Dies wird mit folgendem Fehler abgebrochen:
Code: Alles auswählen
[letzter@wuerfel ~]$ ssh ADRESSE.myfritz.net
Linux ptLWL01 3.2.0-4-amd64 #1 SMP Debian 3.2.81-1 x86_64
...
letzter@ptLWL01:~$ su -
Passwort:
root@ptLWL01:~# startx
X.Org X Server 1.12.4
Release Date: 2012-08-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
Current Operating System: Linux ptLWL01 3.2.0-4-amd64 #1 SMP Debian 3.2.81-1 x86_64
Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=/dev/mapper/vg0-root ro quiet
Build Date: 09 February 2015 09:46:52AM
xorg-server 2:1.12.4-6+deb7u6 (Julien Cristau <jcristau@debian.org>)
Current version of pixman: 0.26.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 9 16:22:48 2016
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(II) [KMS] drm report modesetting isn't supported.
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_KLDSCP_DAC1
DDC reg: 0x7e40
Dac detection success
finished output detect: 0
finished all detect
Dac detection success
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
Server terminated with error (1). Closing log file.
^Cxinit: giving up #STRG + C zum Abrechen.
xinit: unable to connect to X server: Connection refused
xinit: unexpected signal 2
39405)Code: Alles auswählen
661966.810] drmOpenDevice: node name is /dev/dri/card15
[661966.819] (EE) RADEON(0): [dri] RADEONDRIGetVersion failed to open the DRM
[dri] Disabling DRI.
[661966.819] (II) RADEON(0): using shadow framebuffer
[661966.819] (II) Loading sub module "shadow"
[661966.819] (II) LoadModule: "shadow"
[661966.819] (II) Loading /usr/lib/xorg/modules/libshadow.so
[661966.819] (II) Module shadow: vendor="X.Org Foundation"
[661966.820] compiled for 1.12.4, module version = 1.1.0
[661966.820] ABI class: X.Org ANSI C Emulation, version 0.4
[661966.820] (II) RADEON(0): Detected total video RAM=32768K, accessible=32768K (PCI BAR=32768K)
[661966.820] (--) RADEON(0): Mapped VideoRAM: 32768 kByte (128 bit DDR SDRAM)
[661966.820] (II) RADEON(0): Color tiling disabled
[661966.820] (II) Loading sub module "ddc"
[661966.820] (II) LoadModule: "ddc"
[661966.820] (II) Module "ddc" already built-in
[661966.820] (II) Loading sub module "i2c"
[661966.820] (II) LoadModule: "i2c"
[661966.820] (II) Module "i2c" already built-in
[661966.820] (II) RADEON(0): PLL parameters: rf=10000 rd=12 min=90000 max=120000; xclk=40000
[661966.820] (II) RADEON(0): Output VGA-0 has no monitor section
[661966.820] (II) RADEON(0): I2C bus "VGA-0" initialized.
[661966.820] (II) RADEON(0): Port0:
[661966.820] XRANDR name: VGA-0
[661966.820] Connector: VGA
[661966.820] CRT1: INTERNAL_KLDSCP_DAC1
[661966.820] DDC reg: 0x7e40
[661966.820] (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
[661966.830] Dac detection success
[661966.830] (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
[661966.830] finished output detect: 0
[661966.830] (EE) RADEON(0): No connected devices found!
[661966.830] finished all detect
[661966.839] Dac detection success
[661966.840] (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
[661966.840] (II) RADEON(0): EDID for output VGA-0
[661966.840] (II) RADEON(0): Output VGA-0 disconnected
[661966.840] (WW) RADEON(0): No outputs definitely connected, trying again...
[661966.840] (II) RADEON(0): Output VGA-0 disconnected
[661966.840] (WW) RADEON(0): Unable to find initial modes
[661966.840] (EE) RADEON(0): No valid modes.
[661966.840] (II) UnloadModule: "radeon"
[661966.840] (II) UnloadSubModule: "shadow"
[661966.840] (II) Unloading shadow
[661966.840] (II) UnloadSubModule: "int10"
[661966.840] (II) Unloading int10
[661966.840] (II) UnloadSubModule: "vgahw"
[661966.841] (II) Unloading vgahw
[661966.841] (EE) Screen(s) found, but none have a usable configuration.
[661966.841]
Fatal server error:
[661966.841] no screens found
[661966.841]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[661966.841] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[661966.841]
[661966.845] Server terminated with error (1). Closing log file.
root@ptLWL01:~# ^CDie sshd des Servers:
Code: Alles auswählen
root@ptLWL01:/etc/ssh# cat /etc/ssh/sshd_config
# Package generated configuration file
# See the sshd_config(5) manpage for details
# What ports, IPs and protocols we listen for
Port 22
# Use these options to restrict which interfaces/protocols sshd will bind to
#ListenAddress ::
#ListenAddress 0.0.0.0
Protocol 2
# HostKeys for protocol version 2
HostKey /etc/ssh/ssh_host_rsa_key
HostKey /etc/ssh/ssh_host_dsa_key
#Privilege Separation is turned on for security
UsePrivilegeSeparation yes
# Lifetime and size of ephemeral version 1 server key
KeyRegenerationInterval 3600
ServerKeyBits 768
# Logging
SyslogFacility AUTH
LogLevel INFO
# Authentication:
LoginGraceTime 120
PermitRootLogin without-password
StrictModes yes
RSAAuthentication yes
PubkeyAuthentication yes
#AuthorizedKeysFile %h/.ssh/authorized_keys
# Don't read the user's ~/.rhosts and ~/.shosts files
IgnoreRhosts yes
# For this to work you will also need host keys in /etc/ssh_known_hosts
RhostsRSAAuthentication no
# similar for protocol version 2
HostbasedAuthentication no
# Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication
#IgnoreUserKnownHosts yes
# To enable empty passwords, change to yes (NOT RECOMMENDED)
PermitEmptyPasswords no
# Change to yes to enable challenge-response passwords (beware issues with
# some PAM modules and threads)
ChallengeResponseAuthentication no
# Change to no to disable tunnelled clear text passwords
#PasswordAuthentication yes
# Kerberos options
#KerberosAuthentication no
#KerberosGetAFSToken no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
# GSSAPI options
#GSSAPIAuthentication no
#GSSAPICleanupCredentials yes
X11Forwarding yes
X11DisplayOffset 10
PrintMotd no
PrintLastLog yes
TCPKeepAlive yes
#UseLogin no
#MaxStartups 10:30:60
#Banner /etc/issue.net
# Allow client to pass locale environment variables
AcceptEnv LANG LC_*
Subsystem sftp /usr/lib/openssh/sftp-server
# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# be allowed through the ChallengeResponseAuthentication and
# PasswordAuthentication. Depending on your PAM configuration,
# PAM authentication via ChallengeResponseAuthentication may bypass
# the setting of "PermitRootLogin without-password".
# If you just want the PAM account and session checks to run without
# PAM authentication, then enable this but set PasswordAuthentication
# and ChallengeResponseAuthentication to 'no'.
UsePAM yes
# eingefügt wegen X11 Forwarding
AddressFamily inet
X11UseLocalhost no
#eingefügt wegen langsamem Starten evrschiedener Anwendungen
usedns no
root@ptLWL01:/etc/ssh# 