Hallo Leute!
Irgendwie blicke ich in der Englischen Anleitung nett durch!
Ich hab Etch.. Hab den 4800 am Parallel Port angeschlossen!
Hab auch gelesen, das er von SANE unterstützt wird.
Aber ich blick nicht wie ich nun das richtig installiere..
Kann mir bitte mal jemand sagen wie das Schritt für Schritt geht?
Wäre echt klasse. Da ich durch die Engl. DOC nicht durchblicke was ich da machen soll..
cu Deta
Primax 4800 Direct und Sane
Kann mir keiner Helfen...
Weder
scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
noch
sane-find-scanner -p
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x0d46 [KOBIL], product=0x2012 [USB Adapter K]) at libusb:002:003
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# No Mustek parallel port scanners found. If you expected something
# different, make sure the scanner is correctly connected to your computer
# and you have apropriate access rights.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
Wird mein Paralell Port Scanner gefunden! Nur der Card Reader *g*
Ich weis echt nicht weiter..
Bitte um Hilfe.
cu Deta
Weder
scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
noch
sane-find-scanner -p
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x0d46 [KOBIL], product=0x2012 [USB Adapter K]) at libusb:002:003
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# No Mustek parallel port scanners found. If you expected something
# different, make sure the scanner is correctly connected to your computer
# and you have apropriate access rights.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
Wird mein Paralell Port Scanner gefunden! Nur der Card Reader *g*
Ich weis echt nicht weiter..
Bitte um Hilfe.
cu Deta
Ich hab festgestelt, das der Treiber für den Plustek nicht vorhanden ist..
Aber wenn ich den versuche zu erstellen, sagt er mir das die Dateien nicht da sin! Ist ja falsch! Diese sind
aber da! Hat jemand ne Idee oder was das ist...
---
deta:/home/deta/sane/doc/plustek# ./MakeModule.sh
This script will try and build a suitable kernel-module for your system.
If you'd like to make the module WITH debug output, restart this script
with as follows:
./MakeModule.sh DEBUG=y
Press <ENTER> to continue or <CTRL><C> to cancel.
Check for root - done.
Check for kernelversion:
Using makefile for kernel 2.6.x
Build-directory:
/home/deta/sane/doc/plustek/build
Removing build-directory - done.
Creating build-directory - done.
Linking source files...ls: /home/deta/sane/doc/plustek/../../backend/plustek-pp_*.h: Datei oder Verzeichnis nicht gefunden
- done.
Copying Makefile to build-directory - done.
Making the module...
make: *** /lib/modules/2.6.18-4-686/build/: Datei oder Verzeichnis nicht gefunden. Schluss.
There were some build errors...
deta:/home/deta/sane/doc/plustek# cd /home/deta/sane/doc/plustek/../../backend/
deta:/home/deta/sane/backend# ls
plustek_pp.c plustek-pp_io.c plustek-pp_p48xx.c
plustek_pp.conf.in plustek-pp_map.c plustek-pp_p9636.c
plustek-pp_dac.c plustek-pp_misc.c plustek-pp_procfs.c
plustek-pp_detect.c plustek-pp_models.c plustek-pp_ptdrv.c
plustek-pp_genericio.c plustek-pp_motor.c plustek-pp_scale.c
plustek-pp.h plustek-pp_p12.c plustek-pp_tpa.c
plustek-pp_image.c plustek-pp_p12ccd.c plustek-pp_wrapper.c
deta:/home/deta/sane/backend#
---
Aber wenn ich den versuche zu erstellen, sagt er mir das die Dateien nicht da sin! Ist ja falsch! Diese sind
aber da! Hat jemand ne Idee oder was das ist...
---
deta:/home/deta/sane/doc/plustek# ./MakeModule.sh
This script will try and build a suitable kernel-module for your system.
If you'd like to make the module WITH debug output, restart this script
with as follows:
./MakeModule.sh DEBUG=y
Press <ENTER> to continue or <CTRL><C> to cancel.
Check for root - done.
Check for kernelversion:
Using makefile for kernel 2.6.x
Build-directory:
/home/deta/sane/doc/plustek/build
Removing build-directory - done.
Creating build-directory - done.
Linking source files...ls: /home/deta/sane/doc/plustek/../../backend/plustek-pp_*.h: Datei oder Verzeichnis nicht gefunden
- done.
Copying Makefile to build-directory - done.
Making the module...
make: *** /lib/modules/2.6.18-4-686/build/: Datei oder Verzeichnis nicht gefunden. Schluss.
There were some build errors...
deta:/home/deta/sane/doc/plustek# cd /home/deta/sane/doc/plustek/../../backend/
deta:/home/deta/sane/backend# ls
plustek_pp.c plustek-pp_io.c plustek-pp_p48xx.c
plustek_pp.conf.in plustek-pp_map.c plustek-pp_p9636.c
plustek-pp_dac.c plustek-pp_misc.c plustek-pp_procfs.c
plustek-pp_detect.c plustek-pp_models.c plustek-pp_ptdrv.c
plustek-pp_genericio.c plustek-pp_motor.c plustek-pp_scale.c
plustek-pp.h plustek-pp_p12.c plustek-pp_tpa.c
plustek-pp_image.c plustek-pp_p12ccd.c plustek-pp_wrapper.c
deta:/home/deta/sane/backend#
---