keine Load_Cycle Angaben

[mosa]

Bei meinem Dell Optiplex Stimmt was nicht! Obwohl der Rechner als Fileserver fungiert, hört man das hoch und runter sich drehen der Harddisk.
Das ist echt extrem - Nutze Debian Lenny. Zudem erhalte ich keine Angaben der Load_Cycle....
Noch was, es wurde kein X-Server installiert, und es nervt
Installiert wurde hdparm & hddtemp

Code: Alles auswählen

snow:~# date && hddtemp /dev/sda && smartctl -a /dev/sda | grep Load_Cycle_Count && smartctl -a
Mon Jul  6 14:07:09 CEST 2009
/dev/sda: SAMSUNG HD502IJ: 44°C
snow:~# 

Code: Alles auswählen

snow:~# smartctl --all /dev/sda
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     SAMSUNG HD502IJ
Serial Number:    S13TJ90S541996
Firmware Version: 1AA01118
User Capacity:    500'107'862'016 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 3b
Local Time is:    Mon Jul  6 13:38:03 2009 CEST

==> WARNING: May need -F samsung or -F samsung2 enabled; see manual for details.

SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

[rendegast]

Versuche

Code: Alles auswählen

smartctl -a -data /dev/sda

Bei USB-Laufwerken auch

Code: Alles auswählen

smartctl -a -d[sat|sat,12|sat,16] /dev/sda

'man smartctl' und Forensuche.

[mosa]

Danke rendegast, hier das Ergebniss:

Code: Alles auswählen

snow:~# smartctl -a -data /dev/sda
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     SAMSUNG HD502IJ
Serial Number:    S13TJ90S541996
Firmware Version: 1AA01118
User Capacity:    500'107'862'016 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 3b
Local Time is:    Mon Jul  6 15:37:09 2009 CEST

==> WARNING: May need -F samsung or -F samsung2 enabled; see manual for details.

SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                 (6682) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        ( 112) minutes.
Conveyance self-test routine
recommended polling time:        (  13) minutes.
SCT capabilities:              (0x003f) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   100   100   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0007   086   086   011    Pre-fail  Always       -       5130
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       10
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   253   253   051    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0025   100   100   015    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       56
 10 Spin_Retry_Count        0x0033   100   100   051    Pre-fail  Always       -       0
 11 Calibration_Retry_Count 0x0012   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       10
 13 Read_Soft_Error_Rate    0x000e   100   100   000    Old_age   Always       -       0
183 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0
184 Unknown_Attribute       0x0033   100   100   000    Pre-fail  Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   056   056   000    Old_age   Always       -       44 (Lifetime Min/Max 40/44)
194 Temperature_Celsius     0x0022   056   056   000    Old_age   Always       -       44 (Lifetime Min/Max 40/44)
195 Hardware_ECC_Recovered  0x001a   100   100   000    Old_age   Always       -       28001
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   100   100   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x000a   100   100   000    Old_age   Always       -       0
201 Soft_Read_Error_Rate    0x000a   253   253   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

snow:~#

Hm, scheint so weit in grenzen zu sein - doch warum keine Count Angaben da sind - versteh ich nicht.

[cirrussc]

Hm, scheint so weit in grenzen zu sein - doch warum keine Count Angaben da sind - versteh ich nicht.

Das scheint deine HDD laut den Angaben gar nicht zu können.
Ältere Festplatten laden die Köpfe noch nicht auf eine Rampe, sondern in die Mitte auf die Landezone.
Deine Spin-Stops zeigen sich also in den Start_Stop_Count, welche nicht höher sein können als Power_Cycle_Count und das sieht für 56 Betreibsstunden eigentlich ok aus.

Mit hdparm könntest Du das Powermanagement der HDD ganz abschalten.

[mosa]

Hallo cirrussc,
meinst Du sowas in dieser Richting?

Code: Alles auswählen

snow:~# hdparm -B 255 /dev/sda

PS: gibts eine Möglichkeit den Lüfter zu regulieren?
Danke