paket kommuniziert nicht mit testing?

Warum Debian und/oder eine seiner Spielarten? Was muss ich vorher wissen? Wo geht es nach der Installation weiter?
Antworten
seeadler
Beiträge: 289
Registriert: 19.10.2005 13:36:47

paket kommuniziert nicht mit testing?

Beitrag von seeadler » 13.06.2006 17:58:28

ist das möglich das die paketquelle nicht mit testing kommuniziert?

W: GPG error: http://debian.tu-bs.de stable-backports Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY FB1A399A71409CDF
E: Konnte Lock /var/lib/dpkg/lock nicht bekommen - open (11 Die Ressource ist zur Zeit nicht verfügbar)
E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it?

Zwerg
Beiträge: 397
Registriert: 26.12.2005 00:10:09
Wohnort: Magrathea
Kontaktdaten:

Beitrag von Zwerg » 13.06.2006 18:03:20

Hast du apt evt. noch in einer anderen Konsole am laufen?

mullers

Beitrag von mullers » 13.06.2006 18:04:14

Also wie das ausschaut, sind das zwei Sachen.
Einmal hast Du Dir den öffentlichen gpg Schlüssel nicht geholt, daher die Meldung no_pub key undsoweiter.
Das andere, das läuft eben noch ein Prozess, zum Beispiel ein nicht beendetes aptitude.
Das müsstest Du Dir mal mit

Code: Alles auswählen

ps -A
anschauen, und den Prozess gegebenenfalls killen.

henry

seeadler
Beiträge: 289
Registriert: 19.10.2005 13:36:47

Beitrag von seeadler » 13.06.2006 18:19:37

wie hole ich mir den schlüssel, blöde frage von mir
kann doch nicht mehr eingeben als apt-get install nxfree

wenn ich in die konsole nxsetup --install zur konfiguration, dann wird folgendes ausgegeben:
Testing your nxserver connection ...
The authenticity of host '127.0.0.1 (127.0.0.1)' can't be established.
RSA key fingerprint is 13:83:20:d6:5f:1d:ca:04:11:66:fa:81:ac:d7:93:15.
Are you sure you want to continue connecting (yes/no)? Fatal error: Could not co nnect to NX Server.

Please check your ssh setup:

- Make sure "nx" is one of the AllowUsers in sshd_config.
- Make sure your sshd allows public key authentication.
- Make sure your sshd is really running on port 22.
- Make sure your sshd_config AuthorizedKeysFile in sshd_config is set to authorized_keys2.

Antworten