MRTG zeichnet nichts auf

[Cronet]

Hallo,

ich habe mrtg und snmp installiert. MRTG erstellt mir die Graphiken, aber zeichnet nichts auf.

Habe in der snmp.conf diese community geschichten schon geändert und auf meine IP gesetzt (habe auch localhost, 127.0.0.1 probiert). Aber es werden einfach keine Daten aufgezeichnet?

Hat jemand vielleicht einen kleinen Tip der mir helfen könnte?

Viele Grüße,
Alex

[gerry]

wieoft wird der mrtg-aufruf auch im cron gemacht?? (crontab -l)

gruß
gerry

[Cronet]

Hallo ,

also cron startet alle 5 min das skript.

Vielleicht liegt es daran dass cfgmaker auch nicht richtig durchläuft:

Code: Alles auswählen

'Options[_]: bits,growright' --output /etc/mrtg.conf public@127.0.0.1' --global
--base: Get Device Info on public@127.0.0.1:
SNMP Error:
no response received
SNMPv1_Session (remote host: "127.0.0.1" [127.0.0.1].161)
                  community: "public"
                 request ID: 2110951515
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at /usr/lib/perl5/SNMP_util.pm line 456
SNMPGET Problem for sysDescr sysContact sysName sysLocation sysObjectID on public@127.0.0.1:
 at /usr/bin/cfgmaker line 657
--base: Vendor Id:
--base: Populating confcache
--snpo: Skipping ifName scanning because public@127.0.0.1: does not seem to support it
--snpo: Skipping ifDescr scanning because public@127.0.0.1: does not seem to support it
--snpo: Skipping ipAdEntIfIndex scanning because public@127.0.0.1: does not seem to support it
--snpo: Skipping ifType scanning because public@127.0.0.1: does not seem to support it
--snpo: Skipping ifPhysAddress scanning because public@127.0.0.1: does not seem to support it
--base: Get Interface Info
--base: Walking ifIndex
SNMP Error:
no response received
SNMPv1_Session (remote host: "127.0.0.1" [127.0.0.1].161)
                  community: "public"
                 request ID: 2110951521
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at /usr/lib/perl5/SNMP_util.pm line 569
SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.1 on public@127.0.0.1:
 at /usr/bin/cfgmaker line 107
--base: Walking ifType
SNMP Error:
no response received
SNMPv1_Session (remote host: "127.0.0.1" [127.0.0.1].161)
                  community: "public"
                 request ID: 2110951522
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at /usr/lib/perl5/SNMP_util.pm line 569
SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.3 on public@127.0.0.1:
 at /usr/bin/cfgmaker line 107
--base: Walking ifSpeed
SNMP Error:
no response received
SNMPv1_Session (remote host: "127.0.0.1" [127.0.0.1].161)
                  community: "public"
                 request ID: 2110951523
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at /usr/lib/perl5/SNMP_util.pm line 569
SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.5 on public@127.0.0.1:
 at /usr/bin/cfgmaker line 107
--base: Walking ifAdminStatus
SNMP Error:
no response received
SNMPv1_Session (remote host: "127.0.0.1" [127.0.0.1].161)
                  community: "public"
                 request ID: 2110951524
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at /usr/lib/perl5/SNMP_util.pm line 569
SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.7 on public@127.0.0.1:
 at /usr/bin/cfgmaker line 107
--base: Walking ifOperStatus
SNMP Error:
no response received
SNMPv1_Session (remote host: "127.0.0.1" [127.0.0.1].161)
                  community: "public"
                 request ID: 2110951525
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at /usr/lib/perl5/SNMP_util.pm line 569
SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.8 on public@127.0.0.1:
 at /usr/bin/cfgmaker line 107
--base: Writing /etc/mrtg.conf

Egal ob ich 127.0.0.1 oder meine IP eingebe . Es kommt immer die selbe Fehlermedlung.