wlan bricht ständig ab/manuelles neustarten nötig (Belkin)

Einrichten des lokalen Netzes, Verbindung zu anderen Computern und Diensten.
Antworten
wubuntu
Beiträge: 61
Registriert: 20.06.2007 18:28:56
Wohnort: Reutlingen

wlan bricht ständig ab/manuelles neustarten nötig (Belkin)

Beitrag von wubuntu » 24.06.2007 18:36:20

hi jungs und mädels,


habe ein kleines problem mit meiner belkin karte.

habe den treiber rt61 installiert und das netzwerk eingerichtet.

wird beim booten auch automatisch geladen und verbunden.

aber dann: nach ca 2-5 minuten bricht die verbindunge dann ab.

öffne ich dann den netzwerkmanager und klicke auf eigenschaften dann verbindet er sich wieder.

kein problem dann.

beim nächsten neustart dasselbe spiel!!

kann mir jemand dabei helfen?oder vieleicht einen ansatz liefern?

:?

greez wubuntu

Benutzeravatar
raina
Beiträge: 206
Registriert: 10.02.2004 18:29:42
Wohnort: Berlin

Beitrag von raina » 24.06.2007 18:40:39

Seht diesbezüglich was in /var/log/messages ?
Debian kaputt?
http://www.debianforum.de
Windows kaputt?
Hotline: 0180 5 67 23 30 (Support-Anfragen werden mit 75,00 € + MwSt. pro Anfrage berechnet)

wubuntu
Beiträge: 61
Registriert: 20.06.2007 18:28:56
Wohnort: Reutlingen

Beitrag von wubuntu » 24.06.2007 18:45:53

also da steht folgendes seit letzten restart:

Code: Alles auswählen

Jun 24 18:22:00 localhost syslogd 1.4.1#20: restart.
Jun 24 18:22:00 localhost kernel: klogd 1.4.1#20, log source = /proc/kmsg started.
Jun 24 18:22:00 localhost kernel: Linux version 2.6.18-4-686 (Debian 2.6.18.dfsg.1-12etch2) (dannf@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Wed May 9 23:03:12 UTC 2007
Jun 24 18:22:00 localhost kernel: BIOS-provided physical RAM map:
Jun 24 18:22:00 localhost kernel:  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Jun 24 18:22:00 localhost kernel:  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Jun 24 18:22:00 localhost kernel:  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Jun 24 18:22:00 localhost kernel:  BIOS-e820: 0000000000100000 - 000000002f7d0000 (usable)
Jun 24 18:22:00 localhost kernel:  BIOS-e820: 000000002f7d0000 - 000000002f7e0000 (reserved)
Jun 24 18:22:00 localhost kernel:  BIOS-e820: 000000002f7e0000 - 000000002f7e8000 (ACPI data)
Jun 24 18:22:00 localhost kernel:  BIOS-e820: 000000002f7e8000 - 000000002f800000 (ACPI NVS)
Jun 24 18:22:00 localhost kernel:  BIOS-e820: 000000002f800000 - 0000000030000000 (reserved)
Jun 24 18:22:00 localhost kernel:  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Jun 24 18:22:00 localhost kernel: user-defined physical RAM map:
Jun 24 18:22:00 localhost kernel:  user: 0000000000000000 - 000000000009fc00 (usable)
Jun 24 18:22:00 localhost kernel:  user: 000000000009fc00 - 00000000000a0000 (reserved)
Jun 24 18:22:00 localhost kernel:  user: 00000000000f0000 - 0000000000100000 (reserved)
Jun 24 18:22:00 localhost kernel:  user: 0000000000100000 - 000000002f7d0000 (usable)
Jun 24 18:22:00 localhost kernel: 0MB HIGHMEM available.
Jun 24 18:22:00 localhost kernel: 759MB LOWMEM available.
Jun 24 18:22:00 localhost kernel: DMI 2.3 present.
Jun 24 18:22:00 localhost kernel: ACPI: PM-Timer IO Port: 0xf108
Jun 24 18:22:00 localhost kernel: Allocating PCI resources starting at 30000000 (gap: 2f7d0000:d0830000)
Jun 24 18:22:00 localhost kernel: Detected 1199.925 MHz processor.
Jun 24 18:22:00 localhost kernel: Built 1 zonelists.  Total pages: 194512
Jun 24 18:22:00 localhost kernel: Kernel command line: root=/dev/hda8 ro quiet splash=silent vga=791 i8042.nomux=1 mem=778048K
Jun 24 18:22:00 localhost kernel: Local APIC disabled by BIOS -- you can enable it with "lapic"
Jun 24 18:22:00 localhost kernel: Enabling fast FPU save and restore... done.
Jun 24 18:22:00 localhost kernel: Enabling unmasked SIMD FPU exception support... done.
Jun 24 18:22:00 localhost kernel: Initializing CPU#0
Jun 24 18:22:00 localhost kernel: PID hash table entries: 4096 (order: 12, 16384 bytes)
Jun 24 18:22:00 localhost kernel: Console: colour dummy device 80x25
Jun 24 18:22:00 localhost kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Jun 24 18:22:00 localhost kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Jun 24 18:22:00 localhost kernel: Memory: 762416k/778048k available (1544k kernel code, 15028k reserved, 577k data, 196k init, 0k highmem)
Jun 24 18:22:00 localhost kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Jun 24 18:22:00 localhost kernel: Calibrating delay using timer specific routine.. 2401.44 BogoMIPS (lpj=4802883)
Jun 24 18:22:00 localhost kernel: Security Framework v1.0.0 initialized
Jun 24 18:22:00 localhost kernel: SELinux:  Disabled at boot.
Jun 24 18:22:00 localhost kernel: Capability LSM initialized
Jun 24 18:22:00 localhost kernel: Mount-cache hash table entries: 512
Jun 24 18:22:00 localhost kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
Jun 24 18:22:00 localhost kernel: CPU: L2 cache: 256K
Jun 24 18:22:00 localhost kernel: Intel machine check architecture supported.
Jun 24 18:22:00 localhost kernel: Intel machine check reporting enabled on CPU#0.
Jun 24 18:22:00 localhost kernel: Compat vDSO mapped to ffffe000.
Jun 24 18:22:00 localhost kernel: Checking 'hlt' instruction... OK.
Jun 24 18:22:00 localhost kernel: SMP alternatives: switching to UP code
Jun 24 18:22:00 localhost kernel: Freeing SMP alternatives: 16k freed
Jun 24 18:22:00 localhost kernel: ACPI: Core revision 20060707
Jun 24 18:22:00 localhost kernel: ACPI: setting ELCR to 0200 (from 0800)
Jun 24 18:22:00 localhost kernel: CPU0: Intel Mobile Intel(R) Celeron(TM) CPU         1200MHz stepping 04
Jun 24 18:22:00 localhost kernel: SMP motherboard not detected.
Jun 24 18:22:00 localhost kernel: Local APIC not detected. Using dummy APIC emulation.
Jun 24 18:22:00 localhost kernel: Brought up 1 CPUs
Jun 24 18:22:00 localhost kernel: migration_cost=0
Jun 24 18:22:00 localhost kernel: checking if image is initramfs... it is
Jun 24 18:22:00 localhost kernel: Freeing initrd memory: 5463k freed
Jun 24 18:22:00 localhost kernel: NET: Registered protocol family 16
Jun 24 18:22:00 localhost kernel: ACPI: bus type pci registered
Jun 24 18:22:00 localhost kernel: PCI: PCI BIOS revision 2.10 entry at 0xf0200, last bus=1
Jun 24 18:22:00 localhost kernel: PCI: Using configuration type 1
Jun 24 18:22:00 localhost kernel: Setting up standard PCI resources
Jun 24 18:22:00 localhost kernel: ACPI: Interpreter enabled
Jun 24 18:22:00 localhost kernel: ACPI: Using PIC for interrupt routing
Jun 24 18:22:00 localhost kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Jun 24 18:22:00 localhost kernel: PCI quirk: region f100-f17f claimed by ICH4 ACPI/GPIO/TCO
Jun 24 18:22:00 localhost kernel: PCI quirk: region f200-f23f claimed by ICH4 GPIO
Jun 24 18:22:00 localhost kernel: PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Jun 24 18:22:00 localhost kernel: PCI: Firmware left 0000:01:08.0 e100 interrupts enabled, disabling
Jun 24 18:22:00 localhost kernel: PCI: Transparent bridge - 0000:00:1e.0
Jun 24 18:22:00 localhost kernel: PCI: Bus #02 (-#05) is hidden behind transparent bridge #01 (-#01) (try 'pci=assign-busses')
Jun 24 18:22:00 localhost kernel: Please report the result to linux-kernel to fix this permanently
Jun 24 18:22:00 localhost kernel: ACPI: PCI Interrupt Link [PILA] (IRQs 3 4 5 6 7 9 *11 12 14 15)
Jun 24 18:22:00 localhost kernel: ACPI: PCI Interrupt Link [PILB] (IRQs 3 4 5 6 7 9 *11 12 14 15)
Jun 24 18:22:00 localhost kernel: ACPI: PCI Interrupt Link [PILC] (IRQs 3 4 5 6 7 9 *11 12 14 15)
Jun 24 18:22:00 localhost kernel: ACPI: PCI Interrupt Link [PILD] (IRQs 3 4 5 6 7 9 *11 12 14 15)
Jun 24 18:22:00 localhost kernel: ACPI: PCI Interrupt Link [PILE] (IRQs 3 4 5 6 7 9 *11 12 14 15)
Jun 24 18:22:00 localhost kernel: ACPI: PCI Interrupt Link [PILF] (IRQs 3 4 5 6 7 9 *11 12 14 15)
Jun 24 18:22:00 localhost kernel: ACPI: PCI Interrupt Link [PILG] (IRQs 3 4 5 6 7 9 11 12 14 15) *0, disabled.
Jun 24 18:22:00 localhost kernel: ACPI: PCI Interrupt Link [PILH] (IRQs 3 4 5 6 7 9 11 12 14 15) *0, disabled.
Jun 24 18:22:00 localhost kernel: ACPI: Embedded Controller [EC0] (gpe 29) interrupt mode.
Jun 24 18:22:00 localhost kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Jun 24 18:22:00 localhost kernel: pnp: PnP ACPI init
Jun 24 18:22:00 localhost kernel: pnp: PnP ACPI: found 11 devices
Jun 24 18:22:00 localhost kernel: PnPBIOS: Disabled by ACPI PNP
Jun 24 18:22:00 localhost kernel: PCI: Using ACPI for IRQ routing
Jun 24 18:22:00 localhost kernel: PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Jun 24 18:22:00 localhost kernel: pnp: 00:0a: ioport range 0xf100-0xf16f could not be reserved
Jun 24 18:22:00 localhost kernel: pnp: 00:0a: ioport range 0xf178-0xf17f has been reserved
Jun 24 18:22:00 localhost kernel: pnp: 00:0a: ioport range 0xf200-0xf23f has been reserved
Jun 24 18:22:00 localhost kernel: pnp: 00:0a: ioport range 0x380-0x38f has been reserved
Jun 24 18:22:00 localhost kernel: pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved
Jun 24 18:22:00 localhost kernel: pnp: 00:0a: ioport range 0x580-0x587 has been reserved
Jun 24 18:22:00 localhost kernel: PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
Jun 24 18:22:00 localhost kernel: PCI: Bus 2, cardbus bridge: 0000:01:09.0
Jun 24 18:22:00 localhost kernel:   IO window: 00007400-000074ff
Jun 24 18:22:00 localhost kernel:   IO window: 00007800-000078ff
Jun 24 18:22:00 localhost kernel:   PREFETCH window: 30000000-31ffffff
Jun 24 18:22:00 localhost kernel:   MEM window: 34000000-35ffffff
Jun 24 18:22:00 localhost kernel: PCI: Bridge: 0000:00:1e.0
Jun 24 18:22:00 localhost kernel:   IO window: 7000-7fff
Jun 24 18:22:00 localhost kernel:   MEM window: 80100000-801fffff
Jun 24 18:22:00 localhost kernel:   PREFETCH window: 30000000-31ffffff
Jun 24 18:22:00 localhost kernel: ACPI: PCI Interrupt Link [PILB] enabled at IRQ 11
Jun 24 18:22:00 localhost kernel: ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [PILB] -> GSI 11 (level, low) -> IRQ 11
Jun 24 18:22:00 localhost kernel: NET: Registered protocol family 2
Jun 24 18:22:00 localhost kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Jun 24 18:22:00 localhost kernel: TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Jun 24 18:22:00 localhost kernel: TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Jun 24 18:22:00 localhost kernel: TCP: Hash tables configured (established 131072 bind 65536)
Jun 24 18:22:00 localhost kernel: TCP reno registered
Jun 24 18:22:00 localhost kernel: Simple Boot Flag at 0x41 set to 0x1
Jun 24 18:22:00 localhost kernel: audit: initializing netlink socket (disabled)
Jun 24 18:22:00 localhost kernel: audit(1182709294.396:1): initialized
Jun 24 18:22:00 localhost kernel: VFS: Disk quotas dquot_6.5.1
Jun 24 18:22:00 localhost kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jun 24 18:22:00 localhost kernel: Initializing Cryptographic API
Jun 24 18:22:00 localhost kernel: io scheduler noop registered
Jun 24 18:22:00 localhost kernel: io scheduler anticipatory registered
Jun 24 18:22:00 localhost kernel: io scheduler deadline registered
Jun 24 18:22:00 localhost kernel: io scheduler cfq registered (default)
Jun 24 18:22:00 localhost kernel: vesafb: framebuffer at 0x98000000, mapped to 0xf0080000, using 3072k, total 8000k
Jun 24 18:22:00 localhost kernel: vesafb: mode is 1024x768x16, linelength=2048, pages=4
Jun 24 18:22:00 localhost kernel: vesafb: protected mode interface info at 00ff:44f0
Jun 24 18:22:00 localhost kernel: vesafb: scrolling: redraw
Jun 24 18:22:00 localhost kernel: vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Jun 24 18:22:00 localhost kernel: Console: switching to colour frame buffer device 128x48
Jun 24 18:22:00 localhost kernel: fb0: VESA VGA frame buffer device
Jun 24 18:22:00 localhost kernel: isapnp: Scanning for PnP cards...
Jun 24 18:22:00 localhost kernel: isapnp: No Plug & Play device found
Jun 24 18:22:00 localhost kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Jun 24 18:22:00 localhost kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jun 24 18:22:00 localhost kernel: 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jun 24 18:22:00 localhost kernel: ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [PILB] -> GSI 11 (level, low) -> IRQ 11
Jun 24 18:22:00 localhost kernel: ACPI: PCI interrupt for device 0000:00:1f.6 disabled
Jun 24 18:22:00 localhost kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Jun 24 18:22:00 localhost kernel: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Jun 24 18:22:00 localhost kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Jun 24 18:22:00 localhost kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Jun 24 18:22:00 localhost kernel: mice: PS/2 mouse device common for all mice
Jun 24 18:22:00 localhost kernel: TCP bic registered
Jun 24 18:22:00 localhost kernel: NET: Registered protocol family 1
Jun 24 18:22:00 localhost kernel: NET: Registered protocol family 17
Jun 24 18:22:00 localhost kernel: NET: Registered protocol family 8
Jun 24 18:22:00 localhost kernel: NET: Registered protocol family 20
Jun 24 18:22:00 localhost kernel: Using IPI No-Shortcut mode
Jun 24 18:22:00 localhost kernel: ACPI: (supports S0 S1 S3 S4 S5)
Jun 24 18:22:00 localhost kernel: Freeing unused kernel memory: 196k freed
Jun 24 18:22:00 localhost kernel: Time: tsc clocksource has been installed.
Jun 24 18:22:00 localhost kernel: input: AT Translated Set 2 keyboard as /class/input/input0
Jun 24 18:22:00 localhost kernel: ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
Jun 24 18:22:00 localhost kernel: ACPI: Thermal Zone [THR1] (83 C)
Jun 24 18:22:00 localhost kernel: ACPI: Thermal Zone [THR2] (45 C)
Jun 24 18:22:00 localhost kernel: usbcore: registered new driver usbfs
Jun 24 18:22:00 localhost kernel: usbcore: registered new driver hub
Jun 24 18:22:00 localhost kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Jun 24 18:22:00 localhost kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jun 24 18:22:00 localhost kernel: ICH3M: IDE controller at PCI slot 0000:00:1f.1
Jun 24 18:22:00 localhost kernel: ACPI: Unable to derive IRQ for device 0000:00:1f.1
Jun 24 18:22:00 localhost kernel: ACPI: PCI Interrupt 0000:00:1f.1[A]: no GSI
Jun 24 18:22:00 localhost kernel: ICH3M: chipset revision 2
Jun 24 18:22:00 localhost kernel: ICH3M: not 100%% native mode: will probe irqs later
Jun 24 18:22:00 localhost kernel:     ide0: BM-DMA at 0xa890-0xa897, BIOS settings: hda:DMA, hdb:pio
Jun 24 18:22:00 localhost kernel:     ide1: BM-DMA at 0xa898-0xa89f, BIOS settings: hdc:DMA, hdd:pio
Jun 24 18:22:00 localhost kernel: USB Universal Host Controller Interface driver v3.0
Jun 24 18:22:00 localhost kernel: e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
Jun 24 18:22:00 localhost kernel: e100: Copyright(c) 1999-2005 Intel Corporation
Jun 24 18:22:00 localhost kernel: hda: TOSHIBA MK8032GAX, ATA DISK drive
Jun 24 18:22:00 localhost kernel: Time: acpi_pm clocksource has been installed.
Jun 24 18:22:00 localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jun 24 18:22:00 localhost kernel: hdc: HL-DT-STCD-RW/DVD DRIVE GCC-4240N, ATAPI CD/DVD-ROM drive
Jun 24 18:22:00 localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15
Jun 24 18:22:00 localhost kernel: ACPI: PCI Interrupt Link [PILA] enabled at IRQ 11
Jun 24 18:22:00 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [PILA] -> GSI 11 (level, low) -> IRQ 11
Jun 24 18:22:00 localhost kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Jun 24 18:22:00 localhost kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Jun 24 18:22:00 localhost kernel: uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000a4a0
Jun 24 18:22:00 localhost kernel: usb usb1: configuration #1 chosen from 1 choice
Jun 24 18:22:00 localhost kernel: hub 1-0:1.0: USB hub found
Jun 24 18:22:00 localhost kernel: hub 1-0:1.0: 2 ports detected
Jun 24 18:22:00 localhost kernel: hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Jun 24 18:22:00 localhost kernel: Uniform CD-ROM driver Revision: 3.20
Jun 24 18:22:00 localhost kernel: hda: max request size: 512KiB
Jun 24 18:22:00 localhost kernel: hda: 156301488 sectors (80026 MB), CHS=16383/255/63, UDMA(100)
Jun 24 18:22:00 localhost kernel: hda: cache flushes supported
Jun 24 18:22:00 localhost kernel:  hda: hda1 hda2 < hda5ACPI: PCI Interrupt Link [PILD] enabled at IRQ 11
Jun 24 18:22:00 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [PILD] -> GSI 11 (level, low) -> IRQ 11
Jun 24 18:22:00 localhost kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Jun 24 18:22:00 localhost kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Jun 24 18:22:00 localhost kernel: uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000a4e0
Jun 24 18:22:00 localhost kernel: usb usb2: configuration #1 chosen from 1 choice
Jun 24 18:22:00 localhost kernel: hub 2-0:1.0: USB hub found
Jun 24 18:22:00 localhost kernel: hub 2-0:1.0: 2 ports detected
Jun 24 18:22:00 localhost kernel:  hda6 hda7 hda8 >
Jun 24 18:22:00 localhost kernel: ACPI: PCI Interrupt Link [PILC] enabled at IRQ 11
Jun 24 18:22:00 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [PILC] -> GSI 11 (level, low) -> IRQ 11
Jun 24 18:22:00 localhost kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Jun 24 18:22:00 localhost kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
Jun 24 18:22:00 localhost kernel: uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000a800
Jun 24 18:22:00 localhost kernel: usb usb3: configuration #1 chosen from 1 choice
Jun 24 18:22:00 localhost kernel: hub 3-0:1.0: USB hub found
Jun 24 18:22:00 localhost kernel: hub 3-0:1.0: 2 ports detected
Jun 24 18:22:00 localhost kernel: ACPI: PCI Interrupt Link [PILE] enabled at IRQ 11
Jun 24 18:22:00 localhost kernel: ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [PILE] -> GSI 11 (level, low) -> IRQ 11
Jun 24 18:22:00 localhost kernel: e100: eth0: e100_probe: addr 0x80100000, irq 11, MAC addr 00:00:E2:8C:96:50
Jun 24 18:22:00 localhost kernel: Attempting manual resume
Jun 24 18:22:00 localhost kernel: kjournald starting.  Commit interval 5 seconds
Jun 24 18:22:00 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jun 24 18:22:00 localhost kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Jun 24 18:22:00 localhost kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Jun 24 18:22:00 localhost kernel: Linux agpgart interface v0.101 (c) Dave Jones
Jun 24 18:22:00 localhost kernel: agpgart: Detected an Intel 830M Chipset.
Jun 24 18:22:00 localhost kernel: agpgart: Detected 8060K stolen memory.
Jun 24 18:22:00 localhost kernel: agpgart: AGP aperture is 128M @ 0x98000000
Jun 24 18:22:00 localhost kernel: ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [PILB] -> GSI 11 (level, low) -> IRQ 11
Jun 24 18:22:00 localhost kernel: Yenta: CardBus bridge found at 0000:01:09.0 [1014:1017]
Jun 24 18:22:00 localhost kernel: Yenta: Enabling burst memory read transactions
Jun 24 18:22:00 localhost kernel: Yenta: Using CSCINT to route CSC interrupts to PCI
Jun 24 18:22:00 localhost kernel: Yenta: Routing CardBus interrupts to PCI
Jun 24 18:22:00 localhost kernel: Yenta TI: socket 0000:01:09.0, mfunc 0x01111c02, devctl 0x64
Jun 24 18:22:00 localhost kernel: Real Time Clock Driver v1.12ac
Jun 24 18:22:00 localhost kernel: input: PC Speaker as /class/input/input1
Jun 24 18:22:00 localhost kernel: Yenta: ISA IRQ mask 0x04f8, PCI irq 11
Jun 24 18:22:00 localhost kernel: Socket status: 30000020
Jun 24 18:22:00 localhost kernel: Yenta: Raising subordinate bus# of parent bus (#01) from #01 to #05
Jun 24 18:22:00 localhost kernel: pcmcia: parent PCI bridge I/O window: 0x7000 - 0x7fff
Jun 24 18:22:00 localhost kernel: cs: IO port probe 0x7000-0x7fff: clean.
Jun 24 18:22:00 localhost kernel: pcmcia: parent PCI bridge Memory window: 0x80100000 - 0x801fffff
Jun 24 18:22:00 localhost kernel: pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x31ffffff
Jun 24 18:22:00 localhost kernel: ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [PILB] -> GSI 11 (level, low) -> IRQ 11
Jun 24 18:22:00 localhost kernel: parport: PnPBIOS parport detected.
Jun 24 18:22:00 localhost kernel: parport0: PC-style at 0x378, irq 7 [PCSPP]
Jun 24 18:22:00 localhost kernel: NET: Registered protocol family 23
Jun 24 18:22:00 localhost kernel: IBM TrackPoint firmware: 0x0e, buttons: 3/3
Jun 24 18:22:00 localhost kernel: input: TPPS/2 IBM TrackPoint as /class/input/input2
Jun 24 18:22:00 localhost kernel: pnp: Device 00:08 activated.
Jun 24 18:22:00 localhost kernel: nsc-ircc, chip->init
Jun 24 18:22:00 localhost kernel: nsc-ircc, Found chip at base=0x02e
Jun 24 18:22:00 localhost kernel: nsc-ircc, driver loaded (Dag Brattli)
Jun 24 18:22:00 localhost kernel: IrDA: Registered device irda0
Jun 24 18:22:00 localhost kernel: nsc-ircc, Found dongle: HP HSDL-1100/HSDL-2100
Jun 24 18:22:00 localhost kernel: ts: Compaq touchscreen protocol output
Jun 24 18:22:00 localhost kernel: intel8x0_measure_ac97_clock: measured 55469 usecs
Jun 24 18:22:00 localhost kernel: intel8x0: clocking to 48000
Jun 24 18:22:00 localhost kernel: PCI: Enabling device 0000:00:1f.6 (0000 -> 0001)
Jun 24 18:22:00 localhost kernel: ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [PILB] -> GSI 11 (level, low) -> IRQ 11
Jun 24 18:22:00 localhost kernel: pccard: CardBus card inserted into slot 0
Jun 24 18:22:00 localhost kernel: cs: IO port probe 0x100-0x3af: clean.
Jun 24 18:22:00 localhost kernel: cs: IO port probe 0x3e0-0x4ff: clean.
Jun 24 18:22:00 localhost kernel: cs: IO port probe 0x820-0x8ff: clean.
Jun 24 18:22:00 localhost kernel: cs: IO port probe 0xc00-0xcf7: clean.
Jun 24 18:22:00 localhost kernel: cs: IO port probe 0xa00-0xaff: clean.
Jun 24 18:22:00 localhost kernel: PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
Jun 24 18:22:00 localhost kernel: ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [PILB] -> GSI 11 (level, low) -> IRQ 11
Jun 24 18:22:00 localhost kernel: rt61 1.1.0 Beta 2 CVS http://rt2x00.serialmonkey.com
Jun 24 18:22:00 localhost kernel: RT61: Vendor = 0x1814, Product = 0x0301 
Jun 24 18:22:00 localhost kernel: Adding 793760k swap on /dev/hda6.  Priority:-1 extents:1 across:793760k
Jun 24 18:22:00 localhost kernel: EXT3 FS on hda8, internal journal
Jun 24 18:22:00 localhost kernel: loop: loaded (max 8 devices)
Jun 24 18:22:00 localhost kernel: device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
Jun 24 18:22:00 localhost kernel: fuse init (API version 7.7)
Jun 24 18:22:00 localhost kernel: kjournald starting.  Commit interval 5 seconds
Jun 24 18:22:00 localhost kernel: EXT3 FS on hda7, internal journal
Jun 24 18:22:00 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jun 24 18:22:00 localhost kernel: pcmcia: Detected deprecated PCMCIA ioctl usage from process: discover.
Jun 24 18:22:00 localhost kernel: pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
Jun 24 18:22:00 localhost kernel: pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
Jun 24 18:22:00 localhost kernel: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
Jun 24 18:22:00 localhost kernel: cs: memory probe 0x80100000-0x801fffff: excluding 0x80100000-0x801fffff
Jun 24 18:22:00 localhost kernel: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
Jun 24 18:22:00 localhost kernel: cs: memory probe 0x30000000-0x31ffffff: excluding 0x30000000-0x31ffffff
Jun 24 18:22:00 localhost kernel: cs: warning: no high memory space available!
Jun 24 18:22:00 localhost kernel: RT61: RfIcType= 3
Jun 24 18:22:00 localhost kernel: NET: Registered protocol family 10
Jun 24 18:22:00 localhost kernel: lo: Disabled Privacy Extensions
Jun 24 18:22:00 localhost kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Jun 24 18:22:00 localhost kernel: IPv6 over IPv4 tunneling driver
Jun 24 18:22:02 localhost hpiod: 1.6.10 accepting connections at 2208... 
Jun 24 18:22:04 localhost kernel: ACPI: Battery Slot [BAT0] (battery present)
Jun 24 18:22:04 localhost kernel: ACPI: AC Adapter [AC] (off-line)
Jun 24 18:22:04 localhost kernel: ACPI: Power Button (FF) [PWRF]
Jun 24 18:22:04 localhost kernel: ACPI: Sleep Button (CM) [SLPB]
Jun 24 18:22:04 localhost kernel: ACPI: Lid Switch [LID]
Jun 24 18:22:04 localhost kernel: lp0: using parport0 (interrupt-driven).
Jun 24 18:22:04 localhost kernel: ppdev: user-space parallel port driver
Jun 24 18:22:09 localhost dhcdbd: Started up.
Jun 24 18:22:11 localhost kernel: [drm] Initialized drm 1.0.1 20051102
Jun 24 18:22:11 localhost kernel: ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [PILA] -> GSI 11 (level, low) -> IRQ 11
Jun 24 18:22:11 localhost kernel: [drm] Initialized i915 1.5.0 20060119 on minor 0
Jun 24 18:22:11 localhost kernel: [drm] Initialized i915 1.5.0 20060119 on minor 1
Jun 24 18:22:13 localhost kernel: Bluetooth: Core ver 2.10
Jun 24 18:22:13 localhost kernel: NET: Registered protocol family 31
Jun 24 18:22:13 localhost kernel: Bluetooth: HCI device and connection manager initialized
Jun 24 18:22:13 localhost kernel: Bluetooth: HCI socket layer initialized
Jun 24 18:22:13 localhost kernel: Bluetooth: L2CAP ver 2.8
Jun 24 18:22:13 localhost kernel: Bluetooth: L2CAP socket layer initialized
Jun 24 18:22:13 localhost kernel: Bluetooth: RFCOMM socket layer initialized
Jun 24 18:22:13 localhost kernel: Bluetooth: RFCOMM TTY layer initialized
Jun 24 18:22:13 localhost kernel: Bluetooth: RFCOMM ver 1.8
Jun 24 18:42:01 localhost -- MARK --

wubuntu
Beiträge: 61
Registriert: 20.06.2007 18:28:56
Wohnort: Reutlingen

Beitrag von wubuntu » 29.06.2007 08:33:34

hat keiner eine lösung oder lösungsansatz für dieses problem?
ist echt nervig, dass ich nach einigen minuten die verbindung wieder manuell herstellen muss!

(grad als dieses schrieb, musste ich wieder verbinden :twisted: )

<push> :wink:

wubuntu
Beiträge: 61
Registriert: 20.06.2007 18:28:56
Wohnort: Reutlingen

Beitrag von wubuntu » 06.07.2007 12:16:05

also nachdem ich mich nun ziemlich totgegooglet habe und dinge mit wifi-radar und dergleichen
ausprobiert habe, bin ich immer noch ratlos:

also villeicht kann mir ja doch jemand helfen:

wenn ich wlan manuell wieder starte läuft es problemlos solnage ich will.

iwlist:

Code: Alles auswählen

 iwlist scan
lo        Interface doesn't support scanning.

eth0      Interface doesn't support scanning.

irda0     Interface doesn't support scanning.

ra0       Scan completed :
          Cell 01 - Address: 00:14:7F:77:5E:65
                    ESSID:"SpeedTouch818B05"
                    Mode:Managed
                    Channel:1
                    Encryption key:on
                    Quality:0/100  Signal level:-75 dBm  Noise level:-256 dBm
          Cell 02 - Address: 00:17:9A:6F:1C:7F
                    ESSID:"Wolfman"
                    Mode:Managed
                    Channel:6
                    Encryption key:on
                    Quality:0/100  Signal level:-59 dBm  Noise level:-256 dBm

Code: Alles auswählen

cat /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface



iface ra0 inet dhcp
wireless-mode Managed
wireless-essid meine essid
wireless-key s:mein key

auto ra0
wifi-radar und networkmanager sind deinstalliert und gepurget.

braucht ihr noch mehr angaben?

gruß



ach ja: habe auch den avahi-daemon ausgeschaltet (hab in irgendeinem forum gelesen dass das hilt),
bring jedoch auch nichts :(

wubuntu
Beiträge: 61
Registriert: 20.06.2007 18:28:56
Wohnort: Reutlingen

Beitrag von wubuntu » 08.07.2007 14:51:07

wird auch hier diskutiert:
http://forum.ubuntuusers.de/topic/10070 ... ht=wubuntu

vielleicht kann jemand mit diesen Infos dort etas mehr anfangen.

Antworten