server nach installation ... [gelöst]

[startx]

hallo.

ich habe heute nachmittag versucht, einen alturo-rootserver mit vorinstalliertem
SUSE auf debian umzustellen. bin der bekannten anleitung von Lordy
http://www.rootforum.de/faq/index.php?s ... 83&lang=de

gefolgt. alles lief soweit glatt.
allerdings kann ich den server nach dem reboot nicht merh anpingen.
habe mich dann weider über das rescue-system eingeloggt und
mit chroot auf debian gewechselt.

glaubt ma der /var/log/messages, so ist der server völlig okay hochgefahren:
(hab den APIC und BIOS Teil rausgelassen)

Code: Alles auswählen

Dec 18 21:44:19 a15172245 syslogd 1.4.1#10: restart.
Dec 18 21:44:19 a15172245 kernel: klogd 1.4.1#10, log source = /proc/kmsg started.
Dec 18 21:44:19 a15172245 kernel: Inspecting /boot/System.map-2.4.18-bf2.4
Dec 18 21:44:19 a15172245 kernel: Loaded 19390 symbols from /boot/System.map-2.4.18-bf2.4.
(...)
Dec 18 21:44:19 a15172245 kernel: Linux NET4.0 for Linux 2.4
Dec 18 21:44:19 a15172245 kernel: Based upon Swansea University Computer Society NET3.039
Dec 18 21:44:19 a15172245 kernel: Initializing RT netlink socket
Dec 18 21:44:19 a15172245 kernel: Starting kswapd
(...)
Dec 18 21:44:19 a15172245 kernel: hda: IC35L040AVVN07-0, ATA DISK drive
Dec 18 21:44:19 a15172245 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Dec 18 21:44:19 a15172245 kernel: hda: 80418240 sectors (41174 MB) w/1863KiB Cache, CHS=5005/255/63
Dec 18 21:44:19 a15172245 kernel: ide-floppy driver 0.97.sv
Dec 18 21:44:19 a15172245 kernel: Partition check:
Dec 18 21:44:19 a15172245 kernel:  hda: hda1 hda2 hda4 < hda5 hda6 hda7 >
Dec 18 21:44:19 a15172245 kernel: floppy0: no floppy controllers found
Dec 18 21:44:19 a15172245 kernel: Loading I2O Core - (c) Copyright 1999 Red Hat Software
Dec 18 21:44:19 a15172245 kernel: I2O configuration manager v 0.04.
Dec 18 21:44:19 a15172245 kernel:   (C) Copyright 1999 Red Hat Software
Dec 18 21:44:19 a15172245 kernel: loop: loaded (max 8 devices)
Dec 18 21:44:19 a15172245 kernel: Compaq CISS Driver (v 2.4.5)
Dec 18 21:44:19 a15172245 kernel: 8139cp 10/100 PCI Ethernet driver v0.0.6 (Nov 19, 2001)
Dec 18 21:44:19 a15172245 kernel: 8139too Fast Ethernet driver 0.9.24
Dec 18 21:44:19 a15172245 kernel: eth0: RealTek RTL8139 Fast Ethernet at 0xd001a000, 00:20:ed:44:35:69, IRQ 15
Dec 18 21:44:19 a15172245 kernel: HDLC support module revision 1.02 for Linux 2.4
Dec 18 21:44:19 a15172245 kernel: Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Dec 18 21:44:19 a15172245 kernel: Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
Dec 18 21:44:19 a15172245 kernel: ide-floppy driver 0.97.sv
Dec 18 21:44:19 a15172245 kernel: Highpoint HPT370 Softwareraid driver for linux version 0.01
Dec 18 21:44:19 a15172245 kernel: No raid array found
Dec 18 21:44:19 a15172245 kernel: SCSI subsystem driver Revision: 1.00
Dec 18 21:44:19 a15172245 kernel: Red Hat/Adaptec aacraid driver, Apr 12 2004
Dec 18 21:44:19 a15172245 kernel: DC390: 0 adapters found
Dec 18 21:44:19 a15172245 kernel: 3ware Storage Controller device driver for Linux v1.02.00.016.
Dec 18 21:44:19 a15172245 kernel: 3w-xxxx: No cards with valid units found.
Dec 18 21:44:19 a15172245 kernel: i2o_scsi.c: Version 0.0.1
Dec 18 21:44:19 a15172245 kernel:   chain_pool: 0 bytes @ c13e4b40
Dec 18 21:44:19 a15172245 kernel:   (512 byte buffers X 4 can_queue X 0 i2o controllers)
Dec 18 21:44:19 a15172245 kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Dec 18 21:44:19 a15172245 kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Dec 18 21:44:19 a15172245 kernel: IP: routing cache hash table of 2048 buckets, 16Kbytes
Dec 18 21:44:19 a15172245 kernel: TCP: Hash tables configured (established 16384 bind 16384)
Dec 18 21:44:19 a15172245 kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Dec 18 21:44:19 a15172245 kernel: EXT3-fs: INFO: recovery required on readonly filesystem.
Dec 18 21:44:19 a15172245 kernel: EXT3-fs: write access will be enabled during recovery.
Dec 18 21:44:19 a15172245 kernel: kjournald starting.  Commit interval 5 seconds
Dec 18 21:44:19 a15172245 kernel: EXT3-fs: recovery complete.
Dec 18 21:44:19 a15172245 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Dec 18 21:44:19 a15172245 kernel: VFS: Mounted root (ext3 filesystem) readonly.
Dec 18 21:44:19 a15172245 kernel: Freeing unused kernel memory: 280k freed
Dec 18 21:44:19 a15172245 kernel: Adding Swap: 2048276k swap-space (priority -1)
Dec 18 21:44:19 a15172245 kernel: EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,5), internal journal
Dec 18 21:44:19 a15172245 kernel: via-rhine.c:v1.10-LK1.1.13  Nov-17-2001  Written by Donald Becker
Dec 18 21:44:19 a15172245 kernel:   http://www.scyld.com/network/via-rhine.html
Dec 18 21:44:19 a15172245 kernel: kjournald starting.  Commit interval 5 seconds
Dec 18 21:44:19 a15172245 kernel: EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,1), internal journal
Dec 18 21:44:19 a15172245 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Dec 18 21:44:19 a15172245 kernel: kjournald starting.  Commit interval 5 seconds
Dec 18 21:44:19 a15172245 kernel: EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,6), internal journal
Dec 18 21:44:19 a15172245 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Dec 18 21:44:19 a15172245 kernel: kjournald starting.  Commit interval 5 seconds
Dec 18 21:44:19 a15172245 kernel: EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,7), internal journal
Dec 18 21:44:19 a15172245 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Dec 18 21:44:19 a15172245 kernel: eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 41e1.

(...)

daran scheint nicht (meiner bescheidenen Meinung nach) nicht gelegen zu haben.

/etc/network/interfaces

Code: Alles auswählen

auto lo eth0
iface lo inet loopback
#iface eth0 inet dhcp

iface eth0 inet static
      address 217.160.142.69
      netmask 255.255.255.255
      network 217.160.0.0
      broadcast 217.160.142.69
      gateway 217.160.142.1

wobei ich beides(dhcp und static) schon ausprobiert habe.

in der etc/hosts steht

Code: Alles auswählen

127.0.0.1 localhost
217.160.142.69 a15172245.alturo-server.de a15172245

# The following lines are desirable for IPv6 capable hosts
# (added automatically by netbase upgrade)

::1     ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts

wahscheinlich hapert es an irgend was lächerlichem,
aber hat jemand eine idee für mich?

startx.

[gms]

wahscheinlich hapert es an irgend was lächerlichem,
aber hat jemand eine idee für mich?

glaube ich auch

probier mal mit traceroute wie weit du kommst.

Code: Alles auswählen

root@gms1:/etc/network# ping 217.160.142.69
PING 217.160.142.69 (217.160.142.69) 56(84) bytes of data.
64 bytes from 217.160.142.69: icmp_seq=1 ttl=56 time=32.6 ms
64 bytes from 217.160.142.69: icmp_seq=2 ttl=56 time=32.6 ms
64 bytes from 217.160.142.69: icmp_seq=3 ttl=56 time=34.7 ms

geht ja

[startx]

nein, nein, als du gerade gepingt hast, lief das rescue system ...
jetzt wird das nicht mehr gehen

[gms]

geht nimma

[gms]

deine broadcast addresse ist falsch, bist du wieder im rescue system?

[startx]

peinlich. hatte ich grad gemerkt. warn tippfehler, jetzt funzt es.