Broadcom 4318 mit Kernel 2.6.17

Henk84 · Beitrag von **Henk84** » 02.10.2006 22:57:57

Hallo!

Im Kernel 2.6.17 sind ja bereits die Dreiber enthalten, allerdings bekomme ich's dennoch nicht ins laufen. Habe meine Zugangsdaten um mich ins Netz einzuwählen wingegeben, aber er verbindet sich nicht, woran kann das liegen? Was kann ich versuchen?

chimaera · Beitrag von **chimaera** » 03.10.2006 12:03:33

hi henk,

mehr input! wie installierst/initialisierst du den treiber? nach welcher anleitung bist du vorgegangen (z.b. [1]) und wo genau geht's nicht weiter? bekommst du (fehler)meldungen? steht irgendetwas im log? fragen über fragen..

[1] http://bcm43xx.berlios.de/?go=documentation

Henk84 · Beitrag von **Henk84** » 03.10.2006 12:18:36

Okay, also, wie gesagt, habe den 2.6.17er Kernel, da ist der Treiber drin. Ich kann jetzt mit iwconfig und ifconfig gucken und die WLAN-Karte wird richtig erkannt. In etc/network/interfaces ist mein WLAN eingetragen mit key und so, ist ein WEP Netz. Jetzt muss ich doch in der Konsole doch einfach nur noch ifconfig eth1 up sagen um die Karte einzuschalten und er verbindet sich oder? Auf jeden Fall macht die Karte irgendwas, nur was weiß ich nicht und danach bin ich nach wie vor nit verbunden

koni · Beitrag von **koni** » 03.10.2006 12:23:52

Bei mir funktioniert ndiswrapper mit der Karte ganz gut!

Henk84 · Beitrag von **Henk84** » 03.10.2006 15:47:39

Ich will's ja aber ohne den NDISWRAPPER laufen haben

stefon · Beitrag von **stefon** » 05.10.2006 01:30:04

dann solltest du fehlermeldungen posten!

Henk84 · Beitrag von **Henk84** » 05.10.2006 10:53:24

Er gibt aber keine Fehlermeldungen zurück, er verbindet sich einfach nicht!

smo · Beitrag von **smo** » 05.10.2006 12:37:22

Auf jeden Fall macht die Karte irgendwas,

Was denn?

smo

chrigl · Beitrag von **chrigl** » 06.10.2006 20:37:37

Der Treiber läuft auf der Karte nur mit 11MBit/s.
Als ich ein bisschen damit rumprobiert habe funktionierte es nach einem runterschalten. Allerdings auch nicht zufriedenstellend. Es kamen andauernd Duplikate von Paketen rein. Und mit "andauernd" meine ich bei jedem Paket teilweise mehr als ein Dup

Habe mir aber nicht mehr die Mühe gemacht um nachzuvollziehen ob die Pakete tatsächlich durch die Luft schwirren oder der Treiber ne Macke hat.

Henk84 · Beitrag von **Henk84** » 10.10.2006 21:49:14

Was die Karte macht? Sie versucht sich mit dem Netz zu verbinden. Ich muss den wpa_supplicant benutzen, wegen FH. Folgende leider längere Ausgabe erfolgt:
schleppie3:/home/sascha# wpa_supplicant -wdd -ieth1 -Dwext -c /etc/wpa_supplicant.conf
Initializing interface 'eth1' conf '/etc/wpa_supplicant.conf' driver 'wext' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
Line: 1 - start of a new network block
ssid - hexdump_ascii(len=6):
46 48 47 49 46 42 FHGIFB
scan_ssid=1 (0x1)
proto: 0x1
key_mgmt: 0x1
eap methods - hexdump(len=16): 00 00 00 00 19 00 00 00 00 00 00 00 00 00 00 00
phase2 - hexdump_ascii(len=13):
61 75 74 68 3d 4d 53 43 48 41 50 56 32 auth=MSCHAPV2
identity - hexdump_ascii(len=6):
73 68 6e 72 31 37 shnr17
password - hexdump_ascii(len=8): [REMOVED]
priority=1 (0x1)
Line: 15 - start of a new network block
ssid - hexdump_ascii(len=4):
57 4c 41 4e WLAN
key_mgmt: 0x4
wep_key0 - hexdump(len=5): [REMOVED]
Priority group 1
id=0 ssid='FHGIFB'
Priority group 0
id=1 ssid='WLAN'
Initializing interface (2) 'eth1'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
SIOCGIWRANGE: WE(compiled)=20 WE(source)=18 enc_capa=0xf
capabilities: key_mgmt 0xf enc 0xf
WEXT: Operstate: linkmode=1, operstate=5
Own MAC address: 00:14:a4:69:b2:77
wpa_driver_wext_set_wpa
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_countermeasures
wpa_driver_wext_set_drop_unencrypted
Setting scan request: 0 sec 100000 usec
Added interface eth1
Wireless event: cmd=0x8b06 len=8
State: DISCONNECTED -> SCANNING
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=6):
46 48 47 49 46 42 FHGIFB
Trying to get current scan results first without requesting a new scan to speed up initial association
Received 383 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 1
0: 00:16:38:44:4d:1d ssid='WLAN' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - no WPA/RSN IE
1: 00:15:e9:0d:5a:1a ssid='Dodo_wlan' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - no WPA/RSN IE
Selecting BSS from priority group 0
0: 00:16:38:44:4d:1d ssid='WLAN' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - no WPA/RSN IE
1: 00:15:e9:0d:5a:1a ssid='Dodo_wlan' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - no WPA/RSN IE
selected non-WPA AP 00:16:38:44:4d:1d ssid='WLAN'
Trying to associate with 00:16:38:44:4d:1d (SSID='WLAN' freq=0 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: clearing AP WPA IE
WPA: clearing AP RSN IE
WPA: clearing own WPA/RSN IE
No keys have been configured - skip key clearing
wpa_driver_wext_set_key: alg=1 key_idx=0 set_tx=1 seq_len=0 key_len=5
wpa_driver_wext_set_drop_unencrypted
State: SCANNING -> ASSOCIATING
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_wext_associate
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - portControl=ForceAuthorized
Wireless event: cmd=0x8b06 len=8
Wireless event: cmd=0x8b1a len=13
Wireless event: cmd=0x8b19 len=8
Received 379 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 1
0: 00:16:38:44:4d:1d ssid='WLAN' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - no WPA/RSN IE
1: 00:15:e9:0d:5a:1a ssid='Dodo_wlan' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - no WPA/RSN IE
Selecting BSS from priority group 0
0: 00:16:38:44:4d:1d ssid='WLAN' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - no WPA/RSN IE
1: 00:15:e9:0d:5a:1a ssid='Dodo_wlan' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - no WPA/RSN IE
selected non-WPA AP 00:16:38:44:4d:1d ssid='WLAN'
Already associated with the selected AP.
Authentication with 00:00:00:00:00:00 timed out.
Added BSSID 00:16:38:44:4d:1d into blacklist
State: ASSOCIATING -> DISCONNECTED
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Wireless event: cmd=0x8b19 len=8
Received 378 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 1
0: 00:15:e9:0d:5a:1a ssid='Dodo_wlan' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - no WPA/RSN IE
1: 00:16:38:44:4d:1d ssid='WLAN' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - no WPA/RSN IE
Selecting BSS from priority group 0
0: 00:15:e9:0d:5a:1a ssid='Dodo_wlan' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - no WPA/RSN IE
1: 00:16:38:44:4d:1d ssid='WLAN' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - no WPA/RSN IE
selected non-WPA AP 00:16:38:44:4d:1d ssid='WLAN'
Trying to associate with 00:16:38:44:4d:1d (SSID='WLAN' freq=0 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: clearing AP WPA IE
WPA: clearing AP RSN IE
WPA: clearing own WPA/RSN IE
No keys have been configured - skip key clearing
wpa_driver_wext_set_key: alg=1 key_idx=0 set_tx=1 seq_len=0 key_len=5
wpa_driver_wext_set_drop_unencrypted
State: SCANNING -> ASSOCIATING
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_wext_associate
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - portControl=ForceAuthorized
Wireless event: cmd=0x8b06 len=8
Wireless event: cmd=0x8b1a len=13
Authentication with 00:00:00:00:00:00 timed out.
BSSID 00:16:38:44:4d:1d blacklist count incremented to 2
State: ASSOCIATING -> DISCONNECTED
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=6):
46 48 47 49 46 42 FHGIFB
Wireless event: cmd=0x8b19 len=8
Received 379 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 1
0: 00:15:e9:0d:5a:1a ssid='Dodo_wlan' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - no WPA/RSN IE
1: 00:16:38:44:4d:1d ssid='WLAN' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - blacklisted
Selecting BSS from priority group 0
0: 00:15:e9:0d:5a:1a ssid='Dodo_wlan' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - no WPA/RSN IE
1: 00:16:38:44:4d:1d ssid='WLAN' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - blacklisted
No APs found - clear blacklist and try again
Removed BSSID 00:16:38:44:4d:1d from blacklist (clear)
Selecting BSS from priority group 1
0: 00:15:e9:0d:5a:1a ssid='Dodo_wlan' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - no WPA/RSN IE
1: 00:16:38:44:4d:1d ssid='WLAN' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - no WPA/RSN IE
Selecting BSS from priority group 0
0: 00:15:e9:0d:5a:1a ssid='Dodo_wlan' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - no WPA/RSN IE
1: 00:16:38:44:4d:1d ssid='WLAN' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - no WPA/RSN IE
selected non-WPA AP 00:16:38:44:4d:1d ssid='WLAN'
Trying to associate with 00:16:38:44:4d:1d (SSID='WLAN' freq=0 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: clearing AP WPA IE
WPA: clearing AP RSN IE
WPA: clearing own WPA/RSN IE
No keys have been configured - skip key clearing
wpa_driver_wext_set_key: alg=1 key_idx=0 set_tx=1 seq_len=0 key_len=5
wpa_driver_wext_set_drop_unencrypted
State: SCANNING -> ASSOCIATING
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_wext_associate
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - portControl=ForceAuthorized
Wireless event: cmd=0x8b06 len=8
Wireless event: cmd=0x8b1a len=13
Authentication with 00:00:00:00:00:00 timed out.
Added BSSID 00:16:38:44:4d:1d into blacklist
State: ASSOCIATING -> DISCONNECTED
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Wireless event: cmd=0x8b19 len=8
Received 578 bytes of scan results (3 BSSes)
Scan results: 3
Selecting BSS from priority group 1
0: 00:15:e9:0d:5a:1a ssid='Dodo_wlan' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - no WPA/RSN IE
1: 00:16:38:44:4d:1d ssid='WLAN' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - no WPA/RSN IE
2: 00:0f:b5:b2:62:1a ssid='Arcor Internet' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - no WPA/RSN IE
Selecting BSS from priority group 0
0: 00:15:e9:0d:5a:1a ssid='Dodo_wlan' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - no WPA/RSN IE
1: 00:16:38:44:4d:1d ssid='WLAN' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - no WPA/RSN IE
2: 00:0f:b5:b2:62:1a ssid='Arcor Internet' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - no WPA/RSN IE
selected non-WPA AP 00:16:38:44:4d:1d ssid='WLAN'
Trying to associate with 00:16:38:44:4d:1d (SSID='WLAN' freq=0 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: clearing AP WPA IE
WPA: clearing AP RSN IE
WPA: clearing own WPA/RSN IE
No keys have been configured - skip key clearing
wpa_driver_wext_set_key: alg=1 key_idx=0 set_tx=1 seq_len=0 key_len=5
wpa_driver_wext_set_drop_unencrypted
State: SCANNING -> ASSOCIATING
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_wext_associate
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - portControl=ForceAuthorized
Wireless event: cmd=0x8b06 len=8
Wireless event: cmd=0x8b1a len=13
CTRL-EVENT-TERMINATING - signal 2 received
Removing interface eth1
State: ASSOCIATING -> DISCONNECTED
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_wext_set_wpa
wpa_driver_wext_set_drop_unencrypted
wpa_driver_wext_set_countermeasures
No keys have been configured - skip key clearing
WEXT: Operstate: linkmode=0, operstate=6
Removed BSSID 00:16:38:44:4d:1d from blacklist (clear)

Ich erkenne gerade keinen wirklichen Fehler, ihr?