Etch und VMware

[mymain]

Hallo,

wenn Etch im VMwarplayer läuft kriege ich über die virtuelle Netzwerkschnittstelle keine IP zugewiesen
dhcp.conf

Code: Alles auswählen

# Configuration file for ISC 2.0b6pl1 vmnet-dhcpd operating on vmnet1.
#
# This file was automatically generated by the VMware configuration program.
# If you modify it, it will be backed up the next time you run the
# configuration program.
#
# We set domain-name-servers to make some DHCP clients happy
# (dhclient as configued in SuSE, TurboLinux, etc.).
# We also supply a domain name to make pump (Red Hat 6.x) happy.
#
allow unknown-clients;
default-lease-time 1800;                # 30 minutes
max-lease-time 7200;                    # 2 hours

subnet 192.168.239.0 netmask 255.255.255.0 {
    range 192.168.239.128 192.168.239.254;
    option broadcast-address 192.168.239.255;
    option domain-name-servers 192.168.239.1;
    option domain-name "localdomain";

Bei Windows-XP funktioniert alles, auch Samba.

[Hosi]

Dann poste doch mal die Ausgabe von "dhclient eth0" auf dem Etch, das innerhalb VMware läuft.

[mymain]

Code: Alles auswählen

mars:~# dhclient
There is already a pid file /var/run/dhclient.pid with pid 3517
killed old client process, removed PID file
Internet Systems Consortium DHCP Client V3.0.4
Copyright 2004-2006 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/

Listening on LPF/eth0/00:0c:29:b9:67:18
Sending on   LPF/eth0/00:0c:29:b9:67:18
Sending on   Socket/fallback
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7
No DHCPOFFERS received.
No working leases in persistent database - sleeping.

[Hosi]

Und das vmnet0 auf dem Rechner auf dem auch VMware läuft ist als Bridge eingerichtet (und nicht etwa als NAT)?

Wenn Du /etc/init.d/vmware restart machst, sollte in dmesg sowas auftauchen:

Code: Alles auswählen

bridge-eth0: enabling the bridge
bridge-eth0: up
bridge-eth0: already up
bridge-eth0: attached
/dev/vmnet: open called by PID 16525 (vmnet-natd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 16538 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 16549 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 16567 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 16573 (vmnet-dhcpd)
/dev/vmnet: port on hub 8 successfully opened

[mymain]

ist als host-only eingerichtent:

Code: Alles auswählen

erde:~# /etc/init.d/vmware restart
Stopping VMware services:
   Virtual machine monitor                                             done
   Blocking file system:                                               done
   Bridged networking on /dev/vmnet0                                   done
   Host network detection                                              done
   DHCP server on /dev/vmnet1                                          done
   Host-only networking on /dev/vmnet1                                 done
   Virtual ethernet                                                    done
Starting VMware services:
   Virtual machine monitor                                             done
   Blocking file system:                                               done
   Virtual ethernet                                                    done
   Bridged networking on /dev/vmnet0                                   done
   Host network detection                                              done
   Host-only networking on /dev/vmnet1 (background)                    done
   DHCP server on /dev/vmnet1                                          done