ich habe ein "kleines" Problem mit Networkmanager. Das Gnomeapplet zeigt mir keine Networkdevices an. Ich habe auch alle Devices bis auf lo in /etc/network/interfaces auskommentiert und auch bei auto rausgenommem. Sofern ich es richtig verstehe findet aber mein Hal/Dbus die Interfaces schon nicht
Also suche ich nach Ideen und / oder Lösungsansaätzen, wie ich meien Netzwerkinterfaces (eth0 onboard und eth1 ipw2100) dahingehend bewege, dass ich sie auch in hal sehe.hier ein paar Infos:
lshal:
Code: Alles auswählen
Dumping 10 device(s) from the Global Device List:
-------------------------------------------------
udi = '/org/freedesktop/Hal/devices/computer'
info.callouts.add = {'hal-storage-cleanup-all-mountpoints'} (string list)
org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = {'hal-system-power-suspend', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save'} (string list)
org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames = {'num_seconds_to_sleep', '', '', '', 'enable_power_save'} (string list)
org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = {'i', '', '', '', 'b'} (string list)
org.freedesktop.Hal.Device.SystemPowerManagement.method_names = {'Suspend', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave'} (string list)
info.interfaces = {'org.freedesktop.Hal.Device.SystemPowerManagement'} (string list)
info.addons = {'hald-addon-acpi', 'hald-addon-cpufreq'} (string list)
system.product = 'TravelMate 800 Rev 1' (string)
system.vendor = 'Acer' (string)
smbios.chassis.type = 'Notebook' (string)
smbios.chassis.manufacturer = 'Acer' (string)
smbios.system.uuid = '808FA190-9964-D711-9A47-00C09F14E0A3' (string)
smbios.system.serial = 'LXT25060373140063BEF00' (string)
smbios.system.version = 'Rev 1' (string)
smbios.system.product = 'TravelMate 800' (string)
smbios.system.manufacturer = 'Acer' (string)
smbios.bios.release_date = '07/30/2003' (string)
smbios.bios.version = '4A12' (string)
smbios.bios.vendor = 'ACER' (string)
power_management.can_suspend_to_disk = true (bool)
power_management.can_suspend_to_ram = true (bool)
power_management.can_hibernate = true (bool)
power_management.can_suspend = true (bool)
system.formfactor = 'laptop' (string)
power_management.acpi.linux.version = '20050211' (string)
power_management.type = 'acpi' (string)
system.kernel.machine = 'i686' (string)
system.kernel.version = '2.6.11-kanotix-11' (string)
system.kernel.name = 'Linux' (string)
info.udi = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Computer' (string)
linux.sysfs_path_device = '(none)' (string)
info.bus = 'unknown' (string)
udi = '/org/freedesktop/Hal/devices/acpi_SLPB'
info.udi = '/org/freedesktop/Hal/devices/acpi_SLPB' (string)
linux.hotplug_type = 4 (0x4) (int)
button.has_state = false (bool)
info.capabilities = {'button'} (string list)
info.category = 'button' (string)
info.product = 'Sleep Button' (string)
button.type = 'sleep' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
linux.acpi_type = 11 (0xb) (int)
linux.acpi_path = '/proc/acpi/button/sleep/SLPB' (string)
udi = '/org/freedesktop/Hal/devices/acpi_PWRF'
info.udi = '/org/freedesktop/Hal/devices/acpi_PWRF' (string)
linux.hotplug_type = 4 (0x4) (int)
button.has_state = false (bool)
info.capabilities = {'button'} (string list)
info.category = 'button' (string)
info.product = 'Power Button' (string)
button.type = 'power' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
linux.acpi_type = 11 (0xb) (int)
linux.acpi_path = '/proc/acpi/button/power/PWRF' (string)
udi = '/org/freedesktop/Hal/devices/acpi_LID'
info.udi = '/org/freedesktop/Hal/devices/acpi_LID' (string)
linux.hotplug_type = 4 (0x4) (int)
button.has_state = true (bool)
button.state.value = false (bool)
info.capabilities = {'button'} (string list)
info.category = 'button' (string)
info.product = 'Lid Switch' (string)
button.type = 'lid' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
linux.acpi_type = 11 (0xb) (int)
linux.acpi_path = '/proc/acpi/button/lid/LID' (string)
udi = '/org/freedesktop/Hal/devices/acpi_ACAD'
info.udi = '/org/freedesktop/Hal/devices/acpi_ACAD' (string)
linux.hotplug_type = 4 (0x4) (int)
ac_adapter.present = true (bool)
info.capabilities = {'ac_adapter'} (string list)
info.category = 'ac_adapter' (string)
info.product = 'AC Adapter' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
linux.acpi_type = 3 (0x3) (int)
linux.acpi_path = '/proc/acpi/ac_adapter/ACAD' (string)
udi = '/org/freedesktop/Hal/devices/acpi_FAN0'
info.udi = '/org/freedesktop/Hal/devices/acpi_FAN0' (string)
linux.hotplug_type = 4 (0x4) (int)
fan.enabled = false (bool)
info.capabilities = {'fan'} (string list)
info.category = 'fan' (string)
info.product = 'Fan' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
linux.acpi_type = 2 (0x2) (int)
linux.acpi_path = '/proc/acpi/fan/FAN0' (string)
udi = '/org/freedesktop/Hal/devices/acpi_FAN1'
info.udi = '/org/freedesktop/Hal/devices/acpi_FAN1' (string)
linux.hotplug_type = 4 (0x4) (int)
fan.enabled = false (bool)
info.capabilities = {'fan'} (string list)
info.category = 'fan' (string)
info.product = 'Fan' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
linux.acpi_type = 2 (0x2) (int)
linux.acpi_path = '/proc/acpi/fan/FAN1' (string)
udi = '/org/freedesktop/Hal/devices/acpi_CPU0'
info.udi = '/org/freedesktop/Hal/devices/acpi_CPU0' (string)
linux.hotplug_type = 4 (0x4) (int)
processor.can_throttle = false (bool)
processor.number = 0 (0x0) (int)
info.capabilities = {'processor'} (string list)
info.category = 'processor' (string)
info.product = 'Intel(R) Pentium(R) M processor 1600MHz' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
linux.acpi_type = 1 (0x1) (int)
linux.acpi_path = '/proc/acpi/processor/CPU0' (string)
udi = '/org/freedesktop/Hal/devices/acpi_BAT1'
info.udi = '/org/freedesktop/Hal/devices/acpi_BAT1' (string)
linux.hotplug_type = 4 (0x4) (int)
battery.charge_level.percentage = 100 (0x64) (int)
battery.charge_level.rate = 0 (0x0) (int)
battery.charge_level.last_full = 14411 (0x384b) (int)
battery.charge_level.current = 14411 (0x384b) (int)
battery.voltage.current = 4736 (0x1280) (int)
battery.reporting.rate = 0 (0x0) (int)
battery.reporting.current = 3043 (0xbe3) (int)
battery.charge_level.capacity_state = 'ok' (string)
battery.rechargeable.is_discharging = false (bool)
battery.rechargeable.is_charging = false (bool)
battery.is_rechargeable = true (bool)
battery.charge_level.unit = 'mWh' (string)
battery.charge_level.granularity_2 = 370 (0x172) (int)
battery.charge_level.granularity_1 = 148 (0x94) (int)
battery.charge_level.low = 1480 (0x5c8) (int)
battery.charge_level.warning = 3700 (0xe74) (int)
battery.charge_level.design = 65120 (0xfe60) (int)
battery.voltage.design = 14800 (0x39d0) (int)
battery.voltage.unit = 'mV' (string)
battery.reporting.granularity_2 = 25 (0x19) (int)
battery.reporting.granularity_1 = 10 (0xa) (int)
battery.reporting.low = 100 (0x64) (int)
battery.reporting.warning = 250 (0xfa) (int)
battery.reporting.design = 4400 (0x1130) (int)
battery.reporting.last_full = 3043 (0xbe3) (int)
battery.reporting.unit = 'mAh' (string)
battery.technology = 'lithium-ion' (string)
battery.reporting.technology = 'LION' (string)
battery.model = '03ZG' (string)
battery.vendor = 'SANYO' (string)
battery.present = true (bool)
info.capabilities = {'battery'} (string list)
info.category = 'battery' (string)
battery.type = 'primary' (string)
info.product = 'Battery Bay' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
linux.acpi_type = 0 (0x0) (int)
linux.acpi_path = '/proc/acpi/battery/BAT1' (string)
udi = '/org/freedesktop/Hal/devices/acpi_BAT2'
info.udi = '/org/freedesktop/Hal/devices/acpi_BAT2' (string)
linux.hotplug_type = 4 (0x4) (int)
battery.present = false (bool)
info.capabilities = {'battery'} (string list)
info.category = 'battery' (string)
battery.type = 'primary' (string)
info.product = 'Battery Bay' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
linux.acpi_type = 0 (0x0) (int)
linux.acpi_path = '/proc/acpi/battery/BAT2' (string)
Dumped 10 device(s) from the Global Device List.
------------------------------------------------
Code: Alles auswählen
Module Size Used by
radeon 71424 1
drm 56468 2 radeon
binfmt_misc 8840 1
nfsd 199584 9
exportfs 4992 1 nfsd
lockd 56872 2 nfsd
sunrpc 123972 12 nfsd,lockd
ppdev 7300 0
lp 9672 0
realtime 4104 0
commoncap 5248 1 realtime
joydev 8000 0
8250_pnp 8192 0
parport_pc 35524 1
parport 30408 3 ppdev,lp,parport_pc
8250_pci 16640 0
slamr 373572 2
shpchp 89956 0
pci_hotplug 28592 1 shpchp
speedstep_centrino 7380 0
freq_table 3588 1 speedstep_centrino
autofs4 15748 1
cryptoloop 3072 0
aes_i586 39552 0
af_packet 16776 6
pcspkr 3428 0
i2c_i801 7564 0
8250 19900 2 8250_pnp,8250_pci
serial_core 18048 1 8250
ohci_hcd 18952 0
pcmcia 18568 4
yenta_socket 18696 3
rsrc_nonstatic 8576 1 yenta_socket
pcmcia_core 39860 3 pcmcia,yenta_socket,rsrc_nonstatic
video 14212 0
thermal 11016 0
processor 18740 2 speedstep_centrino,thermal
fan 3332 0
container 3328 0
button 5136 0
tsdev 5952 0
evdev 7168 0
battery 8324 0
ac 3588 0
ntfs 166032 0
usbhid 39616 0
ehci_hcd 29704 0
uhci_hcd 28304 0
usbcore 102136 5 ohci_hcd,usbhid,ehci_hcd,uhci_hcd
snd_intel8x0 27328 1
snd_ac97_codec 71288 1 snd_intel8x0
snd_pcm_oss 45856 0
snd_mixer_oss 15744 2 snd_pcm_oss
snd_pcm 77704 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer 20612 1 snd_pcm
snd 46340 6 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 7392 2 snd
snd_page_alloc 7428 2 snd_intel8x0,snd_pcm
ipw2100 137668 0
eth1394 17928 0
ieee80211 35876 1 ipw2100
ieee80211_crypt 4808 2 ipw2100,ieee80211
b44 19204 0
mii 3968 1 b44
ohci1394 29956 0
ieee1394 300088 2 eth1394,ohci1394
intel_agp 18716 1
agpgart 27304 2 drm,intel_agp