ich habe einen DNS bei dyndns.org. Weiterhin habe ich einen ddlcient 3.6.3 installiert.
Er läuft, jedoch schickt er kein Signal an dyndns.org.
Ich habe keinen Router. Ich habe 2 Netzwerkkarten in meinem Linuxserver und gehe über PPP mit Adsl ins www.
Hier meine Configs.
/etc/ddclient.conf
Code: Alles auswählen
######################################################################
daemon=300 # check every 300 seconds
syslog=yes # log update msgs to syslog
mail=root # mail all msgs to root
mail-failure=root # mail failed update msgs to root
pid=/var/run/ddclient.pid
## To obtain an IP address from Web status page (using the proxy if defined)
#use=web, web=checkip.dyndns.org/, web-skip='IP Address' # found after IP Address
#
#use=ip, ip=127.0.0.1 # via static IP's
#use=if, if=eth0 # via interfaces
#use=web # via web
#
#protocol=dyndns2 # default protocol
#proxy=fasthttp.sympatico.ca:80 # default proxy
#server=members.dyndns.org # default server
#server=members.dyndns.org:8245 # default server (bypassing proxies)
login=mylogin # default login
password=mypassy # default password
#mx=mx.for.your.host # default MX
#backupmx=yes|no # host is primary MX?
#wildcard=yes|no # add wildcard CNAME?
##
## dyndns.org dynamic addresses
##
## (supports variables: wildcard,mx,backupmx)
##
server=members.dyndns.org, \
protocol=dyndns2 \
myhome.net
Code: Alles auswählen
## From the manual page for my pppd, these aguments are:
## scriptname interface-name tty-device speed local-IP-address remote-IP-address ipparam
##
## Some people have reported that their pppd returns their
## local-IP-address as $3. If that's also the case for you,
## you may need to change the $4 below to $3. This may not
## be necessary if you pppd also passes the local-ip-address
## in the environment as either PPP_LOCAL or IPLOCAL.
##
######################################################################
PATH=/usr/sbin:${PATH}
IP=
IP=${IP:-$PPP_LOCAL}
IP=${IP:-$IPLOCAL}
IP=${IP:-$4}
## update the DNS server unless the IP address is a private address
## that may be used as a internal LAN address (or PPtP tunnel).
logger -t ddclient $0 $*
case "$IP" in
10.*) ;;
172.1[6-9].* | 172.2[0-9].* | 172.3[0-1].*) ;;
192.168.*) ;;
"") logger -t ddclient No local IP given so cannot update
;;
*) (
sleep 5
ddclient -daemon=0 -syslog -use=if -if=$1 >/dev/null 2>&1
) &
;;
esac
Ich wäre Euch echt dankbar ............................. !!!!
Hypie
edit bert: code tags eingefügt