Hallo !
Habe alles mal, wie Du es mir vorgeschlagen hast, kontrolliert !
Konnte in der "etc/ppp/peers/dsl-provider" und den "pap/chap-secrets" eine zweite und falsche Benutzerkennung auskommentieren. Das war es aber leider nicht !
Habe mal folgendes auf der Konsole probiert:
Code: Alles auswählen
debian:~# pon dsl-provider
debian:~# pppstats
IN PACK VJCOMP VJUNC VJERR | OUT PACK VJCOMP VJUNC NON-VJ
0 0 0 0 0 | 0 0 0 0 0
debian:~# ping 141.76.2.4
connect: Network is unreachable
debian:~# apt-get update
Fehl http://security.debian.org stable/updates/main Packages
Temporary failure resolving 'security.debian.org'
Fehl http://security.debian.org stable/updates/main Release
Temporary failure resolving 'security.debian.org'
Fehl http://security.debian.org stable/updates/contrib Packages
Temporary failure resolving 'security.debian.org'
Fehl http://security.debian.org stable/updates/contrib Release
Temporary failure resolving 'security.debian.org'
Konnte http://security.debian.org/dists/stable/updates/main/binary-i386/Packages.gz nicht holen Temporary failure resolving 'security.debian.org'
Konnte http://security.debian.org/dists/stable/updates/main/binary-i386/Release nicht holen Temporary failure resolving 'security.debian.org'
Konnte http://security.debian.org/dists/stable/updates/contrib/binary-i386/Packages.gz nicht holen Temporary failure resolving 'security.debian.org'
Konnte http://security.debian.org/dists/stable/updates/contrib/binary-i386/Release nicht holen Temporary failure resolving 'security.debian.org'
Paketlisten werden gelesen... Fertig
W: Kann nicht auf die Liste http://security.debian.org stable/updates/main Packages (/var/lib/apt/lists/security.debian.org_dists_stable_updates_main_binary-i386_Packages) der Quellpakete zugreifen. - stat (2 Datei oder Verzeichnis nicht gefunden)
W: Kann nicht auf die Liste http://security.debian.org stable/updates/contrib Packages (/var/lib/apt/lists/security.debian.org_dists_stable_updates_contrib_binary-i386_Packages) der Quellpakete zugreifen. - stat (2 Datei oder Verzeichnis nicht gefunden)
W: Sie möchten vielleicht ,,apt-get update" aufrufen, um diese Probleme zu lösen
E: Einige Indexdateien konnten nicht heruntergeladen werden, sie wurden ignoriert oder alte an ihrer Stelle benutzt.
debian:~# poff dsl-provider
Hier die verschiedenen Konfiguratonsdateien:
pap-secrets
Code: Alles auswählen
#
# /etc/ppp/pap-secrets
#
# This is a pap-secrets file to be used with the AUTO_PPP function of
# mgetty. mgetty-0.99 is preconfigured to startup pppd with the login option
# which will cause pppd to consult /etc/passwd (and /etc/shadow in turn)
# after a user has passed this file. Don't be disturbed therfore by the fact
# that this file defines logins with any password for users. /etc/passwd
# (again, /etc/shadow, too) will catch passwd mismatches.
#
# This file should block ALL users that should not be able to do AUTO_PPP.
# AUTO_PPP bypasses the usual login program so its necessary to list all
# system userids with regular passwords here.
#
# ATTENTION: The definitions here can allow users to login without a
# password if you don't use the login option of pppd! The mgetty Debian
# package already provides this option; make sure you don't change that.
# INBOUND connections
# Every regular user can use PPP and has to use passwords from /etc/passwd
* hostname "" *
# UserIDs that cannot use PPP at all. Check your /etc/passwd and add any
# other accounts that should not be able to use pppd!
guest hostname "*" -
master hostname "*" -
root hostname "*" -
support hostname "*" -
stats hostname "*" -
# OUTBOUND connections
# Here you should add your userid password to connect to your providers via
# PAP. The * means that the password is to be used for ANY host you connect
# to. Thus you do not have to worry about the foreign machine name. Just
# replace password with your password.
# If you have different providers with different passwords then you better
# remove the following line.
# * password
# "267682" * "Passwort"
"2676-82" * "Passwort"
Code: Alles auswählen
# Secrets for authentication using CHAP
# client server secret IP addresses
# "267682" * "Passwort"
"2676-82" * "Passwort"
Code: Alles auswählen
# Configuration file for PPP, using PPP over Ethernet
# to connect to a DSL provider.
#
# See the manual page pppd(8) for information on all the options.
##
# Section 1
#
# Stuff to configure...
# MUST CHANGE: Uncomment the following line, replacing the user@provider.net
# by the DSL user name given to your by your DSL provider.
# (There should be a matching entry in /etc/ppp/pap-secrets with the password.)
#user myusername@myprovider.net
# Use the pppoe program to send the ppp packets over the Ethernet link
# This line should work fine if this computer is the only one accessing
# the Internet through this DSL connection. This is the right line to use
# for most people.
pty "/usr/sbin/pppoe -I eth0 -T 80 -m 1452"
# An even more conservative version of the previous line, if things
# don't work using -m 1452...
#pty "/usr/sbin/pppoe -I eth0 -T 80 -m 1412"
# If the computer connected to the Internet using pppoe is not being used
# by other computers as a gateway to the Internet, you can try the following
# line instead, for a small gain in speed:
#pty "/usr/sbin/pppoe -I eth0 -T 80"
# The following two options should work fine for most DSL users.
# Assumes that your IP address is allocated dynamically
# by your DSL provider...
noipdefault
# Try to get the name server addresses from the ISP.
# Use this connection as the default route.
# Comment out if you already have the correct default route installed.
defaultroute
##
# Section 2
#
# Uncomment if your DSL provider charges by minute connected
# and you want to use demand-dialing.
#
# Disconnect after 300 seconds (5 minutes) of idle time.
#demand
#idle 300
##
# Section 3
#
# You shouldn't need to change these options...
hide-password
lcp-echo-interval 60
lcp-echo-failure 3
# Override any connect script that may have been set in /etc/ppp/options.
connect /bin/true
noauth
persist
mtu 1492
# RFC 2516, paragraph 7 mandates that the following options MUST NOT be
# requested and MUST be rejected if requested by the peer:
# Address-and-Control-Field-Compression (ACFC)
noaccomp
# Asynchronous-Control-Character-Map (ACCM)
default-asyncmap
user "2676-82"
usepeerdns
Mein Passwort habe ich ersetzt durch "Passwort" !
Bei dem apt-get update habe ich vorher die sources.list geändert !
Ich hoffe Dich jetzt nicht erschlagen zu haben !
Noch eines:
Wenn ich ein pon dsl-provider ausführe, dann kann ich an Hand der Statuslampen des DSL-Modems ( also dem SE515 ) sehen, dass eine Reaktion auf den Befehl kommt.
Bei der Eingabe in einen Web-Browser kommt leider nur eine Fehlermeldung, also keine Reaktion !
Habe allerdings nicht`s weiter konfiguriert. Weder bei dem Browser noch die Netzwerkkarte.
Vielleicht ist ja auch hier mein Problem ?
Bei dem ersten Versuch mit meinem Red Hat Rechner, habe ich auch ein wenig hin und her probiert, jedoch ohne Erfolg !
Du sagtest, dass ich nicht so viel probieren soll, da sonst der Provider den Zugang lahm legt !
Was könnte es jetzt noch sein ?
Nicht die ganze Datei bitte.
