ich habe versucht mit einer Privatix- LiveCD ein abgesichertes Debian-Lenny auf
einen 4 GB USB-Stick zu installieren.
ISO-Datei von : http://mandalka.name/privatix/download.html
Dokumentation :http://mandalka.name/privatix/doc.html
Die Installation lief ohne Problem ab nur das Booten von dem USB Stick
kommt nicht zustande. Beim prompt erscheint auf dem Bildschirm nur
der Text... GRUB und ein blinkender Cursor....keine weitere Eingabe ist möglich.
So wurde der Stick partitioniert :
Code: Alles auswählen
oot@AMD2:~# disktype /dev/sdc
--- /dev/sdc
Block device, size 3.749 GiB (4025810432 bytes)
GRUB boot loader, compat version 3.2, boot drive 0xff
DOS/MBR partition map
Partition 1: 33.78 MiB (35425792 bytes, 69191 sectors from 1)
Type 0x0B (Win95 FAT32)
FAT16 file system (hints score 5 of 5)
Volume size 33.70 MiB (35338240 bytes, 17255 clusters of 2 KiB)
Volume name "Privatix"
Partition 2: 67.57 MiB (70852608 bytes, 138384 sectors from 69192)
Type 0x83 (Linux)
Ext3 file system
UUID 56BA6B0B-1F4E-4316-B66B-1E3E1D496D4B (DCE, v4)
Volume size 67.57 MiB (70852608 bytes, 69192 blocks of 1 KiB)
Partition 3: 3.648 GiB (3916574720 bytes, 7649560 sectors from 207576)
Type 0x83 (Linux)
Code: Alles auswählen
root@AMD2:~# fdisk -l
Platte /dev/sda: 80.0 GByte, 80026361856 Byte
Gerät boot. Anfang Ende Blöcke Id System
/dev/sda1 * 1 851 6835626 83 Linux
/dev/sda2 852 9729 71312535 5 Erweiterte
/dev/sda5 852 1134 2273166 82 Linux Swap / Solaris
/dev/sda6 1135 9729 69039306 83 Linux
Platte /dev/sdb: 80.0 GByte, 80060424192 Byte
Gerät boot. Anfang Ende Blöcke Id System
/dev/sdb1 1 851 6835626 83 Linux
/dev/sdb2 852 9733 71344665 5 Erweiterte
/dev/sdb5 9452 9733 2265133+ 82 Linux Swap / Solaris
/dev/sdb6 852 9451 69079437 83 Linux
Platte /dev/sdc: 4025 MByte, 4025810432 Byte
124 Köpfe, 62 Sektoren/Spuren, 1022 Zylinder
Einheiten = Zylinder von 7688 × 512 = 3936256 Bytes
Disk identifier: 0x56aa062f
Gerät boot. Anfang Ende Blöcke Id System
/dev/sdc1 1 9 34595+ b W95 FAT32
/dev/sdc2 10 27 69192 83 Linux
/dev/sdc3 28 1022 3824780 83 Linux
Hier ein Auzug von der GRUB menu.lst :
Code: Alles auswählen
media/usb0/grub/menu.lst
default 0
timeout 5
color cyan/blue white/blue
title Debian GNU/Linux, kernel 2.6.26-1-486
root (hd0,1)
kernel /vmlinuz-2.6.26-1-486 root=/dev/mapper/root_crypt ro
initrd /initrd.img-2.6.26-1-486
title Debian GNU/Linux, kernel 2.6.26-1-486 (single-user mode)
root (hd0,1)
kernel /vmlinuz-2.6.26-1-486 root=/dev/mapper/root_crypt ro single
initrd /initrd.img-2.6.26-1-486
Code: Alles auswählen
/media/usb0/grub/device.map
(hd0) /dev/sda
zustande kommt.
Was mir auffiel ist, dass als root (hd0,1) angezogen wird...hd0 ist doch sda..
müsste da nicht hd2,1 für sdc2 stehen
