Probleme mit der X (!!) More than one primary device found

[Echelon]

ich hab meine schwester endlich von win98 erlöst und ihr woody installiert. nur der xserver möchte nicht, so wie er soll. er erkennt angeblich mehrere grafikkarten auf dem pci bus, aber kann hinterher keine treiber dafür laden..für keine der karten.

meine log datei:

warning: process set to nice value 0 instead of -10 as requested

This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org. Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs)

XFree86 Version 4.1.0.1 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 21 December 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.17 i686 [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Wed Sep 17 00:02:11 2003
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "My Monitor"
(**) | |-->Device "Matrox Millennium 2MB"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "de"
(**) XKB: variant: "de"
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 8

(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(!!) More than one primary device found
(--) PCI: (0:14:0) Matrox MGA 2064W rev 1, Mem @ 0x80800000/14, 0x80000000/23
(--) PCI: (1:14:0) Matrox MGA 2064W rev 1, Mem @ 0x80800000/14, 0x80000000/23
(--) PCI: (2:14:0) Matrox MGA 2064W rev 1, Mem @ 0x80800000/14, 0x80000000/23
(--) PCI: (3:14:0) Matrox MGA 2064W rev 1, Mem @ 0x80800000/14, 0x80000000/23
(--) PCI: (4:14:0) Matrox MGA 2064W rev 1, Mem @ 0x80800000/14, 0x80000000/23
(--) PCI: (5:14:0) Matrox MGA 2064W rev 1, Mem @ 0x80800000/14, 0x80000000/23
(--) PCI: (6:14:0) Matrox MGA 2064W rev 1, Mem @ 0x80800000/14, 0x80000000/23
(--) PCI: (7:14:0) Matrox MGA 2064W rev 1, Mem @ 0x80800000/14, 0x80000000/23
(--) PCI: (8:14:0) Matrox MGA 2064W rev 1, Mem @ 0x80800000/14, 0x80000000/23
(--) PCI: (9:14:0) Matrox MGA 2064W rev 1, Mem @ 0x80800000/14, 0x80000000/23
(--) PCI: (10:14:0) Matrox MGA 2064W rev 1, Mem @ 0x80800000/14, 0x80000000/23
(--) PCI: (11:14:0) Matrox MGA 2064W rev 1, Mem @ 0x80800000/14, 0x80000000/23
(--) PCI: (12:14:0) Matrox MGA 2064W rev 1, Mem @ 0x80800000/14, 0x80000000/23
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.1.9
(II) Loading /usr/X11R6/lib/modules/drivers/mga_drv.o
(II) Module mga: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.1
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag400
(WW) MGA: No matching Device section for instance (BusID PCI:0:14:0) found
(WW) MGA: No matching Device section for instance (BusID PCI:1:14:0) found
(WW) MGA: No matching Device section for instance (BusID PCI:2:14:0) found
(WW) MGA: No matching Device section for instance (BusID PCI:3:14:0) found
(WW) MGA: No matching Device section for instance (BusID PCI:4:14:0) found
(WW) MGA: No matching Device section for instance (BusID PCI:5:14:0) found
(WW) MGA: No matching Device section for instance (BusID PCI:6:14:0) found
(WW) MGA: No matching Device section for instance (BusID PCI:7:14:0) found
(WW) MGA: No matching Device section for instance (BusID PCI:8:14:0) found
(WW) MGA: No matching Device section for instance (BusID PCI:9:14:0) found
(WW) MGA: No matching Device section for instance (BusID PCI:10:14:0) found
(WW) MGA: No matching Device section for instance (BusID PCI:11:14:0) found
(WW) MGA: No matching Device section for instance (BusID PCI:12:14:0) found
(EE) No devices detected.

Fatal server error:
no screens found

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

Identifier "My Monitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

HorizSync 31.5 - 48.5

# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

VertRefresh 30-50

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"

# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.

# Chipset "generic"

# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.

# BusID "PCI:0:0e:0"

# VideoRam 256

# Clocks 25.2 28.3

EndSection

# Device configured by xf86config:

Section "Device"
Identifier "Matrox Millennium 2MB"
Driver "mga"
#VideoRam 2048
VideoRam 2048
# Insert Clocks lines here if appropriate
EndSection

[zyta2k]

mach mal lspci.
Sollte eine Zeile im folgenden Stile geben

00:0d.0 Bla bla Meine Geile Matrox Karte

^^^^^^^
das ist die PCI ID...
diese kannst du im XF86Config-4 übergeben

Section "Device"
Identifier "Matrox Millennium 2MB"
Driver "mga"
VideoRam 2048
BusID "PCI:0:0d:0"
EndSection

Greetz

[Echelon]

funktioniert weder mit 00:0e.0 , das lspci ausgibt, noch mit 0:14:0 , die das log vom Xserver ausgibt.

Section "Device"
Identifier "Matrox Millennium 2MB"
Driver "mga"
VideoRam 2048
BusID "PCI:00:0e.0"
# Insert Clocks lines here if appropriate
EndSection

hier allerdings gibt es diese Fehlermeldung:

Section "Device"
Identifier "Matrox Millennium 2MB"
Driver "mga"
VideoRam 2048
BusID "PCI:0:14.0"
# Insert Clocks lines here if appropriate
EndSection

This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org. Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs)

XFree86 Version 4.1.0.1 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 21 December 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.17 i686 [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Wed Sep 17 17:36:08 2003
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "My Monitor"
(**) | |-->Device "Matrox Millennium 2MB"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "de"
(**) XKB: variant: "de"
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7

(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(!!) More than one primary device found
(--) PCI: (0:14:0) Matrox MGA 2064W rev 1, Mem @ 0x80800000/14, 0x80000000/23
(--) PCI: (1:14:0) Matrox MGA 2064W rev 1, Mem @ 0x80800000/14, 0x80000000/23
(--) PCI: (2:14:0) Matrox MGA 2064W rev 1, Mem @ 0x80800000/14, 0x80000000/23
(--) PCI: (3:14:0) Matrox MGA 2064W rev 1, Mem @ 0x80800000/14, 0x80000000/23
(--) PCI: (4:14:0) Matrox MGA 2064W rev 1, Mem @ 0x80800000/14, 0x80000000/23
(--) PCI: (5:14:0) Matrox MGA 2064W rev 1, Mem @ 0x80800000/14, 0x80000000/23
(--) PCI: (6:14:0) Matrox MGA 2064W rev 1, Mem @ 0x80800000/14, 0x80000000/23
(--) PCI: (7:14:0) Matrox MGA 2064W rev 1, Mem @ 0x80800000/14, 0x80000000/23
(--) PCI: (8:14:0) Matrox MGA 2064W rev 1, Mem @ 0x80800000/14, 0x80000000/23
(--) PCI: (9:14:0) Matrox MGA 2064W rev 1, Mem @ 0x80800000/14, 0x80000000/23
(--) PCI: (10:14:0) Matrox MGA 2064W rev 1, Mem @ 0x80800000/14, 0x80000000/23
(--) PCI: (11:14:0) Matrox MGA 2064W rev 1, Mem @ 0x80800000/14, 0x80000000/23
(--) PCI: (12:14:0) Matrox MGA 2064W rev 1, Mem @ 0x80800000/14, 0x80000000/23
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.1.9
(II) Loading /usr/X11R6/lib/modules/drivers/mga_drv.o
(II) Module mga: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.1
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag400
(WW) MGA: No matching Device section for instance (BusID PCI:1:14:0) found
(WW) MGA: No matching Device section for instance (BusID PCI:2:14:0) found
(WW) MGA: No matching Device section for instance (BusID PCI:3:14:0) found
(WW) MGA: No matching Device section for instance (BusID PCI:4:14:0) found
(WW) MGA: No matching Device section for instance (BusID PCI:5:14:0) found
(WW) MGA: No matching Device section for instance (BusID PCI:6:14:0) found
(WW) MGA: No matching Device section for instance (BusID PCI:7:14:0) found
(WW) MGA: No matching Device section for instance (BusID PCI:8:14:0) found
(WW) MGA: No matching Device section for instance (BusID PCI:9:14:0) found
(WW) MGA: No matching Device section for instance (BusID PCI:10:14:0) found
(WW) MGA: No matching Device section for instance (BusID PCI:11:14:0) found
(WW) MGA: No matching Device section for instance (BusID PCI:12:14:0) found
(--) Chipset mga2064w found
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
(**) MGA(0): Depth 16, (--) framebuffer bpp 16
(==) MGA(0): RGB weight 565
(II) MGA(0): Matrox HAL module not found - using builtin mode setup instead
(--) MGA(0): Chipset: "mga2064w"
(==) MGA(0): Using AGP 1x mode
(--) MGA(0): Linear framebuffer at 0x80000000
(--) MGA(0): MMIO registers at 0x80800000
(--) MGA(0): Video BIOS info block at offset 0x07BFC
(**) MGA(0): VideoRAM: 2048 kByte
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.2.0
(II) MGA(0): I2C bus "DDC" initialized.
(II) MGA(0): I2C device "DDC:ddc2" registered.
(II) MGA(0): I2C device "DDC:ddc2" removed.
(II) MGA(0): I2C device "DDC:ddc2" registered.
(II) MGA(0): I2C device "DDC:ddc2" removed.
(II) MGA(0): I2C Monitor info: 0x82d4ac8
(II) MGA(0): Manufacturer: SAM Model: 4d50 Serial#: 0
(II) MGA(0): Year: 1995 Week: 17
(II) MGA(0): EDID Version: 1.0
(II) MGA(0): Analog Display Input, Input Voltage Level: 0.714/0.286 V
(II) MGA(0): Sync: Separate Composite
(II) MGA(0): Max H-Image Size [cm]: horiz.: 27 vert.: 20
(II) MGA(0): Gamma: 2.01
(II) MGA(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) MGA(0): redX: 0.619 redY: 0.350 greenX: 0.305 greenY: 0.600
(II) MGA(0): blueX: 0.154 blueY: 0.064 whiteX: 0.282 whiteY: 0.298
(II) MGA(0): Supported VESA Video Modes:
(II) MGA(0): 720x400@70Hz
(II) MGA(0): 720x400@88Hz
(II) MGA(0): 640x480@60Hz
(II) MGA(0): 640x480@67Hz
(II) MGA(0): 640x480@72Hz
(II) MGA(0): 640x480@75Hz
(II) MGA(0): 800x600@56Hz
(II) MGA(0): 800x600@60Hz
(II) MGA(0): 800x600@72Hz
(II) MGA(0): 800x600@75Hz
(II) MGA(0): 832x624@75Hz
(II) MGA(0): 1024x768@87Hz (interlaced)
(II) MGA(0): 1024x768@60Hz
(II) MGA(0): Manufacturer's mask: 0
(II) MGA(0): end of I2C Monitor info

(==) MGA(0): Using gamma correction (1.0, 1.0, 1.0)
(==) MGA(0): Min pixel clock is 12 MHz
(--) MGA(0): Max pixel clock is 220 MHz
(--) MGA(0): MCLK used is 60.0 MHz
(II) MGA(0): My Monitor: Using hsync range of 31.50-48.50 kHz
(II) MGA(0): My Monitor: Using vrefresh range of 30.00-50.00 Hz
(II) MGA(0): Clock range: 12.00 to 220.00 MHz
(II) MGA(0): Not using default mode "640x350" (vrefresh out of range)
(II) MGA(0): Not using default mode "640x400" (vrefresh out of range)
(II) MGA(0): Not using default mode "720x400" (vrefresh out of range)
(II) MGA(0): Not using default mode "640x480" (vrefresh out of range)
(II) MGA(0): Not using default mode "640x480" (vrefresh out of range)
(II) MGA(0): Not using default mode "640x480" (vrefresh out of range)
(II) MGA(0): Not using default mode "640x480" (vrefresh out of range)
(II) MGA(0): Not using default mode "800x600" (vrefresh out of range)
(II) MGA(0): Not using default mode "800x600" (vrefresh out of range)
(II) MGA(0): Not using default mode "800x600" (vrefresh out of range)
(II) MGA(0): Not using default mode "800x600" (vrefresh out of range)
(II) MGA(0): Not using default mode "800x600" (hsync out of range)
(II) MGA(0): Not using default mode "1024x768" (vrefresh out of range)
(II) MGA(0): Not using default mode "1024x768" (vrefresh out of range)
(II) MGA(0): Not using default mode "1024x768" (hsync out of range)
(II) MGA(0): Not using default mode "1024x768" (hsync out of range)
(II) MGA(0): Not using default mode "1024x768" (hsync out of range)
(II) MGA(0): Not using default mode "1152x864" (hsync out of range)
(II) MGA(0): Not using default mode "1280x960" (insufficient memory for mode)
(II) MGA(0): Not using default mode "1280x960" (insufficient memory for mode)
(II) MGA(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) MGA(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) MGA(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) MGA(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) MGA(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) MGA(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) MGA(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) MGA(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) MGA(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) MGA(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) MGA(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) MGA(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) MGA(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) MGA(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) MGA(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) MGA(0): Not using default mode "1400x1050" (insufficient memory for mode)
(WW) MGA(0): Mode pool is empty
(EE) MGA(0): No valid modes found
(II) Unloading /usr/X11R6/lib/modules/libi2c.a
(II) Unloading /usr/X11R6/lib/modules/libddc.a
(II) Unloading /usr/X11R6/lib/modules/libvgahw.a
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to submit@bugs.debian.org.

X connection to :0.0 broken (explicit kill or server shutdown).

normalerweise würde ich jetzt stundelang da sitzen und mit den kernels experimentieren, aber sie liegt mir schon in den ohren weil sie micq nciht besonders bequem findet [/quote]

[zyta2k]

micq ist doch lustig *loool*

nein, zu deinem X.

Sieht doch schon besser aus.

Jetzt hängts weil vsync hsync out of range sind...

Ist dein monitor korrekt definiert im XF86Config-4 ??

Bespiel:
Section "Monitor"
HorizSync 30-61
VertRefresh 50-75
EndSection

Hast du HorizSync und VertRefresh korrekt gesetzt ??

[Echelon]

jetzt stimmts mit dem bildschirm, fehlt noch der core pointer..

der erkennt die maus nicht, ist eine alte serielle maus, welches protokoll benutzt die?

[zyta2k]

Probier mal das:

ttyS0= wenn COM1
ttyS1= wenn COM2

Section "InputDevice"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
...
EndSection

[Echelon]

geht..
thx

muss es nur noch tunen..sieht nämlich hässlich aus

[zyta2k]

Tunen ?
Tieferlegen ??
*gg*

Was sieht hässlich aus ??

Auflösung ?
Farben ?

WindowManager ?

DesktopEnvironment ?

[Echelon]

es sind noch graue streifen, die von oben nach unten alle paar pixel über den bildschrim laufen. dabei hab ich h - und v-frequenz direkt von den hersteller daten eingetragen O_o.

[zyta2k]

gib mir mal deine zeilen in XF86Config-4 und die Herstellerdaten.

[Echelon]

http://www.monitorworld.com/Monitors/sa ... 5377l.html

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

Identifier "My Monitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

HorizSync 30 - 50

# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

VertRefresh 50 - 100

EndSection

[zyta2k]

nimm mal die leerzeichen raus...

HorizSync 30 - 50 => 30-50
VertRefresh 50 - 100 => 50-100

[Echelon]

hat nix bring

(II) MGA(0): My Monitor: Using hsync range of 30.00-50.00 kHz
(II) MGA(0): My Monitor: Using vrefresh range of 50.00-100.00 Hz
(II) MGA(0): Clock range: 12.00 to 220.00 MHz
(II) MGA(0): Not using default mode "800x600" (hsync out of range)
(II) MGA(0): Not using default mode "1024x768" (hsync out of range)

und die aufösungen muss der eigentlich auch können...

[zyta2k]

Modelines für Monitor berechnen...

1. Möglichkeit
apt-get install read-edid
get-edid

so sollte get-edid mittels PNP/DCC die Modelines des Monitors ausspucken

2. Möglichkeit (falls 1. fehlschlägt):
apt-get install videogen

Scheinst einen widerspenstigen Monitor zu haben

[2] http://www.dynaweb.hu/opensource/videogen/

[Echelon]

war meine schuld, ich hab 4 statt2 mb grafikkarten ram angegeben..ist fast ne antiquität aber ihr reichts zum chatten. jetzt muss ich nur noch die auflösung ändern...

aber trotzdem wieder thx