Nach "fehlerfreiem" Kernelupdate ... (gelöst)

Welches Modul/Treiber für welche Hardware, Kernel compilieren...
Antworten
JochenS
Beiträge: 17
Registriert: 05.01.2005 15:59:37
Wohnort: Passau
Kontaktdaten:

Nach "fehlerfreiem" Kernelupdate ... (gelöst)

Beitrag von JochenS » 18.01.2005 19:20:01

Ein "Hallo" an die Runde....

ich habe eine Frage zum Kernelupdate auf Sarge,das ich schon gemacht habe.


Mein Vorgehen dazu:

1. aptitude update %% apt-get update %% aptitude clean && apt-get clean

2. aptitude install kernel-image-2.6.8-1-686
(kernel-image-2.6.8-1-686 - Linux kernel image for version 2.6.8 on PPro/Celeron/PII/PIII/PIV.)

3. lilo.conf auf den "initrd=/initrd.img"-Eintrag geprüft

4. /sbin/lilo

5. reboot

Der Rechner startet ohne erkennbaren Fehler.
Nur wenn ich überprüfen was für Kernel drauf ist dann kommt nur:

>> Linux testsrv 2.4.25 #3 SMP Sun Apr 4 19:32:54 CEST 2004 i686 GNU/Linux <<

Ich bedanke mich

Viele Grüße

Jochen

--------------------

Hier meine Daten:


CPU

Code: Alles auswählen

testsrv:/# cat /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 15
model           : 2
model name      : Intel(R) Celeron(R) CPU 2.40GHz
stepping        : 9
cpu MHz         : 2399.760
cache size      : 128 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 2
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid
bogomips        : 4784.12
lilo.conf

Code: Alles auswählen

testsrv:/# cat /etc/lilo.conf
boot=/dev/hda
serial = 0,57600n8
vga = normal    # force sane state
menu-scheme=Wg:kw:Wg:Wg
read-only
prompt
lba32
timeout=100

# End LILO global Section
#

image = /boot/vmlinuz
  initrd=/initrd.img
  root = /dev/hda3
  label = linux
  append ="console=tty0 console=ttyS0,57600"


image = /boot/vmlinuz.2-4
  root = /dev/hda3
  label = kernel-2-4
  append ="console=tty0 console=ttyS0,57600"


testsrv:/#
/boot

Code: Alles auswählen

testsrv:/# l /boot/
insgesamt 10656
 2    1 drwxr-xr-x   3 root root    1024 2005-01-18 18:44 .
 2    4 drwxr-xr-x  21 root root    4096 2005-01-18 18:42 ..
18    1 -rw-r--r--   1 root root     512 2004-06-07 19:21 boot.0300
12    0 lrwxrwxrwx   1 root root      11 2005-01-18 22:07 boot.b -> boot-menu.b
17  305 -rw-r--r--   1 root root  308326 2005-01-18 18:34 coffee.bmp
27   56 -rw-r--r--   1 root root   55379 2004-11-25 05:32 config-2.6.8-1-686
19    0 lrwxrwxrwx   1 root root      15 2005-01-18 18:34 debian.bmp -> /boot/sarge.bmp
16  152 -rw-r--r--   1 root root  153720 2005-01-18 18:34 debianlilo.bmp
29 4623 -rw-r--r--   1 root root 4714496 2005-01-18 18:42 initrd.img-2.6.8-1-686
11   12 drwx------   2 root root   12288 2004-06-07 18:03 lost+found
30   89 -rw-------   1 root root   89600 2005-01-18 18:44 map
15   25 -rw-r--r--   1 root root   23662 2005-01-18 18:34 sarge.bmp
14   25 -rw-r--r--   1 root root   24116 2005-01-18 18:34 sid.bmp
13  626 -rw----r--   1 root root  636189 2004-04-04 19:15 System.map
28  828 -rw-r--r--   1 root root  841849 2004-11-25 06:07 System.map-2.6.8-1-686
22 1357 -rw----r--   1 root root 1381656 2004-04-04 20:34 vmlinuz
21 1142 -rw-r--r--   1 root root 1163077 2004-11-25 06:07 vmlinuz-2.6.8-1-686
23   28 -rw----r--   1 root root   26851 2004-04-04 20:35 vmlinuz.autoconf.h
24   24 -rw----r--   1 root root   23487 2004-04-04 20:35 vmlinuz.config
25 1357 -rw----r--   1 root root 1381656 2004-04-04 20:35 vmlinuz.2-4
26    1 -rw----r--   1 root root     126 2004-04-04 20:35 vmlinuz.version.h
testsrv:/#
/

Code: Alles auswählen

testsrv:/# l
insgesamt 109
      2  4 drwxr-xr-x  21 root root   4096 2005-01-18 18:42 .
      2  4 drwxr-xr-x  21 root root   4096 2005-01-18 18:42 ..
 212993  4 drwxr-xr-x   2 root root   4096 2005-01-18 18:41 bin
      2  1 drwxr-xr-x   3 root root   1024 2005-01-18 18:44 boot
 229377  4 drwxr-xr-x   2 root root   4096 2004-06-07 19:16 cdrom
 245761 24 drwxr-xr-x  11 root root  24576 2005-01-18 18:46 dev
 376833  4 drwxr-xr-x  49 root root   4096 2005-01-18 19:00 etc
1376257  4 drwxr-xr-x   2 root root   4096 2004-06-07 19:16 floppy
1392641  4 drwxr-sr-x   2 root staff  4096 2004-08-13 19:33 home
1409025  4 drwxr-xr-x   2 root root   4096 2004-06-07 19:16 initrd
     13  0 lrwxrwxrwx   1 root root     27 2005-01-18 18:42 initrd.img -> boot/initrd.img-2.6.8-1-686
1425409  4 drwxr-xr-x   7 root root   4096 2005-01-18 18:32 lib
     11 16 drwx------   2 root root  16384 2004-06-07 18:01 lost+found
1851393  4 drwxr-xr-x   2 root root   4096 2002-02-08 16:42 mnt
1867777  4 drwxr-xr-x   2 root root   4096 2004-06-07 19:16 opt
      1  0 dr-xr-xr-x  36 root root      0 2005-01-18 19:46 proc
1884161  4 drwxr-xr-x   4 root root   4096 2005-01-18 19:00 root
1916929  4 drwxr-xr-x   2 root root   4096 2005-01-18 18:41 sbin
3801094  4 drwxr-xr-x   2 root root   4096 2004-12-27 03:40 sys
  98305  4 drwxrwxrwt   2 root root   4096 2005-01-18 18:46 tmp
1933313  4 drwxr-xr-x  12 root root   4096 2005-01-18 18:30 usr
 131073  4 drwxr-xr-x  13 root root   4096 2004-06-07 19:16 var
     14  0 lrwxrwxrwx   1 root root     24 2005-01-18 18:42 vmlinuz -> boot/vmlinuz-2.6.8-1-686
     12  0 lrwxrwxrwx   1 root root     13 2005-01-18 22:07 vmlinuz.old -> /boot/vmlinuz
testsrv:/#


[/code]
Zuletzt geändert von JochenS am 19.01.2005 08:21:50, insgesamt 1-mal geändert.

JochenS
Beiträge: 17
Registriert: 05.01.2005 15:59:37
Wohnort: Passau
Kontaktdaten:

Beitrag von JochenS » 19.01.2005 08:21:18

Hat sich erledigt.

Manchmal sieht man vor lauter Bäumen den Wald nicht

Das Image ging immer noch auf den 2.4 statt auf den 2.6
ALT: image = /boot/vmlinuz

NEU: image = /vmlinuz

und schon hat er den 2.6 drin

Man bin ich ein Dr****el.
Aber Selbsterkenntnis ist der beste Weg.

Gruss

Jochen

Antworten