Nochmals Alsa

[johannes_meyerle]

Ich kriege vom alsaplayer folgende Fehlermeldung:

I could not find a suitable output module on your system. Make sure they`re in "usr/lib/alsaplayer/output"
Use the -o parameter to select one.
failed to load output add-on.

amixer geht auch nicht.

Eintrag wurde in der etc/modules.conf gemacht.

Wer weis da Rat?

[glatzor]

Hast Du Rechte auf /dev/dsp?

Welche Module sind geladen?

Was sagt "/etc/init.d/alsa start"?

[johannes_meyerle]

Hallo nochmal was neues zu meinem Prob. Wenn ich den gnomemixer starte fungiert der sound auf einmal. Abspielen mit xmms kann ich aber trotzdem nix. /etc/init.d/alsa start sagt
alsadriver is already running. Vieleicht weis ja jemand was. Auf der Slake hat das ganze fungiert.

Ich bin jetzt schon 2 Tage dran.

Das komische is auch ohne Eintrag in die /etc/modules.conf ist wenigstens xmms gelaufen, nachdem ich gamix aufgerufen und eingestellt hab. Der restliche sound ging auch. Das
Einstellen ging jedoch nur mit gamix. gmix ging erst nach der einstellung mit gamix.

Bin am verzweifeln.



### This file is automatically generated by update-modules"
#
# Please do not edit this file directly. If you want to change or add
# anything please take a look at the files in /etc/modutils and read
# the manpage for update-modules.
#
### update-modules: start processing /etc/modutils/0keep
# DO NOT MODIFY THIS FILE!
# This file is not marked as conffile to make sure if you upgrade modutils
# it will be restored in case some modifications have been made.
#
# The keep command is necessary to prevent insmod and friends from ignoring
# the builtin defaults of a path-statement is encountered. Until all other
# packages use the new `add path'-statement this keep-statement is essential
# to keep your system working
keep

### update-modules: end processing /etc/modutils/0keep

### update-modules: start processing /etc/modutils/actions
# Special actions that are needed for some modules

# The BTTV module does not load the tuner module automatically,
# so do that in here
post-install bttv insmod tuner
post-remove bttv rmmod tuner


### update-modules: end processing /etc/modutils/actions

### update-modules: start processing /etc/modutils/aliases
# Aliases to tell insmod/modprobe which modules to use

# Uncomment the network protocols you don't want loaded:
# alias net-pf-1 off # Unix
# alias net-pf-2 off # IPv4
# alias net-pf-3 off # Amateur Radio AX.25
# alias net-pf-4 off # IPX
# alias net-pf-5 off # DDP / appletalk
# alias net-pf-6 off # Amateur Radio NET/ROM
# alias net-pf-9 off # X.25
# alias net-pf-10 off # IPv6
# alias net-pf-11 off # ROSE / Amateur Radio X.25 PLP
# alias net-pf-19 off # Acorn Econet

alias char-major-10-175 agpgart
alias char-major-10-200 tun
alias char-major-81 bttv
alias char-major-108 ppp_generic
alias /dev/ppp ppp_generic
alias tty-ldisc-3 ppp_async
alias tty-ldisc-14 ppp_synctty
alias ppp-compress-21 bsd_comp
alias ppp-compress-24 ppp_deflate
alias ppp-compress-26 ppp_deflate

# Crypto modules (see http://www.kerneli.org/)
alias loop-xfer-gen-0 loop_gen
alias loop-xfer-3 loop_fish2
alias loop-xfer-gen-10 loop_gen
alias cipher-2 des
alias cipher-3 fish2
alias cipher-4 blowfish
alias cipher-6 idea
alias cipher-7 serp6f
alias cipher-8 mars6
alias cipher-11 rc62
alias cipher-15 dfc2
alias cipher-16 rijndael
alias cipher-17 rc5Hallo, hier erstmals auf diesem Weg meine Module.Hallo, hier erstmals auf diesem Weg meine Module.


### update-modules: end processing /etc/modutils/aliases

### update-modules: start processing /etc/modutils/alsa
# Alsa-Moduleintrag
# Stand 24.09.2002
# Meyerle Johannes
# Workstation
alias char-major-116 snd
alias char-major-14 soundcore
alias snd-card-0 snd-fm801

# Optionen für diesen Treiber fm801
options snd-fm801 snd_enable=1 snd_index=0
options snd snd_cards_limit=1 snd_major=116

alias sound-slot0 snd-card-0
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-11 snd-mixer-oss
alias sound-service-0-12 snd-pcm-oss

# Ende Alsa

### update-modules: end processing /etc/modutils/alsa

### update-modules: start processing /etc/modutils/alsa-path
# Debian ALSA modules path
# Do not edit this unless you understand what you're doing.
#path=/lib/modules/`uname -r`/alsa
# Die obige Zeile wurde von mir am 23.09.2002 auskommentiert !!!!!!!!!!!!!
#?????????????????????????????????????????????????????????????????????????

### update-modules: end processing /etc/modutils/alsa-path

### update-modules: start processing /etc/modutils/alsa-path.save
# Debian ALSA modules path
# Do not edit this unless you understand what you're doing.
path=/lib/modules/`uname -r`/alsa

### update-modules: end processing /etc/modutils/alsa-path.save

### update-modules: start processing /etc/modutils/paths
# This file contains a list of paths that modprobe should scan,
# beside the once that are compiled into the modutils tools
# themselves.


### update-modules: end processing /etc/modutils/paths

### update-modules: start processing /etc/modutils/ppp
alias /dev/ppp ppp_generic
alias char-major-108 ppp_generic
alias tty-ldisc-3 ppp_async
alias tty-ldisc-14 ppp_synctty
alias ppp-compress-21 bsd_comp
alias ppp-compress-24 ppp_deflate
alias ppp-compress-26 ppp_deflate

### update-modules: end processing /etc/modutils/ppp

### update-modules: start processing /etc/modutils/setserial
#
# This is what I wanted to do, but logger is in /usr/bin, which isn't loaded
# when the module is first loaded into the kernel at boot time!
#
#post-install serial /etc/init.d/setserial start | logger -p daemon.info -t "setserial-module reload"
#pre-remove serial /etc/init.d/setserial stop | logger -p daemon.info -t "setserial-module uload"
#
alias /dev/tts serial
alias /dev/tts/0 serial
alias /dev/tts/1 serial
alias /dev/tts/2 serial
alias /dev/tts/3 serial
post-install serial /etc/init.d/setserial modload > /dev/null 2> /dev/null
pre-remove serial /etc/init.d/setserial modsave > /dev/null 2> /dev/null

### update-modules: end processing /etc/modutils/setserial

### update-modules: start processing /etc/modutils/arch/i386
alias parport_lowlevel parport_pc
alias char-major-10-144 nvram
alias binfmt-0064 binfmt_aout
alias char-major-10-135 rtc

### update-modules: end processing /etc/modutils/arch/i386


Hier sind meine geladenen Module

Module Size Used by Not tainted
scanner 8480 0 (unused)
printer 7744 0 (unused)
snd-pcm-oss 36900 1
snd-mixer-oss 9504 0 [snd-pcm-oss]
snd-fm801 7780 1
snd-opl3-lib 5728 0 [snd-fm801]
snd-hwdep 3744 0 [snd-opl3-lib]
snd-pcm 59616 0 [snd-pcm-oss snd-fm801]
snd-timer 11456 0 [snd-opl3-lib snd-pcm]
snd-ac97-codec 24688 0 [snd-fm801]
snd-mpu401-uart 3008 0 [snd-fm801]
snd-rawmidi 13600 0 [snd-mpu401-uart]
snd-seq-device 3984 0 [snd-opl3-lib snd-rawmidi]
snd 27272 0 [snd-pcm-oss snd-mixer-oss snd-fm801 snd-opl3-lib snd-hwdep snd-pcm snd-timer snd-ac97-codec snd-mpu401-uart snd-rawmidi snd-seq-device]
smbfs 33504 0 (unused)
ntfs 50176 0 (unused)
keybdev 1696 0 (unused)

Hier sieht man wie ls aussieht

lrwxrwxrwx 1 root root 9 Sep 23 23:21 dsp -> /dev/dsp0
crwxrwxrwx 1 root audio 14, 3 Sep 23 23:21 dsp0
crw-rw---- 1 root audio 14, 19 Sep 23 23:21 dsp1
crw-rw---- 1 root audio 14, 35 Sep 23 23:21 dsp2
crw-rw---- 1 root audio 14, 51 Sep 23 23:21 dsp3

Hier nochmals eine ausgabe, die mich stört

Sep 24 22:33:13 workstation modprobe: modprobe: Can't locate module sound-slot-1
Sep 24 22:33:13 workstation modprobe: modprobe: Can't locate module sound-service-1-0

Warum sound-service slot-1

Hier nochmals die Ausgabe von lspci -v
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 735 Host (rev 01)
Flags: bus master, medium devsel, latency 32
Memory at d0000000 (32-bit, non-prefetchable)
Capabilities: [c0] AGP version 2.0

00:01.0 PCI bridge: Silicon Integrated Systems [SiS] 5591/5592 AGP (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: cfd00000-cfefffff
Prefetchable memory behind bridge: bfb00000-cfbfffff

00:02.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513
Flags: bus master, medium devsel, latency 0

00:02.2 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 07) (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems: Unknown device 0a14
Flags: bus master, medium devsel, latency 64, IRQ 5
Memory at cfffe000 (32-bit, non-prefetchable)

00:02.3 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 07) (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems: Unknown device 0a14
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at cffff000 (32-bit, non-prefetchable)

00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0) (prog-if 80 [Master])
Subsystem: Silicon Integrated Systems [SiS] SiS5513 EIDE Controller (A,B step)
Flags: bus master, fast devsel, latency 128
I/O ports at ff00

00:09.0 Multimedia audio controller: Fortemedia, Inc Xwave QS3000A [FM801] (rev b2)
Subsystem: Fortemedia, Inc: Unknown device 1319
Flags: bus master, medium devsel, latency 64, IRQ 5
I/O ports at d800
Capabilities: [dc] Power Management version 1

00:09.1 Input device controller: Fortemedia, Inc Xwave QS3000A [FM801 game port] (rev b2)
Subsystem: Fortemedia, Inc: Unknown device 1319
Flags: bus master, medium devsel, latency 64
I/O ports at dc00
Capabilities: [dc] Power Management version 1

00:0b.0 Ethernet controller: 3Com Corporation 3c905C-TX [Fast Etherlink] (rev 74)
Subsystem: 3Com Corporation 3C905C-TX Fast Etherlink for PC Management NIC
Flags: bus master, medium devsel, latency 64, IRQ 5
I/O ports at d400
Memory at cfffdf80 (32-bit, non-prefetchable)
Expansion ROM at cffc0000 [disabled]
Capabilities: [dc] Power Management version 2

00:0f.0 Multimedia video controller: Brooktree Corporation Bt878 (rev 11)
Subsystem: Hauppauge computer works Inc. WinTV/GO
Flags: bus master, medium devsel, latency 64, IRQ 5
Memory at cfcfe000 (32-bit, prefetchable)
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2

00:0f.1 Multimedia controller: Brooktree Corporation Bt878 (rev 11)
Subsystem: Hauppauge computer works Inc. WinTV/GO
Flags: bus master, medium devsel, latency 64, IRQ 5
Memory at cfcff000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2

01:00.0 VGA compatible controller: ATI Technologies Inc Radeon QD (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc: Unknown device 000a
Flags: bus master, stepping, 66Mhz, medium devsel, latency 64, IRQ 5
Memory at c0000000 (32-bit, prefetchable) [size=128M]
I/O ports at b800 [size=256]
Memory at cfe80000 (32-bit, non-prefetchable) [size=512K]
Expansion ROM at cfe60000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Capabilities: [50] Power Management version 2

[johannes_meyerle]

Hab jetzt rausgefunden, daß ich ful-duplex abstellen muß. Das mix dem alsamixer geht immer noch
nicht. Wenn ich die ful-duplexfähigkeit abstelle, kommt jetzt wenigstens was aus meinem Xmms
Die anderen Probleme, bleiben

Hallo nochmal was neues zu meinem Prob. Wenn ich den gnomemixer starte fungiert der sound auf einmal. Abspielen mit xmms kann ich aber trotzdem nix. /etc/init.d/alsa start sagt
alsadriver is already running. Vieleicht weis ja jemand was. Auf der Slake hat das ganze fungiert.

Ich bin jetzt schon 2 Tage dran.

Das komische is auch ohne Eintrag in die /etc/modules.conf ist wenigstens xmms gelaufen, nachdem ich gamix aufgerufen und eingestellt hab. Der restliche sound ging auch. Das
Einstellen ging jedoch nur mit gamix. gmix ging erst nach der einstellung mit gamix.

Bin am verzweifeln.



### This file is automatically generated by update-modules"
#
# Please do not edit this file directly. If you want to change or add
# anything please take a look at the files in /etc/modutils and read
# the manpage for update-modules.
#
### update-modules: start processing /etc/modutils/0keep
# DO NOT MODIFY THIS FILE!
# This file is not marked as conffile to make sure if you upgrade modutils
# it will be restored in case some modifications have been made.
#
# The keep command is necessary to prevent insmod and friends from ignoring
# the builtin defaults of a path-statement is encountered. Until all other
# packages use the new `add path'-statement this keep-statement is essential
# to keep your system working
keep

### update-modules: end processing /etc/modutils/0keep

### update-modules: start processing /etc/modutils/actions
# Special actions that are needed for some modules

# The BTTV module does not load the tuner module automatically,
# so do that in here
post-install bttv insmod tuner
post-remove bttv rmmod tuner


### update-modules: end processing /etc/modutils/actions

### update-modules: start processing /etc/modutils/aliases
# Aliases to tell insmod/modprobe which modules to use

# Uncomment the network protocols you don't want loaded:
# alias net-pf-1 off # Unix
# alias net-pf-2 off # IPv4
# alias net-pf-3 off # Amateur Radio AX.25
# alias net-pf-4 off # IPX
# alias net-pf-5 off # DDP / appletalk
# alias net-pf-6 off # Amateur Radio NET/ROM
# alias net-pf-9 off # X.25
# alias net-pf-10 off # IPv6
# alias net-pf-11 off # ROSE / Amateur Radio X.25 PLP
# alias net-pf-19 off # Acorn Econet

alias char-major-10-175 agpgart
alias char-major-10-200 tun
alias char-major-81 bttv
alias char-major-108 ppp_generic
alias /dev/ppp ppp_generic
alias tty-ldisc-3 ppp_async
alias tty-ldisc-14 ppp_synctty
alias ppp-compress-21 bsd_comp
alias ppp-compress-24 ppp_deflate
alias ppp-compress-26 ppp_deflate

# Crypto modules (see http://www.kerneli.org/)
alias loop-xfer-gen-0 loop_gen
alias loop-xfer-3 loop_fish2
alias loop-xfer-gen-10 loop_gen
alias cipher-2 des
alias cipher-3 fish2
alias cipher-4 blowfish
alias cipher-6 idea
alias cipher-7 serp6f
alias cipher-8 mars6
alias cipher-11 rc62
alias cipher-15 dfc2
alias cipher-16 rijndael
alias cipher-17 rc5Hallo, hier erstmals auf diesem Weg meine Module.Hallo, hier erstmals auf diesem Weg meine Module.


### update-modules: end processing /etc/modutils/aliases

### update-modules: start processing /etc/modutils/alsa
# Alsa-Moduleintrag
# Stand 24.09.2002
# Meyerle Johannes
# Workstation
alias char-major-116 snd
alias char-major-14 soundcore
alias snd-card-0 snd-fm801

# Optionen für diesen Treiber fm801
options snd-fm801 snd_enable=1 snd_index=0
options snd snd_cards_limit=1 snd_major=116

alias sound-slot0 snd-card-0
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-11 snd-mixer-oss
alias sound-service-0-12 snd-pcm-oss

# Ende Alsa

### update-modules: end processing /etc/modutils/alsa

### update-modules: start processing /etc/modutils/alsa-path
# Debian ALSA modules path
# Do not edit this unless you understand what you're doing.
#path=/lib/modules/`uname -r`/alsa
# Die obige Zeile wurde von mir am 23.09.2002 auskommentiert !!!!!!!!!!!!!
#?????????????????????????????????????????????????????????????????????????

### update-modules: end processing /etc/modutils/alsa-path

### update-modules: start processing /etc/modutils/alsa-path.save
# Debian ALSA modules path
# Do not edit this unless you understand what you're doing.
path=/lib/modules/`uname -r`/alsa

### update-modules: end processing /etc/modutils/alsa-path.save

### update-modules: start processing /etc/modutils/paths
# This file contains a list of paths that modprobe should scan,
# beside the once that are compiled into the modutils tools
# themselves.


### update-modules: end processing /etc/modutils/paths

### update-modules: start processing /etc/modutils/ppp
alias /dev/ppp ppp_generic
alias char-major-108 ppp_generic
alias tty-ldisc-3 ppp_async
alias tty-ldisc-14 ppp_synctty
alias ppp-compress-21 bsd_comp
alias ppp-compress-24 ppp_deflate
alias ppp-compress-26 ppp_deflate

### update-modules: end processing /etc/modutils/ppp

### update-modules: start processing /etc/modutils/setserial
#
# This is what I wanted to do, but logger is in /usr/bin, which isn't loaded
# when the module is first loaded into the kernel at boot time!
#
#post-install serial /etc/init.d/setserial start | logger -p daemon.info -t "setserial-module reload"
#pre-remove serial /etc/init.d/setserial stop | logger -p daemon.info -t "setserial-module uload"
#
alias /dev/tts serial
alias /dev/tts/0 serial
alias /dev/tts/1 serial
alias /dev/tts/2 serial
alias /dev/tts/3 serial
post-install serial /etc/init.d/setserial modload > /dev/null 2> /dev/null
pre-remove serial /etc/init.d/setserial modsave > /dev/null 2> /dev/null

### update-modules: end processing /etc/modutils/setserial

### update-modules: start processing /etc/modutils/arch/i386
alias parport_lowlevel parport_pc
alias char-major-10-144 nvram
alias binfmt-0064 binfmt_aout
alias char-major-10-135 rtc

### update-modules: end processing /etc/modutils/arch/i386


Hier sind meine geladenen Module

Module Size Used by Not tainted
scanner 8480 0 (unused)
printer 7744 0 (unused)
snd-pcm-oss 36900 1
snd-mixer-oss 9504 0 [snd-pcm-oss]
snd-fm801 7780 1
snd-opl3-lib 5728 0 [snd-fm801]
snd-hwdep 3744 0 [snd-opl3-lib]
snd-pcm 59616 0 [snd-pcm-oss snd-fm801]
snd-timer 11456 0 [snd-opl3-lib snd-pcm]
snd-ac97-codec 24688 0 [snd-fm801]
snd-mpu401-uart 3008 0 [snd-fm801]
snd-rawmidi 13600 0 [snd-mpu401-uart]
snd-seq-device 3984 0 [snd-opl3-lib snd-rawmidi]
snd 27272 0 [snd-pcm-oss snd-mixer-oss snd-fm801 snd-opl3-lib snd-hwdep snd-pcm snd-timer snd-ac97-codec snd-mpu401-uart snd-rawmidi snd-seq-device]
smbfs 33504 0 (unused)
ntfs 50176 0 (unused)
keybdev 1696 0 (unused)

Hier sieht man wie ls aussieht

lrwxrwxrwx 1 root root 9 Sep 23 23:21 dsp -> /dev/dsp0
crwxrwxrwx 1 root audio 14, 3 Sep 23 23:21 dsp0
crw-rw---- 1 root audio 14, 19 Sep 23 23:21 dsp1
crw-rw---- 1 root audio 14, 35 Sep 23 23:21 dsp2
crw-rw---- 1 root audio 14, 51 Sep 23 23:21 dsp3

Hier nochmals eine ausgabe, die mich stört

Sep 24 22:33:13 workstation modprobe: modprobe: Can't locate module sound-slot-1
Sep 24 22:33:13 workstation modprobe: modprobe: Can't locate module sound-service-1-0

Warum sound-service slot-1

Hier nochmals die Ausgabe von lspci -v
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 735 Host (rev 01)
Flags: bus master, medium devsel, latency 32
Memory at d0000000 (32-bit, non-prefetchable)
Capabilities: [c0] AGP version 2.0

00:01.0 PCI bridge: Silicon Integrated Systems [SiS] 5591/5592 AGP (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: cfd00000-cfefffff
Prefetchable memory behind bridge: bfb00000-cfbfffff

00:02.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513
Flags: bus master, medium devsel, latency 0

00:02.2 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 07) (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems: Unknown device 0a14
Flags: bus master, medium devsel, latency 64, IRQ 5
Memory at cfffe000 (32-bit, non-prefetchable)

00:02.3 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 07) (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems: Unknown device 0a14
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at cffff000 (32-bit, non-prefetchable)

00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0) (prog-if 80 [Master])
Subsystem: Silicon Integrated Systems [SiS] SiS5513 EIDE Controller (A,B step)
Flags: bus master, fast devsel, latency 128
I/O ports at ff00

00:09.0 Multimedia audio controller: Fortemedia, Inc Xwave QS3000A [FM801] (rev b2)
Subsystem: Fortemedia, Inc: Unknown device 1319
Flags: bus master, medium devsel, latency 64, IRQ 5
I/O ports at d800
Capabilities: [dc] Power Management version 1

00:09.1 Input device controller: Fortemedia, Inc Xwave QS3000A [FM801 game port] (rev b2)
Subsystem: Fortemedia, Inc: Unknown device 1319
Flags: bus master, medium devsel, latency 64
I/O ports at dc00
Capabilities: [dc] Power Management version 1

00:0b.0 Ethernet controller: 3Com Corporation 3c905C-TX [Fast Etherlink] (rev 74)
Subsystem: 3Com Corporation 3C905C-TX Fast Etherlink for PC Management NIC
Flags: bus master, medium devsel, latency 64, IRQ 5
I/O ports at d400
Memory at cfffdf80 (32-bit, non-prefetchable)
Expansion ROM at cffc0000 [disabled]
Capabilities: [dc] Power Management version 2

00:0f.0 Multimedia video controller: Brooktree Corporation Bt878 (rev 11)
Subsystem: Hauppauge computer works Inc. WinTV/GO
Flags: bus master, medium devsel, latency 64, IRQ 5
Memory at cfcfe000 (32-bit, prefetchable)
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2

00:0f.1 Multimedia controller: Brooktree Corporation Bt878 (rev 11)
Subsystem: Hauppauge computer works Inc. WinTV/GO
Flags: bus master, medium devsel, latency 64, IRQ 5
Memory at cfcff000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2

01:00.0 VGA compatible controller: ATI Technologies Inc Radeon QD (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc: Unknown device 000a
Flags: bus master, stepping, 66Mhz, medium devsel, latency 64, IRQ 5
Memory at c0000000 (32-bit, prefetchable) [size=128M]
I/O ports at b800 [size=256]
Memory at cfe80000 (32-bit, non-prefetchable) [size=512K]
Expansion ROM at cfe60000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Capabilities: [50] Power Management version 2

[glatzor]

Hab jetzt rausgefunden, daß ich ful-duplex abstellen muß. Das mix dem alsamixer geht immer noch
nicht. Wenn ich die ful-duplexfähigkeit abstelle, kommt jetzt wenigstens was aus meinem Xmms.


Sep 24 22:33:13 workstation modprobe: modprobe: Can't locate module sound-slot-1
Sep 24 22:33:13 workstation modprobe: modprobe: Can't locate module sound-service-1-0

Du benutzt demnach KDE. KDE sucht beim Starten nach möglichen sound devices. Du kannst dies in der Mixer Einstellung im KDE-kontrollzentrum ändern, bzw. auf nur noch das erste device beschränken.

Lädst Du Deine Module durch /etc/modules? Wenn ja entferne sie dort und lade sie über "&etc/init.d/alsa start".

Geht der KMix?

[unitra]

Hi,

eine komfortable Methode um nachzugudcken welche Module geladen sind oder nicht,
um sie dann dann zu entfernen oder auch nicht ist als su oder root den befehl

Code: Alles auswählen

modconf 

bzw. modconfig oder auch config mod, eins von den dreien.

Ich hatte auch aenliche Probleme mit alsa, als ich mein rtcw mit sound spielen wollte.
Und was man nicht vergessen sollte, alsa ist von vornerein auf mute eingestellt, mann
muss im aumix, oder einem ähnlichem Program die Lautstärtke einstellen.

Vielleicht hilft dir das ein bischen.

unitra