ich habe hier ein kleines Problem mit meinen Audiokarten.
Das System ist ein aktuelles Testing mit XFCE und das Problem besteht darin, dass sich der PC die default Soundkarte nicht merkt und nach einem Reboot immer wieder auf die erste Karte zurück greift.
Die Einstellungen hätte ich dabei in
pavucontrol gemacht.Als kurze Info: Wegen der 2 eingebauten ICE1712 - M Audio Delta 1010LT habe ich
alsa-utils installiert um die Fader der Ausgänge mit alsamixer öffnen zu können.Nun zu den Ausgaben:
Code: Alles auswählen
~$ pactl list sinks short
42 alsa_output.pci-0000_07_00.0.analog-stereo PipeWire s32le 2ch 48000Hz IDLE
49 alsa_output.pci-0000_07_01.0.analog-stereo PipeWire s32le 2ch 48000Hz IDLE
51 alsa_output.pci-0000_0a_00.1.hdmi-stereo PipeWire s32le 2ch 48000Hz IDLE
52 alsa_output.pci-0000_0c_00.4.analog-stereo PipeWire s32le 2ch 48000Hz IDLE
49 alsa_output.pci-0000_07_01.0.analog-stereo PipeWire s32le 2ch 48000Hz IDLE gewünscht.
Leider wird immer wieder die
42 alsa_output.pci-0000_07_00.0.analog-stereo PipeWire s32le 2ch 48000Hz IDLE ausgewählt.
Code: Alles auswählen
~$ pactl list short | grep restore
~$Code: Alles auswählen
~$ pactl list short | grep detect
~$Code: Alles auswählen
~$ pulseaudio --check && echo "PA laeuft" || echo "PA laeuft nicht"
PA laeuft nicht
Code: Alles auswählen
~$ systemctl --user status pulseaudio.service
○ pulseaudio.service - Sound Service
Loaded: loaded (/usr/lib/systemd/user/pulseaudio.service; enabled; vendor preset: enabled)
Active: inactive (dead)
TriggeredBy: ○ pulseaudio.socket
Etwaige Versuche eine ~/.config/pulse/default.pa mit
Code: Alles auswählen
set-default-sink alsa_output.pci-0000_07_01.0.analog-stereoCode: Alles auswählen
~$ cat ~/.config/pulse/default.pa
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)
.fail
### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties
### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available
### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
#load-module module-null-sink
#load-module module-pipe-sink
### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev support)
load-module module-detect
.endif
### Automatically connect sink and source if JACK server is present
.ifexists module-jackdbus-detect.so
.nofail
load-module module-jackdbus-detect channels=2
.fail
.endif
### Automatically load driver modules for Bluetooth hardware
.ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
.endif
.ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
.endif
### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish
### Load the RTP receiver module (also configured via paprefs, see above)
#load-module module-rtp-recv
### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
#load-module module-rtp-send source=rtp.monitor
### Load additional modules from GSettings. This can be configured with the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict with manually
### loaded modules.
.ifexists module-gsettings.so
.nofail
load-module module-gsettings
.fail
.endif
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Honour intended role device property
load-module module-intended-roles
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
.ifexists module-console-kit.so
load-module module-console-kit
.endif
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif
### Enable positioned event sounds
load-module module-position-event-sounds
### Cork music/video streams when a phone stream is active
load-module module-role-cork
### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply
### Make some devices default
set-default-sink alsa_output.pci-0000_07_01.0.analog-stereo
#set-default-source input
### Allow including a default.pa.d directory, which if present, can be used
### for additional configuration snippets.
.nofail
.include /etc/pulse/default.pa.d
Code: Alles auswählen
~$ pactl get-default-sink
alsa_output.pci-0000_07_00.0.analog-stereo
~$ pactl set-default-sink alsa_output.pci-0000_07_01.0.analog-stereo
~$ pactl get-default-sink
alsa_output.pci-0000_07_01.0.analog-stereo
~$ pactl set-default-sink alsa_output.pci-0000_07_00.0.analog-stereo
~$ pactl get-default-sink
alsa_output.pci-0000_07_00.0.analog-stereoWeiß jemand Hilfe?
Danke im Voraus!
Ist das beabsichtigt ?
