ip-up geht nicht?!

Gemeinsam ins Internet mit Firewall und Proxy.
Antworten
Benutzeravatar
sobdog
Beiträge: 16
Registriert: 02.07.2002 16:57:08
Wohnort: Düren

ip-up geht nicht?!

Beitrag von sobdog » 25.10.2002 15:19:39

Hallo,

ich habe ein Problem.. :/
Mein Script wird über ip-up beim connect nicht durchgeführt.. ich habe einige Tests gemacht:

Code: Alles auswählen

Zion:/etc/ppp/ip-up.d# run-parts /etc/ppp/ip-up.d
IPv6 Tunnel updated

Das Script selbst funktioniert also.

Code: Alles auswählen

Zion:/etc/ppp/ip-up.d# run-parts --test /etc/ppp/ip-up.d/
/etc/ppp/ip-up.d//0ipv6tunnel
run-parts nimmt das script also an.

Code: Alles auswählen

#!/bin/sh
#
# $Id: ip-up,v 1.2 1998/02/10 21:25:34 phil Exp $
#
# This script is run by the pppd after the link is established.
# It uses run-parts to run scripts in /etc/ppp/ip-up.d, so to add routes,
# set IP address, run the mailq etc. you should create script(s) there.
#
# Be aware that other packages may include /etc/ppp/ip-up.d scripts (named
# after that package), so choose local script names with that in mind.
#
# This script is called with the following arguments:
#    Arg  Name                          Example
#    $1   Interface name                ppp0
#    $2   The tty                       ttyS1
#    $3   The link speed                38400
#    $4   Local IP number               12.34.56.78
#    $5   Peer  IP number               12.34.56.99
#    $6   Optional ``ipparam'' value    foo

# The  environment is cleared before executing this script
# so the path must be reset
PATH=/usr/local/sbin:/usr/sbin:/sbin:/usr/local/bin:/usr/bin:/bin
export PATH
# These variables are for the use of the scripts run by run-parts
PPP_IFACE="$1"
PPP_TTY="$2"
PPP_SPEED="$3"
PPP_LOCAL="$4"
PPP_REMOTE="$5"
PPP_IPPARAM="$6"
export PPP_IFACE PPP_TTY PPP_SPEED PPP_LOCAL PPP_REMOTE PPP_IPPARAM


# as an additional convenience, $PPP_TTYNAME is set to the tty name,
# stripped of /dev/ (if present) for easier matching.
PPP_TTYNAME=`/usr/bin/basename "$2"`
export PPP_TTYNAME

# Main Script starts here

run-parts /etc/ppp/ip-up.d

# last line
So sieht meine /etc/ppp/ip-up aus.

Code: Alles auswählen

Zion:/etc/ppp/ip-up.d# ls -l
total 20
-rwxr-xr-x    1 root     root          840 Oct 25 13:34 0ipv6tunnel
Die richtigen Rechte sollten dies auch sein.


Hat jemand eine Idee???

Antworten