Nu kann ich nicht mehr senden: Fehler hylafax CAPI not installed or act
Empfangen geht.
Code: Alles auswählen
fax:~# faxstat -s
HylaFAX scheduler on localhost.localdomain: Running
Modem faxCAPI (+49.xxx.xxxxx): Running and idle
Code: Alles auswählen
fax:~# capiinfo
Number of Controllers : 1
Controller 1:
Manufacturer: AVM GmbH
CAPI Version: 2.0
Manufacturer Version: 3.10-02 (49.2)
Serial Number: 0206126
BChannels: 2
Global Options: 0x00000039
internal controller supported
DTMF supported
Supplementary Services supported
channel allocation supported (leased lines)
B1 protocols support: 0x4000001f
64 kbit/s with HDLC framing
64 kbit/s bit-transparent operation
V.110 asynconous operation with start/stop byte framing
V.110 synconous operation with HDLC framing
T.30 modem for fax group 3
B2 protocols support: 0x00000b1b
ISO 7776 (X.75 SLP)
Transparent
LAPD with Q.921 for D channel X.25 (SAPI 16)
T.30 for fax group 3
ISO 7776 (X.75 SLP) with V.42bis compression
V.120 asyncronous mode
V.120 bit-transparent mode
B3 protocols support: 0x8000003f
Transparent
T.90NL, T.70NL, T.90
ISO 8208 (X.25 DTE-DTE)
X.25 DCE
T.30 for fax group 3
T.30 for fax group 3 with extensions
0100
0200
39000000
1f000040
1b0b0000
3f000080
00000000 00000000 00000000 00000000 00000000 00000000
01000001 00010000 00000000 00000000 00000000
Supplementary services support: 0x000003ff
Hold / Retrieve
Terminal Portability
ECT
3PTY
Call Forwarding
Call Deflection
MCID
CCBS
Wo muss ich ansetzen?
Gruß
Sammlerjaeger
