openssh-server error

Du kommst mit der Installation nicht voran oder willst noch was nachfragen? Schau auch in den "Tipps und Tricks"-Bereich.
Antworten
Benutzeravatar
mosa
Beiträge: 324
Registriert: 29.10.2004 09:53:35

openssh-server error

Beitrag von mosa » 07.11.2011 13:00:16

Vor einem Monat wurde Debian Squezze installiert, nun wollte ich den openssh-server installieren.
root@roos:~# apt-get upgrade
root@roos:~# apt-get install openssh-server, dann kam dies:

Code: Alles auswählen

Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut       
Statusinformationen werden eingelesen... Fertig
0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
1 nicht vollständig installiert oder entfernt.
Nach dieser Operation werden 0 B Plattenplatz zusätzlich benutzt.
Möchten Sie fortfahren [J/n]? j
openssh-server (1:5.5p1-6+squeeze1) wird eingerichtet ...
insserv: warning: script 'K01nxsensor' missing LSB tags and overrides
insserv: warning: script 'K01nxserver' missing LSB tags and overrides
insserv: warning: script 'nxsensor' missing LSB tags and overrides
insserv: warning: script 'nxserver' missing LSB tags and overrides
insserv: There is a loop at service nxsensor if started
insserv: Starting nxsensor depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxserver depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxsensor depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxserver depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxsensor depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxserver depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxsensor depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxserver depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxsensor depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxserver depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxsensor depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxserver depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxsensor depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxserver depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxsensor depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxserver depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxsensor depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxserver depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxsensor depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxserver depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxsensor depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxserver depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxsensor depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxserver depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxsensor depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxserver depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxsensor depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxserver depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxsensor depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxserver depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxsensor depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxserver depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxsensor depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxserver depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxsensor depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxserver depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxsensor depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxserver depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxsensor depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxserver depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxsensor depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxserver depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxsensor depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxserver depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxsensor depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxserver depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxsensor depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxserver depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxsensor depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxserver depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxsensor depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxserver depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxsensor depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxserver depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxsensor depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxserver depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxsensor depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxserver depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxsensor depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxserver depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxsensor depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxserver depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxsensor depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxserver depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxsensor depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxserver depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxsensor depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxserver depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxsensor depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxserver depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxsensor depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxserver depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxsensor depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxserver depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxsensor depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxserver depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxsensor depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxserver depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxsensor depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxserver depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxsensor depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxserver depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxsensor depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxserver depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxsensor depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxserver depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxsensor depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxserver depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxsensor depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Starting nxserver depends on plymouth and therefore on system facility `$all' which can not be true!
insserv: Max recursions depth 99 reached
insserv: There is a loop between service plymouth and mountnfs-bootclean if started
insserv:  loop involving service mountnfs-bootclean at depth 9
insserv:  loop involving service mountnfs at depth 8
insserv: There is a loop between service plymouth and mountall if started
insserv:  loop involving service mountall at depth 4
insserv:  loop involving service checkfs at depth 3
insserv:  loop involving service networking at depth 6
insserv:  loop involving service alsa-utils at depth 12
insserv: There is a loop between service plymouth and mountoverflowtmp if started
insserv:  loop involving service mountoverflowtmp at depth 8
insserv:  loop involving service mountall-bootclean at depth 7
insserv: There is a loop between service plymouth and checkroot if started
insserv:  loop involving service checkroot at depth 3
insserv:  loop involving service hdparm at depth 2
insserv:  loop involving service cryptdisks-early at depth 4
insserv: There is a loop between service plymouth and checkroot if started
insserv:  loop involving service hostname at depth 4
insserv:  loop involving service module-init-tools at depth 6
insserv: There is a loop between service nxsensor and ifupdown-clean if started
insserv:  loop involving service ifupdown-clean at depth 6
insserv: There is a loop between service nxsensor and mountdevsubfs if started
insserv:  loop involving service mountdevsubfs at depth 2
insserv:  loop involving service udev at depth 1
insserv:  loop involving service kbd at depth 11
insserv: There is a loop between service plymouth and mountnfs if started
insserv:  loop involving service bootlogd at depth 4
insserv:  loop involving service nxsensor at depth 1
insserv:  loop involving service nfs-common at depth 16
insserv: exiting now without changing boot order!
update-rc.d: error: insserv rejected the script header
dpkg: Fehler beim Bearbeiten von openssh-server (--configure):
 Unterprozess installiertes post-installation-Skript gab den Fehlerwert 1 zurück
configured to not write apport reports
                                      Fehler traten auf beim Bearbeiten von:
 openssh-server
E: Sub-process /usr/bin/dpkg returned an error code (1)
root@roos:~#

syssi
Beiträge: 2951
Registriert: 24.12.2010 16:50:59
Lizenz eigener Beiträge: MIT Lizenz
Wohnort: Rheinland

Re: openssh-server error

Beitrag von syssi » 07.11.2011 14:04:58

Ist es moeglich, dass der nxserver aus einem drittanbieter Repository installiert wurde? Wenn du den nxserver deinstallierst sollte sich das Problem loesen.

Benutzeravatar
mosa
Beiträge: 324
Registriert: 29.10.2004 09:53:35

Re: openssh-server error

Beitrag von mosa » 07.11.2011 14:11:31

:hail: syssi
hatte die nx-dateien noch von der lenny installation.
Möglicherweise sind sie mit squezze nicht mehr kompatibel.
Auf jeden Fall ist die Fehlermeldung vom openssh-server jetzt ok.
Danke

Cae
Beiträge: 6349
Registriert: 17.07.2011 23:36:39
Wohnort: 2130706433

Re: openssh-server error

Beitrag von Cae » 07.11.2011 17:37:16

mosa hat geschrieben:

Code: Alles auswählen

insserv: warning: script 'K01nxsensor' missing LSB tags and overrides
insserv: warning: script 'K01nxserver' missing LSB tags and overrides
insserv: warning: script 'nxsensor' missing LSB tags and overrides
insserv: warning: script 'nxserver' missing LSB tags and overrides
insserv: There is a loop at service nxsensor if started
Die alten Scripte haben keine LSB-Tags. Sehr wichtig, damit insserv sie gescheit sortieren kann. Im vorliegenden Fall erwartet ein Script, dass ein anderes gestartet wird, welches wiederum auf das erste aufbaut. Das wird natürlich nix.
Also schreib' da passende LSD-Tags rein und mach' dann update-rc.d <scriptname> remove und update-rc.d <scriptname> defaults.

Gruß Cae
If universal surveillance were the answer, lots of us would have moved to the former East Germany. If surveillance cameras were the answer, camera-happy London, with something like 500,000 of them at a cost of $700 million, would be the safest city on the planet.

—Bruce Schneier

Antworten