ERROR: Expecting only one toc-file. bei cdrdao

Du kommst mit der Installation nicht voran oder willst noch was nachfragen? Schau auch in den "Tipps und Tricks"-Bereich.
Antworten
Benutzeravatar
zyon
Beiträge: 106
Registriert: 06.12.2005 08:09:46
Kontaktdaten:

ERROR: Expecting only one toc-file. bei cdrdao

Beitrag von zyon » 01.01.2006 20:12:36

Hallo, ich bekomme immer Folgende Meldung bei cdrdao wenn ich ein bin cue image brennen will. Aber die cue und bin daein sind zu 100% OK

Code: Alles auswählen

fuckup:/# cdrdao write --device s/ATAPI/ATA/ --speed 4 home/zyon/hda1/movies/td1.cue 
ERROR: Expecting only one toc-file.

Cdrdao version 1.2.1 - (C) Andreas Mueller <andreas@daneb.de>
  SCSI interface library - (C) Joerg Schilling
  Paranoia DAE library - (C) Monty

Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables.


Usage: cdrdao write [options] toc-file
options:
  --device [proto:]{<x,y,z>|device} - sets SCSI device of CD-writer
                            (default: s/ATAPI/ATA/)
  --driver <id>           - force usage of specified driver
  --simulate              - just perform a write simulation
  --speed <writing-speed> - selects writing speed
  --multi                 - session will not be closed
  --buffer-under-run-protection #
                          - 0: disable buffer under run protection
                            1: enable buffer under run protection (default)
  --write-speed-control # - 0: disable writing speed control by the drive
                            1: enable writing speed control (default)
  --overburn              - allow to overburn a medium
  --full-burn             - force burning to the outer disk edge
                            with '--driver generic-mmc-raw'
  --capacity <minutes>    - sets disk capacity for '--full-burn'
                            you must specify this when using blanks bigger
                            than 80 min. (90,99,etc.)
                            because they seems like 80 min. blanks
  --eject                 - ejects cd after writing or simulation
  --swap                  - swap byte order of audio files
  --buffers #             - sets fifo buffer size (min. 10)
  --reload                - reload the disk if necessary for writing
  --force                 - force execution of operation
  --tmpdir <path>         - sets directory for temporary wav files
  --keep                  - keep generated temp wav files after exit
  -v #                    - sets verbose level
  -n                      - no pause before writing

Code: Alles auswählen

fuckup:/# cdrecord dev=ATAPI -scanbus
Cdrecord-Clone 2.01.01a03 (i686-pc-linux-gnu) Copyright (C) 1995-2005 Joerg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
      and thus may have bugs that are not present in the original version.
      Please send bug reports and support requests to <cdrtools@packages.debian.org>.
      The original author should not be bothered with problems of this version.

cdrecord: Warning: Running on Linux-2.6.8-2-686
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
cdrecord: Warning: Linux-2.6.8 introduced incompatible interface changes.
cdrecord: Warning: SCSI transport does no longer work for suid root programs.
cdrecord: Warning: if cdrecord fails, try to run it from a root account.
scsidev: 'ATAPI'
devname: 'ATAPI'
scsibus: -2 target: -2 lun: -2
Warning: Using ATA Packet interface.
Warning: The related Linux kernel interface code seems to be unmaintained.
Warning: There is absolutely NO DMA, operations thus are slow.
Using libscg version 'ubuntu-0.8ubuntu1'.
cdrecord: Warning: using inofficial version of libscg (ubuntu-0.8ubuntu1 '@(#)scsitransp.c      1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling').
scsibus0:
        0,0,0     0) *
        0,1,0     1) 'PIONEER ' 'DVD-RW  DVR-105 ' '1.30' Removable CD-ROM
        0,2,0     2) *
        0,3,0     3) *
        0,4,0     4) *
        0,5,0     5) *
        0,6,0     6) *
        0,7,0     7) *
jemand eine Idee ?

Benutzeravatar
mistersixt
Beiträge: 6601
Registriert: 24.09.2003 14:33:25
Lizenz eigener Beiträge: GNU Free Documentation License

Beitrag von mistersixt » 02.01.2006 07:55:04

Probier mal die Option "--device ATAPI:0,1,0".

Gruss, mistersixt.
--
System: Debian Bookworm, 6.11.x.-x-amd64, ext4, AMD Ryzen 7 3700X, 8 x 3.8 Ghz., Radeon RX 5700 XT, 32 GB Ram, XFCE

Benutzeravatar
zyon
Beiträge: 106
Registriert: 06.12.2005 08:09:46
Kontaktdaten:

Beitrag von zyon » 02.01.2006 12:56:37

mistersixt hat geschrieben:Probier mal die Option "--device ATAPI:0,1,0".

Gruss, mistersixt.
will leider immer nich nicht!

Habe Kernel 2.6 wenn es etwas hilft!?

Gruß

Zy0n

Benutzeravatar
mistersixt
Beiträge: 6601
Registriert: 24.09.2003 14:33:25
Lizenz eigener Beiträge: GNU Free Documentation License

Beitrag von mistersixt » 03.01.2006 09:26:13

Was komisch ist:

Code: Alles auswählen

...
ERROR: Expecting only one toc-file
...
Und Du bist Dir sicher, dass das cue/bin korrekt ist?

Gruss, mistersixt.
--
System: Debian Bookworm, 6.11.x.-x-amd64, ext4, AMD Ryzen 7 3700X, 8 x 3.8 Ghz., Radeon RX 5700 XT, 32 GB Ram, XFCE

Benutzeravatar
guven
Beiträge: 287
Registriert: 22.08.2004 13:53:52
Lizenz eigener Beiträge: GNU Free Documentation License
Wohnort: hamburg/st.pauli
Kontaktdaten:

Re: ERROR: Expecting only one toc-file. bei cdrdao

Beitrag von guven » 03.01.2006 14:53:08

hi Zy0n

ich wuerde mal in der /etc/fstab nach dem mountpunkt des DVD-Brenners schauen und ihn als device fuer cdrdao benutzen. dass duerfte wohl /dev/hdd sein. danach wuerde ich cdrdao direkt in dem verzeichnis ausfuehren in dem auch die .cue liegt bei dir also movies. die .cue muss sich in dem verzeichnis befinden in dem auch die .bin ist (und eventuell auch die .rar wenn der film vorher damit gepackt war). ich vermute dass der ERROR genau das meint, dass er keine pfadangabe sondern genau die zu brennende .cue erwartet.

in kuerze:

Code: Alles auswählen

fuckup:/# cd home/zyon/hda1/movies
und danach:

Code: Alles auswählen

fuckup:/home/zyon/hda1/movies# cdrecord write --devicd /dev/hdd td1.cue
die speed angabe ist optional

:D
Auf Wunsch entfernt!

Antworten