Ich habe einen Canon Pixma MX700 via Ethernet und USB mit meinem Server bzw. Netzwerk verbunden. Der Drucker wurde mit CUPS eingerichtet und funktioniert problemlos. Beim Scannen gibt es aber noch Probleme. Ich habe Sane auf Debian 5 (Lenny) installiert, sowie die sane-tools.
sane-find-scanner gibt folgendes aus:
scanimage -L ergibt leider folgendes:# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
# Also you need support for SCSI Generic (sg) in your operating system.
# If using Linux, try "modprobe sg".
found USB scanner (vendor=0x04a9 [Canon], product=0x1729 [MX700 series]) at libusb:006:002
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
Der User root ist in der Gruppe scanner. Auf folgender Seite hab ich Treiber gefunden und heruntergeladen, kompiliert und installiert.No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
Die Installation gibt folgendes aus:
Laut http://www.sane-project.org/man/sane-pixma.5.html sollte der Canon MX700 unterstütz werden.Please connect and turn on your scanner! I will try to detect it.
Please wait until your scanner is ready, then press return...
No supported scanner found!
Sorry, I couldn't detect your scanner.
Please check if it is connected and turned on.
The following models are currently supported.
Supported scanner(s):
Name VID:PID IF DPI
Canon PIXMA MP150 04a9:1709 0 1200x2400
Canon PIXMA MP170 04a9:170a 0 1200x2400
Canon PIXMA MP450 04a9:170b 0 1200x2400
Canon PIXMA MP500 04a9:170c 0 1200x2400
Canon PIXMA MP530 04a9:1712 0 1200x2400
Canon PIXMA MP800 04a9:170d 0 2400x4800
Canon PIXMA MP800R 04a9:170e 0 2400x4800
Canon PIXMA MP830 04a9:1713 0 2400x4800
Canon PIXMA MP160 04a9:1714 0 600x1200
Canon PIXMA MP180 04a9:1715 0 1200x2400
Canon PIXMA MP460 04a9:1716 0 1200x2400
Canon PIXMA MP510 04a9:1717 0 1200x2400
Canon PIXMA MP600 04a9:1718 0 2400x4800
Canon PIXMA MP600R 04a9:1719 0 2400x4800
Canon PIXMA MP810 04a9:171a 0 4800x9600
Canon PIXMA MP960 04a9:171b 0 4800x9600
Canon PIXMA MP750 04a9:1706 0 2400x4800
Canon PIXMA MP760 04a9:1708 0 2400x4800
Canon PIXMA MP780 04a9:1707 0 2400x4800
Canon SmartBase MP360 04a9:263c 1 1200x1200
Canon SmartBase MP370 04a9:263d 1 1200x1200
Canon SmartBase MP390 04a9:263e 1 1200x1200
Canon MultiPASS MP700 04a9:2630 1 1200x1200
Canon MultiPASS MP730 04a9:262f 1 1200x1200
No supported scanner found!
make: *** [install] Fehler 1
In der dll.conf sind alle Scanner mit # auskommentiert, außer der pixma.
Kann mir jemand weiterhelfen, wie ich das zum Laufen bekommen kann und somit Sane als Scannerserver verwenden kann?
