/dev/ide/host0/bus0/target0/lun0:hda: dma_intr: status=0x51

[marajade]

Hallo

ähm ich Habe eine Netinstallation von Sarge druchgeführt. Eigentlich hat alles Super geklappt nur jetzt sind irgendwelche "beängstigenden" Errorcodes in der Messages Datei.

Hab auch schon ein fsck ausgeführt und dieses meldete dann das er alles berichtigt hatte. Was bedeuten diese Errorcodes?

Ist meine Platte dabei den Geist aufzugeben?

Danke im vorraus

auszug:

Aug 14 22:59:01 localhost kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
Aug 14 22:59:01 localhost kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Aug 14 22:59:01 localhost kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
Aug 14 22:59:01 localhost kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Aug 14 22:59:01 localhost kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
Aug 14 22:59:01 localhost kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Aug 14 22:59:01 localhost kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
Aug 14 22:59:01 localhost kernel: ide0: reset: success
Aug 14 22:59:01 localhost kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Aug 14 22:59:01 localhost kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
Aug 14 22:59:01 localhost kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Aug 14 22:59:01 localhost kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
Aug 14 22:59:01 localhost kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Aug 14 22:59:01 localhost kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
Aug 14 22:59:01 localhost kernel: p1 p2 p3 p4 < p5 p6 >
Aug 14 22:59:01 localhost kernel: SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
Aug 14 22:59:01 localhost kernel: SGI XFS Quota Management subsystem
Aug 14 22:59:01 localhost kernel: kjournald starting. Commit interval 5 seconds
Aug 14 22:59:01 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Aug 14 22:59:01 localhost kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete }

[Tomek]

Kannst du bitte mal die Ausgabe von smartctl -a /dev/hda hier pasten?

[marajade]

Ok Danke hab den befehl eingegeben, hier die Ausgabe:

Device: ST380021A Supports ATA Version 5
Drive supports S.M.A.R.T. and is disabled
Use option -e to enable


Was Soll mir nun das sagen ausser das man SMART einschalten könnte?

[marajade]

Ähm als ich die 2 Festplatte checkte kam folgendes:

Device: Maxtor 6Y080L0 Supports ATA Version 7
Drive supports S.M.A.R.T. and is enabled
Check S.M.A.R.T. Passed.

General Smart Values:
Off-line data collection status: (0x80) Offline data collection activity was
never started

Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run

Total time to complete off-line
data collection: ( 241) Seconds

Offline data collection
Capabilities: (0x5b)SMART EXECUTE OFF-LINE IMMEDIATE
Automatic timer ON/OFF support
Suspend Offline Collection upon new
command
Offline surface scan supported
Self-test supported

Smart Capablilities: (0x0003) Saves SMART data before entering
power-saving mode
Supports SMART auto save timer

Error logging capability: (0x01) Error logging supported

Short self-test routine
recommended polling time: ( 2) Minutes

Extended self-test routine
recommended polling time: ( 37) Minutes

Vendor Specific SMART Attributes with Thresholds:
Revision Number: 16
Attribute Flag Value Worst Threshold Raw Value
( 3)Spin Up Time 0x0027 226 225 063 7870
( 4)Start Stop Count 0x0032 253 253 000 69
( 5)Reallocated Sector Ct 0x0033 253 253 063 0
( 6)Read Channel Margin 0x0001 253 253 100 0
( 7)Seek Error Rate 0x000a 253 252 000 0
( Seek Time Preformance 0x0027 253 249 187 34992
( 9)Power On Hours 0x0032 253 253 000 13709
( 10)Spin Retry Count 0x002b 253 252 157 0
( 11)Calibration Retry Count 0x002b 253 252 223 0
( 12)Power Cycle Count 0x0032 253 253 000 71
(192)Power-Off Retract Count 0x0032 253 253 000 0
(193)Load Cycle Count 0x0032 253 253 000 0
(194)Temperature 0x0032 253 253 000 23
(195)Hardware ECC Recovered 0x000a 253 252 000 878
(196)Reallocated Event Count 0x0008 253 253 000 0
(197)Current Pending Sector 0x0008 253 253 000 0
(198)Offline Uncorrectable 0x0008 253 253 000 0
(199)UDMA CRC Error Count 0x0008 199 199 000 0
(200)Unknown Attribute 0x000a 253 252 000 0
(201)Unknown Attribute 0x000a 253 250 000 2
(202)Unknown Attribute 0x000a 253 252 000 0
(203)Unknown Attribute 0x000b 253 252 180 0
(204)Unknown Attribute 0x000a 253 252 000 0
(205)Unknown Attribute 0x000a 253 252 000 0
(207)Unknown Attribute 0x002a 253 252 000 0
(208)Unknown Attribute 0x002a 253 252 000 0
(209)Unknown Attribute 0x0024 190 190 000 0
( 99)Unknown Attribute 0x0004 253 253 000 0
(100)Unknown Attribute 0x0004 253 253 000 0
(101)Unknown Attribute 0x0004 253 253 000 0
SMART Error Log:
SMART Error Logging Version: 1
No Errors Logged