Debian Stretch 9 amd64 Multiboot kein Internet

[WindowsProfi30Jahre]

Hallo,

ich habe hier auf einem Multiboot System Debian Jessie 8.6 und Debian Stretch 9 und andere Linux Systeme
installiert, nur bei Debian Stretch bekomme ich einfach keinen Internetzugang, bei allen anderen
Linux Distro funktioniert der Internetzugang auf dem gleichen Rechner, gleiche Festplatte, problemlos.

Wie kann man solche Probleme grundsätzlich einfach und schnell lösen ?

Ich kann hier auch unter den Netzwerkeinstellungen keine Änderungen durchführen, merkwürdig.

Code: Alles auswählen

 root@Debian9Stretch:/home/guenter# ifconfig
lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1  (Lokale Schleife)
        RX packets 1191  bytes 96107 (93.8 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 1191  bytes 96107 (93.8 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

root@Debian9Stretch:/home/guenter# 


guenter@Debian9Stretch:~$ su
Passwort: 
root@Debian9Stretch:/home/guenter# dmesg
[    0.000000] Linux version 4.7.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 5.4.1 20160904 (Debian 5.4.1-2) ) #1 SMP Debian 4.7.6-1 (2016-10-07)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.7.0-1-amd64 root=UUID=ba9d0801-c62f-4d6a-b638-374d472f72fb ro quiet
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e7000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7eaffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c7eb0000-0x00000000c7ebffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000c7ec0000-0x00000000c7eeffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000c7ef0000-0x00000000c7efffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000237ffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./A770DE+, BIOS P1.70 09/07/2010
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x238000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFF8000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000238000000 aka 9088M
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: update [mem 0xc8000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xc7eb0 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x25b56000, 0x25b56fff] PGTABLE
[    0.000000] BRK [0x25b57000, 0x25b57fff] PGTABLE
[    0.000000] BRK [0x25b58000, 0x25b58fff] PGTABLE
[    0.000000] BRK [0x25b59000, 0x25b59fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35d34000-0x36e91fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FB040 000014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 0x00000000C7EB0000 000044 (v01 090710 RSDT2113 20100907 MSFT 00000097)
[    0.000000] ACPI: FACP 0x00000000C7EB0200 000084 (v02 A_M_I  OEMFACP  12000601 MSFT 00000097)
[    0.000000] ACPI: DSDT 0x00000000C7EB0450 0089A0 (v01 AS229  AS229162 00000162 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000C7EC0000 000040
[    0.000000] ACPI: APIC 0x00000000C7EB0390 00007C (v01 090710 APIC2113 20100907 MSFT 00000097)
[    0.000000] ACPI: MCFG 0x00000000C7EB0410 00003C (v01 090710 OEMMCFG  20100907 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x00000000C7EC0040 000071 (v01 090710 OEMB2113 20100907 MSFT 00000097)
[    0.000000] ACPI: SRAT 0x00000000C7EB8DF0 0000E8 (v03 AMD    FAM_F_10 00000002 AMD  00000001)
[    0.000000] ACPI: AAFT 0x00000000C7EB8EE0 000027 (v01 090710 OEMAAFT  20100907 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000C7EB8F10 000038 (v01 090710 OEMHPET  20100907 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000C7EB8F50 00088C (v01 A M I  POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xc7ffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x237ffffff]
[    0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xc7ffffff] -> [mem 0x00000000-0xc7ffffff]
[    0.000000] NUMA: Node 0 [mem 0x00000000-0xc7ffffff] + [mem 0x100000000-0x237ffffff] -> [mem 0x00000000-0x237ffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x237ff9000-0x237ffdfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x0000000237ffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000c7eaffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x0000000237ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000237ffffff]
[    0.000000] On node 0 totalpages: 2096718
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12731 pages used for memmap
[    0.000000]   DMA32 zone: 814768 pages, LIFO batch:31
[    0.000000]   Normal zone: 19968 pages used for memmap
[    0.000000]   Normal zone: 1277952 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[    0.000000] smpboot: Allowing 6 CPUs, 2 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e6fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e7000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc7eb0000-0xc7ebffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc7ec0000-0xc7eeffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc7ef0000-0xc7efffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc7f00000-0xffefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
[    0.000000] e820: [mem 0xc7f00000-0xffefffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:6 nr_node_ids:1
[    0.000000] percpu: Embedded 33 pages/cpu @ffff880237c00000 s98264 r8192 d28712 u262144
[    0.000000] pcpu-alloc: s98264 r8192 d28712 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - - 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2063934
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.7.0-1-amd64 root=UUID=ba9d0801-c62f-4d6a-b638-374d472f72fb ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0x4024000000-0x4025ffffff] (32MB)
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] AGP: Your BIOS doesn't leave an aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM
[    0.000000] AGP: Mapping aperture over RAM [mem 0xbc000000-0xbfffffff] (65536KB)
[    0.000000] PM: Registered nosave memory: [mem 0xbc000000-0xbfffffff]
[    0.000000] Memory: 8091596K/8386872K available (6015K kernel code, 1099K rwdata, 2788K rodata, 1352K init, 928K bss, 295276K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=6.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[    0.000000] NR_IRQS:33024 nr_irqs:472 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3718.677 MHz processor
[    0.000017] Calibrating delay loop (skipped), value calculated using timer frequency.. 7437.35 BogoMIPS (lpj=14874708)
[    0.000019] pid_max: default: 32768 minimum: 301
[    0.000032] ACPI: Core revision 20160422
[    0.002764] ACPI: 2 ACPI AML tables successfully acquired and loaded

[    0.002810] Security Framework initialized
[    0.002811] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.002817] AppArmor: AppArmor disabled by boot time parameter
[    0.003144] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.005462] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.006577] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.006584] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.006870] CPU: Physical Processor ID: 0
[    0.006871] CPU: Processor Core ID: 0
[    0.006873] mce: CPU supports 6 MCE banks
[    0.006878] LVT offset 0 assigned for vector 0xf9
[    0.006883] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[    0.006884] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
[    0.007079] Freeing SMP alternatives memory: 24K (ffffffffa5a66000 - ffffffffa5a6c000)
[    0.015592] ftrace: allocating 24703 entries in 97 pages
[    0.021236] smpboot: Max logical packages: 2
[    0.021238] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.021591] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.166513] smpboot: CPU0: AMD Phenom(tm) II X4 980 Processor (family: 0x10, model: 0x4, stepping: 0x3)
[    0.166516] Performance Events: AMD PMU driver.
[    0.166519] ... version:                0
[    0.166520] ... bit width:              48
[    0.166520] ... generic registers:      4
[    0.166521] ... value mask:             0000ffffffffffff
[    0.166522] ... max period:             00007fffffffffff
[    0.166522] ... fixed-purpose events:   0
[    0.166523] ... event mask:             000000000000000f
[    0.166932] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.167028] x86: Booting SMP configuration:
[    0.167030] .... node  #0, CPUs:      #1 #2 #3
[    0.408569] x86: Booted up 1 node, 4 CPUs
[    0.408571] smpboot: Total of 4 processors activated (29748.39 BogoMIPS)
[    0.422650] devtmpfs: initialized
[    0.422718] x86/mm: Memory block size: 128MB
[    0.432629] PM: Registering ACPI NVS region [mem 0xc7ec0000-0xc7eeffff] (196608 bytes)
[    0.432697] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.444573] pinctrl core: initialized pinctrl subsystem
[    0.456660] NET: Registered protocol family 16
[    0.468550] cpuidle: using governor ladder
[    0.480552] cpuidle: using governor menu
[    0.480560] node 0 link 0: io port [1000, ffffff]
[    0.480563] TOM: 00000000c8000000 aka 3200M
[    0.480565] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[    0.480567] node 0 link 0: mmio [e0000000, efffffff] ==> none
[    0.480569] node 0 link 0: mmio [f0000000, ffffffff]
[    0.480571] node 0 link 0: mmio [a0000, bffff]
[    0.480572] node 0 link 0: mmio [c8000000, dfffffff]
[    0.480573] TOM2: 0000000238000000 aka 9088M
[    0.480574] bus: [bus 00-07] on node 0 link 0
[    0.480575] bus: 00 [io  0x0000-0xffff]
[    0.480576] bus: 00 [mem 0xf0000000-0xffffffff]
[    0.480577] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.480577] bus: 00 [mem 0xc8000000-0xdfffffff]
[    0.480578] bus: 00 [mem 0x238000000-0xfcffffffff]
[    0.480637] ACPI: bus type PCI registered
[    0.480639] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.504615] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.504618] PCI: not using MMCONFIG
[    0.504619] PCI: Using configuration type 1 for base access
[    0.504619] PCI: Using configuration type 1 for extended access
[    0.504833] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.504834] mtrr: probably your BIOS does not setup all CPUs.
[    0.504834] mtrr: corrected configuration.
[    0.516737] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    0.516740] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.550588] ACPI: Added _OSI(Module Device)
[    0.550591] ACPI: Added _OSI(Processor Device)
[    0.550592] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.550593] ACPI: Added _OSI(Processor Aggregator Device)
[    0.550889] ACPI: Executed 5 blocks of module-level executable AML code
[    0.553326] ACPI: Interpreter enabled
[    0.553342] ACPI: (supports S0 S1 S4 S5)
[    0.553343] ACPI: Using IOAPIC for interrupt routing
[    0.553365] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.553830] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.553840] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.557318] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.557323] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.557473] acpi PNP0A03:00: _OSC: platform does not support [PCIeHotplug PME]
[    0.557615] acpi PNP0A03:00: _OSC: OS now controls [AER PCIeCapability]
[    0.557673] acpi PNP0A03:00: ignoring host bridge window [mem 0x000d0000-0x000dffff window] (conflicts with Adapter ROM [mem 0x000cf800-0x000d13ff])
[    0.557813] PCI host bridge to bus 0000:00
[    0.557815] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.557816] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.557817] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.557819] pci_bus 0000:00: root bus resource [mem 0xc7f00000-0xdfffffff window]
[    0.557820] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
[    0.557822] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.557830] pci 0000:00:00.0: [1002:5957] type 00 class 0x060000
[    0.557840] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size)
[    0.557920] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
[    0.557954] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold

guenter@Debian9Stretch:~$ lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD/ATI] RX780/RX790 Host Bridge
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RX780/RD790 PCI to PCI bridge (external gfx0 port A)
00:0a.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD790 PCI to PCI bridge (PCI express gpp port F)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 3c)
00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 IDE Controller
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03)
02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV710 [Radeon HD 4350/4550]
02:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] RV710/730 HDMI Audio [Radeon HD 4000 series]
guenter@Debian9Stretch:~$ 


root@Debian9Stretch:/home/guenter# 
root@Debian9Stretch:/home/guenter#     Die Website könnte vorübergehend nicht erreichbar sein, versuchen Sie es bitte später nochmals.
bash: Die: Kommando nicht gefunden.
root@Debian9Stretch:/home/guenter#     Wenn Sie auch keine andere Website aufrufen können, überprüfen Sie bitte die Netzwerk-/Internetverbindung.
bash: Wenn: Kommando nicht gefunden.
root@Debian9Stretch:/home/guenter#     Wenn Ihr Computer oder Netzwerk von einer Firewall oder einem Proxy geschützt wird, stellen Sie bitte sicher, dass Firefox auf das Internet zugreifen darf.ping ^C
root@Debian9Stretch:/home/guenter# ping 192.168.178.1
connect: Das Netzwerk ist nicht erreichbar
root@Debian9Stretch:/home/guenter# ping fritz.bx
ping: fritz.bx: Der Name oder der Dienst ist nicht bekannt
root@Debian9Stretch:/home/guenter# ping fritz.box
ping: fritz.box: Der Name oder der Dienst ist nicht bekannt
root@Debian9Stretch:/home/guenter# ping 169.254.1.1
connect: Das Netzwerk ist nicht erreichbar
root@Debian9Stretch:/home/guenter#   

Tschüss

WindowsProfi30Jahre

[jph]

Wie hast du das Netzwerk konfiguriert? Klassisch? NetworkManager? systemd-networkd? Was bedeutet "kein Internet"?

[WindowsProfi30Jahre]

Hallo,

konfiguriert habe ich da gar nichts, dass geht ja automatisch bei der Installation, ich kann leider hier keine Änderung der Einstellungen und Debian Stretch 9 vornehmen, auch wenn ich mittels
192.168.178.1 oder 169.254.1.1 oder fritz.box versuche auf die 3370 mich einzuloggen, keine Chance. Wie gesagt, unter den anderen Linux Distros funktioniert das Ganze auf der gleichen Hardware
problemlos. Das verstehe ich irgendwie nicht.

Natürlich habe ich die FritzBox auch schon neugestartet.

Tschüss

WindowsProfi30Jahre

[rendegast]

Das dmesg ist zu kurz, keine Meldung zu eth*/enp*/r816*.

Modul geladen? r816*
Vielleicht Modul-Konflikt r8169 (kernel) <-> r8168 (3rd-party, intel)?

Netzwerk nicht konfiguriert, aber dennoch vorhanden?

Code: Alles auswählen

ifconfig
<->
ifconfig -a

resp. 
ip l
ip a

<-> gegebenenfalls neuer Schnittstellen-Name ethX -> enpYYYY

# ping 192.168.178.1
connect: Das Netzwerk ist nicht erreichbar
...

Wo kein Netz, da kein Ping.

[TomL]

Die folgenden Befehle zeigen dir den Zustand an:

Welches Kernelmodul?

Code: Alles auswählen

# lspci -nnk | grep net -i -A 2
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
	Subsystem: Gigabyte Technology Co., Ltd Onboard Ethernet [1458:e000]
	Kernel driver in use: r8169
	Kernel modules: r8169

Kernelmodul geladen?

Code: Alles auswählen

# journalctl -b | grep firmware -i
Mär 04 14:29:11 thomaspc kernel: r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-3.fw

NIC geöffnet und verbunden? Zweimal "UP bedeutet geöffnet und verbunden

Code: Alles auswählen

# ip a
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 44:dd:55:aa:77:11 brd ff:ff:ff:ff:ff:ff

Wobei das NIC unter D9 vermutlich nicht mehr 'eth0' heissen wird, sondern aufgrund der neuen Regel in Systemd bezüglich "Predictable Network Interface Names” irgendwie anders... aber das sieht man mit "ip a".

[schwedenmann]

Hallo


Mach mal ein
ip addr show

poste mal die /etc/network/interfaces

auch lsmod wäre net

mfg
schwedenmann

[WindowsProfi30Jahre]

Hallo,

irgendwie habe ich hier ständig Probleme mit der Erkennung meiner Netzwerkkarte, ich nutze ein Asrock A770DE+ mit Onboard Netzwerkkarte von Realtek PCIE x1 Gigabit LAN 10/100/1000 Mb/s
- Realtek RTL8111DL laut Asrock, bei der Installation von Debian Stretch 9 hatte ich noch die PCI Netzwerkkarte Realtek 8169 eingesteckt, diese habe ich zwischenzeitlich aus allen Rechnern verbannt
und nutze nur noch jeweils die Onboard Netzwerkkarte, diese ist eine RTL8111.

Hier vermute ich das Problem. In dem nachfolgenden Beitrag hatte ich das auch schon mal thematisiert, eine richtige optimale Lösung für das
Problem habe ich aber bis heute nicht.

viewtopic.php?f=30&p=1055986

Anscheinend kann Debian schon während der Installation die Netzwerkkarte nicht korrekt erkennen bzw. den richtigen Treiber zuordnen.

Tschüss

WindowsProfi30Jahre

[schwedenmann]

Hallo

Anscheinend kann Debian schon während der Installation die Netzwerkkarte nicht korrekt erkennen bzw. den richtigen Treiber zuordnen.

Dann poste mal die Ausgaben um die ich dich gebeten habe, incl. die Ausgabe von uname -a

mfg
schwedenmann

[Teddybear]

https://unixblogger.com/2016/08/11/how- ... ted-guide/

[WindowsProfi30Jahre]

Hallo,

als Netzwerk habe ich unter mehreren Windows 7 und 10 Rechnern ein privates eingerichtet mit Workgroup usw. welches auch einigermassen als Gigabit Netzwerk funktioniert.

Code: Alles auswählen

  guenter@Debian9Stretch:~$ lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD/ATI] RX780/RX790 Host Bridge
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RX780/RD790 PCI to PCI bridge (external gfx0 port A)
00:0a.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD790 PCI to PCI bridge (PCI express gpp port F)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 3c)
00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 IDE Controller
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03)
02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV710 [Radeon HD 4350/4550]
02:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] RV710/730 HDMI Audio [Radeon HD 4000 series]
guenter@Debian9Stretch:~$ 



guenter@Debian9Stretch:~$ su
Passwort: 
root@Debian9Stretch:/home/guenter# ifconfig
lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1  (Lokale Schleife)
        RX packets 729  bytes 58705 (57.3 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 729  bytes 58705 (57.3 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

root@Debian9Stretch:/home/guenter# ifconfig -a
lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1  (Lokale Schleife)
        RX packets 729  bytes 58705 (57.3 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 729  bytes 58705 (57.3 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
  

[TomL]

Versuchs doch bitte mal mit den Ausgaben, um die Du gebeten wurdest, einfache Wiederholungen sind nicht hilfreich.

[WindowsProfi30Jahre]

Code: Alles auswählen

 root@Debian9Stretch:/home/guenter# resp.
bash: resp.: Kommando nicht gefunden.
root@Debian9Stretch:/home/guenter# ip l
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
root@Debian9Stretch:/home/guenter# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
root@Debian9Stretch:/home/guenter# ip l.
Object "l." is unknown, try "ip help".
root@Debian9Stretch:/home/guenter# ping 192.168.178.1
connect: Das Netzwerk ist nicht erreichbar
root@Debian9Stretch:/home/guenter# 
root@Debian9Stretch:/home/guenter# dmesg
[    0.000000] Linux version 4.7.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 5.4.1 20160904 (Debian 5.4.1-2) ) #1 SMP Debian 4.7.6-1 (2016-10-07)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.7.0-1-amd64 root=UUID=ba9d0801-c62f-4d6a-b638-374d472f72fb ro quiet
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e7000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7eaffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c7eb0000-0x00000000c7ebffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000c7ec0000-0x00000000c7eeffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000c7ef0000-0x00000000c7efffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000237ffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./A770DE+, BIOS P1.70 09/07/2010
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x238000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFF8000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000238000000 aka 9088M
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: update [mem 0xc8000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xc7eb0 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x19b56000, 0x19b56fff] PGTABLE
[    0.000000] BRK [0x19b57000, 0x19b57fff] PGTABLE
[    0.000000] BRK [0x19b58000, 0x19b58fff] PGTABLE
[    0.000000] BRK [0x19b59000, 0x19b59fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35d34000-0x36e91fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FB040 000014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 0x00000000C7EB0000 000044 (v01 090710 RSDT2113 20100907 MSFT 00000097)
[    0.000000] ACPI: FACP 0x00000000C7EB0200 000084 (v02 A_M_I  OEMFACP  12000601 MSFT 00000097)
[    0.000000] ACPI: DSDT 0x00000000C7EB0450 0089A0 (v01 AS229  AS229162 00000162 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000C7EC0000 000040
[    0.000000] ACPI: APIC 0x00000000C7EB0390 00007C (v01 090710 APIC2113 20100907 MSFT 00000097)
[    0.000000] ACPI: MCFG 0x00000000C7EB0410 00003C (v01 090710 OEMMCFG  20100907 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x00000000C7EC0040 000071 (v01 090710 OEMB2113 20100907 MSFT 00000097)
[    0.000000] ACPI: SRAT 0x00000000C7EB8DF0 0000E8 (v03 AMD    FAM_F_10 00000002 AMD  00000001)
[    0.000000] ACPI: AAFT 0x00000000C7EB8EE0 000027 (v01 090710 OEMAAFT  20100907 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000C7EB8F10 000038 (v01 090710 OEMHPET  20100907 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000C7EB8F50 00088C (v01 A M I  POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xc7ffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x237ffffff]
[    0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xc7ffffff] -> [mem 0x00000000-0xc7ffffff]
[    0.000000] NUMA: Node 0 [mem 0x00000000-0xc7ffffff] + [mem 0x100000000-0x237ffffff] -> [mem 0x00000000-0x237ffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x237ff9000-0x237ffdfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x0000000237ffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000c7eaffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x0000000237ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000237ffffff]
[    0.000000] On node 0 totalpages: 2096718
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12731 pages used for memmap
[    0.000000]   DMA32 zone: 814768 pages, LIFO batch:31
[    0.000000]   Normal zone: 19968 pages used for memmap
[    0.000000]   Normal zone: 1277952 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[    0.000000] smpboot: Allowing 6 CPUs, 2 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e6fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e7000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc7eb0000-0xc7ebffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc7ec0000-0xc7eeffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc7ef0000-0xc7efffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc7f00000-0xffefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
[    0.000000] e820: [mem 0xc7f00000-0xffefffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:6 nr_node_ids:1
[    0.000000] percpu: Embedded 33 pages/cpu @ffff880237c00000 s98264 r8192 d28712 u262144
[    0.000000] pcpu-alloc: s98264 r8192 d28712 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - - 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2063934
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.7.0-1-amd64 root=UUID=ba9d0801-c62f-4d6a-b638-374d472f72fb ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0xbc000000-0xbdffffff] (32MB)
[    0.000000] Aperture pointing to e820 RAM. Ignoring.
[    0.000000] AGP: Your BIOS doesn't leave an aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM
[    0.000000] AGP: Mapping aperture over RAM [mem 0xbc000000-0xbfffffff] (65536KB)
[    0.000000] PM: Registered nosave memory: [mem 0xbc000000-0xbfffffff]
[    0.000000] Memory: 8091596K/8386872K available (6015K kernel code, 1099K rwdata, 2788K rodata, 1352K init, 928K bss, 295276K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=6.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[    0.000000] NR_IRQS:33024 nr_irqs:472 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3718.444 MHz processor
[    0.000017] Calibrating delay loop (skipped), value calculated using timer frequency.. 7436.88 BogoMIPS (lpj=14873776)
[    0.000019] pid_max: default: 32768 minimum: 301
[    0.000032] ACPI: Core revision 20160422
[    0.002767] ACPI: 2 ACPI AML tables successfully acquired and loaded

[    0.002813] Security Framework initialized
[    0.002814] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.002820] AppArmor: AppArmor disabled by boot time parameter
[    0.003154] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.005483] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.006590] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.006598] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.006885] CPU: Physical Processor ID: 0
[    0.006886] CPU: Processor Core ID: 0
[    0.006888] mce: CPU supports 6 MCE banks
[    0.006893] LVT offset 0 assigned for vector 0xf9
[    0.006898] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[    0.006899] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
[    0.007093] Freeing SMP alternatives memory: 24K (ffffffff99a66000 - ffffffff99a6c000)
[    0.015616] ftrace: allocating 24703 entries in 97 pages
[    0.021258] smpboot: Max logical packages: 2
[    0.021260] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.021614] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.166524] smpboot: CPU0: AMD Phenom(tm) II X4 980 Processor (family: 0x10, model: 0x4, stepping: 0x3)
[    0.166527] Performance Events: AMD PMU driver.
[    0.166531] ... version:                0
[    0.166531] ... bit width:              48
[    0.166532] ... generic registers:      4
[    0.166533] ... value mask:             0000ffffffffffff
[    0.166533] ... max period:             00007fffffffffff
[    0.166534] ... fixed-purpose events:   0
[    0.166535] ... event mask:             000000000000000f
[    0.166942] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.167038] x86: Booting SMP configuration:
[    0.167039] .... node  #0, CPUs:      #1 #2 #3
[    0.408596] x86: Booted up 1 node, 4 CPUs
[    0.408598] smpboot: Total of 4 processors activated (29747.88 BogoMIPS)
[    0.422679] devtmpfs: initialized
[    0.422746] x86/mm: Memory block size: 128MB
[    0.436667] PM: Registering ACPI NVS region [mem 0xc7ec0000-0xc7eeffff] (196608 bytes)
[    0.436738] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.448595] pinctrl core: initialized pinctrl subsystem
[    0.460687] NET: Registered protocol family 16
[    0.472585] cpuidle: using governor ladder
[    0.484582] cpuidle: using governor menu
[    0.484590] node 0 link 0: io port [1000, ffffff]
[    0.484592] TOM: 00000000c8000000 aka 3200M
[    0.484594] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[    0.484597] node 0 link 0: mmio [e0000000, efffffff] ==> none
[    0.484599] node 0 link 0: mmio [f0000000, ffffffff]
[    0.484600] node 0 link 0: mmio [a0000, bffff]
[    0.484602] node 0 link 0: mmio [c8000000, dfffffff]
[    0.484603] TOM2: 0000000238000000 aka 9088M
[    0.484604] bus: [bus 00-07] on node 0 link 0
[    0.484605] bus: 00 [io  0x0000-0xffff]
[    0.484606] bus: 00 [mem 0xf0000000-0xffffffff]
[    0.484606] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.484607] bus: 00 [mem 0xc8000000-0xdfffffff]
[    0.484608] bus: 00 [mem 0x238000000-0xfcffffffff]
[    0.484667] ACPI: bus type PCI registered
[    0.484669] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.508644] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.508647] PCI: not using MMCONFIG
[    0.508648] PCI: Using configuration type 1 for base access
[    0.508648] PCI: Using configuration type 1 for extended access
[    0.508862] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.508862] mtrr: probably your BIOS does not setup all CPUs.
[    0.508863] mtrr: corrected configuration.
[    0.520784] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    0.520787] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.556651] ACPI: Added _OSI(Module Device)
[    0.556653] ACPI: Added _OSI(Processor Device)
[    0.556653] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.556654] ACPI: Added _OSI(Processor Aggregator Device)
[    0.556949] ACPI: Executed 5 blocks of module-level executable AML code
[    0.559343] ACPI: Interpreter enabled
[    0.559359] ACPI: (supports S0 S1 S4 S5)
[    0.559360] ACPI: Using IOAPIC for interrupt routing
[    0.559382] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.559841] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.559851] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.563287] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.563292] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.563442] acpi PNP0A03:00: _OSC: platform does not support [PCIeHotplug PME]
[    0.563583] acpi PNP0A03:00: _OSC: OS now controls [AER PCIeCapability]
[    0.563641] acpi PNP0A03:00: ignoring host bridge window [mem 0x000d0000-0x000dffff window] (conflicts with Adapter ROM [mem 0x000cf800-0x000d13ff])
[    0.563779] PCI host bridge to bus 0000:00
[    0.563781] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.563782] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.563784] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.563785] pci_bus 0000:00: root bus resource [mem 0xc7f00000-0xdfffffff window]
[    0.563787] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
[    0.563788] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.563796] pci 0000:00:00.0: [1002:5957] type 00 class 0x060000
[    0.563807] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size)
[    0.563887] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
[    0.563921] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.563954] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.563992] pci 0000:00:0a.0: [1002:597f] type 01 class 0x060400
[    0.564024] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[    0.564054] pci 0000:00:0a.0: System wakeup disabled by ACPI
[    0.564096] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[    0.564114] pci 0000:00:11.0: reg 0x10: [io  0xc000-0xc007]
[    0.564123] pci 0000:00:11.0: reg 0x14: [io  0xb000-0xb003]
[    0.564132] pci 0000:00:11.0: reg 0x18: [io  0xa000-0xa007]
[    0.564141] pci 0000:00:11.0: reg 0x1c: [io  0x9000-0x9003]
[    0.564150] pci 0000:00:11.0: reg 0x20: [io  0x8000-0x800f]
[    0.564159] pci 0000:00:11.0: reg 0x24: [mem 0xfe9ff800-0xfe9ffbff]
[    0.564261] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.564274] pci 0000:00:12.0: reg 0x10: [mem 0xfe9fe000-0xfe9fefff]
[    0.564360] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.564390] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
[    0.564403] pci 0000:00:12.1: reg 0x10: [mem 0xfe9fd000-0xfe9fdfff]
[    0.564488] pci 0000:00:12.1: System wakeup disabled by ACPI
[    0.564521] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.564537] pci 0000:00:12.2: reg 0x10: [mem 0xfe9ff000-0xfe9ff0ff]
[    0.564624] pci 0000:00:12.2: supports D1 D2
[    0.564625] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.564657] pci 0000:00:12.2: System wakeup disabled by ACPI
[    0.564693] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    0.564706] pci 0000:00:13.0: reg 0x10: [mem 0xfe9fc000-0xfe9fcfff]
[    0.564791] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.564821] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
[    0.564834] pci 0000:00:13.1: reg 0x10: [mem 0xfe9f7000-0xfe9f7fff]
[    0.564919] pci 0000:00:13.1: System wakeup disabled by ACPI
[    0.564952] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    0.564968] pci 0000:00:13.2: reg 0x10: [mem 0xfe9f6800-0xfe9f68ff]
[    0.565048] pci 0000:00:13.2: supports D1 D2
[    0.565049] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.565081] pci 0000:00:13.2: System wakeup disabled by ACPI
[    0.565120] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.565258] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[    0.565273] pci 0000:00:14.1: reg 0x10: [io  0x0000-0x0007]
[    0.565282] pci 0000:00:14.1: reg 0x14: [io  0x0000-0x0003]
[    0.565291] pci 0000:00:14.1: reg 0x18: [io  0x0000-0x0007]
[    0.565300] pci 0000:00:14.1: reg 0x1c: [io  0x0000-0x0003]
[    0.565309] pci 0000:00:14.1: reg 0x20: [io  0xff00-0xff0f]
[    0.565329] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.565330] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.565331] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.565332] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.565411] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.565431] pci 0000:00:14.2: reg 0x10: [mem 0xfe9f0000-0xfe9f3fff 64bit]
[    0.565497] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.565529] pci 0000:00:14.2: System wakeup disabled by ACPI
[    0.565558] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.565678] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.565741] pci 0000:00:14.4: System wakeup disabled by ACPI
[    0.565771] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[    0.565784] pci 0000:00:14.5: reg 0x10: [mem 0xfe9f5000-0xfe9f5fff]
[    0.565868] pci 0000:00:14.5: System wakeup disabled by ACPI
[    0.565900] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.565957] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.566010] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.566064] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.566120] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.566215] pci 0000:02:00.0: [1002:954f] type 00 class 0x030000
[    0.566229] pci 0000:02:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.566238] pci 0000:02:00.0: reg 0x18: [mem 0xfebf0000-0xfebfffff 64bit]
[    0.566245] pci 0000:02:00.0: reg 0x20: [io  0xe000-0xe0ff]
[    0.566257] pci 0000:02:00.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref]
[    0.566288] pci 0000:02:00.0: supports D1 D2
[    0.566324] pci 0000:02:00.1: [1002:aa38] type 00 class 0x040300
[    0.566338] pci 0000:02:00.1: reg 0x10: [mem 0xfebec000-0xfebeffff 64bit]
[    0.566395] pci 0000:02:00.1: supports D1 D2
[    0.572589] pci 0000:00:02.0: PCI bridge to [bus 02]
[    0.572594] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.572596] pci 0000:00:02.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.572599] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.572656] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[    0.572671] pci 0000:01:00.0: reg 0x10: [io  0xd800-0xd8ff]
[    0.572691] pci 0000:01:00.0: reg 0x18: [mem 0xcffff000-0xcfffffff 64bit pref]
[    0.572703] pci 0000:01:00.0: reg 0x20: [mem 0xcfff8000-0xcfffbfff 64bit pref]
[    0.572712] pci 0000:01:00.0: reg 0x30: [mem 0xfeae0000-0xfeafffff pref]
[    0.572775] pci 0000:01:00.0: supports D1 D2
[    0.572776] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.580590] pci 0000:00:0a.0: PCI bridge to [bus 01]
[    0.580595] pci 0000:00:0a.0:   bridge window [io  0xd000-0xdfff]
[    0.580597] pci 0000:00:0a.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.580600] pci 0000:00:0a.0:   bridge window [mem 0xcff00000-0xcfffffff 64bit pref]
[    0.580687] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
[    0.580695] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.580696] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.580698] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.580699] pci 0000:00:14.4:   bridge window [mem 0xc7f00000-0xdfffffff window] (subtractive decode)
[    0.580700] pci 0000:00:14.4:   bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
[    0.581134] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15)
[    0.581168] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
[    0.581200] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
[    0.581231] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15)
[    0.581262] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.581294] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.581326] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 10 *11 12 14 15)
[    0.581357] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.581410] ACPI: Enabled 1 GPEs in block 00 to 1F
[    0.581519] vgaarb: setting as boot device: PCI:0000:02:00.0
[    0.581521] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.581522] vgaarb: loaded
[    0.581522] vgaarb: bridge control possible 0000:02:00.0
[    0.581606] PCI: Using ACPI for IRQ routing
[    0.590452] PCI: pci_cache_line_size set to 64 bytes
[    0.590500] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.590502] e820: reserve RAM buffer [mem 0xc7eb0000-0xc7ffffff]
[    0.590713] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.590718] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[    0.592763] clocksource: Switched to clocksource hpet
[    0.598265] VFS: Disk quotas dquot_6.6.0
[    0.608802] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.620861] pnp: PnP ACPI init
[    0.620928] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.621159] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.621160] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.621163] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.621273] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    0.621274] system 00:02: [io  0x040b] has been reserved
[    0.621276] system 00:02: [io  0x04d6] has been reserved
[    0.621277] system 00:02: [io  0x0c00-0x0c01] has been reserved
[    0.621278] system 00:02: [io  0x0c14] has been reserved
[    0.621279] system 00:02: [io  0x0c50-0x0c51] has been reserved
[    0.621281] system 00:02: [io  0x0c52] has been reserved
[    0.621282] system 00:02: [io  0x0c6c] has been reserved
[    0.621283] system 00:02: [io  0x0c6f] has been reserved
[    0.621284] system 00:02: [io  0x0cd0-0x0cd1] has been reserved
[    0.621285] system 00:02: [io  0x0cd2-0x0cd3] has been reserved
[    0.621287] system 00:02: [io  0x0cd4-0x0cd5] has been reserved
[    0.621288] system 00:02: [io  0x0cd6-0x0cd7] has been reserved
[    0.621289] system 00:02: [io  0x0cd8-0x0cdf] has been reserved
[    0.621290] system 00:02: [io  0x0800-0x089f] has been reserved
[    0.621291] system 00:02: [io  0x0b00-0x0b0f] has been reserved
[    0.621293] system 00:02: [io  0x0b20-0x0b3f] has been reserved
[    0.621294] system 00:02: [io  0x0900-0x090f] has been reserved
[    0.621295] system 00:02: [io  0x0910-0x091f] has been reserved
[    0.621296] system 00:02: [io  0xfe00-0xfefe] has been reserved
[    0.621298] system 00:02: [mem 0xffb80000-0xffbfffff] has been reserved
[    0.621299] system 00:02: [mem 0xfec10000-0xfec1001f] has been reserved
[    0.621301] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.621338] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.621381] pnp 00:04: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    0.621517] pnp 00:05: [dma 0 disabled]
[    0.621558] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.621634] system 00:06: [io  0x0280-0x028f] has been reserved
[    0.621636] system 00:06: [io  0x0290-0x029f] has been reserved
[    0.621638] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.621678] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[    0.621680] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.621776] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.621778] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.621779] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.621780] system 00:08: [mem 0x00100000-0xc7efffff] could not be reserved
[    0.621782] system 00:08: [mem 0xfec00000-0xffffffff] could not be reserved
[    0.621783] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.621855] pnp: PnP ACPI: found 9 devices
[    0.628006] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.628026] pci 0000:00:02.0: PCI bridge to [bus 02]
[    0.628028] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.628031] pci 0000:00:02.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.628033] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.628036] pci 0000:00:0a.0: PCI bridge to [bus 01]
[    0.628037] pci 0000:00:0a.0:   bridge window [io  0xd000-0xdfff]
[    0.628039] pci 0000:00:0a.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.628041] pci 0000:00:0a.0:   bridge window [mem 0xcff00000-0xcfffffff 64bit pref]
[    0.628044] pci 0000:00:14.4: PCI bridge to [bus 03]
[    0.628056] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.628057] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.628059] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.628060] pci_bus 0000:00: resource 7 [mem 0xc7f00000-0xdfffffff window]
[    0.628061] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window]
[    0.628062] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.628063] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.628064] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.628066] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.628067] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.628068] pci_bus 0000:01: resource 2 [mem 0xcff00000-0xcfffffff 64bit pref]
[    0.628069] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7 window]
[    0.628070] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff window]
[    0.628071] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.628073] pci_bus 0000:03: resource 7 [mem 0xc7f00000-0xdfffffff window]
[    0.628074] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xfebfffff window]
[    0.684808] NET: Registered protocol family 2
[    0.696854] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.696985] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.697272] TCP: Hash tables configured (established 65536 bind 65536)
[    0.697322] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.697371] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.720798] NET: Registered protocol family 1
[    1.144886] pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    1.144892] PCI: CLS 64 bytes, default 64
[    1.144940] Unpacking initramfs...
[    1.368543] Freeing initrd memory: 17784K (ffff880035d34000 - ffff880036e92000)
[    1.368740] PCI-DMA: Disabling AGP.
[    1.368841] PCI-DMA: aperture base @ bc000000 size 65536 KB
[    1.368842] PCI-DMA: using GART IOMMU.
[    1.368844] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.372736] LVT offset 1 assigned for vector 0x400
[    1.372745] IBS: LVT offset 1 assigned
[    1.372798] perf: AMD IBS detected (0x0000001f)
[    1.384978] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.396829] audit: initializing netlink subsys (disabled)
[    1.396858] audit: type=2000 audit(1488635217.288:1): initialized
[    1.397114] Initialise system trusted keyrings
[    1.397274] workingset: timestamp_bits=37 max_order=21 bucket_order=0
[    1.397294] zbud: loaded
[    1.451031] Key type asymmetric registered
[    1.451033] Asymmetric key parser 'x509' registered
[    1.468833] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.468882] io scheduler noop registered
[    1.468885] io scheduler deadline registered
[    1.480811] io scheduler cfq registered (default)
[    1.481138] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.481142] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.481261] GHES: HEST is not enabled!
[    1.481323] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.501857] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.502192] Linux agpgart interface v0.103
[    1.502217] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.502218] AMD IOMMUv2 functionality not available on this system
[    1.502507] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.505419] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.505423] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.505547] mousedev: PS/2 mouse device common for all mice
[    1.505583] rtc_cmos 00:00: RTC can wake from S4
[    1.505687] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    1.505709] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.505718] ledtrig-cpu: registered to indicate activity on CPUs
[    1.528464] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.580808] NET: Registered protocol family 10
[    1.580987] mip6: Mobile IPv6
[    1.580988] NET: Registered protocol family 17
[    1.580991] mpls_gso: MPLS GSO support
[    1.581150] microcode: microcode updated early to new patch_level=0x010000c8
[    1.581167] microcode: CPU0: patch_level=0x010000c8
[    1.581174] microcode: CPU1: patch_level=0x010000c8
[    1.581182] microcode: CPU2: patch_level=0x010000c8
[    1.581190] microcode: CPU3: patch_level=0x010000c8
[    1.581224] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.581327] registered taskstats version 1
[    1.581328] Loading compiled-in X.509 certificates
[    1.582594] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[    1.582855] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[    1.582872] zswap: loaded using pool lzo/zbud
[    1.583167] rtc_cmos 00:00: setting system clock to 2017-03-04 13:46:58 UTC (1488635218)
[    1.583203] PM: Hibernation image not present or could not be loaded.
[    1.584165] Freeing unused kernel memory: 1352K (ffffffff99914000 - ffffffff99a66000)
[    1.584167] Write protecting the kernel read-only data: 10240k
[    1.584312] Freeing unused kernel memory: 112K (ffff8800193e4000 - ffff880019400000)
[    1.586885] Freeing unused kernel memory: 1308K (ffff8800196b9000 - ffff880019800000)
[    1.592962] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.602783] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.602839] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.602847] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.603474] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.603512] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.603710] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available) 

[towo]

Langsam sollte doch jeder hier mitbekommen haben, wie WindowsProfi30Jahre tickt.
Es ist in 99% aller Fälle verbrannte Zeit, ihm helfen zu wollen.

[WindowsProfi30Jahre]

Code: Alles auswählen

 [    1.603751] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.603788] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.603826] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.603867] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.618760] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[    1.624906] SCSI subsystem initialized
[    1.628415] libata version 3.00 loaded.
[    1.629016] ACPI: bus type USB registered
[    1.629042] usbcore: registered new interface driver usbfs
[    1.629050] usbcore: registered new interface driver hub
[    1.629078] usbcore: registered new device driver usb
[    1.630142] ahci 0000:00:11.0: version 3.0
[    1.630411] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    1.630411] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.630415] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc 
[    1.630871] ehci-pci: EHCI PCI platform driver
[    1.631948] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.633592] scsi host0: ahci
[    1.633986] scsi host1: ahci
[    1.634046] scsi host2: ahci
[    1.634111] scsi host3: ahci
[    1.634187] scsi host4: ahci
[    1.634300] scsi host5: ahci
[    1.634336] ata1: SATA max UDMA/133 abar m1024@0xfe9ff800 port 0xfe9ff900 irq 26
[    1.634339] ata2: SATA max UDMA/133 abar m1024@0xfe9ff800 port 0xfe9ff980 irq 26
[    1.634341] ata3: SATA max UDMA/133 abar m1024@0xfe9ff800 port 0xfe9ffa00 irq 26
[    1.634343] ata4: SATA max UDMA/133 abar m1024@0xfe9ff800 port 0xfe9ffa80 irq 26
[    1.634345] ata5: SATA max UDMA/133 abar m1024@0xfe9ff800 port 0xfe9ffb00 irq 26
[    1.634347] ata6: SATA max UDMA/133 abar m1024@0xfe9ff800 port 0xfe9ffb80 irq 26
[    1.634526] ehci-pci 0000:00:12.2: EHCI Host Controller
[    1.634534] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.634537] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.634547] ehci-pci 0000:00:12.2: debug port 1
[    1.634590] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe9ff000
[    1.644823] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.644913] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.644915] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.644917] usb usb1: Product: EHCI Host Controller
[    1.644918] usb usb1: Manufacturer: Linux 4.7.0-1-amd64 ehci_hcd
[    1.644919] usb usb1: SerialNumber: 0000:00:12.2
[    1.645026] hub 1-0:1.0: USB hub found
[    1.645036] hub 1-0:1.0: 6 ports detected
[    1.645333] ehci-pci 0000:00:13.2: EHCI Host Controller
[    1.645338] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.645341] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.645350] ehci-pci 0000:00:13.2: debug port 1
[    1.645384] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe9f6800
[    1.656820] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.656910] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.656913] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.656914] usb usb2: Product: EHCI Host Controller
[    1.656916] usb usb2: Manufacturer: Linux 4.7.0-1-amd64 ehci_hcd
[    1.656917] usb usb2: SerialNumber: 0000:00:13.2
[    1.657039] hub 2-0:1.0: USB hub found
[    1.657051] hub 2-0:1.0: 6 ports detected
[    1.657779] ohci-pci: OHCI PCI platform driver
[    1.658382] scsi host6: pata_atiixp
[    1.658467] scsi host7: pata_atiixp
[    1.658499] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[    1.658500] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[    1.658617] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    1.658623] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[    1.658652] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe9fe000
[    1.716892] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.716894] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.716896] usb usb3: Product: OHCI PCI host controller
[    1.716897] usb usb3: Manufacturer: Linux 4.7.0-1-amd64 ohci_hcd
[    1.716898] usb usb3: SerialNumber: 0000:00:12.0
[    1.717008] hub 3-0:1.0: USB hub found
[    1.717014] hub 3-0:1.0: 3 ports detected
[    1.717191] ohci-pci 0000:00:12.1: OHCI PCI host controller
[    1.717196] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
[    1.717214] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe9fd000
[    1.776827] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.776829] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.776830] usb usb4: Product: OHCI PCI host controller
[    1.776831] usb usb4: Manufacturer: Linux 4.7.0-1-amd64 ohci_hcd
[    1.776832] usb usb4: SerialNumber: 0000:00:12.1
[    1.776942] hub 4-0:1.0: USB hub found
[    1.776948] hub 4-0:1.0: 3 ports detected
[    1.777124] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    1.777128] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[    1.777150] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe9fc000
[    1.836848] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.836850] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.836851] usb usb5: Product: OHCI PCI host controller
[    1.836852] usb usb5: Manufacturer: Linux 4.7.0-1-amd64 ohci_hcd
[    1.836853] usb usb5: SerialNumber: 0000:00:13.0
[    1.836945] hub 5-0:1.0: USB hub found
[    1.836952] hub 5-0:1.0: 3 ports detected
[    1.837118] ohci-pci 0000:00:13.1: OHCI PCI host controller
[    1.837123] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
[    1.837141] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe9f7000
[    1.896831] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.896833] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.896834] usb usb6: Product: OHCI PCI host controller
[    1.896835] usb usb6: Manufacturer: Linux 4.7.0-1-amd64 ohci_hcd
[    1.896836] usb usb6: SerialNumber: 0000:00:13.1
[    1.896944] hub 6-0:1.0: USB hub found
[    1.896951] hub 6-0:1.0: 3 ports detected
[    1.897136] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    1.897141] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
[    1.897159] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe9f5000
[    1.943626] ata2: SATA link down (SStatus 0 SControl 300)
[    1.943655] ata4: SATA link down (SStatus 0 SControl 300)
[    1.943706] ata6: SATA link down (SStatus 0 SControl 300)
[    1.943756] ata5: SATA link down (SStatus 0 SControl 300)
[    1.956807] usb 1-3: new high-speed USB device number 2 using ehci-pci
[    1.956832] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.956834] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.956835] usb usb7: Product: OHCI PCI host controller
[    1.956836] usb usb7: Manufacturer: Linux 4.7.0-1-amd64 ohci_hcd
[    1.956837] usb usb7: SerialNumber: 0000:00:14.5
[    1.956946] hub 7-0:1.0: USB hub found
[    1.956952] hub 7-0:1.0: 2 ports detected
[    2.090210] usb 1-3: New USB device found, idVendor=04a9, idProduct=172c
[    2.090212] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.090214] usb 1-3: Product: MX850 series
[    2.090215] usb 1-3: Manufacturer: Canon
[    2.090216] usb 1-3: SerialNumber: 20DF29
[    2.092632] usb-storage 1-3:1.2: USB Mass Storage device detected
[    2.092818] scsi host8: usb-storage 1-3:1.2
[    2.092881] usbcore: registered new interface driver usb-storage
[    2.093539] usbcore: registered new interface driver uas
[    2.100831] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.100856] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.101849] ata1.00: ATA-7: Hitachi HUA721010KLA330, GKAOAB0A, max UDMA/133
[    2.101851] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    2.103021] ata1.00: configured for UDMA/133
[    2.103189] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HUA72101 AB0A PQ: 0 ANSI: 5
[    2.103820] ata3.00: ATAPI: HL-DT-ST DVDRAM GH24NS50, XP02, max UDMA/100
[    2.107649] ata3.00: configured for UDMA/100
[    2.132320] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH24NS50  XP02 PQ: 0 ANSI: 5
[    2.148886] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    2.148926] sd 0:0:0:0: [sda] Write Protect is off
[    2.148927] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.148940] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.164588] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.164590] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.164704] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.323449]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18 >
[    2.324269] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.372820] tsc: Refined TSC clocksource calibration: 3718.499 MHz
[    2.372823] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6b333373851, max_idle_ns: 881590657422 ns
[    3.094177] scsi 8:0:0:0: Direct-Access     Canon    MX850 series     1030 PQ: 0 ANSI: 2
[    3.097306] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[    3.104869] input: ImPS/2 BYD TouchPad as /devices/platform/i8042/serio1/input/input2
[    3.372913] clocksource: Switched to clocksource tsc
[    4.009243] random: nonblocking pool is initialized
[    4.644864] floppy0: no floppy controllers found
[    4.671430] PM: Starting manual resume from disk
[    4.671434] PM: Hibernation image partition 259:0 present
[    4.671435] PM: Looking for hibernation image.
[    4.686420] PM: Image not found (code -22)
[    4.686423] PM: Hibernation image not present or could not be loaded.
[    5.149539] EXT4-fs (sda17): mounted filesystem with ordered data mode. Opts: (null)
[    6.003757] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
[    6.233496] ip_tables: (C) 2000-2006 Netfilter Core Team
[    6.321649] systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    6.321809] systemd[1]: Detected architecture x86-64.
[    6.324259] systemd[1]: Set hostname to <Debian9Stretch>.
[    6.993604] systemd[1]: Configuration file /lib/systemd/system/esets.service is marked executable. Please remove executable permission bits. Proceeding anyway.
[    7.023722] systemd[1]: Reached target Remote File Systems.
[    7.023786] systemd[1]: Listening on fsck to fsckd communication Socket.
[    7.023814] systemd[1]: Listening on Journal Socket.
[    7.023924] systemd[1]: Created slice System Slice.
[    7.032949] systemd[1]: Mounting Debug File System...
[    7.033005] systemd[1]: Listening on udev Kernel Socket.
[    7.033057] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    7.033090] systemd[1]: Listening on Syslog Socket.
[    7.033122] systemd[1]: Listening on udev Control Socket.
[    7.033255] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    7.033809] systemd[1]: Starting Remount Root and Kernel File Systems...
[    7.033944] systemd[1]: Created slice User and Session Slice.
[    7.033961] systemd[1]: Reached target Slices.
[    7.034016] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.034066] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    7.156992] systemd[1]: Starting Load Kernel Modules...
[    7.157070] systemd[1]: Listening on Journal Audit Socket.
[    7.157624] systemd[1]: Mounting Huge Pages File System...
[    7.157646] systemd[1]: Reached target Encrypted Volumes.
[    7.157806] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    7.157818] systemd[1]: Reached target User and Group Name Lookups.
[    7.158379] systemd[1]: Mounting POSIX Message Queue File System...
[    7.159034] systemd[1]: Starting Set the console keyboard layout...
[    7.159175] systemd[1]: Created slice system-getty.slice.
[    7.159223] systemd[1]: Listening on Journal Socket (/dev/log).
[    7.159803] systemd[1]: Starting Journal Service...
[    7.160458] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    7.254450] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    7.265008] systemd[1]: Starting Create Static Device Nodes in /dev...
[    7.307510] systemd[1]: Started Journal Service.
[    7.592344] lp: driver loaded but no devices found
[    7.668296] ppdev: user-space parallel port driver
[    7.702372] EXT4-fs (sda17): re-mounted. Opts: errors=remount-ro
[    7.830274] systemd-journald[228]: Received request to flush runtime journal from PID 1
[    8.430093] acpi_cpufreq: overriding BIOS provided _PSD data
[    8.485021] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[    8.485035] ACPI: Power Button [PWRB]
[    8.485185] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    8.485192] ACPI: Power Button [PWRF]
[    8.492020] wmi: Mapper loaded
[    8.535113] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    8.626954] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    8.626994] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    8.627033] sd 8:0:0:0: Attached scsi generic sg2 type 0
[    8.642363] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20160422/utaddress-255)
[    8.642370] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.699283] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[    8.699421] sp5100_tco: PCI Vendor ID: 0x1002, Device ID: 0x4385, Revision ID: 0x3c
[    8.699449] sp5100_tco: failed to find MMIO address, giving up.
[    8.757940] [drm] Initialized drm 1.1.0 20060810
[    8.818237] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    9.309210] snd_hda_intel 0000:02:00.1: Handle vga_switcheroo audio client
[    9.344495] kvm: Nested Virtualization enabled
[    9.344508] kvm: Nested Paging enabled
[    9.345019] snd_hda_codec_via hdaudioC0D0: autoconfig for VT1708S: line_outs=4 (0x1c/0x19/0x22/0x23/0x0) type:line
[    9.345032] snd_hda_codec_via hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    9.345039] snd_hda_codec_via hdaudioC0D0:    hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
[    9.345045] snd_hda_codec_via hdaudioC0D0:    mono: mono_out=0x0
[    9.345050] snd_hda_codec_via hdaudioC0D0:    dig-out=0x20/0x0
[    9.345054] snd_hda_codec_via hdaudioC0D0:    inputs:
[    9.345060] snd_hda_codec_via hdaudioC0D0:      Rear Mic=0x1a
[    9.345066] snd_hda_codec_via hdaudioC0D0:      Front Mic=0x1e
[    9.345071] snd_hda_codec_via hdaudioC0D0:      Line=0x1b
[    9.345076] snd_hda_codec_via hdaudioC0D0:      CD=0x1f
[    9.352959] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card1/input6
[    9.355715] [drm] radeon kernel modesetting enabled.
[    9.356799] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[    9.356843] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[    9.356885] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[    9.356933] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[    9.356972] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[    9.357018] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[    9.357070] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[    9.357108] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
[    9.463365] CRAT table not found
[    9.463373] Finished initializing topology ret=0
[    9.463784] kfd kfd: Initialized module
[    9.481113] [drm] initializing kernel modesetting (RV710 0x1002:0x954F 0x1462:0x1619 0x00).
[    9.481133] [drm] register mmio base: 0xFEBF0000
[    9.481135] [drm] register mmio size: 65536
[    9.481801] ATOM BIOS: 113
[    9.481832] radeon 0000:02:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[    9.481834] radeon 0000:02:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[    9.481836] [drm] Detected VRAM RAM=1024M, BAR=256M
[    9.481837] [drm] RAM width 64bits DDR
[    9.481956] [TTM] Zone  kernel: Available graphics memory: 4089064 kiB
[    9.481957] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    9.481958] [TTM] Initializing pool allocator
[    9.481965] [TTM] Initializing DMA pool allocator
[    9.481986] [drm] radeon: 1024M of VRAM memory ready
[    9.481987] [drm] radeon: 1024M of GTT memory ready.
[    9.481997] [drm] Loading RV710 Microcode
[    9.491946] radeon 0000:02:00.0: firmware: direct-loading firmware radeon/RV710_pfp.bin
[    9.492244] radeon 0000:02:00.0: firmware: direct-loading firmware radeon/RV710_me.bin
[    9.499389] radeon 0000:02:00.0: firmware: direct-loading firmware radeon/R700_rlc.bin
[    9.499847] radeon 0000:02:00.0: firmware: direct-loading firmware radeon/RV710_smc.bin
[    9.499858] [drm] Internal thermal controller with fan control
[    9.500592] [drm] radeon: dpm initialized
[    9.509793] radeon 0000:02:00.0: firmware: direct-loading firmware radeon/RV710_uvd.bin
[    9.509853] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    9.512833] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[    9.532253] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000).
[    9.532326] radeon 0000:02:00.0: WB enabled
[    9.532334] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88022bd5cc00
[    9.532341] radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88022bd5cc0c
[    9.532724] radeon 0000:02:00.0: fence driver on ring 5 use gpu addr 0x000000000005c598 and cpu addr 0xffffc9000101c598
[    9.532726] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    9.532727] [drm] Driver supports precise vblank timestamp query.
[    9.532728] radeon 0000:02:00.0: radeon: MSI limited to 32-bit
[    9.532758] radeon 0000:02:00.0: radeon: using MSI.
[    9.532781] [drm] radeon: irq initialized.
[    9.578600] [drm] ring test on 0 succeeded in 1 usecs
[    9.578605] [drm] ring test on 3 succeeded in 2 usecs
[    9.763192] [drm] ring test on 5 succeeded in 1 usecs
[    9.763203] [drm] UVD initialized successfully.
[    9.763517] [drm] ib test on ring 0 succeeded in 0 usecs
[    9.763544] [drm] ib test on ring 3 succeeded in 0 usecs
[   10.047673] usblp 1-3:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x04A9 pid 0x172C
[   10.048356] usblp 1-3:1.3: usblp1: USB Bidirectional printer dev 2 if 3 alt 0 proto 2 vid 0x04A9 pid 0x172C
[   10.048372] usbcore: registered new interface driver usblp
[   10.421008] [drm] ib test on ring 5 succeeded
[   10.422152] [drm] Radeon Display Connectors
[   10.422160] [drm] Connector 0:
[   10.422164] [drm]   VGA-1
[   10.422170] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[   10.422173] [drm]   Encoders:
[   10.422176] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[   10.422179] [drm] Connector 1:
[   10.422182] [drm]   HDMI-A-1
[   10.422185] [drm]   HPD1
[   10.422189] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[   10.422192] [drm]   Encoders:
[   10.422195] [drm]     DFP1: INTERNAL_UNIPHY
[   10.422198] [drm] Connector 2:
[   10.422200] [drm]   DVI-I-1
[   10.422203] [drm]   HPD4
[   10.422207] [drm]   DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
[   10.422210] [drm]   Encoders:
[   10.422213] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   10.422216] [drm]     DFP2: INTERNAL_UNIPHY2
[   10.469893] [drm] fb mappable at 0xD034D000
[   10.469894] [drm] vram apper at 0xD0000000
[   10.469895] [drm] size 8294400
[   10.469896] [drm] fb depth is 24
[   10.469896] [drm]    pitch is 7680
[   10.470026] fbcon: radeondrmfb (fb0) is primary device
[   10.493441] Console: switching to colour frame buffer device 240x67
[   10.501064] radeon 0000:02:00.0: fb0: radeondrmfb frame buffer device
[   10.518742] [drm] Initialized radeon 2.45.0 20080528 for 0000:02:00.0 on minor 0
[   11.581045] floppy0: no floppy controllers found
[   12.666437] Adding 18180092k swap on /dev/sda16.  Priority:-1 extents:1 across:18180092k FS
[   13.434859] EXT4-fs (sda18): mounted filesystem with ordered data mode. Opts: (null)
[   24.072058] usblp0: removed
[   24.074610] usblp 1-3:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x04A9 pid 0x172C
[   24.074750] usblp1: removed
[   24.076128] usblp 1-3:1.3: usblp1: USB Bidirectional printer dev 2 if 3 alt 0 proto 2 vid 0x04A9 pid 0x172C
[   50.915131] fuse init (API version 7.25)
root@Debian9Stretch:/home/guenter#  

[DeletedUserReAsG]

… wenn’s kein Troll wäre, würde ich ja auf „Wichtiger Hinweis: - Lange Codezeilen/Logs gehören nach NoPaste, in Deinen Beitrag dann der passende Link dazu.“ aufmerksam machen, der beim Posten jeden Beitrages zu lesen ist. Aber so ist’s halt unwahrscheinlich, dass es überhaupt zur Kenntnis genommen wird

[WindowsProfi30Jahre]

https://unixblogger.com/2016/08/11/how- ... ted-guide/

Danke für diesen Link, leider ist das mal wieder alles Englisch, die Übersetzung durch google ist chaotisch und unverständlich, nach über 5 Jahren sollte es das Problem doch jetzt endlich durch die Entwickler von Debian gelöst sein, Zeit war ja genug Tschüss WindowsProfi30Jahre

[WindowsProfi30Jahre]

Hallo,

hier zum Schluss noch uname -a

Code: Alles auswählen

  guenter@Debian9Stretch:~$ uname -a
Linux Debian9Stretch 4.7.0-1-amd64 #1 SMP Debian 4.7.6-1 (2016-10-07) x86_64 GNU/Linux
guenter@Debian9Stretch:~$  

Nochmals, wann kann ich als Nutzer von Debian damit rechnen, dass nonfree Treibersoftware endlich richtig und korrekt installiert wird, gemäß der Hardware die auch verbaut ist, nach über 6 Jahren sollte das doch
kein Problem mehr darstellen, Zeit war genug.

Code: Alles auswählen

 Teddybear hat geschrieben:
https://unixblogger.com/2016/08/11/how-to-get-your-realtek-rtl8111rtl8168-working-updated-guide/ 

Tschüss

WindowsProfi30Jahre

[simpel]

... wann kann ich als Nutzer von Debian damit rechnen, dass nonfree Treibersoftware endlich richtig und korrekt installiert wird ...

Es ist ungefähr so, als wenn du in ein vegetarisches Restaurant gehst und fragst, wann sie endlich Curry Pommes Schranke im Angebot haben ...

Edit: ... will also heißen, dass kann noch dauern!

[TRex]

https://unixblogger.com/2016/08/11/how- ... ted-guide/

Danke für diesen Link, leider ist das mal wieder alles Englisch, die Übersetzung durch google ist chaotisch und unverständlich, nach über 5 Jahren sollte es das Problem doch jetzt endlich durch die Entwickler von Debian gelöst sein, Zeit war ja genug Tschüss WindowsProfi30Jahre

5 Jahre? Welch Zufall, so lange bist du auch schon hier, und hast kein bisschen dazu gelernt. Normalerweise verschieb ich sowas wie dein dmesg selbst schnell nach nopaste, um den Thread lesbar zu halten... aber wozu? Egal, wie man versucht, dir zu helfen, es bleibt nichts hängen. Du verstehst nichts von dem, was man von dir wissen will (danke fürs ausführen von "resp.", sehr aufschlussreich).

[rendegast]

In Deinem dmesg findet sich noch nicht mal ein Versuch des Ladens r816*.
(Das ist unabhängig davon, ob eine passende firmware zur Verfügung stünde)

Gibt es ein solches Modul bei Deinem kernel, oder ist es vielleicht blacklisted?

Code: Alles auswählen

modprobe -c | grep "d00008168"

modprobe -c | grep r816

[Teddybear]

Nochmals, wann kann ich als Nutzer von Debian damit rechnen, dass nonfree Treibersoftware endlich richtig und korrekt installiert wird, gemäß der Hardware die auch verbaut ist, nach über 6 Jahren sollte das doch
kein Problem mehr darstellen, Zeit war genug.

Das wird bei debian wohl nie passieren.
NON-FREE wird von hause aus nie out of the box laufen.

Ich sehe da nur 2 Möglichkeiten:
- finde dich damit ab und lerne damit umzugehen
- such dir ne andere Distribution, wo alles ootb läuft so wie du es haben willst. (selbst Windows kann nicht mit jeder HW von hause aus umgehen)

Habe Fertig

[WindowsProfi30Jahre]

Hallo,

gut, trotzdem kann ich nicht verstehen, wieso dann auf der gleichen Multiboot Installation wie Stretch 9 Debian 8 Jessie problemlos startet, anscheinend wurde hier der Netzwerkkartenwechsel automatisch
erkannt und der richtige Treiber ist dort wohl installiert, denn mit Debian 8 Jessie komme ich problemlos ins Internet. Nur weil Stretch 9 noch Testing ist ?

Wie kann ich jetzt hier den falschen Treiber einfach und sicher löschen und dann den neuen korrekt installieren, ohne Internet Zugang ?

Hier die modprobe:

Code: Alles auswählen

 guenter@Debian9Stretch:~$ su
Passwort: 
root@Debian9Stretch:/home/guenter# modprobe -c | grep "d0008168"
root@Debian9Stretch:/home/guenter# modprobe -c | grep "d00008168"
alias pci:v000010ECd00008168sv*sd*bc*sc*i* r8168
alias pci:v00000001d00008168sv*sd00002410bc*sc*i* r8169
alias pci:v000010ECd00008168sv*sd*bc*sc*i* r8169



root@Debian9Stretch:/home/guenter# modprobe -c | grep r816
alias pci:v00001186d00004300sv00001186sd00004B10bc*sc*i* r8168
alias pci:v000010ECd00008168sv*sd*bc*sc*i* r8168
alias pci:v00000001d00008168sv*sd00002410bc*sc*i* r8169
alias pci:v000010ECd00008129sv*sd*bc*sc*i* r8169
alias pci:v000010ECd00008136sv*sd*bc*sc*i* r8169
alias pci:v000010ECd00008167sv*sd*bc*sc*i* r8169
alias pci:v000010ECd00008168sv*sd*bc*sc*i* r8169
alias pci:v000010ECd00008169sv*sd*bc*sc*i* r8169
alias pci:v00001186d00004300sv*sd*bc*sc*i* r8169
alias pci:v00001186d00004300sv00001186sd00004B10bc*sc*i* r8169
alias pci:v00001186d00004302sv*sd*bc*sc*i* r8169
alias pci:v00001259d0000C107sv*sd*bc*sc*i* r8169
alias pci:v000016ECd00000116sv*sd*bc*sc*i* r8169
alias pci:v00001737d00001032sv*sd00000024bc*sc*i* r8169
root@Debian9Stretch:/home/guenter#  

Hier noch die sourceslist, alles non-free, was mache ich falsch:

Code: Alles auswählen

 # 

# deb cdrom:[Debian GNU/Linux stretch-DI-alpha4 _Stretch_ - Official Snapshot amd64 DVD Binary-1 20151024-18:14]/ stretch contrib main

# deb cdrom:[Debian GNU/Linux stretch-DI-alpha4 _Stretch_ - Official Snapshot amd64 DVD Binary-1 20151024-18:14]/ stretch contrib main

deb http://ftp.de.debian.org/debian/ stretch main contrib non-free
deb-src http://ftp.de.debian.org/debian/ stretch main contrib non-free

deb http://security.debian.org/ stretch/updates main contrib non-free
deb-src http://security.debian.org/ stretch/updates main contrib non-free

# stretch-updates, previously known as 'volatile'
deb http://ftp.de.debian.org/debian/ stretch-updates main contrib non-free
deb-src http://ftp.de.debian.org/debian/ stretch-updates main contrib non-free

# stretch-backports, previously on backports.debian.org
# Line commented out by installer because it failed to verify:
#deb http://ftp.de.debian.org/debian/ stretch-backports main contrib non-free
# Line commented out by installer because it failed to verify:
#deb-src http://ftp.de.debian.org/debian/ stretch-backports main contrib non-free
 

Tschüss WindowsProfi30Jahre

[towo]

Das wird bei debian wohl nie passieren.
NON-FREE wird von hause aus nie out of the box laufen.

Nuja, das stimmt so ja auch nicht ganz, weil Debian auch non-free Images anbietet.
Und auch das wurde dem Herrn Profi schon mehrfach mitgeteilt.

[rendegast]

alias pci:v000010ECd00008168sv*sd*bc*sc*i* r8168
alias pci:v000010ECd00008168sv*sd*bc*sc*i* r8169

Danke dafür, ich gebe jetzt einfach mal Dir selber die Schuld.
Du hast den alten(?) intel-Treiber hinzugefügt, und das nicht richtig.

# modprobe -c | grep r816
<-nix blacklist->

Du könntest es mal mit blacklist eines der beiden Module versuchen.
Wobei in solchen Fällen meiner Erfahrung nach dennoch zumindest eines zum Zuge kommen sollte
(nach modules.order? (wird nicht dynamisch angepaßt), nach alphabetischem Pfad?),
somit eine entsprechende Meldung zu erwarten wäre.

Hast Du das automatische Laden (udev) unterbunden?

Wie kann ich jetzt hier den falschen Treiber einfach und sicher löschen und dann den neuen korrekt installieren, ohne Internet Zugang ?

blacklist
Bis jetzt gibt es keinen "falschen" Treiber, es wird keiner der beiden geladen.



Hilfreich für den r8169, das der kernel mitbringt, dürfte firmware aus firmware-realtek sein.
Das hat aber keinen Einfluß auf einen Ladeversuch.
Das 3rd-party r8168 hat firmware inline? Habe noch nicht damit herumprobiert.

[WindowsProfi30Jahre]

Hier habe ich mal zur Unterscheidung die gleichen Abfragen vom Debian Jessie 8.2 amd64, gleiches Multiboot System gleiche Hardware, trotzdem Unterschiede was die Netzwerkabfrage angeht, wie kann das sein ?
Auch funktioniert problemlos das Netzwerk bzw. der Internetzugang. Recht merkwürdig oder ?

Code: Alles auswählen

 root@Debian82Jessie:/home/guenter# modprobe -c | grep "d00008168"
alias pci:v00000001d00008168sv*sd00002410bc*sc*i* r8169
alias pci:v000010ECd00008168sv*sd*bc*sc*i* r8169
root@Debian82Jessie:/home/guenter# modprobe -c | grep r816
alias pci:v00000001d00008168sv*sd00002410bc*sc*i* r8169
alias pci:v000010ECd00008129sv*sd*bc*sc*i* r8169
alias pci:v000010ECd00008136sv*sd*bc*sc*i* r8169
alias pci:v000010ECd00008167sv*sd*bc*sc*i* r8169
alias pci:v000010ECd00008168sv*sd*bc*sc*i* r8169
alias pci:v000010ECd00008169sv*sd*bc*sc*i* r8169
alias pci:v00001186d00004300sv*sd*bc*sc*i* r8169
alias pci:v00001186d00004300sv00001186sd00004B10bc*sc*i* r8169
alias pci:v00001186d00004302sv*sd*bc*sc*i* r8169
alias pci:v00001259d0000C107sv*sd*bc*sc*i* r8169
alias pci:v000016ECd00000116sv*sd*bc*sc*i* r8169
alias pci:v00001737d00001032sv*sd00000024bc*sc*i* r8169
root@Debian82Jessie:/home/guenter# modprobe -c | grep "d00008111"
root@Debian82Jessie:/home/guenter# modprobe -c | grep "d00008169"
alias pci:v000010ECd00008169sv*sd*bc*sc*i* r8169
root@Debian82Jessie:/home/guenter# 
  

In diesem Zusammenhang möchte ich noch auf diesen Link hinweisen

Code: Alles auswählen

 https://wiki.hetzner.de/index.php/Installation_des_r8168-Treibers

Der r8169-Treiber für den Realtek-Netzwerkchip funktioniert nicht immer korrekt selbst in den neuesten Kernelversionen. Es können Timeouts entstehen, die Netzwerkkarte zwischen den Zuständen link up/link down wechseln oder sogar Systemabstürze vorkommen.
Eine Lösung des Problems besteht in der Installation des offiziellen r8168 Treibers von Realtek statt dem r8169 des Linux Kernels. Dieser Treiber ist in keiner Distributionen enthalten. Er kann unter CentOS aus Fremdrepositories nachinstalliert werden. Bei Debian, Ubuntu und anderen Distributionen muß er aus den Quellen selbst kompiliert und aktiviert werden.
  

Hier noch ein Hinweis aus einem anderen Forum dazu, hilft das vielleicht auch unter Debian weiter ?

Übrigens ist das r8169-Kernel Modul für die Realtek Netzwerkkarten RTL 8111 und RTL 8168 zuständig, genauso wie das originale Realtek Kernel Modul:
http://www.realtek.com.tw/downloads/dow ... Down=false


Tschüss WindowsProfi30Jahre