ich krieg´ hier noch die Krise
Beim Versuch 64studio (eine erweiterte etch-Distro) auf meinem Rechner zu installieren bekomme ich das altbekannte Problem, daß er zwar den Installer startet, aber nicht in der Lage ist das CD-ROM-LW zu mounten. Ein wenig befremdlich, denn eine recht aktuelle ubuntu (9.10) Installation ging ohne Probleme von statten - und ubuntu ist ja schließlich auch debian-basiert, however ...
Nachdem ich alle verfügbaren Tips aus dem Netz bzgl. BIOS-Einstellungen zu SATA/IDE/AHCI ausprobiert habe, würde ich jetzt gerne versuchen mit modprobe während der Installationen einen CD-ROM Treiber explizit zu laden (als Auswahl bekomme ich zur Zeit nur "none" und "cdrom" angezeigt - überflüssig zu erwähnen, daß beide nicht funktionieren).
Allerdings habe ich überhaupt keinen Plan von dem ganzen "modeprobe-Geraffel", insbesondere wüßte ich gar nicht wie denn so ein Treiber heißen soll, wo ich den herbekomme, wie ich den richtigen herausfinden kann.
Kann mir da vielleicht jemand helfen?
Ich habe hier ein NEC-DVD ROM (IDE, master) sowie ein OPTIARC DVD-RW (IDE, slave) am einzigen IDE-Port meines ASrock P45X3 Deluxe angeschlossen. Beide LWs haben auch in der Vergangenheit (mit ubuntu 8.04 ff. und Win-XP) nie irgendwelche Probleme bereitet, allerdings war´s früher ein anderes Mainboard -> also ist der Boardwechsel offensichtlich ein Teil der Ursache. Die Distro-DVD ist OK, auf meinem Thinkpad fluppt alles soweit. Außerdem gibt es zwei HITACHI- und eine SAMSUNG-SATA-Disks.
Wenn noch weitere Info´s benötigt werden, kann ich die gerne liefern. Ich hänge schonmal die Ausgabe von dmesg aus meinem ubuntu 10.04 an, vielleicht hilfts ja schon mal ein bischen. Wie ich allerdings die logs oder config-files aus dem Installationssystem speichern kann ist mir ein Rätsel ... sollte ja vielleicht über einen USB-Stick gehen, oder?
Vielen Dank im voraus!
k0erschgen
dmesg (mußte ich leider ein wenig kürzen, wg. der 50000 Zeichengrenze)
Code: Alles auswählen
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000097800 (usable)
[ 0.000000] BIOS-e820: 0000000000097800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffa0000 (usable)
[ 0.000000] BIOS-e820: 000000007ffa0000 - 000000007ffb0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ffb0000 - 000000007fff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x7ffa0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 0000000000097800 (usable)
[ 0.000000] modified: 0000000000097800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007ffa0000 (usable)
[ 0.000000] modified: 000000007ffa0000 - 000000007ffb0000 (ACPI data)
[ 0.000000] modified: 000000007ffb0000 - 000000007fff0000 (ACPI NVS)
[ 0.000000] modified: 000000007fff0000 - 0000000080000000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[ 0.000000] RAMDISK: 37856000 - 37fef46a
[ 0.000000] Allocated new RAMDISK: 008de000 - 0107746a
[ 0.000000] Move RAMDISK from 0000000037856000 - 0000000037fef469 to 008de000 - 01077469
[ 0.000000] ACPI: RSDP 000f9b00 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 7ffa0000 0003C (v01 072709 RSDT1052 20090727 MSFT 00000097)
[ 0.000000] ACPI: FACP 7ffa0200 00084 (v01 A M I OEMFACP 12000601 MSFT 00000097)
[ 0.000000] ACPI: DSDT 7ffa0440 0635F (v01 AS225 AS225114 00000114 INTL 20051117)
[ 0.000000] ACPI: FACS 7ffb0000 00040
[ 0.000000] ACPI: APIC 7ffa0390 0006C (v01 072709 APIC1052 20090727 MSFT 00000097)
[ 0.000000] ACPI: MCFG 7ffa0400 0003C (v01 072709 OEMMCFG 20090727 MSFT 00000097)
[ 0.000000] ACPI: OEMB 7ffb0040 00073 (v01 072709 OEMB1052 20090727 MSFT 00000097)
[ 0.000000] ACPI: AAFT 7ffa8440 00027 (v01 072709 OEMAAFT 20090727 MSFT 00000097)
[ 0.000000] ACPI: HPET 7ffa8470 00038 (v01 072709 OEMHPET 20090727 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1159MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00011000 - 00017f00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98]
[ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #5 [00008da000 - 00008dd133] BRK ==> [00008da000 - 00008dd133]
[ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #7 [00008de000 - 000107746a] NEW RAMDISK ==> [00008de000 - 000107746a]
[ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007ffa0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x00000097
[ 0.000000] 0: 0x00000100 -> 0x0007ffa0
[ 0.000000] On node 0 totalpages: 524071
[ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1079200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3943 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2320 pages used for memmap
[ 0.000000] HighMem zone: 294546 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000097000 - 0000000000098000
[ 0.000000] PM: Registered nosave memory: 0000000000098000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s36024 r0 d21320 u1048576
[ 0.000000] pcpu-alloc: s36024 r0 d21320 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519975
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=27ddcf0e-b344-42f7-ba20-ff9ae2dc16e6 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] allocated 10483520 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007ffa0)
[ 0.000000] Memory: 2051580k/2096768k available (4673k kernel code, 43552k reserved, 2122k data, 656k init, 1187464k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB)
[ 0.000000] .data : 0xc0590613 - 0xc07a2e48 (2122 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0590613 (4673 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:440
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3120.391 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6240.78 BogoMIPS (lpj=12481564)
[ 0.004018] Security Framework initialized
[ 0.004033] AppArmor: AppArmor initialized
[ 0.004039] Mount-cache hash table entries: 512
[ 0.004139] Initializing cgroup subsys ns
[ 0.004142] Initializing cgroup subsys cpuacct
[ 0.004146] Initializing cgroup subsys memory
[ 0.004151] Initializing cgroup subsys devices
[ 0.004153] Initializing cgroup subsys freezer
[ 0.004155] Initializing cgroup subsys net_cls
[ 0.004171] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004173] CPU: L2 cache: 3072K
[ 0.004176] CPU: Physical Processor ID: 0
[ 0.004177] CPU: Processor Core ID: 0
[ 0.004181] mce: CPU supports 6 MCE banks
[ 0.004188] CPU0: Thermal monitoring enabled (TM1)
[ 0.004191] using mwait in idle threads.
[ 0.004196] Performance Events: Core2 events, Intel PMU driver.
[ 0.004203] ... version: 2
[ 0.004204] ... bit width: 40
[ 0.004206] ... generic registers: 2
[ 0.004207] ... value mask: 000000ffffffffff
[ 0.004209] ... max period: 000000007fffffff
[ 0.004210] ... fixed-purpose events: 3
[ 0.004212] ... event mask: 0000000700000003
[ 0.004217] Checking 'hlt' instruction... OK.
[ 0.022375] ACPI: Core revision 20090903
[ 0.032007] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.032012] ftrace: allocating 21771 entries in 43 pages
[ 0.040038] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.040342] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.084293] CPU0: Intel(R) Core(TM)2 Duo CPU E7600 @ 3.06GHz stepping 0a
[ 0.088001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 3072K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring enabled (TM1)
[ 0.172063] CPU1: Intel(R) Core(TM)2 Duo CPU E7600 @ 3.06GHz stepping 0a
[ 0.172073] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.176014] Brought up 2 CPUs
[ 0.176017] Total of 2 processors activated (12480.82 BogoMIPS).
[ 0.176581] CPU0 attaching sched-domain:
[ 0.176584] domain 0: span 0-1 level MC
[ 0.176586] groups: 0 1
[ 0.176591] CPU1 attaching sched-domain:
[ 0.176593] domain 0: span 0-1 level MC
[ 0.176595] groups: 1 0
[ 0.176676] devtmpfs: initialized
[ 0.176676] regulator: core version 0.5
[ 0.176676] Time: 9:14:41 Date: 05/05/10
[ 0.176676] NET: Registered protocol family 16
[ 0.176676] Trying to unpack rootfs image as initramfs...
[ 0.176676] EISA bus registered
[ 0.176676] ACPI: bus type pci registered
[ 0.176676] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 0.176676] PCI: Not using MMCONFIG.
[ 0.176676] PCI: Using configuration type 1 for base access
[ 0.180078] bio: create slab <bio-0> at 0
[ 0.180835] ACPI: EC: Look up EC in DSDT
[ 0.185133] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.190222] ACPI: Interpreter enabled
[ 0.190231] ACPI: (supports S0 S1 S4 S5)
[ 0.190248] ACPI: Using IOAPIC for interrupt routing
[ 0.190294] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 0.196409] PCI: MCFG area at f8000000 reserved in ACPI motherboard resources
[ 0.196411] PCI: Using MMCONFIG for extended config space
[ 0.204926] ACPI Warning: Incorrect checksum in table [OEMB] - 29, should be 26 (20090903/tbutils-314)
[ 0.205051] ACPI: No dock devices found.
[ 0.205307] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.261575] NET: Registered protocol family 2
[ 0.261661] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.261923] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.262310] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.262480] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.262482] TCP reno registered
[ 0.262544] NET: Registered protocol family 1
[ 0.262679] pci 0000:07:00.0: Boot video device
[ 0.262839] cpufreq-nforce2: No nForce2 chipset.
[ 0.262862] Scanning for low memory corruption every 60 seconds
[ 0.262950] audit: initializing netlink socket (disabled)
[ 0.262957] type=2000 audit(1273050881.259:1): initialized
[ 0.271170] highmem bounce pool size: 64 pages
[ 0.271175] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.272428] VFS: Disk quotas dquot_6.5.2
[ 0.272476] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.272939] fuse init (API version 7.13)
[ 0.273009] msgmni has been set to 1689
[ 0.273178] alg: No test for stdrng (krng)
[ 0.273225] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.273227] io scheduler noop registered
[ 0.273229] io scheduler anticipatory registered
[ 0.273230] io scheduler deadline registered
[ 0.273261] io scheduler cfq registered (default)
[ 0.273386] alloc irq_desc for 24 on node -1
[ 0.273388] alloc kstat_irqs on node -1
[ 0.273395] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.273400] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.273483] alloc irq_desc for 25 on node -1
[ 0.273485] alloc kstat_irqs on node -1
[ 0.273491] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.273497] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.273596] alloc irq_desc for 26 on node -1
[ 0.273598] alloc kstat_irqs on node -1
[ 0.273604] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
[ 0.273610] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.273706] alloc irq_desc for 27 on node -1
[ 0.273708] alloc kstat_irqs on node -1
[ 0.273714] pcieport 0000:00:1c.2: irq 27 for MSI/MSI-X
[ 0.273721] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.273818] alloc irq_desc for 28 on node -1
[ 0.273819] alloc kstat_irqs on node -1
[ 0.273825] pcieport 0000:00:1c.3: irq 28 for MSI/MSI-X
[ 0.273832] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.273930] alloc irq_desc for 29 on node -1
[ 0.273931] alloc kstat_irqs on node -1
[ 0.273937] pcieport 0000:00:1c.5: irq 29 for MSI/MSI-X
[ 0.273945] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.274020] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.274034] Firmware did not grant requested _OSC control
[ 0.274047] Firmware did not grant requested _OSC control
[ 0.274056] Firmware did not grant requested _OSC control
[ 0.274066] Firmware did not grant requested _OSC control
[ 0.274076] Firmware did not grant requested _OSC control
[ 0.274098] Firmware did not grant requested _OSC control
[ 0.274107] Firmware did not grant requested _OSC control
[ 0.274117] Firmware did not grant requested _OSC control
[ 0.274126] Firmware did not grant requested _OSC control
[ 0.274136] Firmware did not grant requested _OSC control
[ 0.274147] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.274232] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.274235] ACPI: Power Button [PWRB]
[ 0.274272] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.274274] ACPI: Power Button [PWRF]
[ 0.274545] processor LNXCPU:00: registered as cooling_device0
[ 0.274574] processor LNXCPU:01: registered as cooling_device1
[ 0.279504] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.279593] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.279687] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.280053] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.280916] brd: module loaded
[ 0.281297] loop: module loaded
[ 0.281360] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.281432] ata_piix 0000:00:1f.2: version 2.13
[ 0.281445] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.281449] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.281485] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.281533] scsi0 : ata_piix
[ 0.281591] scsi1 : ata_piix
[ 0.282800] ata1: SATA max UDMA/133 cmd 0x8c00 ctl 0x8880 bmdma 0x8400 irq 19
[ 0.282804] ata2: SATA max UDMA/133 cmd 0x8800 ctl 0x8480 bmdma 0x8408 irq 19
[ 0.282822] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.282825] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.282856] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.282884] scsi2 : ata_piix
[ 0.282931] scsi3 : ata_piix
[ 0.283865] ata3: SATA max UDMA/133 cmd 0x9c00 ctl 0x9880 bmdma 0x9400 irq 19
[ 0.283869] ata4: SATA max UDMA/133 cmd 0x9800 ctl 0x9480 bmdma 0x9408 irq 19
[ 0.283921] pata_acpi 0000:05:00.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.283944] pata_acpi 0000:05:00.1: setting latency timer to 64
[ 0.283955] pata_acpi 0000:05:00.1: PCI INT A disabled
[ 0.283982] isapnp: Scanning for PnP cards...
[ 0.284199] Fixed MDIO Bus: probed
[ 0.284226] PPP generic driver version 2.4.2
[ 0.284257] tun: Universal TUN/TAP device driver, 1.6
[ 0.284258] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.284322] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.284336] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.284345] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.284348] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.284377] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.284397] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.288268] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.288290] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf1eff400
[ 0.303636] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.303716] usb usb1: configuration #1 chosen from 1 choice
[ 0.303738] hub 1-0:1.0: USB hub found
[ 0.303744] hub 1-0:1.0: 6 ports detected
[ 0.303798] alloc irq_desc for 23 on node -1
[ 0.303800] alloc kstat_irqs on node -1
[ 0.303805] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.303817] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.303819] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.303846] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.303866] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.307737] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.311573] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf1eff800
[ 0.327693] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.327787] usb usb2: configuration #1 chosen from 1 choice
[ 0.327809] hub 2-0:1.0: USB hub found
[ 0.327816] hub 2-0:1.0: 6 ports detected
[ 0.327876] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.327893] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.327927] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.327934] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.327936] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.327963] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.327991] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00007400
[ 0.328058] usb usb3: configuration #1 chosen from 1 choice
[ 0.328080] hub 3-0:1.0: USB hub found
[ 0.328085] hub 3-0:1.0: 2 ports detected
[ 0.328119] alloc irq_desc for 21 on node -1
[ 0.328121] alloc kstat_irqs on node -1
[ 0.328126] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.328130] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.328133] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.328158] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.328184] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00007480
[ 0.328255] usb usb4: configuration #1 chosen from 1 choice
[ 0.328275] hub 4-0:1.0: USB hub found
[ 0.328280] hub 4-0:1.0: 2 ports detected
[ 0.328313] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.328318] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.328321] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.328345] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.328365] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00007800
[ 0.328435] usb usb5: configuration #1 chosen from 1 choice
[ 0.328455] hub 5-0:1.0: USB hub found
[ 0.328460] hub 5-0:1.0: 2 ports detected
[ 0.328494] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.328499] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.328501] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.328528] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.328548] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00007880
[ 0.328616] usb usb6: configuration #1 chosen from 1 choice
[ 0.328636] hub 6-0:1.0: USB hub found
[ 0.328641] hub 6-0:1.0: 2 ports detected
[ 0.328675] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.328679] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.328682] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.328705] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.328725] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00007c00
[ 0.328794] usb usb7: configuration #1 chosen from 1 choice
[ 0.328814] hub 7-0:1.0: USB hub found
[ 0.328819] hub 7-0:1.0: 2 ports detected
[ 0.328852] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.328856] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.328859] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.328884] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.328904] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00008000
[ 0.328977] usb usb8: configuration #1 chosen from 1 choice
[ 0.328997] hub 8-0:1.0: USB hub found
[ 0.329002] hub 8-0:1.0: 2 ports detected
[ 0.329083] PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
[ 0.329085] PNP: PS/2 controller doesn't have KBD irq; using default 1
[ 0.329445] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.329450] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.329511] mice: PS/2 mouse device common for all mice
[ 0.329598] rtc_cmos 00:03: RTC can wake from S4
[ 0.329630] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.329651] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.329731] device-mapper: uevent: version 1.0.3
[ 0.339794] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.355947] Freeing initrd memory: 7781k freed
[ 0.358773] device-mapper: multipath: version 1.1.0 loaded
[ 0.358777] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.358928] EISA: Probing bus 0 at eisa.0
[ 0.358934] Cannot allocate resource for EISA slot 1
[ 0.358935] Cannot allocate resource for EISA slot 2
[ 0.358947] Cannot allocate resource for EISA slot 7
[ 0.358949] Cannot allocate resource for EISA slot 8
[ 0.358951] EISA: Detected 0 cards.
[ 0.359010] cpuidle: using governor ladder
[ 0.359012] cpuidle: using governor menu
[ 0.359384] TCP cubic registered
[ 0.359522] NET: Registered protocol family 10
[ 0.359916] lo: Disabled Privacy Extensions
[ 0.360191] NET: Registered protocol family 17
[ 0.360242] Using IPI No-Shortcut mode
[ 0.360319] PM: Resume from disk failed.
[ 0.360329] registered taskstats version 1
[ 0.360835] Magic number: 10:488:221
[ 0.360910] rtc_cmos 00:03: setting system clock to 2010-05-05 09:14:41 UTC (1273050881)
[ 0.360912] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.360914] EDD information not available.
[ 0.636915] isapnp: No Plug & Play device found
[ 0.661940] ata4: SATA link down (SStatus 0 SControl 300)
[ 0.681942] ata3: SATA link down (SStatus 0 SControl 300)
[ 0.681960] usb 2-3: new high speed USB device using ehci_hcd and address 2
[ 0.812610] usb 2-3: configuration #1 chosen from 1 choice
[ 0.812832] hub 2-3:1.0: USB hub found
[ 0.813189] hub 2-3:1.0: 4 ports detected
[ 1.044007] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 1.132051] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.132062] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.144083] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.144093] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 1.148401] ata1.00: ATA-7: Hitachi HDS721680PLA380, P21OA70A, max UDMA/133
[ 1.148403] ata1.00: 160836480 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.148535] ata1.01: ATA-8: SAMSUNG HD502HJ, 1AJ100E4, max UDMA/133
[ 1.148537] ata1.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.164363] ata1.00: configured for UDMA/133
[ 1.172512] ata1.01: configured for UDMA/133
[ 1.172523] ata2.00: ATA-7: Hitachi HDT725025VLA380, V5DOA52A, max UDMA/133
[ 1.172525] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.172647] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72168 P21O PQ: 0 ANSI: 5
[ 1.172748] sd 0:0:0:0: [sda] 160836480 512-byte logical blocks: (82.3 GB/76.6 GiB)
[ 1.172758] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.172788] sd 0:0:0:0: [sda] Write Protect is off
[ 1.172790] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.172813] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.172846] scsi 0:0:1:0: Direct-Access ATA SAMSUNG HD502HJ 1AJ1 PQ: 0 ANSI: 5
[ 1.172922] sd 0:0:1:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.172934] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 1.172957] sd 0:0:1:0: [sdb] Write Protect is off
[ 1.172959] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.172980] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.173072] sdb: sdb1
[ 1.179986] sda:
[ 1.188369] ata2.00: configured for UDMA/133
[ 1.188430] scsi 1:0:0:0: Direct-Access ATA Hitachi HDT72502 V5DO PQ: 0 ANSI: 5
[ 1.188507] sd 1:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.188523] sd 1:0:0:0: Attached scsi generic sg2 type 0
[ 1.188542] sd 1:0:0:0: [sdc] Write Protect is off
[ 1.188544] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.188573] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.188666] sdc: sda1 sda2 sda3 sda4 < sda5 sdc1 sdc2
[ 1.207135] sd 1:0:0:0: [sdc] Attached SCSI disk
[ 1.213617] sda6 sda7 sda8 >
[ 1.232321] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 1.232607] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.232618] Freeing unused kernel memory: 656k freed
[ 1.232908] Write protecting the kernel text: 4676k
[ 1.232941] Write protecting the kernel read-only data: 1840k
[ 1.245528] udev: starting version 151
[ 1.285996] usb 3-1: configuration #1 chosen from 1 choice
[ 1.292486] pata_via 0000:05:00.1: version 0.3.4
[ 1.292497] pata_via 0000:05:00.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.292551] pata_via 0000:05:00.1: setting latency timer to 64
[ 1.298601] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.298615] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.298646] r8169 0000:02:00.0: setting latency timer to 64
[ 1.298686] alloc irq_desc for 30 on node -1
[ 1.298688] alloc kstat_irqs on node -1
[ 1.298700] r8169 0000:02:00.0: irq 30 for MSI/MSI-X
[ 1.299229] eth0: RTL8168d/8111d at 0xf808a000, 00:25:22:0f:9e:85, XID 081000c0 IRQ 30
[ 1.318663] scsi4 : pata_via
[ 1.325681] scsi5 : pata_via
[ 1.325902] ata5: PATA max UDMA/133 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
[ 1.325904] ata6: PATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
[ 1.347461] ahci 0000:04:00.0: version 3.0
[ 1.347481] ahci 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.364052] ahci 0000:04:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[ 1.364056] ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.364062] ahci 0000:04:00.0: setting latency timer to 64
[ 1.374452] scsi6 : ahci
[ 1.374523] ata7: SATA max UDMA/133 abar m8192@0xf3efe000 port 0xf3efe100 irq 18
[ 1.376761] usbcore: registered new interface driver hiddev
[ 1.396758] usb 2-3.2: new high speed USB device using ehci_hcd and address 3
[ 1.413158] input: Jing-Mold USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input3
[ 1.413224] generic-usb 0003:05AF:8266.0001: input,hidraw0: USB HID v1.10 Keyboard [Jing-Mold USB Keyboard] on usb-0000:00:1a.0-1/input0
[ 1.460020] input: Jing-Mold USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input4
[ 1.460134] generic-usb 0003:05AF:8266.0002: input,hidraw1: USB HID v1.10 Device [Jing-Mold USB Keyboard] on usb-0000:00:1a.0-1/input1
[ 1.460151] usbcore: registered new interface driver usbhid
[ 1.460153] usbhid: v2.6:USB HID core driver
[ 1.497837] usb 2-3.2: configuration #1 chosen from 1 choice
[ 1.504134] Initializing USB Mass Storage driver...
[ 1.504224] scsi7 : SCSI emulation for USB Mass Storage devices
[ 1.504342] usbcore: registered new interface driver usb-storage
[ 1.504344] USB Mass Storage support registered.
[ 1.504411] ata5.00: ATAPI: _NEC DV-5800E, G9S1, max UDMA/33
[ 1.504417] usb-storage: device found at 3
[ 1.504418] usb-storage: waiting for device to settle before scanning
[ 1.504440] ata5.01: ATAPI: Optiarc DVD RW AD-7173A, 1-01, max UDMA/66
[ 1.504462] ata5.01: limited to UDMA/33 due to 40-wire cable
[ 1.516539] ata5.00: configured for UDMA/33
[ 1.536451] ata5.01: configured for UDMA/33
[ 1.537489] scsi 4:0:0:0: CD-ROM _NEC DV-5800E G9S1 PQ: 0 ANSI: 5
[ 1.539667] sr0: scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray
[ 1.539669] Uniform CD-ROM driver Revision: 3.20
[ 1.539755] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 1.539805] sr 4:0:0:0: Attached scsi generic sg3 type 5
[ 1.540913] scsi 4:0:1:0: CD-ROM Optiarc DVD RW AD-7173A 1-01 PQ: 0 ANSI: 5
[ 1.543475] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.543539] sr 4:0:1:0: Attached scsi CD-ROM sr1
[ 1.543577] sr 4:0:1:0: Attached scsi generic sg4 type 5
[ 1.696025] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.714481] ohci1394 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.714488] ohci1394 0000:05:00.0: setting latency timer to 64
[ 1.770521] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f3fef800-f3feffff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 2.030828] kjournald starting. Commit interval 5 seconds
[ 2.030835] EXT3-fs: mounted filesystem with ordered data mode.
[ 3.044115] ieee1394: Host added: ID:BUS[0-00:1023] GUID[008f130084710700]
[ 6.156467] Adding 4096532k swap on /dev/sda5. Priority:-1 extents:1 across:4096532k
[ 6.274806] udev: starting version 151
[ 6.501224] usb-storage: device scan complete
[ 6.501756] scsi 7:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 6.502370] scsi 7:0:0:1: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 6.502994] sd 7:0:0:0: Attached scsi generic sg5 type 0
[ 6.504400] sd 7:0:0:1: Attached scsi generic sg6 type 0
[ 6.507400] sd 7:0:0:0: [sdd] Attached SCSI removable disk
[ 6.508139] sd 7:0:0:1: [sde] Attached SCSI removable disk
[ 98.102497] UDF-fs: No VRS found
[ 98.102500] UDF-fs: No partition found (1)
[ 98.150478] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 98.212527] ISO 9660 Extensions: RRIP_1991A
