ich habe von sarge nach etch upgedatet.
Danach mounted ein RAID0 nicht mehr.
Lasse ich den alten Kernel 2.6.11.7 starten ist das Raid mountbar.
Mit 2.6.18-4-k7 SMP leider nicht.
Code: Alles auswählen
skor:/usr/share/doc/mdadm# mdadm -A /dev/md0
mdadm: /dev/md0 has been started with 2 drives.
skor:/usr/share/doc/mdadm# mount -a
mount: wrong fs type, bad option, bad superblock on /dev/md0,
missing codepage or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
skor:/usr/share/doc/mdadm# dmesg | tail -30
md: md0 stopped.
md: bind<sdc>
md: bind<sdb>
md0: setting max_sectors to 128, segment boundary to 32767
raid0: looking at sdb
raid0: comparing sdb(732389312) with sdb(732389312)
raid0: END
raid0: ==> UNIQUE
raid0: 1 zones
raid0: looking at sdc
raid0: comparing sdc(976519104) with sdb(732389312)
raid0: NOT EQUAL
raid0: comparing sdc(976519104) with sdc(976519104)
raid0: END
raid0: ==> UNIQUE
raid0: 2 zones
raid0: FINAL 2 zones
raid0: zone 1
raid0: checking sdb ... nope.
raid0: checking sdc ... contained as device 0
(976519104) is smallest!.
raid0: zone->nb_dev: 1, size: 244129792
raid0: current zone offset: 976519104
raid0: done.
raid0 : md_size is 1708908416 blocks.
raid0 : conf->hash_spacing is 1464778624 blocks.
raid0 : nb_zone is 2.
raid0 : Allocating 8 bytes for hash.
EXT3-fs error (device md0): ext3_check_descriptors: Block bitmap for group 880 not in group (block 0)!
EXT3-fs: group descriptors corrupted!
Danke
/kruppi