Ich habe einen Laptop (Acer Aspire V3-771G). Er besitzt das neue UEFI-Bios...leider.
Nachdem ich nun Windows 8 runtergeschmissen habe, versuche ich Debian zu installieren (Wheezy/Testing).
Dabei habe ich nur die minimale Installation ausgewählt, also nur Standart-Pakete.
Nachdem nun beim ersten Hochfahren die Bootnachrichten nur so durchrauschen, war der Bildschirm auf einmal schwarz. Dies ging alles so schnell, dass keine Fehlermeldung zu erkennen war. Also die gesamte Installation nochmal, diesmal aber SSH mitinstalliert. Jetzt kann ich euch wenigstens mal die Ausgabe von dmesg pasten.
Code: Alles auswählen
[ 1.115794] hub 1-0:1.0: USB hub found
[ 1.115799] hub 1-0:1.0: 2 ports detected
[ 1.115882] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.115886] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.115893] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.115917] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.119799] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.119815] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xd3618000
[ 1.135577] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.135626] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.135629] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.135631] usb usb2: Product: EHCI Host Controller
[ 1.135633] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 1.135635] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.135783] hub 2-0:1.0: USB hub found
[ 1.135787] hub 2-0:1.0: 2 ports detected
[ 1.135849] ahci 0000:00:1f.2: version 3.0
[ 1.135923] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 1.151600] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[ 1.151604] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 1.151609] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.160185] scsi0 : ahci
[ 1.160338] scsi1 : ahci
[ 1.160438] scsi2 : ahci
[ 1.160562] scsi3 : ahci
[ 1.160658] scsi4 : ahci
[ 1.160785] scsi5 : ahci
[ 1.160841] ata1: SATA max UDMA/133 abar m2048@0xd3617000 port 0xd3617100 irq 41
[ 1.160844] ata2: DUMMY
[ 1.160848] ata3: SATA max UDMA/133 abar m2048@0xd3617000 port 0xd3617200 irq 41
[ 1.160850] ata4: DUMMY
[ 1.160851] ata5: DUMMY
[ 1.160852] ata6: DUMMY
[ 1.160954] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 1.160957] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.160965] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.161067] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.161081] xhci_hcd 0000:00:14.0: irq 21, io mem 0xd3600000
[ 1.161137] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
[ 1.161195] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.161197] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.161199] usb usb3: Product: xHCI Host Controller
[ 1.161200] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
[ 1.161201] usb usb3: SerialNumber: 0000:00:14.0
[ 1.161275] xHCI xhci_add_endpoint called for root hub
[ 1.161278] xHCI xhci_check_bandwidth called for root hub
[ 1.161311] hub 3-0:1.0: USB hub found
[ 1.161320] hub 3-0:1.0: 4 ports detected
[ 1.161375] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.161379] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.161394] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.161396] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.161397] usb usb4: Product: xHCI Host Controller
[ 1.161399] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
[ 1.161400] usb usb4: SerialNumber: 0000:00:14.0
[ 1.161461] xHCI xhci_add_endpoint called for root hub
[ 1.161463] xHCI xhci_check_bandwidth called for root hub
[ 1.161494] hub 4-0:1.0: USB hub found
[ 1.161503] hub 4-0:1.0: 4 ports detected
[ 1.216436] atl1c 0000:0e:00.0: version 1.0.1.0-NAPI
[ 1.427211] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.479138] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.480674] ata3.00: ATAPI: MATSHITADVD-RAM UJ8C0, 1.00, max UDMA/133
[ 1.481902] ata3.00: configured for UDMA/133
[ 1.487204] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.489687] ata1.00: ATA-8: WDC WD5000BPVT-22HXZT3, 01.01A01, max UDMA/133
[ 1.489694] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.492305] ata1.00: configured for UDMA/133
[ 1.492518] scsi 0:0:0:0: Direct-Access ATA WDC WD5000BPVT-2 01.0 PQ: 0 ANSI: 5
[ 1.494156] scsi 2:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8C0 1.00 PQ: 0 ANSI: 5
[ 1.497903] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.497907] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.497938] sd 0:0:0:0: [sda] Write Protect is off
[ 1.497941] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.497952] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.501732] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.501738] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.501907] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.559490] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.559496] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.559869] hub 1-1:1.0: USB hub found
[ 1.559948] hub 1-1:1.0: 6 ports detected
[ 1.573457] sda: sda1 sda2 sda3 sda4 sda5 sda6
[ 1.574380] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.575761] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.575808] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 1.670903] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 1.803010] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.803017] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.803293] hub 2-1:1.0: USB hub found
[ 1.803379] hub 2-1:1.0: 8 ports detected
[ 1.870613] Refined TSC clocksource calibration: 2494.334 MHz.
[ 1.870617] Switching to clocksource tsc
[ 1.874669] usb 1-1.1: new high-speed USB device number 3 using ehci_hcd
[ 2.022886] usb 1-1.1: New USB device found, idVendor=1bcf, idProduct=2c18
[ 2.022893] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.022897] usb 1-1.1: Product: HD WebCam
[ 2.022899] usb 1-1.1: Manufacturer: NC.21411.00X23706E3DLM0009
[ 2.162325] usb 1-1.2: new low-speed USB device number 4 using ehci_hcd
[ 2.263456] usb 1-1.2: New USB device found, idVendor=1241, idProduct=1166
[ 2.263462] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.273655] input: HID 1241:1166 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input1
[ 2.273733] generic-usb 0003:1241:1166.0001: input,hidraw0: USB HID v1.10 Mouse [HID 1241:1166] on usb-0000:00:1a.0-1.2/input0
[ 2.273744] usbcore: registered new interface driver usbhid
[ 2.273746] usbhid: USB HID core driver
[ 2.334104] usb 2-1.6: new full-speed USB device number 3 using ehci_hcd
[ 2.427945] usb 2-1.6: string descriptor 0 read error: -22
[ 2.428021] usb 2-1.6: New USB device found, idVendor=04ca, idProduct=3006
[ 2.428024] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.897629] PM: Starting manual resume from disk
[ 2.897632] PM: Hibernation image partition 8:3 present
[ 2.897634] PM: Looking for hibernation image.
[ 2.897922] PM: Image not found (code -22)
[ 2.897925] PM: Hibernation image not present or could not be loaded.
[ 2.989430] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 4.379687] udevd[368]: starting version 175
[ 4.536030] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0C:00/input/input2
[ 4.536036] ACPI: Power Button [PWRB]
[ 4.536077] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0E:00/input/input3
[ 4.536080] ACPI: Sleep Button [SLPB]
[ 4.536119] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[ 4.537525] ACPI: Requesting acpi_cpufreq
[ 4.543253] ACPI: Lid Switch [LID]
[ 4.543301] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 4.543305] ACPI: Power Button [PWRF]
[ 4.623219] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 4.750280] ACPI: resource 0000:00:1f.3 [io 0x5040-0x505f] conflicts with ACPI region SMBI [io 0x5040-0x504f]
[ 4.750283] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.794835] wmi: Mapper loaded
[ 4.815528] iTCO_vendor_support: vendor-support=0
[ 4.831633] Linux media interface: v0.10
[ 4.869742] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 4.869819] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 4.870055] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.876473] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 5.004992] [drm] Initialized drm 1.1.0 20060810
[ 5.006688] ACPI: AC Adapter [AC0] (on-line)
[ 5.020801] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f01)
[ 5.047269] rts_pstor: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.048433] Initializing Realtek PCIE storage driver...
[ 5.048536] Resource length: 0x1000
[ 5.048569] Original address: 0xd1000000, remapped address: 0xffffc9000005e000
[ 5.048574] pci->irq = 16
[ 5.048576] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 16
[ 5.048595] rts_pstor 0000:07:00.0: setting latency timer to 64
[ 5.059608] psmouse serio1: elantech: Synaptics capabilities query result 0x79, 0x15, 0x0c.
[ 5.103837] cfg80211: Calling CRDA to update world regulatory domain
[ 5.134998] ACPI: Battery Slot [BAT0] (battery present)
[ 5.150620] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input7
[ 5.151610] Linux video capture interface: v2.00
[ 5.192415] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c18)
[ 5.195889] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 5.195925] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 5.201245] input: HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input8
[ 5.201291] usbcore: registered new interface driver uvcvideo
[ 5.201292] USB Video Class driver (1.1.1)
[ 5.213513] Bluetooth: Core ver 2.16
[ 5.213528] NET: Registered protocol family 31
[ 5.213530] Bluetooth: HCI device and connection manager initialized
[ 5.213532] Bluetooth: HCI socket layer initialized
[ 5.213533] Bluetooth: L2CAP socket layer initialized
[ 5.213538] Bluetooth: SCO socket layer initialized
[ 5.250457] scsi6 : SCSI emulation for PCI-Express Mass Storage devices
[ 5.250537] rts_pstor: waiting for device to settle before scanning
[ 5.263723] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 5.263891] acer_wmi: Function bitmap for Communication Button: 0x801
[ 5.264008] acer_wmi: Brightness must be controlled by generic video driver
[ 5.280932] acer_wmi: Enabling Launch Manager failed: 0xe2 - 0x0
[ 5.280976] input: Acer WMI hotkeys as /devices/virtual/input/input9
[ 5.299227] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[ 5.299253] nouveau 0000:01:00.0: power state changed by ACPI to D0
[ 5.299256] nouveau 0000:01:00.0: power state changed by ACPI to D0
[ 5.299259] nouveau 0000:01:00.0: enabling device (0006 -> 0007)
[ 5.299393] nouveau 0000:01:00.0: setting latency timer to 64
[ 5.299411] [drm] nouveau 0000:01:00.0: Detected an NVe0 generation card (0x0e7110a2)
[ 5.301228] checking generic (c0000000 130000) vs hw (a0000000 10000000)
[ 5.301230] checking generic (c0000000 130000) vs hw (b0000000 2000000)
[ 5.304734] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
[ 5.352807] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[ 5.352809] [drm] nouveau 0000:01:00.0: Checking PROM for VBIOS
[ 5.352863] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[ 5.352865] [drm] nouveau 0000:01:00.0: Checking ACPI for VBIOS
[ 5.379978] ath9k 0000:0d:00.0: setting latency timer to 64
[ 5.391739] ath: EEPROM regdomain: 0x6a
[ 5.391740] ath: EEPROM indicates we should expect a direct regpair map
[ 5.391742] ath: Country alpha2 being used: 00
[ 5.391743] ath: Regpair used: 0x6a
[ 5.400974] Error: Driver 'pcspkr' is already registered, aborting...
[ 5.419202] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 5.419562] usbcore: registered new interface driver btusb
[ 5.449370] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 5.449869] Registered led device: ath9k-phy0
[ 5.449879] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffc9000cd80000, irq=17
[ 5.807809] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[ 5.908827] HDMI status: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=0
[ 5.909040] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 5.909323] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 5.909490] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 6.249062] rts_pstor: device scan complete
[ 6.249289] scsi 6:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
[ 6.249383] Bad LUN (0:1)
[ 6.249581] Bad target number (1:0)
[ 6.249783] Bad target number (2:0)
[ 6.249985] Bad target number (3:0)
[ 6.250187] Bad target number (4:0)
[ 6.250392] Bad target number (5:0)
[ 6.250598] Bad target number (6:0)
[ 6.250731] Bad target number (7:0)
[ 6.251055] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 6.251521] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 6.407365] [drm] nouveau 0000:01:00.0: ... BIOS checksum invalid
[ 6.407372] [drm] nouveau 0000:01:00.0: Checking PCIROM for VBIOS
[ 6.407536] nouveau 0000:01:00.0: Invalid ROM contents
[ 6.407838] [drm] nouveau 0000:01:00.0: ... BIOS checksum invalid
[ 6.407841] [drm] nouveau 0000:01:00.0: Using VBIOS from ACPI
[ 6.407847] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 6.407852] [drm] nouveau 0000:01:00.0: Bios version 80.07.24.00
[ 6.407858] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[ 6.408203] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
[ 6.408207] [drm] nouveau 0000:01:00.0: DCB version 4.0
[ 6.415308] checking generic (c0000000 130000) vs hw (c0000000 10000000)
[ 6.415315] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[ 6.415346] Console: switching to colour dummy device 80x25
[ 6.416976] i915 0000:00:02.0: setting latency timer to 64
[ 6.496255] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 6.496265] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.496268] [drm] Driver supports precise vblank timestamp query.
[ 6.496361] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
[ 6.496417] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
[ 6.496424] vga_switcheroo: enabled
[ 6.497003] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 6.497008] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[ 6.556603] [drm] failed to retrieve link info, disabling eDP
[ 6.946901] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 7.331941] fbcon: inteldrmfb (fb0) is primary device
[ 7.563434] HDMI hot plug event: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1
[ 7.563497] HDMI status: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1
[ 7.790231] Console: switching to colour frame buffer device 240x67
[ 7.804631] fb0: inteldrmfb frame buffer device
[ 7.804634] drm: registered panic notifier
[ 7.805003] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20110623/video-1161)
[ 7.805569] acpi device:38: registered as cooling_device4
[ 7.805884] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:36/LNXVIDEO:00/input/input14
[ 7.805991] ACPI: Video Device [PEGP] (multi-head: no rom: yes post: no)
[ 7.820709] acpi device:44: registered as cooling_device5
[ 7.821326] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input15
[ 7.821420] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 7.821454] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 7.862968] HDMI status: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1
[ 7.866491] HDMI: detected monitor CVTE TV at connection type HDMI
[ 7.866495] HDMI: available speakers: FL/FR
[ 7.866501] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[ 8.340633] Adding 1952764k swap on /dev/sda3. Priority:-1 extents:1 across:1952764k
[ 8.346358] EXT4-fs (sda4): re-mounted. Opts: (null)
[ 8.877204] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro
[ 9.007052] loop: module loaded
[ 10.551301] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 10.674649] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 10.830471] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 10.912446] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 12.189602] RPC: Registered named UNIX socket transport module.
[ 12.189605] RPC: Registered udp transport module.
[ 12.189607] RPC: Registered tcp transport module.
[ 12.189608] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 12.200993] atl1c 0000:0e:00.0: irq 45 for MSI/MSI-X
[ 12.201225] atl1c 0000:0e:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 12.223528] FS-Cache: Loaded
[ 12.257966] FS-Cache: Netfs 'nfs' registered for caching
[ 12.265272] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 22.579819] eth0: no IPv6 routers present
Für jeden Hinweis wäre ich dankbar.
PS: Dieser Thread hat mir nicht geholfen, also vga=normal
