Debian 7 mit LXDE: Restart endet neuerdings in tty-Konsole

[KloBoBBerLe]

Liebe Leser,

gestern Abend habe ich auf meinem Notebook ein Windows 7-Debian 7-Dualboot als UEFI aufgesetzt.
Zunächst hatte auch alles bestens funktioniert, ich konnte mich problemlos anmelden und hatte eine grafische LXDE-Oberfläche.

Beim Neustart von Debian heute Morgen jedoch endete der Systemstart-Prozess in der tty-Konsole. Ich habe mich (in der Konsole) mit meinem Benutzernamen eingeloggt und wollte Icedove starten, daraufhin erschien folgende Fehlermeldung:

Error: no display specified

Leider werde ich aus diversen Foren-Beiträgen nicht wirklich schlau: Die Eingabe von "DISPLAY=:0" hatte überhaupt keine Auswirkung.
Vor dem Herunterfahren gestern Abend hatte ich die grafische Display-Anzeige (Display 0 oder 1) aus dem Panel entfernt, dies dürfte doch allerdings überhaupt keine Auswirkungen haben, da es ja nur um die Anzeige ging? Oder hat es da irgend einen XServer zerlegt o.Ä.?

Wie erhalte ich meine grafische LXDE-Oberfläche wieder zurück?

Herzlichen Dank für Eure Hilfe!

Viele Grüße
KloBoBBerLe

[KloBoBBerLe]

Nachtrag:

Bei Eingabe von startx gelange ich wie gewöhnlich in die grafische Oberfläche.
Doch warum erscheint denn nun überhaupt zunächst die tty-Konsole und nicht das grafische Log-In-Fenster?

[Draal]

Hallo KloBoBBerLe,

falls es sie gibt, wurde moeglicherweise Deine xorg.conf in /etc/X11 beschaedigt.
Was steht denn in /var/log/Xorg.0.log ?

viele Gruesse

Draal

[KloBoBBerLe]

Hallo Draal,

herzlichen Dank für Deine schnelle Antwort!

Ich hoffe, dass mir jetzt aufgrund des langen Eintrages niemand den Kopf abreisst...

Code: Alles auswählen

[  5747.626] 
X.Org X Server 1.12.4
Release Date: 2012-08-27
[  5747.627] X Protocol Version 11, Revision 0
[  5747.627] Build Operating System: Linux 3.2.0-4-amd64 x86_64 Debian
[  5747.627] Current Operating System: Linux Dave 3.2.0-4-amd64 #1 SMP Debian 3.2.41-2+deb7u2 x86_64
[  5747.627] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=a056e60c-4eae-4928-8d95-80e2e4aa4848 ro quiet
[  5747.627] Build Date: 17 April 2013  10:22:47AM
[  5747.627] xorg-server 2:1.12.4-6 (Julien Cristau <jcristau@debian.org>) 
[  5747.627] Current version of pixman: 0.26.0
[  5747.627] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  5747.627] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  5747.627] (==) Log file: "/var/log/Xorg.0.log", Time: Mon May 20 15:25:52 2013
[  5747.628] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  5747.628] (==) No Layout section.  Using the first Screen section.
[  5747.628] (==) No screen section available. Using defaults.
[  5747.628] (**) |-->Screen "Default Screen Section" (0)
[  5747.628] (**) |   |-->Monitor "<default monitor>"
[  5747.629] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[  5747.629] (==) Automatically adding devices
[  5747.629] (==) Automatically enabling devices
[  5747.629] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[  5747.629] 	Entry deleted from font path.
[  5747.629] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[  5747.629] 	Entry deleted from font path.
[  5747.629] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	built-ins
[  5747.629] (==) ModulePath set to "/usr/lib/xorg/modules"
[  5747.629] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[  5747.629] (II) Loader magic: 0x7f54a7acdae0
[  5747.629] (II) Module ABI versions:
[  5747.629] 	X.Org ANSI C Emulation: 0.4
[  5747.629] 	X.Org Video Driver: 12.1
[  5747.629] 	X.Org XInput driver : 16.0
[  5747.629] 	X.Org Server Extension : 6.0
[  5747.630] (--) PCI:*(0:1:0:0) 10de:0dfa:103c:1631 rev 161, Mem @ 0xd0000000/16777216, 0xc0000000/134217728, 0xc8000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[  5747.631] (II) Open ACPI successful (/var/run/acpid.socket)
[  5747.631] (II) LoadModule: "extmod"
[  5747.631] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[  5747.632] (II) Module extmod: vendor="X.Org Foundation"
[  5747.632] 	compiled for 1.12.4, module version = 1.0.0
[  5747.632] 	Module class: X.Org Server Extension
[  5747.632] 	ABI class: X.Org Server Extension, version 6.0
[  5747.632] (II) Loading extension SELinux
[  5747.632] (II) Loading extension MIT-SCREEN-SAVER
[  5747.632] (II) Loading extension XFree86-VidModeExtension
[  5747.632] (II) Loading extension XFree86-DGA
[  5747.632] (II) Loading extension DPMS
[  5747.632] (II) Loading extension XVideo
[  5747.632] (II) Loading extension XVideo-MotionCompensation
[  5747.632] (II) Loading extension X-Resource
[  5747.632] (II) LoadModule: "dbe"
[  5747.633] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[  5747.633] (II) Module dbe: vendor="X.Org Foundation"
[  5747.633] 	compiled for 1.12.4, module version = 1.0.0
[  5747.633] 	Module class: X.Org Server Extension
[  5747.633] 	ABI class: X.Org Server Extension, version 6.0
[  5747.633] (II) Loading extension DOUBLE-BUFFER
[  5747.633] (II) LoadModule: "glx"
[  5747.633] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  5747.634] (II) Module glx: vendor="X.Org Foundation"
[  5747.634] 	compiled for 1.12.4, module version = 1.0.0
[  5747.634] 	ABI class: X.Org Server Extension, version 6.0
[  5747.634] (==) AIGLX enabled
[  5747.634] (II) Loading extension GLX
[  5747.634] (II) LoadModule: "record"
[  5747.634] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[  5747.634] (II) Module record: vendor="X.Org Foundation"
[  5747.635] 	compiled for 1.12.4, module version = 1.13.0
[  5747.635] 	Module class: X.Org Server Extension
[  5747.635] 	ABI class: X.Org Server Extension, version 6.0
[  5747.635] (II) Loading extension RECORD
[  5747.635] (II) LoadModule: "dri"
[  5747.635] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[  5747.635] (II) Module dri: vendor="X.Org Foundation"
[  5747.635] 	compiled for 1.12.4, module version = 1.0.0
[  5747.635] 	ABI class: X.Org Server Extension, version 6.0
[  5747.635] (II) Loading extension XFree86-DRI
[  5747.635] (II) LoadModule: "dri2"
[  5747.636] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[  5747.636] (II) Module dri2: vendor="X.Org Foundation"
[  5747.636] 	compiled for 1.12.4, module version = 1.2.0
[  5747.636] 	ABI class: X.Org Server Extension, version 6.0
[  5747.636] (II) Loading extension DRI2
[  5747.636] (==) Matched nouveau as autoconfigured driver 0
[  5747.636] (==) Matched nv as autoconfigured driver 1
[  5747.636] (==) Matched vesa as autoconfigured driver 2
[  5747.636] (==) Matched fbdev as autoconfigured driver 3
[  5747.636] (==) Assigned the driver to the xf86ConfigLayout
[  5747.636] (II) LoadModule: "nouveau"
[  5747.636] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[  5747.636] (II) Module nouveau: vendor="X.Org Foundation"
[  5747.636] 	compiled for 1.12.4, module version = 1.0.1
[  5747.636] 	Module class: X.Org Video Driver
[  5747.636] 	ABI class: X.Org Video Driver, version 12.1
[  5747.636] (II) LoadModule: "nv"
[  5747.636] (WW) Warning, couldn't open module nv
[  5747.636] (II) UnloadModule: "nv"
[  5747.636] (II) Unloading nv
[  5747.636] (EE) Failed to load module "nv" (module does not exist, 0)
[  5747.636] (II) LoadModule: "vesa"
[  5747.636] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[  5747.636] (II) Module vesa: vendor="X.Org Foundation"
[  5747.636] 	compiled for 1.12.1, module version = 2.3.1
[  5747.636] 	Module class: X.Org Video Driver
[  5747.636] 	ABI class: X.Org Video Driver, version 12.0
[  5747.636] (II) LoadModule: "fbdev"
[  5747.637] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[  5747.637] (II) Module fbdev: vendor="X.Org Foundation"
[  5747.637] 	compiled for 1.12.1, module version = 0.4.2
[  5747.637] 	ABI class: X.Org Video Driver, version 12.0
[  5747.637] (II) NOUVEAU driver Date:   Fri Jul 6 16:23:50 2012 +1000
[  5747.637] (II) NOUVEAU driver for NVIDIA chipset families :
[  5747.637] 	RIVA TNT        (NV04)
[  5747.637] 	RIVA TNT2       (NV05)
[  5747.637] 	GeForce 256     (NV10)
[  5747.637] 	GeForce 2       (NV11, NV15)
[  5747.637] 	GeForce 4MX     (NV17, NV18)
[  5747.637] 	GeForce 3       (NV20)
[  5747.637] 	GeForce 4Ti     (NV25, NV28)
[  5747.637] 	GeForce FX      (NV3x)
[  5747.637] 	GeForce 6       (NV4x)
[  5747.637] 	GeForce 7       (G7x)
[  5747.637] 	GeForce 8       (G8x)
[  5747.637] 	GeForce GTX 200 (NVA0)
[  5747.637] 	GeForce GTX 400 (NVC0)
[  5747.637] (II) VESA: driver for VESA chipsets: vesa
[  5747.637] (II) FBDEV: driver for framebuffer: fbdev
[  5747.637] (--) using VT number 7

[  5747.643] drmOpenDevice: node name is /dev/dri/card0
[  5747.643] drmOpenDevice: open result is 8, (OK)
[  5747.644] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[  5747.644] drmOpenDevice: node name is /dev/dri/card0
[  5747.644] drmOpenDevice: open result is 8, (OK)
[  5747.644] drmOpenByBusid: drmOpenMinor returns 8
[  5747.644] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[  5747.644] (II) [drm] nouveau interface version: 1.0.0
[  5747.644] (WW) Falling back to old probe method for vesa
[  5747.644] (WW) Falling back to old probe method for fbdev
[  5747.644] (II) Loading sub module "fbdevhw"
[  5747.644] (II) LoadModule: "fbdevhw"
[  5747.644] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[  5747.644] (II) Module fbdevhw: vendor="X.Org Foundation"
[  5747.644] 	compiled for 1.12.4, module version = 0.0.2
[  5747.644] 	ABI class: X.Org Video Driver, version 12.1
[  5747.645] (II) Loading sub module "dri"
[  5747.645] (II) LoadModule: "dri"
[  5747.645] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[  5747.645] (II) Module dri: vendor="X.Org Foundation"
[  5747.645] 	compiled for 1.12.4, module version = 1.0.0
[  5747.645] 	ABI class: X.Org Server Extension, version 6.0
[  5747.645] (II) NOUVEAU(0): Loaded DRI module
[  5747.645] drmOpenDevice: node name is /dev/dri/card0
[  5747.645] drmOpenDevice: open result is 9, (OK)
[  5747.645] drmOpenDevice: node name is /dev/dri/card0
[  5747.645] drmOpenDevice: open result is 9, (OK)
[  5747.646] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[  5747.646] drmOpenDevice: node name is /dev/dri/card0
[  5747.646] drmOpenDevice: open result is 9, (OK)
[  5747.646] drmOpenByBusid: drmOpenMinor returns 9
[  5747.646] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[  5747.646] (II) [drm] DRM interface version 1.4
[  5747.646] (II) [drm] DRM open master succeeded.
[  5747.646] (--) NOUVEAU(0): Chipset: "NVIDIA NVc1"
[  5747.646] (II) NOUVEAU(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[  5747.646] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[  5747.646] (==) NOUVEAU(0): RGB weight 888
[  5747.646] (==) NOUVEAU(0): Default visual is TrueColor
[  5747.646] (==) NOUVEAU(0): Using HW cursor
[  5747.646] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[  5747.646] (==) NOUVEAU(0): Page flipping enabled
[  5747.646] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[  5747.689] (II) NOUVEAU(0): Output LVDS-1 has no monitor section
[  5747.816] (II) NOUVEAU(0): Output DP-1 has no monitor section
[  5747.944] (II) NOUVEAU(0): Output DP-2 has no monitor section
[  5747.944] (II) NOUVEAU(0): Output eDP-1 has no monitor section
[  5748.072] (II) NOUVEAU(0): Output DP-3 has no monitor section
[  5748.163] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[  5748.195] (II) NOUVEAU(0): EDID for output LVDS-1
[  5748.195] (II) NOUVEAU(0): Manufacturer: LGD  Model: 259  Serial#: 0
[  5748.195] (II) NOUVEAU(0): Year: 2009  Week: 0
[  5748.195] (II) NOUVEAU(0): EDID Version: 1.3
[  5748.195] (II) NOUVEAU(0): Digital Display Input
[  5748.195] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 35  vert.: 19
[  5748.195] (II) NOUVEAU(0): Gamma: 2.20
[  5748.195] (II) NOUVEAU(0): No DPMS capabilities specified
[  5748.196] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[  5748.196] (II) NOUVEAU(0): First detailed timing is preferred mode
[  5748.196] (II) NOUVEAU(0): redX: 0.617 redY: 0.349   greenX: 0.313 greenY: 0.595
[  5748.196] (II) NOUVEAU(0): blueX: 0.151 blueY: 0.056   whiteX: 0.313 whiteY: 0.329
[  5748.196] (II) NOUVEAU(0): Manufacturer's mask: 0
[  5748.196] (II) NOUVEAU(0): Supported detailed timing:
[  5748.196] (II) NOUVEAU(0): clock: 138.5 MHz   Image Size:  345 x 194 mm
[  5748.196] (II) NOUVEAU(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
[  5748.196] (II) NOUVEAU(0): v_active: 1080  v_sync: 1083  v_sync_end 1088 v_blanking: 1111 v_border: 0
[  5748.196] (II) NOUVEAU(0):  LG Display
[  5748.196] (II) NOUVEAU(0):  LP156WF1-TLF3
[  5748.196] (II) NOUVEAU(0): EDID (in hex):
[  5748.196] (II) NOUVEAU(0): 	00ffffffffffff0030e4590200000000
[  5748.196] (II) NOUVEAU(0): 	00130103802313780a15d59e59509826
[  5748.196] (II) NOUVEAU(0): 	0e505400000001010101010101010101
[  5748.196] (II) NOUVEAU(0): 	0101010101011a3680a070381f403020
[  5748.196] (II) NOUVEAU(0): 	350059c2100000190000000000000000
[  5748.196] (II) NOUVEAU(0): 	00000000000000000000000000fe004c
[  5748.196] (II) NOUVEAU(0): 	4720446973706c61790a2020000000fe
[  5748.196] (II) NOUVEAU(0): 	004c503135365746312d544c4633003c
[  5748.196] (II) NOUVEAU(0): EDID vendor "LGD", prod id 601
[  5748.196] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[  5748.196] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  138.50  1920 1968 2000 2080  1080 1083 1088 1111 -hsync -vsync (66.6 kHz eP)
[  5748.196] (II) NOUVEAU(0): Printing probed modes for output LVDS-1
[  5748.196] (II) NOUVEAU(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 -hsync -vsync (66.6 kHz eP)
[  5748.196] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync (67.2 kHz e)
[  5748.196] (II) NOUVEAU(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[  5748.196] (II) NOUVEAU(0): Modeline "1400x1050"x60.0  121.75  1400 1488 1632 1864  1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[  5748.196] (II) NOUVEAU(0): Modeline "1280x1024"x59.9  109.00  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync (63.7 kHz e)
[  5748.196] (II) NOUVEAU(0): Modeline "1280x960"x59.9  101.25  1280 1360 1488 1696  960 963 967 996 -hsync +vsync (59.7 kHz e)
[  5748.196] (II) NOUVEAU(0): Modeline "1152x864"x60.0   81.75  1152 1216 1336 1520  864 867 871 897 -hsync +vsync (53.8 kHz e)
[  5748.196] (II) NOUVEAU(0): Modeline "1024x768"x59.9   63.50  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz e)
[  5748.196] (II) NOUVEAU(0): Modeline "800x600"x59.9   38.25  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz e)
[  5748.196] (II) NOUVEAU(0): Modeline "640x480"x59.4   23.75  640 664 720 800  480 483 487 500 -hsync +vsync (29.7 kHz e)
[  5748.196] (II) NOUVEAU(0): Modeline "720x400"x59.6   22.25  720 744 808 896  400 403 413 417 -hsync +vsync (24.8 kHz e)
[  5748.196] (II) NOUVEAU(0): Modeline "640x400"x60.0   20.00  640 664 720 800  400 403 409 417 -hsync +vsync (25.0 kHz e)
[  5748.196] (II) NOUVEAU(0): Modeline "640x350"x59.8   17.50  640 664 720 800  350 353 363 366 -hsync +vsync (21.9 kHz e)
[  5748.324] (II) NOUVEAU(0): EDID for output DP-1
[  5748.452] (II) NOUVEAU(0): EDID for output DP-2
[  5748.452] (II) NOUVEAU(0): EDID for output eDP-1
[  5748.580] (II) NOUVEAU(0): EDID for output DP-3
[  5748.671] (II) NOUVEAU(0): EDID for output VGA-1
[  5748.671] (II) NOUVEAU(0): Output LVDS-1 connected
[  5748.671] (II) NOUVEAU(0): Output DP-1 disconnected
[  5748.671] (II) NOUVEAU(0): Output DP-2 disconnected
[  5748.671] (II) NOUVEAU(0): Output eDP-1 disconnected
[  5748.671] (II) NOUVEAU(0): Output DP-3 disconnected
[  5748.671] (II) NOUVEAU(0): Output VGA-1 disconnected
[  5748.671] (II) NOUVEAU(0): Using exact sizes for initial modes
[  5748.671] (II) NOUVEAU(0): Output LVDS-1 using initial mode 1920x1080
[  5748.671] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[  5748.671] (--) NOUVEAU(0): Virtual size is 1920x1080 (pitch 0)
[  5748.671] (**) NOUVEAU(0):  Driver mode "1920x1080": 138.5 MHz (scaled from 0.0 MHz), 66.6 kHz, 59.9 Hz
[  5748.671] (II) NOUVEAU(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 -hsync -vsync (66.6 kHz eP)
[  5748.671] (**) NOUVEAU(0):  Driver mode "1920x1080": 173.0 MHz (scaled from 0.0 MHz), 67.2 kHz, 60.0 Hz
[  5748.671] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync (67.2 kHz e)
[  5748.671] (**) NOUVEAU(0):  Driver mode "1680x1050": 146.2 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
[  5748.671] (II) NOUVEAU(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[  5748.671] (**) NOUVEAU(0):  Driver mode "1400x1050": 121.8 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
[  5748.671] (II) NOUVEAU(0): Modeline "1400x1050"x60.0  121.75  1400 1488 1632 1864  1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[  5748.671] (**) NOUVEAU(0):  Driver mode "1280x1024": 109.0 MHz (scaled from 0.0 MHz), 63.7 kHz, 59.9 Hz
[  5748.671] (II) NOUVEAU(0): Modeline "1280x1024"x59.9  109.00  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync (63.7 kHz e)
[  5748.671] (**) NOUVEAU(0):  Driver mode "1280x960": 101.2 MHz (scaled from 0.0 MHz), 59.7 kHz, 59.9 Hz
[  5748.671] (II) NOUVEAU(0): Modeline "1280x960"x59.9  101.25  1280 1360 1488 1696  960 963 967 996 -hsync +vsync (59.7 kHz e)
[  5748.671] (**) NOUVEAU(0):  Driver mode "1152x864": 81.8 MHz (scaled from 0.0 MHz), 53.8 kHz, 60.0 Hz
[  5748.671] (II) NOUVEAU(0): Modeline "1152x864"x60.0   81.75  1152 1216 1336 1520  864 867 871 897 -hsync +vsync (53.8 kHz e)
[  5748.671] (**) NOUVEAU(0):  Driver mode "1024x768": 63.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 59.9 Hz
[  5748.671] (II) NOUVEAU(0): Modeline "1024x768"x59.9   63.50  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz e)
[  5748.671] (**) NOUVEAU(0):  Driver mode "800x600": 38.2 MHz (scaled from 0.0 MHz), 37.4 kHz, 59.9 Hz
[  5748.671] (II) NOUVEAU(0): Modeline "800x600"x59.9   38.25  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz e)
[  5748.671] (**) NOUVEAU(0):  Driver mode "640x480": 23.8 MHz (scaled from 0.0 MHz), 29.7 kHz, 59.4 Hz
[  5748.671] (II) NOUVEAU(0): Modeline "640x480"x59.4   23.75  640 664 720 800  480 483 487 500 -hsync +vsync (29.7 kHz e)
[  5748.671] (**) NOUVEAU(0):  Driver mode "720x400": 22.2 MHz (scaled from 0.0 MHz), 24.8 kHz, 59.6 Hz
[  5748.671] (II) NOUVEAU(0): Modeline "720x400"x59.6   22.25  720 744 808 896  400 403 413 417 -hsync +vsync (24.8 kHz e)
[  5748.671] (**) NOUVEAU(0):  Driver mode "640x400": 20.0 MHz (scaled from 0.0 MHz), 25.0 kHz, 60.0 Hz
[  5748.671] (II) NOUVEAU(0): Modeline "640x400"x60.0   20.00  640 664 720 800  400 403 409 417 -hsync +vsync (25.0 kHz e)
[  5748.671] (**) NOUVEAU(0):  Driver mode "640x350": 17.5 MHz (scaled from 0.0 MHz), 21.9 kHz, 59.8 Hz
[  5748.671] (II) NOUVEAU(0): Modeline "640x350"x59.8   17.50  640 664 720 800  350 353 363 366 -hsync +vsync (21.9 kHz e)
[  5748.671] (**) NOUVEAU(0): Display dimensions: (350, 190) mm
[  5748.671] (**) NOUVEAU(0): DPI set to (139, 144)
[  5748.671] (II) Loading sub module "fb"
[  5748.671] (II) LoadModule: "fb"
[  5748.671] (II) Loading /usr/lib/xorg/modules/libfb.so
[  5748.671] (II) Module fb: vendor="X.Org Foundation"
[  5748.671] 	compiled for 1.12.4, module version = 1.0.0
[  5748.671] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  5748.671] (II) Loading sub module "exa"
[  5748.671] (II) LoadModule: "exa"
[  5748.671] (II) Loading /usr/lib/xorg/modules/libexa.so
[  5748.672] (II) Module exa: vendor="X.Org Foundation"
[  5748.672] 	compiled for 1.12.4, module version = 2.5.0
[  5748.672] 	ABI class: X.Org Video Driver, version 12.1
[  5748.672] (II) Loading sub module "shadowfb"
[  5748.672] (II) LoadModule: "shadowfb"
[  5748.672] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[  5748.672] (II) Module shadowfb: vendor="X.Org Foundation"
[  5748.672] 	compiled for 1.12.4, module version = 1.0.0
[  5748.672] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  5748.672] (II) UnloadModule: "vesa"
[  5748.672] (II) Unloading vesa
[  5748.672] (II) UnloadModule: "fbdev"
[  5748.672] (II) Unloading fbdev
[  5748.673] (II) UnloadSubModule: "fbdevhw"
[  5748.673] (II) Unloading fbdevhw
[  5748.673] (--) Depth 24 pixmap format is 32 bpp
[  5748.676] (II) NOUVEAU(0): Opened GPU channel 1
[  5748.681] (II) NOUVEAU(0): [DRI2] Setup complete
[  5748.681] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau
[  5748.681] (II) NOUVEAU(0): [DRI2]   VDPAU driver: nouveau
[  5748.681] (II) EXA(0): Driver allocated offscreen pixmaps
[  5748.681] (II) EXA(0): Driver registered support for the following operations:
[  5748.681] (II)         Solid
[  5748.681] (II)         Copy
[  5748.681] (II)         Composite (RENDER acceleration)
[  5748.681] (II)         UploadToScreen
[  5748.681] (II)         DownloadFromScreen
[  5748.681] (==) NOUVEAU(0): Backing store disabled
[  5748.681] (==) NOUVEAU(0): Silken mouse enabled
[  5748.681] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[  5748.682] (II) NOUVEAU(0): [XvMC] Extension initialized.
[  5748.682] (==) NOUVEAU(0): DPMS enabled
[  5748.682] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[  5748.682] (--) RandR disabled
[  5748.682] (II) Initializing built-in extension Generic Event Extension
[  5748.682] (II) Initializing built-in extension SHAPE
[  5748.682] (II) Initializing built-in extension MIT-SHM
[  5748.682] (II) Initializing built-in extension XInputExtension
[  5748.682] (II) Initializing built-in extension XTEST
[  5748.682] (II) Initializing built-in extension BIG-REQUESTS
[  5748.682] (II) Initializing built-in extension SYNC
[  5748.682] (II) Initializing built-in extension XKEYBOARD
[  5748.682] (II) Initializing built-in extension XC-MISC
[  5748.682] (II) Initializing built-in extension SECURITY
[  5748.682] (II) Initializing built-in extension XINERAMA
[  5748.682] (II) Initializing built-in extension XFIXES
[  5748.682] (II) Initializing built-in extension RENDER
[  5748.682] (II) Initializing built-in extension RANDR
[  5748.682] (II) Initializing built-in extension COMPOSITE
[  5748.682] (II) Initializing built-in extension DAMAGE
[  5748.682] (II) SELinux: Disabled on system
[  5748.692] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[  5748.692] (II) AIGLX: enabled GLX_INTEL_swap_event
[  5748.692] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[  5748.692] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[  5748.692] (II) AIGLX: Loaded and initialized nouveau
[  5748.692] (II) GLX: Initialized DRI2 GL provider for screen 0
[  5748.696] (II) NOUVEAU(0): NVEnterVT is called.
[  5748.711] (II) NOUVEAU(0): Setting screen physical size to 508 x 285
[  5748.711] resize called 1920 1080
[  5748.744] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[  5748.744] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  5748.744] (II) LoadModule: "evdev"
[  5748.744] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  5748.744] (II) Module evdev: vendor="X.Org Foundation"
[  5748.745] 	compiled for 1.12.1, module version = 2.7.0
[  5748.745] 	Module class: X.Org XInput Driver
[  5748.745] 	ABI class: X.Org XInput driver, version 16.0
[  5748.745] (II) Using input driver 'evdev' for 'Power Button'
[  5748.745] (**) Power Button: always reports core events
[  5748.745] (**) evdev: Power Button: Device: "/dev/input/event3"
[  5748.745] (--) evdev: Power Button: Vendor 0 Product 0x1
[  5748.745] (--) evdev: Power Button: Found keys
[  5748.745] (II) evdev: Power Button: Configuring as keyboard
[  5748.745] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[  5748.745] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  5748.745] (**) Option "xkb_rules" "evdev"
[  5748.745] (**) Option "xkb_model" "pc105"
[  5748.745] (**) Option "xkb_layout" "de"
[  5748.777] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[  5748.777] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  5748.777] (II) Using input driver 'evdev' for 'Video Bus'
[  5748.777] (**) Video Bus: always reports core events
[  5748.777] (**) evdev: Video Bus: Device: "/dev/input/event5"
[  5748.777] (--) evdev: Video Bus: Vendor 0 Product 0x6
[  5748.777] (--) evdev: Video Bus: Found keys
[  5748.777] (II) evdev: Video Bus: Configuring as keyboard
[  5748.777] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input5/event5"
[  5748.777] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[  5748.777] (**) Option "xkb_rules" "evdev"
[  5748.777] (**) Option "xkb_model" "pc105"
[  5748.777] (**) Option "xkb_layout" "de"
[  5748.778] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[  5748.778] (II) No input driver specified, ignoring this device.
[  5748.778] (II) This device may have been added with another device file.
[  5748.779] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[  5748.779] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[  5748.779] (II) Using input driver 'evdev' for 'Sleep Button'
[  5748.779] (**) Sleep Button: always reports core events
[  5748.779] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[  5748.779] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[  5748.779] (--) evdev: Sleep Button: Found keys
[  5748.779] (II) evdev: Sleep Button: Configuring as keyboard
[  5748.779] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[  5748.779] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[  5748.779] (**) Option "xkb_rules" "evdev"
[  5748.779] (**) Option "xkb_model" "pc105"
[  5748.779] (**) Option "xkb_layout" "de"
[  5748.780] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event13)
[  5748.780] (II) No input driver specified, ignoring this device.
[  5748.780] (II) This device may have been added with another device file.
[  5748.781] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event14)
[  5748.781] (II) No input driver specified, ignoring this device.
[  5748.781] (II) This device may have been added with another device file.
[  5748.781] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event15)
[  5748.781] (II) No input driver specified, ignoring this device.
[  5748.781] (II) This device may have been added with another device file.
[  5748.782] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event16)
[  5748.782] (II) No input driver specified, ignoring this device.
[  5748.782] (II) This device may have been added with another device file.
[  5748.782] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101a (/dev/input/event17)
[  5748.783] (**) Logitech Unifying Device. Wireless PID:101a: Applying InputClass "evdev pointer catchall"
[  5748.783] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:101a'
[  5748.783] (**) Logitech Unifying Device. Wireless PID:101a: always reports core events
[  5748.783] (**) evdev: Logitech Unifying Device. Wireless PID:101a: Device: "/dev/input/event17"
[  5748.783] (--) evdev: Logitech Unifying Device. Wireless PID:101a: Vendor 0x46d Product 0xc52b
[  5748.783] (--) evdev: Logitech Unifying Device. Wireless PID:101a: Found 20 mouse buttons
[  5748.783] (--) evdev: Logitech Unifying Device. Wireless PID:101a: Found scroll wheel(s)
[  5748.783] (--) evdev: Logitech Unifying Device. Wireless PID:101a: Found relative axes
[  5748.783] (--) evdev: Logitech Unifying Device. Wireless PID:101a: Found x and y relative axes
[  5748.783] (II) evdev: Logitech Unifying Device. Wireless PID:101a: Configuring as mouse
[  5748.783] (II) evdev: Logitech Unifying Device. Wireless PID:101a: Adding scrollwheel support
[  5748.783] (**) evdev: Logitech Unifying Device. Wireless PID:101a: YAxisMapping: buttons 4 and 5
[  5748.783] (**) evdev: Logitech Unifying Device. Wireless PID:101a: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  5748.783] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6.1/3-1.6.1:1.2/0003:046D:C52B.0003/input/input17/event17"
[  5748.783] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:101a" (type: MOUSE, id 9)
[  5748.783] (II) evdev: Logitech Unifying Device. Wireless PID:101a: initialized for relative axes.
[  5748.783] (**) Logitech Unifying Device. Wireless PID:101a: (accel) keeping acceleration scheme 1
[  5748.784] (**) Logitech Unifying Device. Wireless PID:101a: (accel) acceleration profile 0
[  5748.784] (**) Logitech Unifying Device. Wireless PID:101a: (accel) acceleration factor: 2.000
[  5748.784] (**) Logitech Unifying Device. Wireless PID:101a: (accel) acceleration threshold: 4
[  5748.784] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101a (/dev/input/mouse1)
[  5748.784] (II) No input driver specified, ignoring this device.
[  5748.784] (II) This device may have been added with another device file.
[  5748.785] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:2010 (/dev/input/event18)
[  5748.785] (**) Logitech Unifying Device. Wireless PID:2010: Applying InputClass "evdev keyboard catchall"
[  5748.785] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:2010'
[  5748.785] (**) Logitech Unifying Device. Wireless PID:2010: always reports core events
[  5748.785] (**) evdev: Logitech Unifying Device. Wireless PID:2010: Device: "/dev/input/event18"
[  5748.785] (--) evdev: Logitech Unifying Device. Wireless PID:2010: Vendor 0x46d Product 0xc52b
[  5748.785] (--) evdev: Logitech Unifying Device. Wireless PID:2010: Found 1 mouse buttons
[  5748.785] (--) evdev: Logitech Unifying Device. Wireless PID:2010: Found scroll wheel(s)
[  5748.785] (--) evdev: Logitech Unifying Device. Wireless PID:2010: Found relative axes
[  5748.785] (II) evdev: Logitech Unifying Device. Wireless PID:2010: Forcing relative x/y axes to exist.
[  5748.785] (--) evdev: Logitech Unifying Device. Wireless PID:2010: Found absolute axes
[  5748.785] (II) evdev: Logitech Unifying Device. Wireless PID:2010: Forcing absolute x/y axes to exist.
[  5748.785] (--) evdev: Logitech Unifying Device. Wireless PID:2010: Found keys
[  5748.785] (II) evdev: Logitech Unifying Device. Wireless PID:2010: Configuring as mouse
[  5748.785] (II) evdev: Logitech Unifying Device. Wireless PID:2010: Configuring as keyboard
[  5748.785] (II) evdev: Logitech Unifying Device. Wireless PID:2010: Adding scrollwheel support
[  5748.785] (**) evdev: Logitech Unifying Device. Wireless PID:2010: YAxisMapping: buttons 4 and 5
[  5748.785] (**) evdev: Logitech Unifying Device. Wireless PID:2010: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  5748.785] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6.1/3-1.6.1:1.2/0003:046D:C52B.0003/input/input18/event18"
[  5748.785] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:2010" (type: KEYBOARD, id 10)
[  5748.785] (**) Option "xkb_rules" "evdev"
[  5748.785] (**) Option "xkb_model" "pc105"
[  5748.786] (**) Option "xkb_layout" "de"
[  5748.786] (II) evdev: Logitech Unifying Device. Wireless PID:2010: initialized for relative axes.
[  5748.786] (WW) evdev: Logitech Unifying Device. Wireless PID:2010: ignoring absolute axes.
[  5748.786] (**) Logitech Unifying Device. Wireless PID:2010: (accel) keeping acceleration scheme 1
[  5748.786] (**) Logitech Unifying Device. Wireless PID:2010: (accel) acceleration profile 0
[  5748.786] (**) Logitech Unifying Device. Wireless PID:2010: (accel) acceleration factor: 2.000
[  5748.786] (**) Logitech Unifying Device. Wireless PID:2010: (accel) acceleration threshold: 4
[  5748.787] (II) config/udev: Adding input device HID 046a:0011 (/dev/input/event21)
[  5748.787] (**) HID 046a:0011: Applying InputClass "evdev keyboard catchall"
[  5748.787] (II) Using input driver 'evdev' for 'HID 046a:0011'
[  5748.787] (**) HID 046a:0011: always reports core events
[  5748.787] (**) evdev: HID 046a:0011: Device: "/dev/input/event21"
[  5748.787] (--) evdev: HID 046a:0011: Vendor 0x46a Product 0x11
[  5748.787] (--) evdev: HID 046a:0011: Found keys
[  5748.787] (II) evdev: HID 046a:0011: Configuring as keyboard
[  5748.787] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6.2/3-1.6.2:1.0/input/input21/event21"
[  5748.787] (II) XINPUT: Adding extended input device "HID 046a:0011" (type: KEYBOARD, id 11)
[  5748.787] (**) Option "xkb_rules" "evdev"
[  5748.787] (**) Option "xkb_model" "pc105"
[  5748.788] (**) Option "xkb_layout" "de"
[  5748.789] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[  5748.789] (II) No input driver specified, ignoring this device.
[  5748.789] (II) This device may have been added with another device file.
[  5748.789] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
[  5748.789] (II) No input driver specified, ignoring this device.
[  5748.789] (II) This device may have been added with another device file.
[  5748.790] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event7)
[  5748.790] (II) No input driver specified, ignoring this device.
[  5748.790] (II) This device may have been added with another device file.
[  5748.790] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event8)
[  5748.790] (II) No input driver specified, ignoring this device.
[  5748.790] (II) This device may have been added with another device file.
[  5748.791] (II) config/udev: Adding input device HDA Intel PCH Line-out (/dev/input/event9)
[  5748.791] (II) No input driver specified, ignoring this device.
[  5748.791] (II) This device may have been added with another device file.
[  5748.791] (II) config/udev: Adding input device HP HD Webcam [Fixed] (/dev/input/event20)
[  5748.791] (**) HP HD Webcam [Fixed]: Applying InputClass "evdev keyboard catchall"
[  5748.791] (II) Using input driver 'evdev' for 'HP HD Webcam [Fixed]'
[  5748.791] (**) HP HD Webcam [Fixed]: always reports core events
[  5748.791] (**) evdev: HP HD Webcam [Fixed]: Device: "/dev/input/event20"
[  5748.792] (--) evdev: HP HD Webcam [Fixed]: Vendor 0x4f2 Product 0xb230
[  5748.792] (--) evdev: HP HD Webcam [Fixed]: Found keys
[  5748.792] (II) evdev: HP HD Webcam [Fixed]: Configuring as keyboard
[  5748.792] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.4/4-1.4:1.0/input/input20/event20"
[  5748.792] (II) XINPUT: Adding extended input device "HP HD Webcam [Fixed]" (type: KEYBOARD, id 12)
[  5748.792] (**) Option "xkb_rules" "evdev"
[  5748.792] (**) Option "xkb_model" "pc105"
[  5748.792] (**) Option "xkb_layout" "de"
[  5748.792] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[  5748.792] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[  5748.792] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[  5748.792] (**) AT Translated Set 2 keyboard: always reports core events
[  5748.792] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[  5748.792] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[  5748.792] (--) evdev: AT Translated Set 2 keyboard: Found keys
[  5748.792] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[  5748.792] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[  5748.792] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[  5748.792] (**) Option "xkb_rules" "evdev"
[  5748.792] (**) Option "xkb_model" "pc105"
[  5748.792] (**) Option "xkb_layout" "de"
[  5748.792] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event12)
[  5748.792] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
[  5748.792] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
[  5748.792] (**) PS/2 Generic Mouse: always reports core events
[  5748.792] (**) evdev: PS/2 Generic Mouse: Device: "/dev/input/event12"
[  5748.792] (--) evdev: PS/2 Generic Mouse: Vendor 0x2 Product 0x1
[  5748.792] (--) evdev: PS/2 Generic Mouse: Found 3 mouse buttons
[  5748.792] (--) evdev: PS/2 Generic Mouse: Found relative axes
[  5748.792] (--) evdev: PS/2 Generic Mouse: Found x and y relative axes
[  5748.792] (II) evdev: PS/2 Generic Mouse: Configuring as mouse
[  5748.792] (**) evdev: PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
[  5748.792] (**) evdev: PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  5748.792] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input12/event12"
[  5748.792] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 14)
[  5748.793] (II) evdev: PS/2 Generic Mouse: initialized for relative axes.
[  5748.793] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
[  5748.793] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
[  5748.793] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[  5748.793] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[  5748.793] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse0)
[  5748.793] (II) No input driver specified, ignoring this device.
[  5748.793] (II) This device may have been added with another device file.
[  5748.793] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event19)
[  5748.793] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[  5748.793] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[  5748.793] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[  5748.793] (II) LoadModule: "synaptics"
[  5748.793] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[  5748.793] (II) Module synaptics: vendor="X.Org Foundation"
[  5748.793] 	compiled for 1.12.4, module version = 1.6.2
[  5748.793] 	Module class: X.Org XInput Driver
[  5748.793] 	ABI class: X.Org XInput driver, version 16.0
[  5748.793] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[  5748.793] (**) SynPS/2 Synaptics TouchPad: always reports core events
[  5748.793] (**) Option "Device" "/dev/input/event19"
[  5748.996] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[  5748.996] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5692
[  5748.996] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4856
[  5748.996] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[  5748.996] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[  5748.996] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
[  5748.996] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[  5748.996] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[  5748.996] (**) SynPS/2 Synaptics TouchPad: always reports core events
[  5748.997] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input19/event19"
[  5748.997] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15)
[  5748.997] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[  5748.997] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[  5748.997] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
[  5748.997] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[  5748.997] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[  5748.997] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[  5748.997] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[  5748.997] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[  5748.998] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2)
[  5748.998] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[  5748.999] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event22)
[  5748.999] (II) No input driver specified, ignoring this device.
[  5748.999] (II) This device may have been added with another device file.
[  5748.999] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[  5748.999] (II) No input driver specified, ignoring this device.
[  5748.999] (II) This device may have been added with another device file.
[  5749.000] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[  5749.000] (II) No input driver specified, ignoring this device.
[  5749.000] (II) This device may have been added with another device file.
[  5749.001] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event11)
[  5749.001] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[  5749.001] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[  5749.001] (**) HP WMI hotkeys: always reports core events
[  5749.001] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event11"
[  5749.001] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[  5749.001] (--) evdev: HP WMI hotkeys: Found keys
[  5749.001] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[  5749.001] (**) Option "config_info" "udev:/sys/devices/virtual/input/input11/event11"
[  5749.001] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 16)
[  5749.001] (**) Option "xkb_rules" "evdev"
[  5749.001] (**) Option "xkb_model" "pc105"
[  5749.001] (**) Option "xkb_layout" "de"
[  5749.002] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event23)
[  5749.002] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[  5749.002] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[  5749.002] (**) ACPI Virtual Keyboard Device: always reports core events
[  5749.002] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event23"
[  5749.002] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0
[  5749.002] (--) evdev: ACPI Virtual Keyboard Device: Found keys
[  5749.002] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard
[  5749.003] (**) Option "config_info" "udev:/sys/devices/virtual/input/input23/event23"
[  5749.003] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 17)
[  5749.003] (**) Option "xkb_rules" "evdev"
[  5749.003] (**) Option "xkb_model" "pc105"
[  5749.003] (**) Option "xkb_layout" "de"
[  5749.217] (II) NOUVEAU(0): EDID vendor "LGD", prod id 601
[  5749.217] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[  5749.217] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  138.50  1920 1968 2000 2080  1080 1083 1088 1111 -hsync -vsync (66.6 kHz eP)
[  5749.724] (II) NOUVEAU(0): EDID vendor "LGD", prod id 601
[  5749.724] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[  5749.724] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  138.50  1920 1968 2000 2080  1080 1083 1088 1111 -hsync -vsync (66.6 kHz eP)

Sollte ich mal den proprietären NVIDIA-Treiber installieren?

[KloBoBBerLe]

Ich habe vorhin das System noch einmal neu aufgesetzt (dank Clonezilla war Windows schnell zurückgespielt):

Nach dem Ausführen von autoclean, autoremove und clean existiert das gleiche Problem wieder. Welche Datei könnte es da denn zerlegt haben?

[CH777]

Sollte ich mal den proprietären NVIDIA-Treiber installieren?

Ja, das solltest du.
Der nouveau-Treiber ist leider noch nicht stabil.

[debianoli]

Nachtrag:

Bei Eingabe von startx gelange ich wie gewöhnlich in die grafische Oberfläche.

das hört sich für mich nach einem kaputten Display-Manager an. Was nutzt du denn zum Einloggen? GDM, KDM etc?

zum suchen (als Root):

Code: Alles auswählen

dpkg -l | grep 'Display Manager'

[KloBoBBerLe]

Vielen Dank für Eure Hilfe!

Was nutzt du denn zum Einloggen? GDM, KDM etc?

zum suchen (als Root):

Code: Alles auswählen

dpkg -l | grep 'Display Manager'

libxdmcp6:amd64

Also ist es XDM, richtig?

[NAB]

Nach dem Ausführen von autoclean, autoremove und clean existiert das gleiche Problem wieder. Welche Datei könnte es da denn zerlegt haben?

Ich weiß nicht genau, wie du das hinbekommen hast, aber es klingt genau so, als ob du dir dabei deinen Displaymanager deinstalliert hast.
(das kann man hinbekommen, wenn man abwechselnd apt-get und aptitude benutzt)

Wenn du Gnome benutzt, wäre der passende Displaymanager der GDM.
(für KDE wäre es der kdm)

Dagegen hilft ein einfaches

Code: Alles auswählen

apt-get install gdm3

Der Nouveau-Treiber funktioniert bei dir prächtig, du musst also nicht unbedingt den Nvidia-Treiber nutzen. Der Nvidia-Treiber bietet dir aber eine funktionierende Lüftersteuerung und bessere 3D-Leistung. Das hat aber nichts mit diesem Problem zu tun.

[uname]

Paket nennt sich nun gdm3.

[NAB]

Mist ... wo du recht hast ...
Hab's oben mal geändert.

[joahlen]

lightdm würde woht besser passen. Mit GDM3 holt man sich ein halbes Gnome.

JO

[NAB]

lightdm würde woht besser passen. Mit GDM3 holt man sich ein halbes Gnome.

Hast recht ... ich hab das LXDE oben überlesen und bin von Gnome als Default-Einstellung ausgegangen.

Aber ich werd da nicht recht schlau draus ... welchen Display-Manager installiert denn Debian, wenn man LXDE bei der Installation als Desktop wählt?

apt sagt, lightdm (oder x-display-manager) stehen nur auf der Recommends-Liste von "lxde". (beim KDE ist es genau so, da steht der KDM auch nur in den Recommends, bei Gnome hingegen steht der gdm3 in den Depends).

[uname]

xdm und slim wären noch Alternativen.

[debianoli]

libxdmcp6:amd64

Also ist es XDM, richtig?

Sieht so aus, als wäre gar kein Display-Mamager installiert.

Code: Alles auswählen

apt-get install xdm

installiert dir dann zB den xdm. Wenn es dann immer noch nicht klappt, könnten noch iregndwelchen .xresources in deinem User-home rumschwirren.

[KloBoBBerLe]

Hey Jungs,

erst mal herzlichen Dank für Eure freundliche Hilfe!

Die Idee mit gdm3 hatte ein Kumpel gestern auch, ich hatte dann aber noch rechtzeitig gelesen dass es sich um den Gnome-Manager handelt.

Ich habe Debian jetzt neu installiert und habe mir noch die offiziellen Testing-Quellen mit in die sources.list gepackt. Nach der Installation von xdm sollte ich anwählen, ob ich künftig lightdm oder xdm als Display-Manager nutzen möchte. Der ursprüngliche Display-Manager scheint also lightdm gewesen zu sein, ich habe mich nun aber für xdm entschieden.

Dennoch traue ich mich gerade nicht, autoclean, autoremove und clean auszuführen. Oder meint Ihr, dass da nun kein Risiko mehr besteht? Selbst wenn einer der drei Befehle den lightdm irgendwie zerstören sollte dürfte mir ja prinzipiell nichts mehr passieren, da ich nun xdm nutze...

Viele Grüße
KloBoBBerLe

[uname]

Wenn du die Befehle nicht probierst wirst du nie den Fehler finden. Zudem sollte "apt-get" noch fragen. Poste doch mal die Ausgaben ... und wenn es daneben geht suchst du den Fehler oder nutzt weiter das Windows-Prinzip: nicht verstehen und neu installieren.

[NAB]

Dennoch traue ich mich gerade nicht, autoclean, autoremove und clean auszuführen. Oder meint Ihr, dass da nun kein Risiko mehr besteht? Selbst wenn einer der drei Befehle den lightdm irgendwie zerstören sollte dürfte mir ja prinzipiell nichts mehr passieren, da ich nun xdm nutze...

Es ist ja nicht so, dass "autoremove" wahllos irgendwelche Pakete entfernt. Wenn ich z.B. "Brasero" zum DVD-Brennen ausprobieren will und mir das installiere, dann zieht diese Installation zig Pakete aus dem Gnome Desktop nach sich. Wenn ich Brasero danach blöd finde und es deinstalliere, sind die Gnome-Pakete immer noch auf dem Rechner, obwohl kein Programm sie mehr braucht. Diese Pakete versucht dann "autoremove" zu identifizieren. Wenn ich mich zwischendurch an ein anderes Gnome-Programm gewöhnt habe und das eigentlich trotzdem ganz klasse finde, merkt "autoremove" das nicht und haut mir das Paket trotzdem vom Rechner.

Hätte ich vorher ein "apt-get install <Paket>" ausgeführt, so hätte sich der Status des Paketes geändert, von "automatic install" zu "manual install". Wenn es auf "manual install" steht, wird das Paket (und alle seine Abhängigkeiten) von "autoremove" nicht mehr entfernt.

Die Lösung deines Problems wäre also gewesen, ein "apt-get install lightdm" auszuführen, obwohl das Paket schon installiert ist. Danach wäre es vor "autoremove" sicher gewesen.

Das ist kein Fehler im Paket "lightdm" sondern kann den xdm genau so treffen. Der Fehler dürfte im Paket LXDE liegen, das keinen Display-Manager zwingend voraussetzt. Aber wenn man einen Debian-Entwickler dazu fragt, wird der vermutlich sagen "Ja, wieso, man braucht doch auch keinen Display-Manager, es geht doch auch mit xinit.".

[uname]

Etwas offtopic:
Statt "autoremove" kann man auch das Programm deborphon nutzen, um mal Müll zu entsorgen. Das ist etwas zuverlässiger und löscht mehr weg.

Code: Alles auswählen

apt-get remove --purge $(deborphan |tr '\n' ' ')

[rendegast]

Und außerdem kann apt-get / aptitude auch mit '-s | --simulate' ausprobiert werden.

[debianoli]

Ich habe Debian jetzt neu installiert und habe mir noch die offiziellen Testing-Quellen mit in die sources.list gepackt.

Die Testing-Quellen würde ich an deiner Stelle auskommentieren und erst mal bei stable/wheezy bleiben. Sonst passiert dir so etwas öfters...

[KloBoBBerLe]

Herzlichen Dank für Eure Hilfe!

Das Problem war wohl unter anderem, dass ich mich auf den grafischen Editor der sources.list verlassen hatte, anstatt diese Datei direkt per Leafpad zu bearbeiten. Dementsprechend hat es mir Wheezy und Testing-Quellen bunt durcheinander gemischt, was zu massiven Problemen mit der Paketverwaltung führte.

Nach einer kompletten Neuinstallation und der manuellen Bearbeitung von sources.list funktioniert nun alles richtig, und auch autoclean und autoremove fügen dem Anmeldefenster keinen Schaden mehr hinzu...