ich habe versucht auf meinen vserver wo Debian am laufen ist mit Mocks
einen Socks5 Server aufzusetzten.
Der Server rennt soweit allerdings nur ohne Benutzer name und Passwort.
Sobald ich in die mocks.conf einen Bneutzer und Password angebe lässt sich die nicht ausführen per Shell
Hier ein auszug meiner Config
Code: Alles auswählen
################################################
# #
# Sample configuration file for MOCKS 0.0.2 #
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #
# #
# I recommend reading the examples in this file #
# and then extending it to suite your needs. #
# #
#################################################
#########################
#
# General daemon config
# ~~~~~~~~~~~~~~~~~~~~~
#
#########################
PORT = 10080 # Port MOCKS is to listen to
MOCKS_ADDR = 0.0.0.0 # IP adress MOCKS is to bind to
LOG_FILE = mocks.log # MOCKS log file
PID_FILE = mocks.pid # File holding MOCKS's process ID
BUFFER_SIZE = 65536 # Traffic buffer size in bytes
BACKLOG = 5 # Backlog for listen()
NEGOTIATION_TIMEOUT = 5
CONNECTION_IDLE_TIMEOUT = 300
BIND_TIMEOUT = 30
SHUTDOWN_TIMEOUT = 3
MAX_CONNECTIONS = 50
##########################################################################
#
# Client filter config
# ~~~~~~~~~~~~~~~~~~~~
#
# Client filtering means sorting out which clients are allowed
# connection and which are not. This is basically done like this:
# MOCKS has a default behaviour regarding filtering client
# connections. This behaviour is called the 'policy' and can either
# be to ALLOW or to DENY the connection. After setting the policy
# you can specify a list of exceptions. The action MOCKS takes
# for a client matching any of these exceptions is the opposite
# of the policy (that is, if the policy is set to ALLOW the exceptions
# are denied and if the policy is set to DENY the exceptions are allowed).
# An exception is specified in the form ip_address/mask, where mask
# is optional and is an integer ranging from 0 to 32 identifying the
# number of common heading bits that ip_address and the client's IP
# address must have in order to yield a match. If mask is missing,
# 32 will be assumed. For instance, 192.168.1.0/24 will match any IP
# ranging from 192.168.1.1 to 192.168.1.255.
#
# Let's take two examples, one for each type of policy. Let's say we
# only want to allow IPs 10.12.0.0 through 10.12.255.255, 172.23.2.5 and
# 192.168.52.26 to use MOCKS. What we have to to is this:
#
# FILTER_POLICY = DENY
# FILTER_EXCEPTION = 10.12.0.0/16
# FILTER_EXCEPTION = 172.23.2.5 # implied /32
# FILTER_EXCEPTION = 192.168.52.26 # implied /32
#
# Now, let's say this is a public proxy server, but for some reason
# you don't want to let any IP ranging from 192.168.1.1 to 192.168.1.255
# and neither 10.2.5.13 to connect to it:
#
# FILTER_POLICY = ALLOW
# FILTER_EXCEPTION = 192.168.1.0/24
# FILTER_EXCEPTION = 10.2.5.13
#
###########################################################################
FILTER_POLICY = ALLOW
#############################################################################
#
# Upstream proxy config
# ~~~~~~~~~~~~~~~~~~~~~
#
# You can choose to further relay traffic through another proxy server.
# MOCKS supports upstream HTTP CONNECT, SOCKS4 and SOCKS5 proxies. You
# must specify the proxy type (one of HTTPCONNECT, SOCKS4 or SOCKS5), the
# proxy address and the proxy port. Optionally you can specify an user
# name and a password used to authenicate to the upstream proxy. This is
# pretty straight forward, so let's just take an example. Let's say you
# want to use the HTTP CONNECT server at httpconnectproxy.com, on port 3128,
# using the username 'foo' and the password 'bar'. You do it like this:
#
# UP_PROXY_TYPE = HTTPCONNECT
# UP_PROXY_ADDR = httpconnectproxy.com
# UP_PROXY_PORT = 3128
# UP_PROXY_USER = me # These two can be missing if you
# UP_PROXY_PASSWD = test # are not required to authenticate
#
#############################################################################
# UP_PROXY_TYPE = HTTPCONNECT
# UP_PROXY_ADDR = 192.168.1.12
# UP_PROXY_PORT = 3128
Sofern ich oben unter Max
USERNAME =
PASSWORD =
Rein setzte sagt er mir
Missing or bad configuration file
Einen Socks Server ohne Benutzer und Password laufen zu lassen is mir zu riskant
Hatte mocks früher schon einmal drauf und mir die Conf darmals gesichert.
Nur weis ich leider nicht genau was darmals gemacht wurde damit die benutzer und passwor setzung erfoglreich wurde
Weis einer weiter vlt ?
ich gebe dir einen Tipp :