möchte Sarge als ntp server für Windows Clients konfigurieren.
habe folgendes gemacht:
# apt-get install ntp
# apt-get install ntp-simple ntpdate
anschliessend habe zum /etc/ntp.conf ein paar time server hingefügt:
Code: Alles auswählen
# /etc/ntp.conf, configuration for ntpd
# ntpd will use syslog() if logfile is not defined
#logfile /var/log/ntpd
driftfile /var/lib/ntp/ntp.drift
statsdir /var/log/ntpstats/
statistics loopstats peerstats clockstats
filegen loopstats file loopstats type day enable
filegen peerstats file peerstats type day enable
filegen clockstats file clockstats type day enable
# You do need to talk to an NTP server or two (or three).
#server ntp.your-provider.example
# pool.ntp.org maps to more than 100 low-stratum NTP servers.
# Your server will pick a different set every time it starts up.
# *** Please consider joining the pool! ***
# *** <http://www.pool.ntp.org/#join> ***
server pool.ntp.org
#server pool.ntp.org
## uncomment for extra reliability
# ... and use the local system clock as a reference if all else fails
# NOTE: in a local network, set the local stratum of *one* stable server
# to 10; otherwise your clocks will drift apart if you lose connectivity.
server 127.127.1.0
fudge 127.127.1.0 stratum 13
# By default, exchange time with everybody, but don't allow configuration.
# See /usr/share/doc/ntp-doc/html/accopt.html for details.
restrict default kod notrap nomodify nopeer noquery
# Local users may interrogate the ntp server more closely.
restrict 127.0.0.1 nomodify
# Clients from this (example!) subnet have unlimited access,
# but only if cryptographically authenticated
#restrict 192.168.123.0 mask 255.255.255.0 notrust
# If you want to provide time to your local subnet, change the next line.
# (Again, the address is an example only.)
#broadcast 192.168.123.255
# If you want to listen to time broadcasts on your local subnet,
# de-comment the next lines. Please do this only if you trust everybody
# on the network!
#disable auth
#broadcastclient
server ntps1-0.uni-erlangen.de iburst
server clock.llnl.gov iburst
server ntps1-1.uni-erlangen.de iburst
server ntps1-2.uni-erlangen.de iburst
server 131.188.3.220, stratum 1, offset -7.726476, delay 0.05037
10 Jun 22:49:50 ntpdate[2400]: step time server 131.188.3.220 offset -7.726476 sec
# /etc/init.d/ntpdate restart
# /etc/init.d/ntp-server stop
Stopping NTP server: ntpd.
# /etc/init.d/ntp-server start
Starting NTP server: ntpd.
aber der server lauscht nicht automatisch auf dem port UDP 37