xen domU starten

[Eisen]

Hallo ich bin gerade dabei mir einen xen server aufzusetzen hat bis jetzt auch alles gut funktioniert nur habe ich jetzt ein problem beim ersten start einer gast domäne
die vm bleibt beim booten hängen..
wenn ich sie starte sieht der boot vorgang so aus :

Code: Alles auswählen

Loading, please wait...
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... FATAL: Error inserting fan (/lib/modules/2.6.26-1-xen-686/kernel/drivers/acpi/fan.ko): No such device
WARNING: Error inserting processor (/lib/modules/2.6.26-1-xen-686/kernel/drivers/acpi/processor.ko): No such device
[    1.028972] thermal: Unknown symbol acpi_processor_set_thermal_limit
FATAL: Error inserting thermal (/lib/modules/2.6.26-1-xen-686/kernel/drivers/acpi/thermal.ko): Unknown symbol in module, or unknown parameter (see dmesg)
done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
[    2.105350] kjournald starting.  Commit interval 5 seconds
[    2.105465] EXT3-fs: mounted filesystem with ordered data mode.
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.86 booting
hostname: the specified hostname is invalid
Mount point '/dev/shm' does not exist. Skipping mount. (warning).
Setting the system clock.
Unable to set System Clock to: Fri Jan 29 12:51:01 UTC 2010 (warning).
Activating swap...[    7.800749] Adding 131064k swap on /dev/sda1.  Priority:-1 extents:1 across:131064k
done.
Checking root file system...fsck 1.41.3 (12-Oct-2008)
/dev/sda2: clean, 12247/1310720 files, 195640/5242880 blocks
done.
[    7.897556] EXT3 FS on sda2, internal journal
Setting the system clock.
Unable to set System Clock to: Fri Jan 29 12:51:07 UTC 2010 (warning).
Cleaning up ifupdown....
Loading kernel modules...done.
Checking file systems...fsck 1.41.3 (12-Oct-2008)
done.
Setting kernel variables (/etc/sysctl.conf)...done.
Mounting local filesystems...done.
Activating swapfile swap...done.
Setting up networking....
Configuring network interfaces...Internet Systems Consortium DHCP Client V3.1.1
Copyright 2004-2008 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/

Listening on LPF/eth0/00:16:3e:27:e4:83
Sending on   LPF/eth0/00:16:3e:27:e4:83
Sending on   Socket/fallback
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6
DHCPOFFER from 192.168.2.1
DHCPREQUEST on eth0 to 255.255.255.255 port 67
DHCPACK from 192.168.2.1
bound to 192.168.2.101 -- renewal in 395885 seconds.
done.
INIT: Entering runlevel: 2
Starting enhanced syslogd: rsyslogd.
Starting OpenBSD Secure Shell server: sshd[   17.645503] NET: Registered protocol family 10
[   17.646528] lo: Disabled Privacy Extensions
.
Starting periodic command scheduler: crond.

an der stelle passiert dann leider nichts mehr. weiß jemand woran das liegen kann bzw. wie das problem zu beheben ist?

danke schon mal..

[Eisen]

ok habs jetzt selbst gelöst.
Falls mal jemand das selbe problem hat hier meine lösung ich hab das config file '/etc/xen-tools/xen-tools.conf' so angepasst:

Code: Alles auswählen

dir = /home/xen
install-method = debootstrap
debootstrap-cmd=/usr/sbin/debootstrap
 size   = 4Gb      # Disk image size.
 memory = 256Mb    # Memory size
 swap   = 256Mb    # Swap size
 fs     = ext3     # use the EXT3 filesystem for the disk image.
 dist   = lenny     # Default distribution to install.
 image  = sparse   # Specify sparse vs. full disk images.
dhcp = 1
kernel      = /boot/vmlinuz-`uname -r`
 initrd      = /boot/initrd.img-`uname -r`
mirror = http://ftp.de.debian.org/debian/
 ext3_options   = noatime,nodiratime,errors=remount-ro
 ext2_options   = noatime,nodiratime,errors=remount-ro
 xfs_options    = defaults
 reiser_options = defaults
boot = 1
serial_device = hvc0 
disk_device = xvda

nun nur noch

Code: Alles auswählen

xen-create-image --hostname xen_devel --role=udev

ausführen und es läuft (bei mir jedenfalls )