Beim booten werden keine Meldungen angezeigt-> vesafb pro

[Sticky_Key]

Hallo!
Bin neu in der LinuxWelt und hab mein System soweit eingerichtet.
Zuerst habe ich mir nen neun Kernel gebacken (vanilla 2.6.15.6), das hat soweit auch funktioniert.
Mal einen Ausschnitt aus meiner .config

Code: Alles auswählen

# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
CONFIG_FB_CIRRUS=m
CONFIG_FB_PM2=m
CONFIG_FB_PM2_FIFO_DISCONNECT=y
CONFIG_FB_CYBER2000=m
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=y
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
CONFIG_FB_HGA=m
# CONFIG_FB_HGA_ACCEL is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
CONFIG_FB_RIVA=m
# CONFIG_FB_RIVA_I2C is not set
# CONFIG_FB_RIVA_DEBUG is not set
CONFIG_FB_I810=m
# CONFIG_FB_I810_GTF is not set
# CONFIG_FB_INTEL is not set
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
# CONFIG_FB_MATROX_G is not set
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_MULTIHEAD=y
CONFIG_FB_RADEON_OLD=m
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_DEBUG=y
CONFIG_FB_ATY128=m
CONFIG_FB_ATY=m
# CONFIG_FB_ATY_CT is not set
# CONFIG_FB_ATY_GX is not set
# CONFIG_FB_SAVAGE is not set
CONFIG_FB_SIS=m
# CONFIG_FB_SIS_300 is not set
# CONFIG_FB_SIS_315 is not set
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=m
# CONFIG_FB_3DFX_ACCEL is not set
CONFIG_FB_VOODOO1=m
# CONFIG_FB_CYBLA is not set
CONFIG_FB_TRIDENT=m
# CONFIG_FB_TRIDENT_ACCEL is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_GEODE is not set
CONFIG_FB_VIRTUAL=m

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_MDA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set

#
# Logo configuration
#
# CONFIG_LOGO is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Bootsplash configuration
#
CONFIG_BOOTSPLASH=y

Nachdem der bootloader (grub) das System startet, bekomme ich leider keine Ausgabe mehr, bzw. wenige Zeilen, danach steht der Text und ich seh nicht, was das System alles startet.

Hier ein Ausschnitt aus dmesg

Code: Alles auswählen

Starting monitor auto detection...
radeonfb: I2C (port 1) ... not found
radeonfb: I2C (port 2) ... found TMDS panel
radeonfb: I2C (port 3) ... not found
radeonfb: I2C (port 4) ... not found
radeonfb: I2C (port 2) ... found TMDS panel
radeonfb: I2C (port 3) ... not found
radeonfb: I2C (port 4) ... not found
radeonfb: Monitor 1 type DFP found
radeonfb: EDID probed
radeonfb: Monitor 2 type no found
Parsing EDID data for panel info
Setting up default mode based on panel info
hStart = 1328, hEnd = 1440, hTotal = 1688
vStart = 1025, vEnd = 1028, vTotal = 1066
h_total_disp = 0x9f00d2    hsync_strt_wid = 0xe052a
v_total_disp = 0x3ff0429           vsync_strt_wid = 0x30400
pixclock = 9259
freq = 10800
freq = 10800, PLL min = 20000, PLL max = 40000
ref_div = 12, ref_clk = 2700, output_freq = 21600
ref_div = 12, ref_clk = 2700, output_freq = 21600
post div = 0x1
fb_div = 0x60
ppll_div_3 = 0x10060
Console: switching to colour frame buffer device 160x64
radeonfb (0000:01:00.0): ATI Radeon NH
radeonfb_pci_register END
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
fb1: VGA16 VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
mdacon: MDA with 8K of memory detected.
Console: switching consoles 1-16 to mono MDA-2 80x25

Ab ca. der Asugabe bekomme ich keine Ausgabe mehr auf dem Monitor angezeit .

Code: Alles auswählen

dmesg | grep vesafb

gibt mir leider nichts aus ...

Wisst ihr Rat?

[/b]

[Spasswolf]

Benutzt du eine Initramdisk?

[javar]

Hatte mal bootsplash installiert, hat aber sowieso nciht funktioniert. Daher liegt wohl noch nen file in /boot , hat aber keine Funktion...

[KBDCALLS]

Hat das einen Grund warum du keinen Original Debiankernel nimmst ?

[javar]

Mhmm, ne eiegtlich nicht. Bin halt noch recht neu in der Debian/Linux-Welt und wollte mal ausprobieren, wie man das alles von Hand macht. Aber auf meinem Laptop, auf dem ich die gleiche Installation ausgeführt habe, funktioniert das alles einwandfrei. Irgednwie komisch....