Problem beim Starten von Xserver -> socket failed for loc

Du kommst mit der Installation nicht voran oder willst noch was nachfragen? Schau auch in den "Tipps und Tricks"-Bereich.
Antworten
hoaruehl
Beiträge: 87
Registriert: 21.06.2004 14:35:22
Kontaktdaten:

Problem beim Starten von Xserver -> socket failed for local

Beitrag von hoaruehl » 23.01.2005 13:55:02

hallo,

beim starten von Xserver (Xfree86) bekomme ich folgende meldung auf dem bildschirm:

Code: Alles auswählen

_XSERVTransSocketOpen: socket() failed for local
_XSERVTransSocketOpenCOTSServer: Unable to open socket for local
_XSERVTransOpen: transport open failed for local/debian:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for local

Fatal server error:
Cannot establish any listening sockets - Make sure an X server isn't already running

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to submit@bugs.debian.org.
hierzu noch meine XF86Config-4 (wobei es nicht an ihr liegen kann, da ich zuvor eine andere konfig verwendet habe, und der fehler trotzdem auftrat)

Code: Alles auswählen

# XF86Config-4 (XFree86 X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# This file is automatically updated on xserver-xfree86 package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xfree86
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands as root:
#
#   cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom
#   md5sum /etc/X11/XF86Config-4 >/var/lib/xfree86/XF86Config-4.md5sum
#   dpkg-reconfigure xserver-xfree86

Section "Files"
	#FontPath	"unix/:7100"			# local font server
	# if the local font server has problems, we can fall back on these
	FontPath        "/usr/lib/X11/fonts/100dpi/:unscaled" 
	FontPath        "/usr/lib/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/lib/X11/fonts/misc"
	FontPath	"/usr/lib/X11/fonts/cyrillic"
	FontPath	"/usr/lib/X11/fonts/Speedo"
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
	FontPath	"/usr/lib/X11/fonts/100dpi"
	FontPath	"/usr/lib/X11/fonts/75dpi"
	#FontPath        "/usr/lib/X11/fonts/Type1"
EndSection

Section "Module"
	Load	"GLcore"
	Load	"bitmap"
	Load	"dbe"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"record"
	Load	"speedo"
	Load	"type1"
	Load	"vbe"
	Load	"xtt"
	SubSection "extmod"
		Option "omit xfree86-dga"
	EndSubSection
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"keyboard"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xfree86"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"de"
	Option		"XkbVariant"	"nodeadkeys"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"SendCoreEvents"	"true"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ImPS/2"
	Option		"Emulate3Buttons"	"true"
	Option		"ZAxisMapping"		"4 5"
EndSection

Section "InputDevice"
	Identifier	"Mouse1"
	Driver		"synaptics"
	Option		"Device"		"/dev/psaux"
	Option		"Protocol"		"auto-dev"
	Option		"LeftEdge"		"1700"
	Option		"RightEdge"		"5300"
	Option		"TopEdge"		"1700"
	Option		"BottomEdge"		"4200"
	Option		"FingerLow"		"25"
	Option		"MaxTapTime"		"180"
	Option		"MaxTapMove"		"220"
	Option		"VertScrollDelta"	"100"
	Option		"MinSpeed"		"0.06"
	Option		"MaxSpeed"		"0.12"
	Option		"AccelFactor"		"0.0010"
	Option		"SHMConfig"		"on"
	Option		"ZAxisMapping"		"4 5"
#	Option		"GuestMouseOff"		"on"
#	Option		"TouchpadOff"		"true"
#	Option		"Repeater"		"/dev/ps2mouse"
EndSection

Section "Device"
	Identifier	"ATI Radeon"
	Driver		"fglrx"
	Option		"UseInternalAGPGART"	"no"
	Option		"VideoOverlay"		"on"
	Option		"OpenGLOverlay"		"off"
EndSection

Section "Monitor"
	Identifier	"Laptop-LCD"
	HorizSync	30-60
	VertRefresh	50-75
	Option		"DPMS"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"ATI Radeon"
	Monitor		"Laptop-LCD"
	DefaultDepth	24
	SubSection "Display"
		Depth		24
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse" 	"CorePointer"
	InputDevice	"Mouse1"		"AlwaysCore"
EndSection

Section "DRI"
	Mode	0666
EndSection
ich besitze eine ATI Mobility Radeon 9700 (falls das von interesse ist) und bin wirklich ratlos, da ich über diesen fehler nichts im google und nichts hier im forum gefunden habe.

wäre um jede hilfestellung dankbar!

gruss
hoaruehl

hoaruehl
Beiträge: 87
Registriert: 21.06.2004 14:35:22
Kontaktdaten:

es rätsels lösung

Beitrag von hoaruehl » 23.01.2005 15:18:59

ok, ich habe herausgefunden an was es lag.

offensichtlich ist der punkt "Unix domain sockets" im kernel sehr wichtig, aus einem mir jedoch unkannten grund habe ich den nicht einkompiliert :D

also, für alle die das selbe problem haben werden:

menuconfig -> device drivers -> networking support -> networking options -> <*> Unix domain sockets

und das wars :)

Antworten