E: Read error - read (5 Input/output error)

Hast Du Probleme mit Hardware, die durch die anderen Foren nicht abgedeckt werden? Schau auch in den "Tipps und Tricks"-Bereich.
Antworten
Benutzeravatar
mistersixt
Beiträge: 6601
Registriert: 24.09.2003 14:33:25
Lizenz eigener Beiträge: GNU Free Documentation License

E: Read error - read (5 Input/output error)

Beitrag von mistersixt » 12.02.2004 08:02:04

Moin moin,

hat einer schon mal sowas hier gesehen?

Code: Alles auswählen

mars:~# apt-get dist-upgrade
Reading Package Lists... Done
Building Dependency Tree... Done
Calculating Upgrade... Done
The following NEW packages will be installed:
  kernel-image-2.4.24-1-k7
The following packages will be upgraded:
  cvs debconf debconf-i18n debconf-utils intltool-debian kernel-image-2.4-k7 ksensors libaudio-dev libaudio2
  libcupsys2 libcupsys2-dev libgimpprint1 libsnmp-base libsnmp5 libusb-0.1-4 man-db mozilla-thunderbird reportbug snmp
  ssh
20 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
E: Read error - read (5 Input/output error)
E: Read error - read (5 Input/output error)
E: Read error - read (5 Input/output error)
E: Read error - read (5 Input/output error)
E: Read error - read (5 Input/output error)
E: Read error - read (5 Input/output error)
E: Read error - read (5 Input/output error)
E: Read error - read (5 Input/output error)
E: Read error - read (5 Input/output error)
E: Read error - read (5 Input/output error)
E: Read error - read (5 Input/output error)
E: Read error - read (5 Input/output error)
E: Read error - read (5 Input/output error)
E: Read error - read (5 Input/output error)
E: Read error - read (5 Input/output error)
E: Read error - read (5 Input/output error)
E: Read error - read (5 Input/output error)
mars:~# 

Und gleichzeitig kommt in dmesg:

Code: Alles auswählen

attempt to access beyond end of device
hda2: rw=0, want=14653531016, limit=158834655
attempt to access beyond end of device
hda2: rw=0, want=14915064784, limit=158834655
attempt to access beyond end of device
hda2: rw=0, want=15624541056, limit=158834655
attempt to access beyond end of device
hda2: rw=0, want=13070715752, limit=158834655
attempt to access beyond end of device
hda2: rw=0, want=6065582496, limit=158834655
attempt to access beyond end of device
hda2: rw=0, want=9132132752, limit=158834655
attempt to access beyond end of device
hda2: rw=0, want=8219869448, limit=158834655
attempt to access beyond end of device
hda2: rw=0, want=13617034064, limit=158834655
Sonst läuft mein System einwandfrei - bis jetzt. Ich kann Daten hin und herschaufeln, geht alles. Kernel-2.6.2 ist installiert. Mit oder ohne DMA treten die Fehler auf. fsck sagt, die Platte ist "clean". Jemand eine Idee?


Gruss, mistersixt.

Benutzeravatar
mistersixt
Beiträge: 6601
Registriert: 24.09.2003 14:33:25
Lizenz eigener Beiträge: GNU Free Documentation License

Beitrag von mistersixt » 12.02.2004 08:27:02

Na ja, vielleicht ist das doch eher ein Hardware-Problem, jetzt gibt es andauernd ide resets und DMA errors, ich vermute, da ist was kaputto :( ! Schnell mal die Daten sichern ...

mistersixt.

Antworten