Problem bei der Wiedereinwahl

[dynamix]

Hi Leute,

ich hab bei mir aufm Linux Server pppoe eingerichtet und es funktionierte auch wunderbar.

Seit geraumer Zeit jedoch funktioniert die Wiedereinwahl, welche ich via Cronjob ( poff dsl-provider um 4 Uhr und pon dsl-provider und 5 Uhr ) gelöst habe nicht mehr.

Der /var/log/messages kann ich folgendes entnehmen:

Code: Alles auswählen

May 10 04:00:01 gw00 pppd[3112]: Terminating on signal 15
May 10 04:00:01 gw00 pppd[3112]: Connect time 885.4 minutes.
May 10 04:00:01 gw00 pppd[3112]: Sent 15582558 bytes, received 62061315 bytes.
May 10 04:00:01 gw00 pppd[3112]: Terminating on signal 15
May 10 04:00:01 gw00 pppd[3112]: Connection terminated.
May 10 04:00:01 gw00 pppd[3112]: Exit.
May 10 05:00:01 gw00 pppd[15889]: pppd 2.4.3 started by root, uid 0
May 10 05:00:01 gw00 pppd[15892]: pppd 2.4.3 started by root, uid 0
May 10 05:00:01 gw00 pppd[15892]: Serial connection established.
May 10 05:00:01 gw00 pppd[15892]: Using interface ppp0
May 10 05:00:01 gw00 pppd[15892]: Connect: ppp0 <--> /dev/pts/4
May 10 05:00:01 gw00 pppd[15889]: Serial connection established.
May 10 05:00:01 gw00 pppd[15889]: Using interface ppp1
May 10 05:00:01 gw00 pppd[15889]: Connect: ppp1 <--> /dev/pts/3
May 10 05:00:01 gw00 pppd[15892]: Modem hangup
May 10 05:00:01 gw00 pppd[15892]: Connection terminated.
May 10 05:00:01 gw00 pppd[15889]: Modem hangup
May 10 05:00:01 gw00 pppd[15889]: Connection terminated.
May 10 05:05:01 gw00 pppd[15889]: Serial connection established.
May 10 05:05:01 gw00 pppd[15892]: Serial connection established.
May 10 05:10:01 gw00 pppd[15889]: Serial connection established.
May 10 05:10:01 gw00 pppd[15892]: Serial connection established.
May 10 05:15:01 gw00 pppd[15889]: Serial connection established.
May 10 05:15:01 gw00 pppd[15892]: Serial connection established.
May 10 05:20:01 gw00 pppd[15889]: Serial connection established.
May 10 05:20:01 gw00 pppd[15892]: Serial connection established.
May 10 05:25:01 gw00 pppd[15889]: Serial connection established.
May 10 05:25:01 gw00 pppd[15892]: Serial connection established.
May 10 05:30:01 gw00 pppd[15889]: Serial connection established.
May 10 05:30:01 gw00 pppd[15892]: Serial connection established.
May 10 05:35:01 gw00 pppd[15889]: Serial connection established.
May 10 05:35:01 gw00 pppd[15892]: Serial connection established.
May 10 05:40:01 gw00 pppd[15889]: Serial connection established.
May 10 05:40:01 gw00 pppd[15892]: Serial connection established.
May 10 05:45:02 gw00 pppd[15889]: Serial connection established.
May 10 05:45:02 gw00 pppd[15889]: Exit.
May 10 05:45:02 gw00 pppd[15892]: Serial connection established.
May 10 05:45:02 gw00 pppd[15892]: Exit.

Kann mir hier von euch jemand helfen? Steh echt komplett aufm schlauch was ich tun soll.
Habe auch schon danach gegoogelt aber leider nichts brauchbares gefunden.

Auf baldige Antwort und besten Dank im voraus



Marco 'dynamix' Reinhart

[mistersixt]

May 10 05:00:01 gw00 pppd[15889]: pppd 2.4.3 started by root, uid 0
May 10 05:00:01 gw00 pppd[15892]: pppd 2.4.3 started by root, uid 0
...

Da werden morgens um 5 irgendwie 2 pppd gestartet, überprüfe doch nochmal Deine crontab, oder mach mal um 4 ein "/etc/init.d/ppp stop" und um 5 "/etc/init.d/ppp start".

Gruss, mistersixt.

PS: Du hast Doppel-Posting, die gleiche Frage nochmal in Internetrouter und Proxies, bitte nur 1 x posten, danke.

[dynamix]

Hi,

nun sieht das Problem schon ganz anders aus:

Code: Alles auswählen

May 11 04:00:01 gw00 pppd[18261]: Terminating on signal 15
May 11 04:00:01 gw00 pppd[18261]: Connect time 1223.7 minutes.
May 11 04:00:01 gw00 pppd[18261]: Sent 30622426 bytes, received 69299220 bytes.
May 11 04:00:01 gw00 pppd[18261]: Terminating on signal 15
May 11 04:00:01 gw00 pppd[18261]: Terminating on signal 15
May 11 04:00:01 gw00 pppd[18261]: Connection terminated.
May 11 04:00:01 gw00 pppd[18261]: Terminating on signal 15
May 11 04:00:01 gw00 pppd[18261]: Exit.
May 11 04:25:52 gw00 -- MARK --
May 11 04:45:52 gw00 -- MARK --
May 11 05:00:01 gw00 pppd[29377]: pppd 2.4.3 started by root, uid 0
May 11 05:00:01 gw00 pppd[29377]: Serial connection established.
May 11 05:00:01 gw00 pppd[29377]: Using interface ppp0
May 11 05:00:01 gw00 pppd[29377]: Connect: ppp0 <--> /dev/pts/3
May 11 05:00:01 gw00 pppd[29384]: pppd 2.4.3 started by root, uid 0
May 11 05:00:01 gw00 pppd[29377]: Modem hangup
May 11 05:00:01 gw00 pppd[29377]: Connection terminated.
May 11 05:00:01 gw00 pppd[29384]: Serial connection established.
May 11 05:00:06 gw00 pppd[29394]: pppd 2.4.3 started by root, uid 0
May 11 05:00:06 gw00 pppd[29394]: Serial connection established.
May 11 05:00:06 gw00 pppd[29394]: Using interface ppp0
May 11 05:00:06 gw00 pppd[29394]: Connect: ppp0 <--> /dev/pts/4
May 11 05:00:07 gw00 pppd[29401]: pppd 2.4.3 started by root, uid 0
May 11 05:00:07 gw00 pppd[29401]: Serial connection established.
May 11 05:00:07 gw00 pppd[29401]: Using interface ppp1
May 11 05:00:07 gw00 pppd[29401]: Connect: ppp1 <--> /dev/pts/5
May 11 05:02:08 gw00 pppd[29394]: LCP terminated by peer
May 11 05:02:08 gw00 pppd[29394]: Modem hangup
May 11 05:02:08 gw00 pppd[29394]: Connection terminated.
May 11 05:02:08 gw00 pppd[29401]: Modem hangup
May 11 05:02:08 gw00 pppd[29401]: Connection terminated.
May 11 05:05:01 gw00 pppd[29377]: Serial connection established.
May 11 05:05:02 gw00 pppd[29384]: Serial connection established.

so zieht sich das ca. ne ganze Stunde lang hin.

Any Idea?

[michaa7]

Hi,

auch ich habe / hatte (?) probleme mit der wiedereinwahl. Diese fielen wohl zeitlich mit dem installieren eines neuen ppp packetes vor 2-3 wochen zusammen. Seit vorgestern gibt es eine weitere aktualisierung von ppp. Bis jetzt läuft es durch...vielleicht hilft das

Code: Alles auswählen

apt-get update
apt-get dist-upgrade