/cups_PDF:AddProfile(/org/freedesktop/ColorManager/profiles/PDF_RGB__) [soft]
D [10/Oct/2013:13:08:57 +0200] cupsdRegisterPrinter(p=0x7f400d2c13f0(PDF))
I [10/Oct/2013:13:08:57 +0200] Loading job cache file "/var/cache/cups/job.cache"...
D [10/Oct/2013:13:08:57 +0200] [Job 11] Loading from cache...
D [10/Oct/2013:13:08:57 +0200] [Job 12] Loading from cache...
D [10/Oct/2013:13:08:57 +0200] [Job 13] Loading from cache...
D [10/Oct/2013:13:08:57 +0200] [Job 14] Loading from cache...
D [10/Oct/2013:13:08:57 +0200] [Job 15] Loading from cache...
D [10/Oct/2013:13:08:57 +0200] [Job 16] Loading from cache...
D [10/Oct/2013:13:08:57 +0200] [Job 17] Loading from cache...
D [10/Oct/2013:13:08:57 +0200] [Job 18] Loading from cache...
D [10/Oct/2013:13:08:57 +0200] [Job 19] Loading from cache...
D [10/Oct/2013:13:08:57 +0200] [Job 20] Loading from cache...
D [10/Oct/2013:13:08:57 +0200] [Job 21] Loading from cache...
D [10/Oct/2013:13:08:57 +0200] [Job 22] Loading from cache...
D [10/Oct/2013:13:08:57 +0200] [Job 23] Loading from cache...
D [10/Oct/2013:13:08:57 +0200] [Job 24] Loading from cache...
D [10/Oct/2013:13:08:57 +0200] [Job 25] Loading from cache...
D [10/Oct/2013:13:08:57 +0200] [Job 26] Loading from cache...
D [10/Oct/2013:13:08:57 +0200] [Job 27] Loading from cache...
D [10/Oct/2013:13:08:57 +0200] [Job 28] Loading from cache...
D [10/Oct/2013:13:08:57 +0200] cupsdAddSubscription(mask=0, dest=(nil)(), job=(nil)(0), uri="(null)")
I [10/Oct/2013:13:08:57 +0200] Full reload complete.
D [10/Oct/2013:13:08:57 +0200] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
I [10/Oct/2013:13:08:57 +0200] Cleaning out old files in "/var/spool/cups/tmp"...
D [10/Oct/2013:13:08:57 +0200] Removed "/var/spool/cups/tmp/gs_TYn3bl"...
D [10/Oct/2013:13:08:57 +0200] Removed "/var/spool/cups/tmp/gs_5fMoEI"...
D [10/Oct/2013:13:08:57 +0200] Removed "/var/spool/cups/tmp/gs_F0tlcu"...
D [10/Oct/2013:13:08:57 +0200] Removed "/var/spool/cups/tmp/gs_OCTCFs"...
D [10/Oct/2013:13:08:57 +0200] Removed "/var/spool/cups/tmp/gs_ycigsk"...
D [10/Oct/2013:13:08:57 +0200] Removed "/var/spool/cups/tmp/gs_sXp9xG"...
D [10/Oct/2013:13:08:57 +0200] Removed "/var/spool/cups/tmp/gs_qd1SjK"...
D [10/Oct/2013:13:08:57 +0200] Removed "/var/spool/cups/tmp/gs_ZcuAM7"...
D [10/Oct/2013:13:08:57 +0200] Removed "/var/spool/cups/tmp/cups-dbus-notifier-lockfile"...
D [10/Oct/2013:13:08:57 +0200] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
I [10/Oct/2013:13:08:57 +0200] Cleaning out old files in "/var/cache/cups"...
I [10/Oct/2013:13:08:57 +0200] Listening to [v1.::1]:631 on fd 10...
I [10/Oct/2013:13:08:57 +0200] Listening to 127.0.0.1:631 on fd 11...
I [10/Oct/2013:13:08:57 +0200] Listening to /var/run/cups/cups.sock:631 on fd 12...
I [10/Oct/2013:13:08:57 +0200] Resuming new connection processing...
D [10/Oct/2013:13:08:57 +0200] Avahi client started
D [10/Oct/2013:13:08:57 +0200] cupsdRegisterPrinter(p=0x7f400d2ba120(MFC5890CN))
D [10/Oct/2013:13:08:57 +0200] cupsdRegisterPrinter(p=0x7f400d2c13f0(PDF))
D [10/Oct/2013:13:08:57 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [10/Oct/2013:13:08:57 +0200] Discarding unused server-started event...
D [10/Oct/2013:13:08:58 +0200] Report: clients=0
D [10/Oct/2013:13:08:58 +0200] Report: jobs=18
D [10/Oct/2013:13:08:58 +0200] Report: jobs-active=0
D [10/Oct/2013:13:08:58 +0200] Report: printers=2
D [10/Oct/2013:13:08:58 +0200] Report: printers-implicit=0
D [10/Oct/2013:13:08:58 +0200] Report: stringpool-string-count=1571
D [10/Oct/2013:13:08:58 +0200] Report: stringpool-alloc-bytes=12640
D [10/Oct/2013:13:08:58 +0200] Report: stringpool-total-bytes=31488




###########################################################
###########################################################
###########################################################
und hier das Listing wenn man etwas druckt über Libre Office
###########################################################
###########################################################
###########################################################

D [10/Oct/2013:13:11:24 +0200] cupsdAcceptClient: 17 from localhost (Domain)
D [10/Oct/2013:13:11:24 +0200] Report: clients=1
D [10/Oct/2013:13:11:24 +0200] Report: jobs=18
D [10/Oct/2013:13:11:24 +0200] Report: jobs-active=0
D [10/Oct/2013:13:11:24 +0200] Report: printers=2
D [10/Oct/2013:13:11:24 +0200] Report: printers-implicit=0
D [10/Oct/2013:13:11:24 +0200] Report: stringpool-string-count=1571
D [10/Oct/2013:13:11:24 +0200] Report: stringpool-alloc-bytes=12640
D [10/Oct/2013:13:11:24 +0200] Report: stringpool-total-bytes=31488
D [10/Oct/2013:13:11:24 +0200] cupsdReadClient: 17 POST /printers/MFC5890CN HTTP/1.1
D [10/Oct/2013:13:11:24 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2013:13:11:24 +0200] cupsdAuthorize: No authentication data provided.
D [10/Oct/2013:13:11:24 +0200] cupsdReadClient: 17 1.1 Create-Job 1
D [10/Oct/2013:13:11:24 +0200] Create-Job ipp://localhost:631/printers/MFC5890CN
D [10/Oct/2013:13:11:24 +0200] cupsdMarkDirty(----J-)
D [10/Oct/2013:13:11:24 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients"
D [10/Oct/2013:13:11:24 +0200] add_job: requesting-user-name="aengel"
D [10/Oct/2013:13:11:24 +0200] Adding default job-sheets values "none,none"...
I [10/Oct/2013:13:11:24 +0200] [Job 29] Adding start banner page "none".
D [10/Oct/2013:13:11:24 +0200] Notifier dbus started - PID = 5153
D [10/Oct/2013:13:11:24 +0200] cupsdMarkDirty(-----S)
D [10/Oct/2013:13:11:24 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
I [10/Oct/2013:13:11:24 +0200] [Job 29] Queued on "MFC5890CN" by "aengel".
D [10/Oct/2013:13:11:24 +0200] Returning IPP successful-ok for Create-Job (ipp://localhost:631/printers/MFC5890CN) from localhost
D [10/Oct/2013:13:11:24 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2013:13:11:24 +0200] cupsdReadClient: 17 POST /printers/MFC5890CN HTTP/1.1
D [10/Oct/2013:13:11:24 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2013:13:11:24 +0200] cupsdAuthorize: No authentication data provided.
D [10/Oct/2013:13:11:24 +0200] cupsdReadClient: 17 1.1 Send-Document 1
D [10/Oct/2013:13:11:24 +0200] Send-Document ipp://localhost:631/printers/MFC5890CN
D [10/Oct/2013:13:11:24 +0200] cupsdIsAuthorized: requesting-user-name="aengel"
D [10/Oct/2013:13:11:24 +0200] [Job 29] Auto-typing file...
D [10/Oct/2013:13:11:24 +0200] [Job 29] Request file type is application/pdf.
D [10/Oct/2013:13:11:24 +0200] cupsdMarkDirty(----J-)
D [10/Oct/2013:13:11:24 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
I [10/Oct/2013:13:11:24 +0200] [Job 29] File of type application/pdf queued by "aengel".
I [10/Oct/2013:13:11:24 +0200] [Job 29] Adding end banner page "none".
D [10/Oct/2013:13:11:24 +0200] cupsdMarkDirty(----J-)
D [10/Oct/2013:13:11:24 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2013:13:11:24 +0200] cupsdMarkDirty(----J-)
D [10/Oct/2013:13:11:24 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2013:13:11:24 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2013:13:11:24 +0200] cupsdMarkDirty(-----S)
D [10/Oct/2013:13:11:24 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2013:13:11:24 +0200] [Job 29] job-sheets=none,none
D [10/Oct/2013:13:11:24 +0200] [Job 29] argv[0]="MFC5890CN"
D [10/Oct/2013:13:11:24 +0200] [Job 29] argv[1]="29"
D [10/Oct/2013:13:11:24 +0200] [Job 29] argv[2]="aengel"
D [10/Oct/2013:13:11:24 +0200] [Job 29] argv[3]="Unbenannt1"
D [10/Oct/2013:13:11:24 +0200] [Job 29] argv[4]="1"
D [10/Oct/2013:13:11:24 +0200] [Job 29] argv[5]="PageSize=BrA4_B job-uuid=urn:uuid:0e086016-e99c-3084-67ca-e55559638386 job-originating-host-name=localhost time-at-creation=1381403484 time-at-processing=1381403484"
D [10/Oct/2013:13:11:24 +0200] [Job 29] argv[6]="/var/spool/cups/d00029-001"
D [10/Oct/2013:13:11:24 +0200] [Job 29] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [10/Oct/2013:13:11:24 +0200] [Job 29] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [10/Oct/2013:13:11:24 +0200] [Job 29] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc-root"
D [10/Oct/2013:13:11:24 +0200] [Job 29] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [10/Oct/2013:13:11:24 +0200] [Job 29] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [10/Oct/2013:13:11:24 +0200] [Job 29] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [10/Oct/2013:13:11:24 +0200] [Job 29] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [10/Oct/2013:13:11:24 +0200] [Job 29] envp[7]="CUPS_STATEDIR=/var/run/cups"
D [10/Oct/2013:13:11:24 +0200] [Job 29] envp[8]="HOME=/var/spool/cups/tmp"
D [10/Oct/2013:13:11:24 +0200] [Job 29] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [10/Oct/2013:13:11:24 +0200] [Job 29] envp[10]="SERVER_ADMIN=root@uriel"
D [10/Oct/2013:13:11:24 +0200] [Job 29] envp[11]="SOFTWARE=CUPS/1.5.3"
D [10/Oct/2013:13:11:24 +0200] [Job 29] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [10/Oct/2013:13:11:24 +0200] [Job 29] envp[13]="TZ=Europe/Berlin"
D [10/Oct/2013:13:11:24 +0200] [Job 29] envp[14]="USER=root"
D [10/Oct/2013:13:11:24 +0200] [Job 29] envp[15]="CUPS_SERVER=/var/run/cups/cups.sock"
D [10/Oct/2013:13:11:24 +0200] [Job 29] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [10/Oct/2013:13:11:24 +0200] [Job 29] envp[17]="IPP_PORT=631"
D [10/Oct/2013:13:11:24 +0200] [Job 29] envp[18]="CHARSET=utf-8"
D [10/Oct/2013:13:11:24 +0200] [Job 29] envp[19]="LANG=de_DE.UTF-8"
D [10/Oct/2013:13:11:24 +0200] [Job 29] envp[20]="PPD=/etc/cups/ppd/MFC5890CN.ppd"
D [10/Oct/2013:13:11:24 +0200] [Job 29] envp[21]="RIP_MAX_CACHE=128m"
D [10/Oct/2013:13:11:24 +0200] [Job 29] envp[22]="CONTENT_TYPE=application/pdf"
D [10/Oct/2013:13:11:24 +0200] [Job 29] envp[23]="DEVICE_URI=dnssd://Brother%20MFC-5890CN._pdl-datastream._tcp.local/"
D [10/Oct/2013:13:11:24 +0200] [Job 29] envp[24]="PRINTER_INFO=BrotherTintenpisser"
D [10/Oct/2013:13:11:24 +0200] [Job 29] envp[25]="PRINTER_LOCATION=Hochlarmark"
D [10/Oct/2013:13:11:24 +0200] [Job 29] envp[26]="PRINTER=MFC5890CN"
D [10/Oct/2013:13:11:24 +0200] [Job 29] envp[27]="PRINTER_STATE_REASONS=none"
D [10/Oct/2013:13:11:24 +0200] [Job 29] envp[28]="CUPS_FILETYPE=document"
D [10/Oct/2013:13:11:24 +0200] [Job 29] envp[29]="FINAL_CONTENT_TYPE=printer/MFC5890CN"
D [10/Oct/2013:13:11:24 +0200] [Job 29] envp[30]="AUTH_I****"
I [10/Oct/2013:13:11:24 +0200] [Job 29] Started filter /usr/lib/cups/filter/pdftopdf (PID 5154)
I [10/Oct/2013:13:11:24 +0200] [Job 29] Started filter /usr/lib/cups/filter/pdftops (PID 5155)
I [10/Oct/2013:13:11:24 +0200] [Job 29] Started filter /usr/lib/cups/filter/brlpdwrappermfc5890cn (PID 5156)
I [10/Oct/2013:13:11:24 +0200] [Job 29] Started backend /usr/lib/cups/backend/dnssd (PID 5157)
D [10/Oct/2013:13:11:24 +0200] cupsdMarkDirty(-----S)
D [10/Oct/2013:13:11:24 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients and dirty files"
D [10/Oct/2013:13:11:24 +0200] Returning IPP successful-ok for Send-Document (ipp://localhost:631/printers/MFC5890CN) from localhost
D [10/Oct/2013:13:11:24 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2013:13:11:24 +0200] [Notifier] state=3
D [10/Oct/2013:13:11:24 +0200] [Job 29] pdftops - copying to temp print file "/var/spool/cups/tmp/01423525cb7ba"
D [10/Oct/2013:13:11:24 +0200] [Notifier] Connected to D-BUS
D [10/Oct/2013:13:11:24 +0200] [Notifier] JobCreated
D [10/Oct/2013:13:11:24 +0200] [Notifier] state=3
D [10/Oct/2013:13:11:24 +0200] [Notifier] PrinterStateChanged
D [10/Oct/2013:13:11:24 +0200] [Notifier] state=3
D [10/Oct/2013:13:11:24 +0200] [Notifier] JobState
D [10/Oct/2013:13:11:24 +0200] cupsdAcceptClient: 22 from localhost (Domain)
D [10/Oct/2013:13:11:24 +0200] cupsdReadClient: 22 POST / HTTP/1.1
D [10/Oct/2013:13:11:24 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2013:13:11:24 +0200] cupsdAuthorize: No authentication data provided.
D [10/Oct/2013:13:11:24 +0200] cupsdReadClient: 22 1.1 Get-Job-Attributes 1
D [10/Oct/2013:13:11:24 +0200] Get-Job-Attributes ipp://localhost/jobs/29
D [10/Oct/2013:13:11:24 +0200] Returning IPP successful-ok for Get-Job-Attributes (ipp://localhost/jobs/29) from localhost
D [10/Oct/2013:13:11:24 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2013:13:11:24 +0200] cupsdAcceptClient: 23 from localhost (Domain)
D [10/Oct/2013:13:11:24 +0200] cupsdReadClient: 23 POST / HTTP/1.1
D [10/Oct/2013:13:11:24 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2013:13:11:24 +0200] cupsdAuthorize: No authentication data provided.
D [10/Oct/2013:13:11:24 +0200] cupsdReadClient: 23 1.1 Get-Job-Attributes 1
D [10/Oct/2013:13:11:24 +0200] Get-Job-Attributes ipp://localhost/jobs/29
D [10/Oct/2013:13:11:24 +0200] Returning IPP successful-ok for Get-Job-Attributes (ipp://localhost/jobs/29) from localhost
D [10/Oct/2013:13:11:24 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2013:13:11:24 +0200] [Job 29] Resolving "Brother MFC-5890CN._pdl-datastream._tcp.local"...
D [10/Oct/2013:13:11:24 +0200] [Job 29] STATE: +connecting-to-device
D [10/Oct/2013:13:11:24 +0200] [Job 29] Resolving "Brother MFC-5890CN", regtype="_pdl-datastream._tcp", domain="local."...
D [10/Oct/2013:13:11:24 +0200] cupsdMarkDirty(-----S)
D [10/Oct/2013:13:11:24 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2013:13:11:24 +0200] [Notifier] state=3
D [10/Oct/2013:13:11:24 +0200] [Notifier] PrinterStateChanged
D [10/Oct/2013:13:11:24 +0200] [Job 29] Using image rendering resolution 600 dpi
D [10/Oct/2013:13:11:24 +0200] [Job 29] Deactivation of Ghostscript's image compression for Brother printers to workarounmd PS interpreter bug
D [10/Oct/2013:13:11:24 +0200] [Job 29] Started filter gs (PID 5166)
D [10/Oct/2013:13:11:24 +0200] [Job 29] Started post-processing (PID 5167)
D [10/Oct/2013:13:11:24 +0200] [Job 29] Started filter pstops (PID 5168)
D [10/Oct/2013:13:11:24 +0200] PID 5154 (/usr/lib/cups/filter/pdftopdf) exited with no errors.
D [10/Oct/2013:13:11:24 +0200] cupsdAcceptClient: 24 from localhost (Domain)
D [10/Oct/2013:13:11:24 +0200] cupsdReadClient: 24 POST / HTTP/1.1
D [10/Oct/2013:13:11:24 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2013:13:11:24 +0200] cupsdAuthorize: No authentication data provided.
D [10/Oct/2013:13:11:24 +0200] cupsdReadClient: 24 1.1 CUPS-Get-Printers 1
D [10/Oct/2013:13:11:24 +0200] CUPS-Get-Printers
D [10/Oct/2013:13:11:24 +0200] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost
D [10/Oct/2013:13:11:24 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2013:13:11:24 +0200] cupsdReadClient: 24 POST / HTTP/1.1
D [10/Oct/2013:13:11:24 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2013:13:11:24 +0200] cupsdAuthorize: No authentication data provided.
D [10/Oct/2013:13:11:24 +0200] cupsdReadClient: 24 1.1 CUPS-Get-Default 1
D [10/Oct/2013:13:11:24 +0200] CUPS-Get-Default
D [10/Oct/2013:13:11:24 +0200] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost
D [10/Oct/2013:13:11:24 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2013:13:11:24 +0200] [Job 29] Resolved as "socket://192.168.11.200:9100"...
D [10/Oct/2013:13:11:24 +0200] [Job 29] STATE: -connecting-to-device,offline-report
D [10/Oct/2013:13:11:24 +0200] [Job 29] Executing backend "/usr/lib/cups/backend/socket"...
D [10/Oct/2013:13:11:24 +0200] cupsdMarkDirty(-----S)
D [10/Oct/2013:13:11:24 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Dirty files"
D [10/Oct/2013:13:11:24 +0200] [Notifier] state=3
D [10/Oct/2013:13:11:24 +0200] [Notifier] PrinterStateChanged
D [10/Oct/2013:13:11:24 +0200] cupsdReadClient: 24 POST / HTTP/1.1
D [10/Oct/2013:13:11:24 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2013:13:11:24 +0200] cupsdAuthorize: No authentication data provided.
D [10/Oct/2013:13:11:24 +0200] cupsdReadClient: 24 1.1 CUPS-Get-Printers 1
D [10/Oct/2013:13:11:24 +0200] CUPS-Get-Printers
D [10/Oct/2013:13:11:24 +0200] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost
D [10/Oct/2013:13:11:24 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2013:13:11:24 +0200] [Job 29] STATE: +connecting-to-device
D [10/Oct/2013:13:11:24 +0200] cupsdMarkDirty(-----S)
D [10/Oct/2013:13:11:24 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2013:13:11:24 +0200] [Notifier] state=3
D [10/Oct/2013:13:11:24 +0200] [Notifier] PrinterStateChanged
D [10/Oct/2013:13:11:24 +0200] [Job 29] Looking up "192.168.11.200"...
D [10/Oct/2013:13:11:24 +0200] cupsdReadClient: 24 POST / HTTP/1.1
D [10/Oct/2013:13:11:24 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2013:13:11:24 +0200] cupsdAuthorize: No authentication data provided.
D [10/Oct/2013:13:11:24 +0200] cupsdReadClient: 24 1.1 CUPS-Get-Default 1
D [10/Oct/2013:13:11:24 +0200] CUPS-Get-Default
D [10/Oct/2013:13:11:24 +0200] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost
D [10/Oct/2013:13:11:24 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2013:13:11:24 +0200] cupsdReadClient: 24 POST / HTTP/1.1
D [10/Oct/2013:13:11:24 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2013:13:11:24 +0200] cupsdAuthorize: No authentication data provided.
D [10/Oct/2013:13:11:24 +0200] cupsdReadClient: 24 1.1 CUPS-Get-Printers 1
D [10/Oct/2013:13:11:24 +0200] CUPS-Get-Printers
D [10/Oct/2013:13:11:24 +0200] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost
D [10/Oct/2013:13:11:24 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2013:13:11:24 +0200] cupsdReadClient: 24 POST / HTTP/1.1
D [10/Oct/2013:13:11:24 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2013:13:11:24 +0200] cupsdAuthorize: No authentication data provided.
D [10/Oct/2013:13:11:24 +0200] cupsdReadClient: 24 1.1 CUPS-Get-Default 1
D [10/Oct/2013:13:11:24 +0200] CUPS-Get-Default
D [10/Oct/2013:13:11:24 +0200] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost
D [10/Oct/2013:13:11:24 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2013:13:11:24 +0200] [Job 29] ATTR: marker-colors=#000000,#FFFF00,#00FFFF,#FF00FF
D [10/Oct/2013:13:11:24 +0200] cupsdMarkDirty(P-----)
D [10/Oct/2013:13:11:24 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [10/Oct/2013:13:11:24 +0200] [Job 29] ATTR: marker-names='"Black Ink Cartridge"','"Yellow Ink Cartridge"','"Cyan Ink Cartridge"','"Magenta Ink Cartridge"'
D [10/Oct/2013:13:11:24 +0200] cupsdMarkDirty(P-----)
D [10/Oct/2013:13:11:24 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [10/Oct/2013:13:11:24 +0200] [Job 29] ATTR: marker-types=inkCartridge,inkCartridge,inkCartridge,inkCartridge
D [10/Oct/2013:13:11:24 +0200] cupsdMarkDirty(P-----)
D [10/Oct/2013:13:11:24 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [10/Oct/2013:13:11:24 +0200] [Job 29] ATTR: marker-levels=-1,-1,-1,-1
D [10/Oct/2013:13:11:24 +0200] cupsdMarkDirty(P-----)
D [10/Oct/2013:13:11:24 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [10/Oct/2013:13:11:24 +0200] [Job 29] new_supply_state=0, change_state=ffff
D [10/Oct/2013:13:11:24 +0200] [Job 29] STATE: -developer-low-report
D [10/Oct/2013:13:11:24 +0200] [Job 29] STATE: -developer-empty-warning
D [10/Oct/2013:13:11:24 +0200] cupsdMarkDirty(-----S)
D [10/Oct/2013:13:11:24 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [10/Oct/2013:13:11:24 +0200] [Job 29] STATE: -marker-supply-low-report
D [10/Oct/2013:13:11:24 +0200] [Job 29] STATE: -marker-supply-empty-warning
D [10/Oct/2013:13:11:24 +0200] [Job 29] STATE: -opc-near-eol-report
D [10/Oct/2013:13:11:24 +0200] [Job 29] STATE: -opc-life-over-warning
D [10/Oct/2013:13:11:24 +0200] [Job 29] STATE: -toner-low-report
D [10/Oct/2013:13:11:24 +0200] [Job 29] STATE: -toner-empty-warning
D [10/Oct/2013:13:11:24 +0200] [Job 29] new_state=0, change_state=ffff
D [10/Oct/2013:13:11:24 +0200] [Job 29] STATE: -media-low-report
D [10/Oct/2013:13:11:24 +0200] [Job 29] STATE: -media-empty-warning
D [10/Oct/2013:13:11:24 +0200] [Job 29] STATE: -door-open-report
D [10/Oct/2013:13:11:24 +0200] [Job 29] STATE: -media-jam-warning
D [10/Oct/2013:13:11:24 +0200] [Job 29] STATE: -input-tray-missing-warning
D [10/Oct/2013:13:11:24 +0200] [Job 29] STATE: -output-tray-missing-warning
D [10/Oct/2013:13:11:24 +0200] [Job 29] STATE: -marker-supply-missing-warning
D [10/Oct/2013:13:11:24 +0200] [Job 29] STATE: -output-area-almost-full-report
D [10/Oct/2013:13:11:24 +0200] [Job 29] STATE: -output-area-full-warning
D [10/Oct/2013:13:11:24 +0200] [Notifier] state=3
D [10/Oct/2013:13:11:24 +0200] [Notifier] PrinterStateChanged
D [10/Oct/2013:13:11:24 +0200] cupsdReadClient: 24 POST / HTTP/1.1
D [10/Oct/2013:13:11:24 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2013:13:11:24 +0200] cupsdAuthorize: No authentication data provided.
D [10/Oct/2013:13:11:24 +0200] [Job 29] backendWaitLoop(snmp_fd=5, addr=0x7fc72207ea28, side_cb=0x7fc721635460)
D [10/Oct/2013:13:11:24 +0200] cupsdReadClient: 24 1.1 CUPS-Get-Printers 1
D [10/Oct/2013:13:11:24 +0200] CUPS-Get-Printers
D [10/Oct/2013:13:11:24 +0200] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost
D [10/Oct/2013:13:11:24 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2013:13:11:24 +0200] cupsdReadClient: 24 POST / HTTP/1.1
D [10/Oct/2013:13:11:24 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2013:13:11:24 +0200] cupsdAuthorize: No authentication data provided.
D [10/Oct/2013:13:11:24 +0200] cupsdReadClient: 24 1.1 CUPS-Get-Default 1
D [10/Oct/2013:13:11:24 +0200] CUPS-Get-Default
D [10/Oct/2013:13:11:24 +0200] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost
D [10/Oct/2013:13:11:24 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2013:13:11:24 +0200] [Job 29] Inserted workaround PostScript code for Brother printers
D [10/Oct/2013:13:11:24 +0200] [Job 29] Page = 601x845; 6,6 to 595,839
D [10/Oct/2013:13:11:24 +0200] [Job 29] slow_collate=0, slow_duplex=0, slow_order=0
D [10/Oct/2013:13:11:24 +0200] [Job 29] Before copy_comments - %!PS-Adobe-3.0
D [10/Oct/2013:13:11:24 +0200] [Job 29] %!PS-Adobe-3.0
D [10/Oct/2013:13:11:24 +0200] [Job 29] %%BoundingBox: 0 0 595 842
D [10/Oct/2013:13:11:24 +0200] [Job 29] %%Creator: GPL Ghostscript 905 (ps2write)
D [10/Oct/2013:13:11:24 +0200] [Job 29] %%LanguageLevel: 2
D [10/Oct/2013:13:11:24 +0200] [Job 29] %%CreationDate: D:20131010131124+02'00'
D [10/Oct/2013:13:11:24 +0200] [Job 29] %%Pages: 1
D [10/Oct/2013:13:11:24 +0200] [Job 29] %%EndComments
D [10/Oct/2013:13:11:24 +0200] [Job 29] Before copy_prolog - %%BeginProlog
D [10/Oct/2013:13:11:24 +0200] [Job 29] Before copy_setup - %%Page: 1 1
D [10/Oct/2013:13:11:24 +0200] [Job 29] Before page loop - %%Page: 1 1
D [10/Oct/2013:13:11:24 +0200] [Job 29] Copying page 1...
D [10/Oct/2013:13:11:24 +0200] [Job 29] pagew = 589.0, pagel = 833.0
D [10/Oct/2013:13:11:24 +0200] [Job 29] bboxx = 0, bboxy = 0, bboxw = 601, bboxl = 845
D [10/Oct/2013:13:11:24 +0200] [Job 29] PageLeft = 6.0, PageRight = 595.0
D [10/Oct/2013:13:11:24 +0200] [Job 29] PageTop = 839.0, PageBottom = 6.0
D [10/Oct/2013:13:11:24 +0200] [Job 29] PageWidth = 601.0, PageLength = 845.0
D [10/Oct/2013:13:11:24 +0200] [Job 29] Wrote 1 pages...
D [10/Oct/2013:13:11:24 +0200] [Job 29] PID 5167 (Post-processing) exited with no errors.
D [10/Oct/2013:13:11:24 +0200] [Job 29] PID 5166 (gs) exited with no errors.
D [10/Oct/2013:13:11:24 +0200] [Job 29] PID 5168 (pstops) exited with no errors.
D [10/Oct/2013:13:11:24 +0200] PID 5155 (/usr/lib/cups/filter/pdftops) exited with no errors.
D [10/Oct/2013:13:11:24 +0200] [Job 29] /usr/lib/cups/filter/brlpdwrappermfc5890cn: 118: /usr/lib/cups/filter/brlpdwrappermfc5890cn: /usr/local/Brother/Printer/mfc5890cn/cupswrapper/brcupsconfpt1: not found
D [10/Oct/2013:13:11:24 +0200] [Job 29] /usr/local/Brother/Printer/mfc5890cn/lpd/filtermfc5890cn: 45: /usr/local/Brother/Printer/mfc5890cn/lpd/filtermfc5890cn: /usr/local/Brother/Printer/mfc5890cn/lpd/brmfc5890cnfilter: not found
D [10/Oct/2013:13:11:24 +0200] PID 5156 (/usr/lib/cups/filter/brlpdwrappermfc5890cn) exited with no errors.
D [10/Oct/2013:13:11:24 +0200] PID 5157 (/usr/lib/cups/backend/dnssd) exited with no errors.
D [10/Oct/2013:13:11:24 +0200] cupsdMarkDirty(-----S)
D [10/Oct/2013:13:11:24 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Dirty files"
I [10/Oct/2013:13:11:24 +0200] [Job 29] Job completed.
D [10/Oct/2013:13:11:24 +0200] cupsdMarkDirty(----J-)
D [10/Oct/2013:13:11:24 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2013:13:11:24 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2013:13:11:24 +0200] cupsdMarkDirty(-----S)
D [10/Oct/2013:13:11:24 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2013:13:11:24 +0200] [Notifier] state=3
D [10/Oct/2013:13:11:24 +0200] [Notifier] JobCompleted
D [10/Oct/2013:13:11:24 +0200] [Notifier] state=3
D [10/Oct/2013:13:11:24 +0200] [Notifier] PrinterStateChanged
D [10/Oct/2013:13:11:24 +0200] cupsdAcceptClient: 20 from localhost (Domain)
D [10/Oct/2013:13:11:24 +0200] cupsdReadClient: 20 POST / HTTP/1.1
D [10/Oct/2013:13:11:24 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2013:13:11:24 +0200] cupsdAuthorize: No authentication data provided.
D [10/Oct/2013:13:11:24 +0200] cupsdReadClient: 20 1.1 Get-Job-Attributes 1
D [10/Oct/2013:13:11:24 +0200] Get-Job-Attributes ipp://localhost/jobs/29
D [10/Oct/2013:13:11:24 +0200] Returning IPP successful-ok for Get-Job-Attributes (ipp://localhost/jobs/29) from localhost
D [10/Oct/2013:13:11:24 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
I [10/Oct/2013:13:11:55 +0200] Saving printers.conf...
I [10/Oct/2013:13:11:56 +0200] Saving job.cache...
I [10/Oct/2013:13:11:56 +0200] Saving subscriptions.conf...
D [10/Oct/2013:13:11:56 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
D [10/Oct/2013:13:12:31 +0200] [Job 29] Unloading...
D [10/Oct/2013:13:12:31 +0200] Report: clients=5
D [10/Oct/2013:13:12:31 +0200] Report: jobs=19
D [10/Oct/2013:13:12:31 +0200] Report: jobs-active=0
D [10/Oct/2013:13:12:31 +0200] Report: printers=2
D [10/Oct/2013:13:12:31 +0200] Report: printers-implicit=0
D [10/Oct/2013:13:12:31 +0200] Report: stringpool-string-count=1765
D [10/Oct/2013:13:12:31 +0200] Report: stringpool-alloc-bytes=13616
D [10/Oct/2013:13:12:31 +0200] Report: stringpool-total-bytes=35472

[Ali22]

Ich nutze für Cups meistens die cupswrapper, die stellen dir dann unter Cups einen entsprechenden Treiber zur Verfügung.
Wenn du findest, such nach einer ppd-Datei, die du dann unter cups hochladen kannst.