ISDNverbingung zu AOL, aber kein datentransfer

[f-bert]

hi,

ich habe eine Verbindung zu AOL mit meiner FritzCard v2.0 hergestellt, jedoch werden keine Daten übertragen?
Mit Freenet funktioniert es allerdings.

hier sind mein /etc/ppp/peers/isdn/aol Einstellungen:

Code: Alles auswählen

debug
sync
noauth
usepeerdns
nodetach
noproxyarp
hide-password
replacedefaultroute
user benuter@de.aol.com
plugin userpass.so
password geheim ;)
defaultroute
plugin capiplugin.so
#controller 1
#numberprefix 0
number 01914
protocol hdlc
/dev/null

folgender output scheint ja doch irgendwie richtig zu sein:

Code: Alles auswählen

f-bert:/etc/ppp/peers/isdn# pon isdn/aol
Plugin userpass.so loaded.
userpass: $Revision: 1.5 $
Plugin capiplugin.so loaded.
capiplugin: $Revision: 1.36 $
capiconn:  1.10
capiplugin: phase serialconn.
capiplugin: contr=1
capiplugin: contr=1
capiplugin: contr=1
capiplugin: contr=1
controller 1: listen_change_state 0 -> 1
controller 1: listen_change_state state=1 event=1 ????
controller 1: listen_change_state state=1 event=1 ????
controller 1: listen_change_state state=1 event=1 ????
contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144 cipmask=0x0 capimask2=0x0
controller 1: listen_change_state 1 -> 0
plci_change_state:0x0 0 -> 1 event=1
capiplugin: dialing 01914 (hdlc)
contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144 cipmask=0x0 capimask2=0x0
controller 1: listen_change_state state=0 event=3 ????
contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144 cipmask=0x0 capimask2=0x0
controller 1: listen_change_state state=0 event=3 ????
contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144 cipmask=0x0 capimask2=0x0
controller 1: listen_change_state state=0 event=3 ????
plci_change_state:0x101 1 -> 2 event=3
plci_change_state:0x101 2 -> 3 event=6
ncci_change_state:0x101 0 -> 1 event=1
ncci_change_state:0x10101 1 -> 3 event=3
ncci_change_state:0x10101 3 -> 4 event=7
ncci 0x10101 up
capiplugin: connected: "" -> "01914" outgoing (pcli=0x101/ncci=0x10101)
capiplugin: using /dev/capi/0: "" -> "01914" outgoing (pcli=0x101/ncci=0x10101)
using channel 51
Using interface ppp0
Connect: ppp0 <--> /dev/capi/0
capiplugin: phase establish (was serialconn).
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x3a63f138> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x1 <mru 1514> <auth pap> <magic 0xe5594f19> <mrru 1514> <endpoint [null]>]
sent [LCP ConfRej id=0x1 <mrru 1514>]
rcvd [LCP ConfRej id=0x1 <pcomp>]
sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x3a63f138> <accomp>]
rcvd [LCP ConfReq id=0x2 <mru 1514> <auth pap> <magic 0xe5594f19>]
sent [LCP ConfAck id=0x2 <mru 1514> <auth pap> <magic 0xe5594f19>]
rcvd [LCP ConfRej id=0x2 <accomp>]
sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0x3a63f138>]
rcvd [LCP ConfAck id=0x3 <asyncmap 0x0> <magic 0x3a63f138>]
sent [LCP EchoReq id=0x0 magic=0x3a63f138]
capiplugin: phase authenticate (was establish).
sent [PAP AuthReq id=0x1 user="benutzer@de.aol.com" password=<hidden>]
rcvd [LCP EchoRep id=0x0 magic=0xe5594f19]
rcvd [LCP ConfReq id=0x1 <mru 1400> <auth chap MD5> <magic 0x98b3c>]
capiplugin: phase establish (was authenticate).
sent [LCP ConfReq id=0x4 <asyncmap 0x0> <magic 0xdedc2100> <pcomp> <accomp>]
sent [LCP ConfAck id=0x1 <mru 1400> <auth chap MD5> <magic 0x98b3c>]
rcvd [LCP ConfNak id=0x4 <pcomp> <asyncmap 0x0>]
Received bad configure-nak:  07 02 02 06 00 00 00 00
rcvd [LCP ConfReq id=0x1 <mru 1400> <auth chap MD5> <magic 0x98b3c>]
sent [LCP ConfAck id=0x1 <mru 1400> <auth chap MD5> <magic 0x98b3c>]
sent [LCP ConfReq id=0x4 <asyncmap 0x0> <magic 0xdedc2100> <pcomp> <accomp>]
rcvd [LCP ConfAck id=0x4 <asyncmap 0x0> <magic 0xdedc2100> <pcomp> <accomp>]
sent [LCP EchoReq id=0x0 magic=0xdedc2100]
capiplugin: phase authenticate (was establish).
rcvd [CHAP Challenge id=0x2 <76fb858af59683d8acb20c4da079c3e9be05bab97fe35c6b3e0ea7db7260bb82>, name = "ipt-frrtd16"]
sent [CHAP Response id=0x2 <3cdb42042863cdd81edfe8e6ae070a41>, name = "fbert678@de.aol.com"]
rcvd [LCP EchoRep id=0x0 magic=0x98b3c]
rcvd [CHAP Success id=0x2 ""]
CHAP authentication succeeded
capiplugin: phase network (was authenticate).
sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 192.168.0.1> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
rcvd [IPCP ConfReq id=0x3 <addr 62.53.221.197>]
sent [IPCP ConfAck id=0x3 <addr 62.53.221.197>]
rcvd [LCP ProtRej id=0x4 80 fd 01 01 00 0f 1a 04 78 00 18 04 78 00 15 03 2f]
Protocol-Reject for 'Compression Control Protocol' (0x80fd) received
rcvd [IPCP ConfRej id=0x1 <compress VJ 0f 01> <ms-dns3 0.0.0.0>]
sent [IPCP ConfReq id=0x2 <addr 192.168.0.1> <ms-dns1 0.0.0.0>]
rcvd [IPCP ConfNak id=0x2 <addr 172.178.246.233> <ms-dns1 205.188.146.145>]
sent [IPCP ConfReq id=0x3 <addr 172.178.246.233> <ms-dns1 205.188.146.145>]
rcvd [IPCP ConfAck id=0x3 <addr 172.178.246.233> <ms-dns1 205.188.146.145>]
local  IP address 172.178.246.233
remote IP address 62.53.221.197
primary   DNS address 205.188.146.145
capiplugin: phase running (was network).
Script /etc/ppp/ip-up started (pid 10700)
Script /etc/ppp/ip-up finished (pid 10700), status = 0x0

das hab ich mal noch auf der console getippt
unlogisch ist das ich den dns pingen kann...?

Code: Alles auswählen

f-bert:/home/daniel# route
Kernel IP Routentabelle
Ziel            Router          Genmask         Flags Metric Ref    Use Iface
srv2.bob2.media *               255.255.255.255 UH    0      0        0 ppp0
default         srv2.bob2.media 0.0.0.0         UG    0      0        0 ppp0

f-bert:/home/daniel# route -n
Kernel IP Routentabelle
Ziel            Router          Genmask         Flags Metric Ref    Use Iface
62.53.221.197   0.0.0.0         255.255.255.255 UH    0      0        0 ppp0
0.0.0.0         62.53.221.197   0.0.0.0         UG    0      0        0 ppp0

f-bert:/home/daniel# ifconfig
lo        Protokoll:Lokale Schleife
          inet Adresse:127.0.0.1  Maske:255.0.0.0
          inet6 Adresse: ::1/128 Gültigkeitsbereich:Maschine
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:198011 errors:0 dropped:0 overruns:0 frame:0
          TX packets:198011 errors:0 dropped:0 overruns:0 carrier:0
          Kollisionen:0 Sendewarteschlangenlänge:0
          RX bytes:40406239 (38.5 MiB)  TX bytes:40406239 (38.5 MiB)

ppp0      Protokoll:Punkt-zu-Punkt Verbindung
          inet Adresse:172.178.246.233  P-z-P:62.53.221.197  Maske:255.255.255.255
          UP PUNKTZUPUNKT RUNNING NOARP MULTICAST  MTU:1400  Metric:1
          RX packets:6 errors:0 dropped:0 overruns:0 frame:0
          TX packets:7 errors:0 dropped:0 overruns:0 carrier:0
          Kollisionen:0 Sendewarteschlangenlänge:3
          RX bytes:435 (435.0 b)  TX bytes:209 (209.0 b)

f-bert:/home/daniel# ping 172.178.246.233
PING 172.178.246.233 (172.178.246.233) 56(84) bytes of data.
64 bytes from 172.178.246.233: icmp_seq=1 ttl=64 time=0.051 ms
64 bytes from 172.178.246.233: icmp_seq=1 ttl=64 time=0.051 ms
64 bytes from 172.178.246.233: icmp_seq=1 ttl=64 time=0.051 ms
--- 172.178.246.233 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 1999ms
rtt min/avg/max/mdev = 0.047/0.051/0.056/0.006 ms


f-bert:/home/daniel# ping 62.53.221.197
PING 62.53.221.197 (62.53.221.197) 56(84) bytes of data.
--- 62.53.221.197 ping statistics ---
5 packets transmitted, 0 received, 100% packet loss, time 3999ms

f-bert:/home/daniel# more /etc/resolv.conf
nameserver 205.188.146.145

f-bert:/home/daniel# ping 205.188.146.145
PING 205.188.146.145 (205.188.146.145) 56(84) bytes of data.
64 bytes from 205.188.146.145: icmp_seq=1 ttl=127 time=44.8 ms
64 bytes from 205.188.146.145: icmp_seq=2 ttl=127 time=44.8 ms
64 bytes from 205.188.146.145: icmp_seq=3 ttl=127 time=43.7 ms

thx daniel

[Savar]

was ist dein Problem? Vielleicht lässt dein Gateway sich nicht anpingen?!!

[f-bert]

das Problem ist das nur DNS funktioniert. weder ping auf irgendeinen Server im Netz funktioniert, sowie das laden von Webseiten geht auch nicht.
(Unter Windows konnte ich jedoch eine DFÜ Verbindung zu AOL herstellen.)
weiss echt nicht wo der Fehler liegt.

[Savar]

kannst du denn DNS Auflösung machen? Also "nslookup http://www.gmx.de" als Beispiel?

[f-bert]

geht scheinbar wunderbar:

Code: Alles auswählen

f-bert:/home/daniel/Desktop/los-aol-0.0.2.orig# nslookup www.gmx.de
Server:         205.188.146.145
Address:        205.188.146.145#53

Non-authoritative answer:
Name:   www.gmx.de
Address: 213.165.64.215

[Savar]

und was passiert pei

Code: Alles auswählen

ping www.google.de

??

[f-bert]

da passiert halt nix...?

Code: Alles auswählen

f-bert:/home/daniel# ping www.google.de
PING www.l.google.com (66.249.87.104) 56(84) bytes of data.

--- www.l.google.com ping statistics ---
60 packets transmitted, 0 received, 100% packet loss, time 58995ms

[Savar]

was gibt dir ein

Code: Alles auswählen

traceroute 205.188.146.145

aus?

[f-bert]

da kommt folgendes:

Code: Alles auswählen

f-bert:/home/daniel# traceroute 205.188.146.145
traceroute to 205.188.146.145 (205.188.146.145), 30 hops max, 38 byte packets
 1  rt-frrtf09.dial.aol.com (195.93.57.73)  35.709 ms  35.005 ms  36.729 ms
 2  * * *
 3  * * *
...

[f-bert]

so das dfü funktioniert erst nach eingabe des PIN.
mit folgenden einstellung geht es bei mir:

Code: Alles auswählen

#debug
#nodetach
sync
noauth
usepeerdns
nopcomp
hide-password
replacedefaultroute
user benutzer@de.aol.com
plugin userpass.so
password geheim ;)
defaultroute
plugin capiplugin.so
#controller 1
#numberprefix 0
number 01914
protocol hdlc
/dev/null